initial check-in of ASF 3.39.0

1084 files changed, 587993 insertions, 0 deletions

diff --git a/common2/applications/ek_user_application/main.c b/common2/applications/ek_user_application/main.c
new file mode 100644
index 00000000..3127647c
--- /dev/null
+++ b/common2/applications/ek_user_application/main.c
@@ -0,0 +1,41 @@
+/**
+ * \file
+ *
+ * \brief Empty user application template
+ *
+ */
+
+/**
+ * \mainpage User Application template doxygen documentation
+ *
+ * \par Empty user application template
+ *
+ * This is a bare minimum user application template.
+ *
+ * For documentation of the board, go \ref group_common_boards "here" for a link
+ * to the board-specific documentation.
+ *
+ * \par Content
+ *
+ * -# Include the ASF header files (through asf.h)
+ * -# Minimal main function that starts with a call to system_init()
+ * -# Basic usage of on-board LED and button
+ * -# "Insert application code here" comment
+ *
+ */
+
+/*
+ * Include header files for all drivers that have been imported from
+ * Atmel Software Framework (ASF).
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <asf.h>
+
+int main (void)
+{
+	system_init();
+
+	/* Insert application code here, after the board has been initialized. */
+}
diff --git a/common2/applications/ek_user_application/samr21g18a_samr21zll_ek/config/conf_board.h b/common2/applications/ek_user_application/samr21g18a_samr21zll_ek/config/conf_board.h
new file mode 100644
index 00000000..7185be18
--- /dev/null
+++ b/common2/applications/ek_user_application/samr21g18a_samr21zll_ek/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAMR21ZLL-EK board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/ek_user_application/samr21g18a_samr21zll_ek/config/conf_clocks.h b/common2/applications/ek_user_application/samr21g18a_samr21zll_ek/config/conf_clocks.h
new file mode 100644
index 00000000..5f172826
--- /dev/null
+++ b/common2/applications/ek_user_application/samr21g18a_samr21zll_ek/config/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/main.c b/common2/applications/user_application/main.c
new file mode 100644
index 00000000..a1e1df9c
--- /dev/null
+++ b/common2/applications/user_application/main.c
@@ -0,0 +1,37 @@
+/**
+ * \file
+ *
+ * \brief Empty user application template
+ *
+ */
+
+/**
+ * \mainpage User Application template doxygen documentation
+ *
+ * \par Empty user application template
+ *
+ * Bare minimum empty user application template
+ *
+ * \par Content
+ *
+ * -# Include the ASF header files (through asf.h)
+ * -# Minimal main function that starts with a call to system_init()
+ * -# "Insert application code here" comment
+ *
+ */
+
+/*
+ * Include header files for all drivers that have been imported from
+ * Atmel Software Framework (ASF).
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <asf.h>
+
+int main (void)
+{
+	system_init();
+
+	/* Insert application code here, after the board has been initialized. */
+}
diff --git a/common2/applications/user_application/user_board/config_samb11/conf_board.h b/common2/applications/user_application/user_board/config_samb11/conf_board.h
new file mode 100644
index 00000000..432a859d
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samb11/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samc20/conf_board.h b/common2/applications/user_application/user_board/config_samc20/conf_board.h
new file mode 100644
index 00000000..a1915a1b
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samc20/conf_board.h
@@ -0,0 +1,47 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samc20/conf_clocks.h b/common2/applications/user_application/user_board/config_samc20/conf_clocks.h
new file mode 100644
index 00000000..c17707a1
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samc20/conf_clocks.h
@@ -0,0 +1,187 @@
+/**
+ * \file
+ *
+ * \brief SAM C20 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+ /**
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC48M configuration - Internal 48MHz oscillator */
+#  define CONF_CLOCK_OSC48M_FREQ_DIV              SYSTEM_OSC48M_DIV_12
+#  define CONF_CLOCK_OSC48M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC48M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_PRE    SYSTEM_CLOCK_XOSC_FAILURE_DETECTOR_PRESCALER_1
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_EVENT_OUTPUT_ENABLE  false
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_ENABLE  false
+#  define CONF_CLOCK_XOSC_FAILURE_SWITCH_BACK_ENABLE  false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_PRE    SYSTEM_CLOCK_XOSC32K_FAILURE_DETECTOR_PRESCALER_1
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_EVENT_OUTPUT_ENABLE  false
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_ENABLE  false
+#  define CONF_CLOCK_XOSC32K_FAILURE_SWITCH_BACK_ENABLE  false
+
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32767
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK 32K reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_32K_GENERATOR GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_samc21/conf_board.h b/common2/applications/user_application/user_board/config_samc21/conf_board.h
new file mode 100644
index 00000000..b26d7e3a
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samc21/conf_board.h
@@ -0,0 +1,47 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samc21/conf_clocks.h b/common2/applications/user_application/user_board/config_samc21/conf_clocks.h
new file mode 100644
index 00000000..dc916bc7
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samc21/conf_clocks.h
@@ -0,0 +1,184 @@
+/**
+ * \file
+ *
+ * \brief SAM C21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC48M configuration - Internal 48MHz oscillator */
+#  define CONF_CLOCK_OSC48M_FREQ_DIV              SYSTEM_OSC48M_DIV_12
+#  define CONF_CLOCK_OSC48M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC48M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_PRE    SYSTEM_CLOCK_XOSC_FAILURE_DETECTOR_PRESCALER_1
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_EVENT_OUTPUT_ENABLE  false
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_ENABLE  false
+#  define CONF_CLOCK_XOSC_FAILURE_SWITCH_BACK_ENABLE  false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_PRE    SYSTEM_CLOCK_XOSC32K_FAILURE_DETECTOR_PRESCALER_1
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_EVENT_OUTPUT_ENABLE  false
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_ENABLE  false
+#  define CONF_CLOCK_XOSC32K_FAILURE_SWITCH_BACK_ENABLE  false
+
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32767
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK 32K reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_32K_GENERATOR GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_samd09_d10_d11/conf_board.h b/common2/applications/user_application/user_board/config_samd09_d10_d11/conf_board.h
new file mode 100644
index 00000000..811794a7
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samd09_d10_d11/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samd09_d10_d11/conf_clocks.h b/common2/applications/user_application/user_board/config_samd09_d10_d11/conf_clocks.h
new file mode 100644
index 00000000..cd997fe2
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samd09_d10_d11/conf_clocks.h
@@ -0,0 +1,177 @@
+/**
+ * \file
+ *
+ * \brief SAM D1x Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_samd20/conf_board.h b/common2/applications/user_application/user_board/config_samd20/conf_board.h
new file mode 100644
index 00000000..5a07c33e
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samd20/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samd20/conf_clocks.h b/common2/applications/user_application/user_board/config_samd20/conf_clocks.h
new file mode 100644
index 00000000..45f459db
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samd20/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_samd21/conf_board.h b/common2/applications/user_application/user_board/config_samd21/conf_board.h
new file mode 100644
index 00000000..e277933b
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samd21/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samd21/conf_clocks.h b/common2/applications/user_application/user_board/config_samd21/conf_clocks.h
new file mode 100644
index 00000000..a753608e
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samd21/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_samda/conf_board.h b/common2/applications/user_application/user_board/config_samda/conf_board.h
new file mode 100644
index 00000000..f8ad09d0
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samda/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samda/conf_clocks.h b/common2/applications/user_application/user_board/config_samda/conf_clocks.h
new file mode 100644
index 00000000..b3168de7
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samda/conf_clocks.h
@@ -0,0 +1,197 @@
+/**
+ * \file
+ *
+ * \brief SAM DA1 Clock configuration
+ *
+ * Copyright (C) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         1465 /* (48000000 / 32768) */
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_samha/conf_board.h b/common2/applications/user_application/user_board/config_samha/conf_board.h
new file mode 100644
index 00000000..f8ad09d0
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samha/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samha/conf_clocks.h b/common2/applications/user_application/user_board/config_samha/conf_clocks.h
new file mode 100644
index 00000000..b7b6c929
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samha/conf_clocks.h
@@ -0,0 +1,197 @@
+/**
+ * \file
+ *
+ * \brief SAM HA1 Clock configuration
+ *
+ * Copyright (C) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              512
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         1465 /* (48000000 / 32768) */
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_saml21/conf_board.h b/common2/applications/user_application/user_board/config_saml21/conf_board.h
new file mode 100644
index 00000000..811794a7
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_saml21/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_saml21/conf_clocks.h b/common2/applications/user_application/user_board/config_saml21/conf_clocks.h
new file mode 100644
index 00000000..905b63b2
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_saml21/conf_clocks.h
@@ -0,0 +1,199 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_saml22/conf_board.h b/common2/applications/user_application/user_board/config_saml22/conf_board.h
new file mode 100644
index 00000000..432a859d
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_saml22/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_saml22/conf_clocks.h b/common2/applications/user_application/user_board/config_saml22/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_saml22/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_samr21/conf_board.h b/common2/applications/user_application/user_board/config_samr21/conf_board.h
new file mode 100644
index 00000000..811794a7
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samr21/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samr21/conf_clocks.h b/common2/applications/user_application/user_board/config_samr21/conf_clocks.h
new file mode 100644
index 00000000..a66efed7
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samr21/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/config_samr30/conf_board.h b/common2/applications/user_application/user_board/config_samr30/conf_board.h
new file mode 100644
index 00000000..c4a44551
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samr30/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/applications/user_application/user_board/config_samr30/conf_clocks.h b/common2/applications/user_application/user_board/config_samr30/conf_clocks.h
new file mode 100644
index 00000000..e79db9bb
--- /dev/null
+++ b/common2/applications/user_application/user_board/config_samr30/conf_clocks.h
@@ -0,0 +1,199 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/user_application/user_board/doxygen/doxyfile.doxygen b/common2/applications/user_application/user_board/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..de3501dc
--- /dev/null
+++ b/common2/applications/user_application/user_board/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "User board project template for SAMB11G18A"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../main.c ../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../sam0/utils/cmsis/samb11/source/system_samb11.c ../../../../boards/user_board/init.c ../config_samb11/conf_board.h ../../../../../common/boards/board.h ../../../../../sam0/utils/compiler.h ../../../../../sam0/utils/header_files/io.h ../../../../../sam0/utils/status_codes.h ../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../sam0/utils/preprocessor/stringz.h ../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../common/utils/interrupt.h ../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../common/utils/parts.h ../../../../../sam0/utils/cmsis/samb11/include/btlc1000wlcsp.h ../../../../../sam0/utils/cmsis/samb11/include/samb11.h ../../../../../sam0/utils/cmsis/samb11/include/samb11g18a.h ../../../../../sam0/utils/cmsis/samb11/include/samb11zr.h ../../../../../sam0/utils/cmsis/samb11/include/component/aon_gp_regs.h ../../../../../sam0/utils/cmsis/samb11/include/component/aon_pwr_seq.h ../../../../../sam0/utils/cmsis/samb11/include/component/aon_sleep_timer.h ../../../../../sam0/utils/cmsis/samb11/include/component/arm_bpu.h ../../../../../sam0/utils/cmsis/samb11/include/component/arm_dwt.h ../../../../../sam0/utils/cmsis/samb11/include/component/arm_rom.h ../../../../../sam0/utils/cmsis/samb11/include/component/arm_sysctrl.h ../../../../../sam0/utils/cmsis/samb11/include/component/dualtimer.h ../../../../../sam0/utils/cmsis/samb11/include/component/efuse_misc_regs.h ../../../../../sam0/utils/cmsis/samb11/include/component/gpio.h ../../../../../sam0/utils/cmsis/samb11/include/component/i2c.h ../../../../../sam0/utils/cmsis/samb11/include/component/lp_clk_cal_regs.h ../../../../../sam0/utils/cmsis/samb11/include/component/lpmcu_misc_regs.h ../../../../../sam0/utils/cmsis/samb11/include/component/prov_dma_ctrl.h ../../../../../sam0/utils/cmsis/samb11/include/component/spi.h ../../../../../sam0/utils/cmsis/samb11/include/component/spi_flash.h ../../../../../sam0/utils/cmsis/samb11/include/component/timer.h ../../../../../sam0/utils/cmsis/samb11/include/component/uart.h ../../../../../sam0/utils/cmsis/samb11/include/component/wdt.h ../../../../../sam0/utils/cmsis/samb11/include/instance/aon_gp_regs0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/aon_pwr_seq0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/aon_sleep_timer0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/arm_bpu0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/arm_dwt0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/arm_rom0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/arm_sysctrl0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/dualtimer0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/efuse_misc_regs0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/gpio0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/gpio1.h ../../../../../sam0/utils/cmsis/samb11/include/instance/gpio2.h ../../../../../sam0/utils/cmsis/samb11/include/instance/i2c0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/i2c1.h ../../../../../sam0/utils/cmsis/samb11/include/instance/lp_clk_cal_regs0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/lpmcu_misc_regs0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/prov_dma_ctrl0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/spi0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/spi1.h ../../../../../sam0/utils/cmsis/samb11/include/instance/spi_flash0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/timer0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/uart0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/uart1.h ../../../../../sam0/utils/cmsis/samb11/include/instance/wdt0.h ../../../../../sam0/utils/cmsis/samb11/include/instance/wdt1.h ../../../../../sam0/utils/cmsis/samb11/include/pio/btlc1000wlcsp.h ../../../../../sam0/utils/cmsis/samb11/include/pio/samb11g18a.h ../../../../../sam0/utils/cmsis/samb11/include/pio/samb11zr.h ../../../../../sam0/utils/cmsis/samb11/source/system_samb11.h ../../../../boards/user_board/user_board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../config_samb11 ../../../../../common/boards ../../../../../sam0/utils ../../../../../sam0/utils/header_files ../../../../../sam0/utils/preprocessor ../../../../../common/utils ../../../../../sam0/utils/cmsis/samb11/include ../../../../../sam0/utils/cmsis/samb11/source ../../../../boards/user_board
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true BOARD=USER_BOARD __SAMB11G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/applications/xplained_mini_user_application/main.c b/common2/applications/xplained_mini_user_application/main.c
new file mode 100644
index 00000000..8482ab62
--- /dev/null
+++ b/common2/applications/xplained_mini_user_application/main.c
@@ -0,0 +1,53 @@
+/**
+ * \file
+ *
+ * \brief Empty user application template
+ *
+ */
+
+/**
+ * \mainpage User Application template doxygen documentation
+ *
+ * \par Empty user application template
+ *
+ * This is a bare minimum user application template.
+ *
+ * For documentation of the board, go \ref group_common_boards "here" for a link
+ * to the board-specific documentation.
+ *
+ * \par Content
+ *
+ * -# Include the ASF header files (through asf.h)
+ * -# Minimal main function that starts with a call to system_init()
+ * -# Basic usage of on-board LED and button
+ * -# "Insert application code here" comment
+ *
+ */
+
+/*
+ * Include header files for all drivers that have been imported from
+ * Atmel Software Framework (ASF).
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <asf.h>
+
+int main (void)
+{
+	system_init();
+
+	/* Insert application code here, after the board has been initialized. */
+
+	/* This skeleton code simply sets the LED to the state of the button. */
+	while (1) {
+		/* Is button pressed? */
+		if (port_pin_get_input_level(BUTTON_0_PIN) == BUTTON_0_ACTIVE) {
+			/* Yes, so turn LED on. */
+			port_pin_set_output_level(LED_0_PIN, LED_0_ACTIVE);
+		} else {
+			/* No, so turn LED off. */
+			port_pin_set_output_level(LED_0_PIN, !LED_0_ACTIVE);
+		}
+	}
+}
diff --git a/common2/applications/xplained_mini_user_application/samd10d14am_samd10_xplained_mini/config/conf_board.h b/common2/applications/xplained_mini_user_application/samd10d14am_samd10_xplained_mini/config/conf_board.h
new file mode 100644
index 00000000..2f42feb3
--- /dev/null
+++ b/common2/applications/xplained_mini_user_application/samd10d14am_samd10_xplained_mini/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D10 Xplained Mini board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_mini_user_application/samd10d14am_samd10_xplained_mini/config/conf_clocks.h b/common2/applications/xplained_mini_user_application/samd10d14am_samd10_xplained_mini/config/conf_clocks.h
new file mode 100644
index 00000000..28dcf60b
--- /dev/null
+++ b/common2/applications/xplained_mini_user_application/samd10d14am_samd10_xplained_mini/config/conf_clocks.h
@@ -0,0 +1,177 @@
+/**
+ * \file
+ *
+ * \brief SAM D10 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/btlc1000wlcsp_samb11csp_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/btlc1000wlcsp_samb11csp_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..3c0b8a83
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/btlc1000wlcsp_samb11csp_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM B11 CSP Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/main.c b/common2/applications/xplained_pro_user_application/main.c
new file mode 100644
index 00000000..8482ab62
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/main.c
@@ -0,0 +1,53 @@
+/**
+ * \file
+ *
+ * \brief Empty user application template
+ *
+ */
+
+/**
+ * \mainpage User Application template doxygen documentation
+ *
+ * \par Empty user application template
+ *
+ * This is a bare minimum user application template.
+ *
+ * For documentation of the board, go \ref group_common_boards "here" for a link
+ * to the board-specific documentation.
+ *
+ * \par Content
+ *
+ * -# Include the ASF header files (through asf.h)
+ * -# Minimal main function that starts with a call to system_init()
+ * -# Basic usage of on-board LED and button
+ * -# "Insert application code here" comment
+ *
+ */
+
+/*
+ * Include header files for all drivers that have been imported from
+ * Atmel Software Framework (ASF).
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <asf.h>
+
+int main (void)
+{
+	system_init();
+
+	/* Insert application code here, after the board has been initialized. */
+
+	/* This skeleton code simply sets the LED to the state of the button. */
+	while (1) {
+		/* Is button pressed? */
+		if (port_pin_get_input_level(BUTTON_0_PIN) == BUTTON_0_ACTIVE) {
+			/* Yes, so turn LED on. */
+			port_pin_set_output_level(LED_0_PIN, LED_0_ACTIVE);
+		} else {
+			/* No, so turn LED off. */
+			port_pin_set_output_level(LED_0_PIN, !LED_0_ACTIVE);
+		}
+	}
+}
diff --git a/common2/applications/xplained_pro_user_application/main_sam_b.c b/common2/applications/xplained_pro_user_application/main_sam_b.c
new file mode 100644
index 00000000..78c292d4
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/main_sam_b.c
@@ -0,0 +1,54 @@
+/**
+ * \file
+ *
+ * \brief Empty user application template
+ *
+ */
+
+/**
+ * \mainpage User Application template doxygen documentation
+ *
+ * \par Empty user application template
+ *
+ * This is a bare minimum user application template.
+ *
+ * For documentation of the board, go \ref group_common_boards "here" for a link
+ * to the board-specific documentation.
+ *
+ * \par Content
+ *
+ * -# Include the ASF header files (through asf.h)
+ * -# Minimal main function that starts with a call to system_init()
+ * -# Basic usage of on-board LED and button
+ * -# "Insert application code here" comment
+ *
+ */
+
+/*
+ * Include header files for all drivers that have been imported from
+ * Atmel Software Framework (ASF).
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+/*
+  Since we do not properly generate system init code, we define DONT_USE_CMSIS_INIT
+  before including the device headers. We also comment out the call to SystemInit().
+*/
+
+
+#define DONT_USE_CMSIS_INIT
+#include <asf.h>
+
+
+int main(void)
+{
+    /* Initialize the SAM system */
+    /* SystemInit(); */
+
+    /* Replace with your application code */
+    while (1) 
+    {
+    }
+}
diff --git a/common2/applications/xplained_pro_user_application/samb11g18a_samb11_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samb11g18a_samb11_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..69a04ced
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samb11g18a_samb11_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAMB11 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samb11zr_samb11zr_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samb11zr_samb11zr_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..8639301d
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samb11zr_samb11zr_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM B11 ZR Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samc21j18a_samc21_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samc21j18a_samc21_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..10d443fd
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samc21j18a_samc21_xplained_pro/config/conf_board.h
@@ -0,0 +1,47 @@
+/**
+ * \file
+ *
+ * \brief SAM C21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samc21j18a_samc21_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samc21j18a_samc21_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..dc916bc7
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samc21j18a_samc21_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,184 @@
+/**
+ * \file
+ *
+ * \brief SAM C21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC48M configuration - Internal 48MHz oscillator */
+#  define CONF_CLOCK_OSC48M_FREQ_DIV              SYSTEM_OSC48M_DIV_12
+#  define CONF_CLOCK_OSC48M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC48M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_PRE    SYSTEM_CLOCK_XOSC_FAILURE_DETECTOR_PRESCALER_1
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_EVENT_OUTPUT_ENABLE  false
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_ENABLE  false
+#  define CONF_CLOCK_XOSC_FAILURE_SWITCH_BACK_ENABLE  false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_PRE    SYSTEM_CLOCK_XOSC32K_FAILURE_DETECTOR_PRESCALER_1
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_EVENT_OUTPUT_ENABLE  false
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_ENABLE  false
+#  define CONF_CLOCK_XOSC32K_FAILURE_SWITCH_BACK_ENABLE  false
+
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32767
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK 32K reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_32K_GENERATOR GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/samd11d14a_samd11_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samd11d14a_samd11_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..41c619a1
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samd11d14a_samd11_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samd11d14a_samd11_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samd11d14a_samd11_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..dba9b749
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samd11d14a_samd11_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,177 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/samd20j18_samd20_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samd20j18_samd20_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..a1d6bfe3
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samd20j18_samd20_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samd20j18_samd20_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samd20j18_samd20_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..45f459db
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samd20j18_samd20_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/samd21g18a_samw25_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samd21g18a_samw25_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..ecd54925
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samd21g18a_samw25_xplained_pro/config/conf_board.h
@@ -0,0 +1,47 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samd21g18a_samw25_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samd21g18a_samw25_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..e33140f9
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samd21g18a_samw25_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,197 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_4096
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_10
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         1465//(48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_NO_TIMEOUT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_REF0
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/samd21j18a_samd21_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samd21j18a_samd21_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..52087745
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samd21j18a_samd21_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samd21j18a_samd21_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samd21j18a_samd21_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..a753608e
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samd21j18a_samd21_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/samda1j16a_samda1_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samda1j16a_samda1_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..5369139f
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samda1j16a_samda1_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM DA1 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samda1j16a_samda1_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samda1j16a_samda1_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..18a1c9ec
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samda1j16a_samda1_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM DA1 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/samha1g16a_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samha1g16a_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..edff7e22
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samha1g16a_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM HA1G16A Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samha1g16a_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samha1g16a_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..7783fe0a
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samha1g16a_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM HA1G16A Clock configuration
+ *
+ * Copyright (C) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              512
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         1465/* (48000000 / 32768) */
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/saml21j18a_saml21_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/saml21j18a_saml21_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/saml21j18a_saml21_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/saml21j18a_saml21_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/saml21j18a_saml21_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..f76e755e
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/saml21j18a_saml21_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,199 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/saml21j18b_saml21_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/saml21j18b_saml21_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/saml21j18b_saml21_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/saml21j18b_saml21_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/saml21j18b_saml21_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..169a76f0
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/saml21j18b_saml21_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro_b/config/conf_board.h b/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro_b/config/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro_b/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro_b/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro_b/config/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/saml22n18a_saml22_xplained_pro_b/config/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/samr21g18a_samr21_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samr21g18a_samr21_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..4ab06fb9
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samr21g18a_samr21_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAMR21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samr21g18a_samr21_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samr21g18a_samr21_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..a66efed7
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samr21g18a_samr21_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/applications/xplained_pro_user_application/samr30g18a_samr30_xplained_pro/config/conf_board.h b/common2/applications/xplained_pro_user_application/samr30g18a_samr30_xplained_pro/config/conf_board.h
new file mode 100644
index 00000000..29176c86
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samr30g18a_samr30_xplained_pro/config/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/applications/xplained_pro_user_application/samr30g18a_samr30_xplained_pro/config/conf_clocks.h b/common2/applications/xplained_pro_user_application/samr30g18a_samr30_xplained_pro/config/conf_clocks.h
new file mode 100644
index 00000000..c676bea5
--- /dev/null
+++ b/common2/applications/xplained_pro_user_application/samr30g18a_samr30_xplained_pro/config/conf_clocks.h
@@ -0,0 +1,199 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/boards/user_board/board_config/conf_board.h b/common2/boards/user_board/board_config/conf_board.h
new file mode 100644
index 00000000..7b88c97f
--- /dev/null
+++ b/common2/boards/user_board/board_config/conf_board.h
@@ -0,0 +1,14 @@
+/**
+ * \file
+ *
+ * \brief User board configuration template
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
diff --git a/common2/boards/user_board/init.c b/common2/boards/user_board/init.c
new file mode 100644
index 00000000..dc43114e
--- /dev/null
+++ b/common2/boards/user_board/init.c
@@ -0,0 +1,28 @@
+/**
+ * \file
+ *
+ * \brief User board initialization template
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include <board.h>
+#include <conf_board.h>
+
+#if defined(__GNUC__)
+void board_init(void) WEAK __attribute__((alias("system_board_init")));
+#elif defined(__ICCARM__)
+void board_init(void);
+#  pragma weak board_init=system_board_init
+#endif
+
+void system_board_init(void)
+{
+	/* This function is meant to contain board-specific initialization code
+	 * for, e.g., the I/O pins. The initialization can rely on application-
+	 * specific board configuration, found in conf_board.h.
+	 */
+}
\ No newline at end of file
diff --git a/common2/boards/user_board/user_board.h b/common2/boards/user_board/user_board.h
new file mode 100644
index 00000000..9096e325
--- /dev/null
+++ b/common2/boards/user_board/user_board.h
@@ -0,0 +1,44 @@
+/**
+ * \file
+ *
+ * \brief User board definition template
+ *
+ */
+
+ /* This file is intended to contain definitions and configuration details for
+ * features and devices that are available on the board, e.g., frequency and
+ * startup time for an external crystal, external memory devices, LED and USART
+ * pins.
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef USER_BOARD_H
+#define USER_BOARD_H
+
+#include <conf_board.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup group_common_boards
+ * \defgroup user_board_group User board
+ *
+ * @{
+ */
+
+void system_board_init(void);
+
+/** Name string macro */
+#define BOARD_NAME                "USER_BOARD"
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // USER_BOARD_H
diff --git a/common2/components/display/c42412a/c42412a.c b/common2/components/display/c42412a/c42412a.c
new file mode 100644
index 00000000..9a5bf213
--- /dev/null
+++ b/common2/components/display/c42412a/c42412a.c
@@ -0,0 +1,292 @@
+/**
+ * \file
+ *
+ * \brief Management of C42412A LCD Glass component.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "slcd.h"
+#include "c42412a.h"
+#include "config_c42412a.h"
+#include <string.h>
+
+const uint32_t charactor_map[] = {
+	0x2e74,0x440,0x23c4,0x25c4,0x5e0,0x25a4,0x27a4,0x444,0x27e4,0x25e4,	/*0-9*/
+	0x7e4,0xa545,0x2224,0xa445,0x23a4,0x3a4,0x2724,	/*A-G*/
+	0x7e0,0xa005,0x2640,0x12b0,0x2220,0x678,0x1668,	/*H-N*/
+	0x2664,0x3e4,0x3664,0x13e4,0x25a4,0x8005,	/*O-T*/
+	0x2660,0xa30,0x1e60,0x1818,0x8018,0x2814	/*U-Z*/
+};
+const uint32_t num_map[10] = {0x2e74,0x440,0x23c4,0x25c4,0x5e0,0x25a4,0x27a4,0x444,0x27e4,0x25e4};
+
+void c42412a_init(void)
+{
+	struct slcd_config config;
+
+	slcd_get_config_defaults(&config);
+	slcd_init(&config);
+
+	slcd_set_frame_counter(SLCD_FRAME_COUNTER_0,false,CONF_C42412A_FC0);
+	slcd_set_frame_counter(SLCD_FRAME_COUNTER_1,false,CONF_C42412A_FC1);
+	slcd_set_frame_counter(SLCD_FRAME_COUNTER_2,false,CONF_C42412A_FC2);
+	slcd_set_contrast(CONF_C42412A_CONTRAST);
+	slcd_enable();
+}
+
+void c42412a_show_all(void)
+{
+	slcd_set_display_memory();
+}
+
+void c42412a_clear_all(void)
+{
+	slcd_disable_blink();
+	slcd_disable_circular_shift();
+	slcd_clear_display_memory();
+}
+
+void c42412a_show_text(const uint8_t *data)
+{
+	Assert(data);
+	uint32_t len = (uint32_t)strlen((char *) data);
+
+	len = (len > C42412A_MAX_CHAR) ? C42412A_MAX_CHAR : len;
+
+	slcd_character_map_set(SLCD_AUTOMATED_CHAR_START_FROM_BOTTOM_RIGHT,C42412A_CHAR_MAP_NUM_SEG-1);
+	for(uint32_t i = 0 ; i < len ; i++) {
+		if(data[i] >= '0' && data[i] <= '9') {
+			slcd_character_write_data(0,C42412A_NUM_SEG_INDEX_S+i*C42412A_CHAR_MAP_NUM_SEG,
+				charactor_map[data[i] - '0'],C42412A_DATA_MASK);
+		} else if(data[i] >= 'A' && data[i] <= 'Z') {
+			slcd_character_write_data(0,C42412A_NUM_SEG_INDEX_S+i*C42412A_CHAR_MAP_NUM_SEG,
+				charactor_map[data[i] - 'A' +10],C42412A_DATA_MASK);
+		} else if(data[i] >= 'a' && data[i] <= 'z') {
+			slcd_character_write_data(0,C42412A_NUM_SEG_INDEX_S+i*C42412A_CHAR_MAP_NUM_SEG,
+				charactor_map[data[i] - 'a' +10],C42412A_DATA_MASK);
+		} else {
+			slcd_character_write_data(0,C42412A_NUM_SEG_INDEX_S+i*C42412A_CHAR_MAP_NUM_SEG,
+				charactor_map[0],C42412A_DATA_MASK);
+		}
+
+	}
+
+}
+void c42412a_clear_text(void)
+{
+	slcd_character_map_set(SLCD_AUTOMATED_CHAR_START_FROM_BOTTOM_RIGHT,C42412A_CHAR_MAP_NUM_SEG-1);
+	for(uint32_t i = 0 ; i < C42412A_MAX_CHAR ; i++) {
+	  slcd_character_write_data(0,C42412A_NUM_SEG_INDEX_S+i*C42412A_CHAR_MAP_NUM_SEG,0,C42412A_DATA_MASK);
+	}
+}
+
+void c42412a_show_icon(uint8_t icon_com, uint8_t icon_seg)
+{
+	slcd_set_pixel(icon_com, icon_seg);
+}
+
+void c42412a_clear_icon(uint8_t icon_com, uint8_t icon_seg)
+{
+	slcd_clear_pixel(icon_com, icon_seg);
+}
+
+void c42412a_blink_icon_start(uint8_t icon_com, uint8_t icon_seg)
+{
+	if (icon_seg < 2) {
+		slcd_disable();
+		struct slcd_blink_config blink_config;
+		slcd_blink_get_config_defaults(&blink_config);
+		blink_config.blink_all_seg = false;
+		blink_config.fc = CONF_C42412A_BLINK_TIMER;
+		slcd_blink_set_config(&blink_config);
+		slcd_set_pixel(icon_com, icon_seg);
+		slcd_set_blink_pixel(icon_com, icon_seg);
+		slcd_enable_frame_counter(CONF_C42412A_BLINK_TIMER);
+		slcd_enable_blink();
+		slcd_enable();
+	}
+
+}
+
+void c42412a_blink_icon_stop(uint8_t icon_com, uint8_t icon_seg)
+{
+	if (icon_seg < 2) {
+		slcd_disable_blink();
+		slcd_disable();
+		slcd_clear_blink_pixel(icon_com, icon_seg);
+		slcd_enable_blink();
+		slcd_enable();
+	}
+}
+
+void c42412a_blink_screen(void)
+{
+	slcd_disable_blink();
+	slcd_disable();
+	struct slcd_blink_config blink_config;
+	slcd_blink_get_config_defaults(&blink_config);
+	blink_config.blink_all_seg = true;
+	blink_config.fc = CONF_C42412A_BLINK_TIMER;
+	slcd_blink_set_config(&blink_config);
+
+	slcd_enable_frame_counter(CONF_C42412A_BLINK_TIMER);
+	slcd_enable_blink();
+	slcd_enable();
+}
+
+void c42412a_blink_disable(void)
+{
+	slcd_disable_frame_counter(CONF_C42412A_BLINK_TIMER);
+	slcd_disable_blink();
+}
+
+void c42412a_set_contrast(uint8_t contrast)
+{
+	slcd_set_contrast(contrast);
+}
+
+void c42412a_show_battery(enum c42412a_battery_value val)
+{
+	if (val <= C42412A_BATTERY_THREE )
+	{
+		slcd_clear_pixel(C42412A_ICON_BAT_LEVEL_1);
+		slcd_clear_pixel(C42412A_ICON_BAT_LEVEL_2);
+		slcd_clear_pixel(C42412A_ICON_BAT_LEVEL_3);
+		slcd_set_pixel(C42412A_ICON_BAT);
+		switch (val) {
+			case C42412A_BATTERY_THREE:
+				slcd_set_pixel(C42412A_ICON_BAT_LEVEL_3);
+			case C42412A_BATTERY_TWO:
+				slcd_set_pixel(C42412A_ICON_BAT_LEVEL_2);
+			case C42412A_BATTERY_ONE:
+				slcd_set_pixel(C42412A_ICON_BAT_LEVEL_1);
+				break;
+			case C42412A_BATTERY_NONE:
+				break;
+		}
+	}
+}
+
+void c42412a_show_wireless(enum c42412a_wireless_value val)
+{
+	slcd_clear_pixel(C42412A_ICON_WLESS_LEVEL_1);
+	slcd_clear_pixel(C42412A_ICON_WLESS_LEVEL_2);
+	slcd_clear_pixel(C42412A_ICON_WLESS_LEVEL_3);
+	slcd_set_pixel(C42412A_ICON_WLESS_LEVEL_0);
+	switch (val) {
+		case C42412A_WIRELESS_THREE:
+			slcd_set_pixel(C42412A_ICON_WLESS_LEVEL_3);
+		case C42412A_WIRELESS_TWO:
+			slcd_set_pixel(C42412A_ICON_WLESS_LEVEL_2);
+		case C42412A_WIRELESS_ONE:
+			slcd_set_pixel(C42412A_ICON_WLESS_LEVEL_1);
+			break;
+		case C42412A_WIRELESS_NONE:
+			break;
+	}
+}
+
+void c42412a_show_numeric_dec(int32_t value)
+{
+	uint32_t tmp=0;
+	uint8_t i=0;
+	Assert(value > -200000);
+	Assert(value < 200000);
+
+	slcd_character_map_set(SLCD_AUTOMATED_CHAR_START_FROM_BOTTOM_RIGHT,C42412A_CHAR_MAP_NUM_SEG-1);
+
+	if(value < 0) {
+		slcd_set_pixel(C42412A_ICON_MINUS);
+	} else {
+		slcd_clear_pixel(C42412A_ICON_MINUS);
+	}
+
+	tmp = Abs(value);
+
+	if (tmp > 99999) {
+		slcd_set_pixel(C42412A_ICON_MINUS_SEG1);
+		slcd_set_pixel(C42412A_ICON_MINUS_SEG2);
+		tmp -= 100000;
+	} else {
+		slcd_clear_pixel(C42412A_ICON_MINUS_SEG1);
+		slcd_clear_pixel(C42412A_ICON_MINUS_SEG2);
+	}
+
+	while(tmp != 0 && i <= C42412A_MAX_NUM){
+		slcd_character_write_data(0,C42412A_NUM_SEG_INDEX_E - i*C42412A_CHAR_MAP_NUM_SEG,
+								num_map[tmp%10],C42412A_DATA_MASK);
+		tmp /=10;
+		i++;
+	}
+}
+
+void c42412a_clear_numeric_dec(void)
+{
+	slcd_clear_pixel(C42412A_ICON_MINUS);
+	slcd_clear_pixel(C42412A_ICON_MINUS_SEG1);
+	slcd_clear_pixel(C42412A_ICON_MINUS_SEG2);
+	slcd_character_map_set(SLCD_AUTOMATED_CHAR_START_FROM_BOTTOM_RIGHT,C42412A_CHAR_MAP_NUM_SEG-1);
+	for(uint32_t i = 0 ; i < C42412A_MAX_CHAR ; i++) {
+	  slcd_character_write_data(0,C42412A_NUM_SEG_INDEX_S+i*C42412A_CHAR_MAP_NUM_SEG,0,C42412A_DATA_MASK);
+	}
+}
+
+void c42412a_circular_animation_start(uint8_t size, uint8_t data)
+{
+	struct slcd_circular_shift_config cfg;
+	slcd_disable();
+	slcd_circular_shift_get_config_defaults(&cfg);
+	cfg.data = data;
+	cfg.size = size;
+	cfg.dir = C42412A_CSR_DIR;
+	cfg.fc = CONF_C42412A_CIRCULAR_ANIMATION_TIMER;
+	slcd_circular_shift_set_config(&cfg);
+	slcd_enable_circular_shift();
+	slcd_enable_frame_counter(CONF_C42412A_CIRCULAR_ANIMATION_TIMER);
+	slcd_enable();
+}
+
+void c42412a_circular_animation_stop(void)
+{
+	slcd_disable_frame_counter(CONF_C42412A_CIRCULAR_ANIMATION_TIMER);
+	slcd_disable_circular_shift();
+}
+
diff --git a/common2/components/display/c42412a/c42412a.h b/common2/components/display/c42412a/c42412a.h
new file mode 100644
index 00000000..efe95e29
--- /dev/null
+++ b/common2/components/display/c42412a/c42412a.h
@@ -0,0 +1,296 @@
+/**
+ * \file
+ *
+ * \brief Management of C42412A LCD Glass component.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef C42412A_H_INCLUDED
+#define C42412A_H_INCLUDED
+
+#include "compiler.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup c42412a_display_group Atmel YMCC42412AAAFDCL LCD Glass component
+ *
+ * This is a driver for Atmel YMCC42412AAAFDCL LCD component.
+ * This component is the custom LCD used for SAM4L-Xplained-Pro.
+ * This driver provides functions for initialization and control of the
+ * LCD segments.
+ *
+ * \section dependencies Dependencies
+ * This driver depends on the following modules:
+ * - SLCD driver.
+ * @{
+ */
+
+/**
+ * \name Value for battery Icon setting
+ * @{
+ */
+enum c42412a_battery_value {
+	C42412A_BATTERY_NONE = 0,
+	C42412A_BATTERY_ONE,
+	C42412A_BATTERY_TWO,
+	C42412A_BATTERY_THREE,
+};
+/** @} */
+
+/**
+ * \name Value for wireless Icon setting
+ * @{
+ */
+enum c42412a_wireless_value {
+	C42412A_WIRELESS_NONE = 0,
+	C42412A_WIRELESS_ONE,
+	C42412A_WIRELESS_TWO,
+	C42412A_WIRELESS_THREE,
+};
+/** @} */
+
+/**
+ * \name Function Prototypes
+ * @{
+ */
+
+/**
+ * \brief Initialize the C42412A LCD Glass component.
+ *
+ * This function initializes the LCD driver to control the LCD glass.
+ * It perform LCD module intialization according to the C42412A characteristics.
+ *
+ */
+void c42412a_init(void);
+
+/**
+ * \brief Show text on C42412A LCD glass alphanumeric field.
+ *
+ * This function will show text on the alphanumeric field of the LCD glass.
+ *
+ * \param data Pointer to the input string(max length is 5)
+ */
+void c42412a_show_text(const uint8_t *data);
+
+/**
+ * \brief Clear C42412A LCD glass alphanumeric field.
+ *
+ * This function will clear the alphanumeric field of the LCD glass.
+ */
+void c42412a_clear_text(void);
+
+/**
+ * \brief Clear a specific icon on the LCD glass.
+ *
+ * This function will clear a specific icon.
+ *
+ * \param icon_com  Pixel coordinate - COMx - of the icon.
+ * \param icon_seg  Pixel coordinate - SEGy - of the icon.
+ *
+ * \note Use the icon define in header file.
+ */
+void c42412a_clear_icon(uint8_t icon_com, uint8_t icon_seg);
+
+/**
+ * \brief Show a specific icon on the LCD glass.
+ *
+ * This function will show a specific icon.
+ *
+ * \param icon_com  Pixel coordinate - COMx - of the icon.
+ * \param icon_seg  Pixel coordinate - SEGy - of the icon.
+ *
+ * \note Use the icon define in header file.
+ */
+void c42412a_show_icon(uint8_t icon_com, uint8_t icon_seg);
+
+/**
+ * \brief Blink a specific icon on the LCD glass.
+ *
+ * This function will blink a specific icon.
+ *
+ * \param icon_com  Pixel coordinate - COMx - of the icon.
+ * \param icon_seg  Pixel coordinate - SEGy - of the icon.
+ *
+ * \note Use the icon define in header file(with selected segments
+ * blinking feature).
+ */
+void c42412a_blink_icon_start(uint8_t icon_com, uint8_t icon_seg);
+
+/**
+ * \brief Stop blink a specific icon on the LCD glass.
+ *
+ * This function will stop blink a specific icon.
+ *
+ * \param icon_com  Pixel coordinate - COMx - of the icon.
+ * \param icon_seg  Pixel coordinate - SEGy - of the icon.
+ *
+ * \note Use the icon define in header file(with selected segments
+ * blinking feature).
+ */
+void c42412a_blink_icon_stop(uint8_t icon_com, uint8_t icon_seg);
+
+/**
+ * \brief Blink the current screen content.
+ *
+ * This function will make the current screen blink.
+ *
+ */
+void c42412a_blink_screen(void);
+
+/**
+ * \brief Disable all Blink.
+ *
+ * This function will disable all Blink content.
+ *
+ */
+void c42412a_blink_disable(void);
+
+/**
+ * \brief Set the C42412A LCD glass contrast.
+ *
+ *  This function allows to adjust the contrast of the C42412A LCD glass.
+ *
+ *  \param contrast  Contrast vlaue [0-0xff].
+ */
+void c42412a_set_contrast(uint8_t contrast);
+
+/**
+ * \brief Scrolling start.
+ *
+ * This function start the text scrolling.
+ *
+ * \param data Data string buffer.
+ * \param length Data string length.
+ */
+void c42412a_text_scrolling_start(const uint8_t *data, uint32_t length);
+
+/**
+ * \brief Scrolling stop.
+ *
+ * This function stop the text scrolling.
+ */
+void c42412a_text_scrolling_stop(void);
+
+/**
+ * \brief Show all content of the LCD glass.
+ *
+ * This function sets all pixels and areas of the LCD glass C42412A.
+ *
+ */
+void c42412a_show_all(void);
+
+/**
+ * \brief Clear all content of the LCD glass.
+ *
+ * This function clears all pixels and areas of the LCD glass C42412A.
+ *
+ */
+void c42412a_clear_all(void);
+
+/**
+ * \brief Show a decimal numeric value to LCD glass.
+ *
+ * This function displays an int32 value to the LCD numeric field of the glass.
+ *
+ * \param value The int32_t value to be displayed
+ *
+ * \note The value range is [-199999,199999].
+ */
+void c42412a_show_numeric_dec(int32_t value);
+
+/**
+ * \brief Clear C42412A LCD glass numeric field and the three
+ * C42412A_ICON_MINUS*** icons.
+ *
+ * This function will clear the numeric field of the LCD glass.
+ */
+void c42412a_clear_numeric_dec(void);
+
+/**
+ * \brief Show battery condition by the battery icons on the LCD glass.
+ *
+ * This function allows to Show battery condition by the battery icons
+ * on the LCD glass..
+ *
+ * \param val The 0 to 3 value which show the battery condition.
+ */
+void c42412a_show_battery(enum c42412a_battery_value val);
+
+/**
+ * \brief Show wireless signal condition by the wireless icons on the LCD glass.
+ *
+ * This function allows to Show wireless signal condition by the wireless icons
+ * on the LCD glass..
+ *
+ * \param val The 0 to 3 value which show the wireless signal condition.
+ */
+ void c42412a_show_wireless(enum c42412a_wireless_value val);
+
+/**
+ * \brief Start autonomous segment animation.
+ *
+ * \param val The 0 to 3 value which show the wireless signal condition.
+ *
+ * \param size Shift data size.
+ * \param data Shift data.
+ */
+
+void c42412a_circular_animation_start(uint8_t size, uint8_t data);
+
+/**
+ * \brief Stop autonomous segment animation.
+ *
+ */
+void c42412a_circular_animation_stop(void);
+
+/** @} */
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* C42412A_H_INCLUDED */
diff --git a/common2/components/display/c42412a/doxygen/common2.components.display.c42412a/doxyfile.doxygen b/common2/components/display/c42412a/doxygen/common2.components.display.c42412a/doxyfile.doxygen
new file mode 100644
index 00000000..e912a1b5
--- /dev/null
+++ b/common2/components/display/c42412a/doxygen/common2.components.display.c42412a/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Segment LCD"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../c42412a.c ../../c42412a.h ../../module_config/config_c42412a.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/c42412a/doxygen/common2.components.display.c42412a/doxygen_module_mainpage.h b/common2/components/display/c42412a/doxygen/common2.components.display.c42412a/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/components/display/c42412a/doxygen/common2.components.display.c42412a/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/components/display/c42412a/example/c42412a_example.c b/common2/components/display/c42412a/example/c42412a_example.c
new file mode 100644
index 00000000..374b043a
--- /dev/null
+++ b/common2/components/display/c42412a/example/c42412a_example.c
@@ -0,0 +1,193 @@
+/**
+ * \file
+ *
+ * \brief C42412A LCD Glass component example for SAM.
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \mainpage
+ * \section intro Introduction
+ * This is the documentation for the data structures, functions, variables,
+ * defines, enums, and typedefs for the C42412A LCD Glass component example.
+ * It also comes bundled with an application-example of usage.
+ *
+ * This example demonstrates how to use the C42412A LCD Glass driver.
+ *
+ * The supported board list:
+ *    - SAM L22 Xplained Pro
+ *
+ * \section compilinfo Compilation Information
+ * This software is written for GNU GCC and IAR Embedded Workbench
+ * for Atmel. Other compilers may or may not work.
+ *
+ * \section deviceinfo Device Information
+ * The SEGMENT LCD1 Xplained Pro extension board must be connected to SAM devices.
+ *
+ * \section configinfo Configuration Information
+ * - PC terminal settings:
+ *   - 115200 bps,
+ *   - 8 data bits,
+ *   - no parity bit,
+ *   - 1 stop bit,
+ *   - no flow control.
+ *
+ * \section contactinfo Contact Information
+ * For further information, visit
+ * <A href="http://www.atmel.com">Atmel</A>.\n
+ * Support and FAQ: http://www.atmel.com/design-support/
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include <string.h>
+#include "config_c42412a.h"
+struct usart_module usart_instance;
+
+/**
+ *  Configure serial console.
+ */
+static void configure_console(void)
+{
+	struct usart_config config_usart;
+	usart_get_config_defaults(&config_usart);
+	config_usart.baudrate = 38400;
+	config_usart.mux_setting = EDBG_CDC_SERCOM_MUX_SETTING;
+	config_usart.pinmux_pad0 = EDBG_CDC_SERCOM_PINMUX_PAD0;
+	config_usart.pinmux_pad1 = EDBG_CDC_SERCOM_PINMUX_PAD1;
+	config_usart.pinmux_pad2 = EDBG_CDC_SERCOM_PINMUX_PAD2;
+	config_usart.pinmux_pad3 = EDBG_CDC_SERCOM_PINMUX_PAD3;
+	stdio_serial_init(&usart_instance, EDBG_CDC_MODULE, &config_usart);
+	usart_enable(&usart_instance);
+}
+
+static void c42412a_icon_test(void)
+{
+	c42412a_show_icon(C42412A_ICON_COLON);
+	delay_s(1);
+	c42412a_show_battery(C42412A_BATTERY_THREE);
+	delay_s(1);
+	c42412a_show_battery(C42412A_BATTERY_ONE);
+	delay_s(1);
+	c42412a_show_wireless(C42412A_WIRELESS_THREE);
+	delay_s(1);
+	c42412a_show_wireless(C42412A_WIRELESS_TWO);
+	delay_s(1);
+	c42412a_show_icon(C42412A_ICON_AUDIO_PLAY);
+	delay_s(1);
+	c42412a_clear_icon(C42412A_ICON_COLON);
+}
+static void c42412a_blink_test(void)
+{
+	c42412a_blink_icon_start(C42412A_ICON_USB);
+	c42412a_blink_icon_start(C42412A_ICON_ATMEL);
+	delay_s(1);
+	c42412a_blink_icon_stop(C42412A_ICON_USB);
+}
+static void c42412a_text_test(void)
+{
+	c42412a_clear_text();
+	c42412a_show_text((const uint8_t *)"Hi");
+	delay_s(1);
+	c42412a_clear_text();
+	c42412a_show_text((const uint8_t *)"Hello");
+	delay_s(1);
+	c42412a_clear_text();
+	c42412a_show_text((const uint8_t *)"Atmel");
+}
+
+static void c42412a_num_dec_test(void)
+{
+	c42412a_clear_numeric_dec();
+	c42412a_show_numeric_dec(12);
+	delay_s(1);
+	c42412a_clear_numeric_dec();
+	c42412a_show_numeric_dec(345);
+	delay_s(1);
+	c42412a_clear_numeric_dec();
+	c42412a_show_numeric_dec(6789);
+	delay_s(1);
+	c42412a_clear_numeric_dec();
+	c42412a_show_numeric_dec(-98765);
+	delay_s(1);
+	c42412a_clear_numeric_dec();
+	c42412a_show_numeric_dec(-198765);
+}
+
+static void c42412a_animation_test(void)
+{
+	c42412a_circular_animation_start(8,0x0f);
+}
+
+/**
+ * \brief main function : do init and loop
+ */
+int main(void)
+{
+	system_init();
+	configure_console();
+	delay_init();
+
+	/* Turn on the backlight. */
+	port_pin_set_output_level(SLCD_BACLKLIGHT,true);
+
+	printf("Start SLCD test\r\n");
+	/* Initialize the C42412A LCD glass component. */
+	c42412a_init();
+
+	c42412a_show_all();
+	c42412a_set_contrast(0x8);
+	delay_s(1);
+	c42412a_clear_all();
+
+	c42412a_icon_test();
+	delay_s(1);
+	c42412a_blink_test();
+	delay_s(1);
+	c42412a_text_test();
+	delay_s(1);
+	c42412a_num_dec_test();
+	delay_s(1);
+	c42412a_animation_test();
+	while (1) {
+	}
+}
+
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_board.h b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_clocks.h b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_slcd.h b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_slcd.h
new file mode 100644
index 00000000..c85a1770
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/conf_slcd.h
@@ -0,0 +1,141 @@
+/**
+ * \file
+ *
+ * \brief SAM SLCD Driver Configuration Header
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLCD_H_INCLUDED
+#define CONF_SLCD_H_INCLUDED
+
+/** Select SLCD clock. Use 32.768KHz OSCULP32K or XOSC32K for SLCD clock.
+ *  0 : From OSCULP32K
+ *  1 : From XOSC32K
+ */
+#define CONF_SLCD_CLOCK_SOURCE    0
+
+/** SLCD Duty Setting
+ *  0:Static duty
+ *  1:1/2 duty
+ *  2:1/3 duty
+ *  3:1/4 duty
+*/
+#define CONF_SLCD_DUTY         3
+
+/**
+ * SLCD Bias Setting.
+ *  0:Static bias
+ *  1:1/2 bias
+ *  2:1/3 bias
+ *  3:1/4 bias
+ */
+#define CONF_SLCD_BIAS         2
+
+/**
+ * SLCD Frame Frequency.
+ * The optimal frame frequency should be in range from 30Hz up to 100Hz
+ * to avoid flickering and ghosting effect.
+ * To get the frame frequency, CLK_SLCD_OSC is first divided by a prescaler
+ * from 16 to 128 then divided by 1 up to 8 as following.
+ * 
+ * FrameRate = CLK_SLCD_OSC / (PVAL*(CKDIV+1)(DUTY+1))
+ *
+ * SLCD Prescaler Value (PVAL).
+ * 0 : 16 prescaler
+ * 1 : 32 prescaler
+ * 2 : 64 prescaler
+ * 3 : 128 prescaler
+ *
+ * SLCD Clock divider (CKDIV)
+ * 0 : CKDIV is 0
+ * 1 : CKDIV is 1
+ * 2 : CKDIV is 2
+ * 3 : CKDIV is 3
+ * 4 : CKDIV is 4
+ * 5 : CKDIV is 5
+ * 6 : CKDIV is 6
+ * 7 : CKDIV is 7
+ */
+#define CONF_SLCD_PVAL         0
+#define CONF_SLCD_CKDIV        7
+
+/** Internal/External VLCD selection.
+* 0 : Internal VLCD generation
+* 1 : External VLCD generation
+*/
+#define CONF_SLCD_VLCD_SEL        0
+
+/** Reference refresh frequency. 
+*  0: Bias Reference refresh frequency is 2KHz
+*  1: Bias Reference refresh frequency is 1KHz
+*  2: Bias Reference refresh frequency is 500Hz
+*  3: Bias Reference refresh frequency is 250Hz
+*  4: Bias Reference refresh frequency is 125Hz
+*  5: Bias Reference refresh frequency is 62.5Hz
+*/
+#define CONF_SLCD_REF_REFRESH_FREQ        0
+
+/** Power fefresh frequency.
+*  0: Charge pump refresh frequency is 2KHz
+*  1: Charge pump refresh frequency is 1KHz
+*  2: Charge pump refresh frequency is 500Hz
+*  3: Charge pump refresh frequency is 250Hz
+ */
+#define CONF_SLCD_POWER_REFRESH_FREQ       0
+ 
+/** LCD Working Power Mode.
+ * 0:LCD power automatically select regualation mode or pump mode.
+ * 1:LCD power use step-up pump loop only.
+ * 2:LCD power use step-down drop-out regulation loop only.
+ */ 
+#define CONF_SLCD_POWER_MODE       0
+
+/** COM/SEG PIN Selection.
+ * There are 52 LCD pins, but SLCD can drive up to 48 LCD pins which can be
+ * individually enabled or disabled according to the LCD glass. The number of LCD pins
+ * enabled should not be higher than the maximum of COM and SEG lines supported.
+ * COM and SEG lines are always assigned in ascending order.
+ * CONF_SLCD_PIN_L_MASK is pin mask [31,0]
+ * CONF_SLCD_PIN_H_MASK is pin mask [51,32]
+ */ 
+#define CONF_SLCD_PIN_L_MASK       0xCFFFC3C0
+#define CONF_SLCD_PIN_H_MASK       0x00000FF0
+#endif
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/config_c42412a.h b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/config_c42412a.h
new file mode 100644
index 00000000..1cb3e99e
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/config_c42412a.h
@@ -0,0 +1,135 @@
+/**
+ * \file
+ *
+ * \brief C42412A configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/** Configuration of the C42412A LCD glass driver */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_C42412A_H_INCLUDED
+#define CONF_C42412A_H_INCLUDED
+#include "slcd.h"
+/**
+ * \name Circular Animation Shift Direction
+ * @{
+ */
+#define C42412A_CSR_DIR      SLCD_CIRCULAR_SHIFT_RIGHT
+/** @} */
+
+
+/** Init contrast configuration, it's wthin [0-15]. */
+#define CONF_C42412A_CONTRAST  0xf
+
+
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C42412A_FC0+1).
+ */
+#define CONF_C42412A_FC0     2
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C42412A_FC0+1).
+ */
+#define CONF_C42412A_FC1     2
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C42412A_FC0+1).
+ */
+#define CONF_C42412A_FC2     1
+
+/** Blink timer configuration. */
+#define CONF_C42412A_BLINK_TIMER                 SLCD_FRAME_COUNTER_0
+
+/** Circular animation configuration. */
+#define CONF_C42412A_CIRCULAR_ANIMATION_TIMER    SLCD_FRAME_COUNTER_0
+
+
+#define C42412A_NB_OF_COM 4
+#define C42412A_NB_OF_SEG 24
+
+#define C42412A_NUM_SEG_INDEX_S 4
+#define C42412A_NUM_SEG_INDEX_E 20
+
+#define C42412A_CHAR_MAP_NUM_SEG 4
+#define C42412A_DATA_MASK 0xFF4002 
+      
+#define C42412A_HOUR_SEG_S   16 
+#define C42412A_MIN_SEG_S    18
+
+
+#define C42412A_MAX_CHAR 5
+#define C42412A_MAX_NUM  5
+
+/**
+ * \name LCD component C42364A segment map default definitions
+ * @{
+ */
+/* Icon with selected segments blinking feature */
+#define C42412A_ICON_USB            1, 1
+#define C42412A_ICON_COLON          3, 1
+#define C42412A_ICON_BAT            0, 0
+#define C42412A_ICON_ATMEL          0, 1
+/* Icon without selected segments blinking feature */
+#define C42412A_ICON_MINUS          0, 17
+#define C42412A_ICON_MINUS_SEG1     0, 13
+#define C42412A_ICON_MINUS_SEG2     0, 9
+#define C42412A_ICON_DOT_1          0, 5
+#define C42412A_ICON_DOT_2          3, 6
+#define C42412A_ICON_DOT_3          3, 10
+#define C42412A_ICON_DOT_4          3, 14
+#define C42412A_ICON_DOT_5          3, 18
+#define C42412A_ICON_BAT_LEVEL_1    2, 0
+#define C42412A_ICON_BAT_LEVEL_2    3, 0
+#define C42412A_ICON_BAT_LEVEL_3    1, 0
+#define C42412A_ICON_WLESS_LEVEL_0  3, 3
+#define C42412A_ICON_WLESS_LEVEL_1  3, 2
+#define C42412A_ICON_WLESS_LEVEL_2  2, 3
+#define C42412A_ICON_WLESS_LEVEL_3  2, 2
+#define C42412A_ICON_AUDIO_PLAY     2, 1
+#define C42412A_ICON_AM             0, 2
+#define C42412A_ICON_PM             0, 3
+#define C42412A_ICON_DEGREE_C       3, 22
+#define C42412A_ICON_DEGREE_F       0, 21
+#define C42412A_ICON_VOLT           1, 2
+#define C42412A_ICON_MILLI_VOLT     1, 3
+
+/* @} */
+
+#endif /* CONF_C42412A_H_INCLUDED */
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..d181390e
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "C42412a LCD Glass Example for SAML22"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../c42412a_example.c ../../../c42412a.c ../../../../../../../sam0/drivers/slcd/slcd.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_slcd.h ../config_c42412a.h ../../../c42412a.h ../../../../../../../sam0/drivers/slcd/slcd.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/slcd ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/port ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=false SYSTICK_MODE BOARD=SAML22_XPLAINED_PRO __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/Makefile b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/asf.h b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..c29260e0
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/asf.h
@@ -0,0 +1,111 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Polled API

+#include <sercom.h>

+

+// From module: SERCOM USART - Serial Communications (Polled APIs)

+#include <usart.h>

+

+// From module: SLCD - Segment Liquid Crystal Display Controller

+#include <slcd.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Segment LCD

+#include <c42412a.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/config.mk b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..0930f2e8
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc/config.mk
@@ -0,0 +1,170 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = c42412a_example_flash.elf
+TARGET_SRAM = c42412a_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/c42412a/c42412a.c       \
+       common2/components/display/c42412a/example/c42412a_example.c \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml22_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/slcd/slcd.c                           \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/display/c42412a                 \
+       common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/slcd                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D USART_CALLBACK_MODE=false                       \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/asf.h b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..c29260e0
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/asf.h
@@ -0,0 +1,111 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Polled API

+#include <sercom.h>

+

+// From module: SERCOM USART - Serial Communications (Polled APIs)

+#include <usart.h>

+

+// From module: SLCD - Segment Liquid Crystal Display Controller

+#include <slcd.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Segment LCD

+#include <c42412a.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example.eww b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example.eww
new file mode 100644
index 00000000..12efc5bf
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\c42412a_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example_flash.ewd b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example_flash.ewd
new file mode 100644
index 00000000..03c7016f
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example_flash.ewp b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example_flash.ewp
new file mode 100644
index 00000000..2e987a8a
--- /dev/null
+++ b/common2/components/display/c42412a/example/saml22n18a_saml22_xplained_pro/iar/c42412a_example_flash.ewp
@@ -0,0 +1,2562 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=false</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=false</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>c42412a_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>c42412a_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=false</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=false</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>c42412a_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>c42412a_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>slcd</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd/slcd.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd/slcd.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>c42412a</name>
+					<file>
+						<name>$PROJ_DIR$/../../../c42412a.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../c42412a_example.c</name>
+						</file>
+						<group>
+							<name>saml22n18a_saml22_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../config_c42412a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../c42412a.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/c42412a/module_config/config_c42412a.h b/common2/components/display/c42412a/module_config/config_c42412a.h
new file mode 100644
index 00000000..1cb3e99e
--- /dev/null
+++ b/common2/components/display/c42412a/module_config/config_c42412a.h
@@ -0,0 +1,135 @@
+/**
+ * \file
+ *
+ * \brief C42412A configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/** Configuration of the C42412A LCD glass driver */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_C42412A_H_INCLUDED
+#define CONF_C42412A_H_INCLUDED
+#include "slcd.h"
+/**
+ * \name Circular Animation Shift Direction
+ * @{
+ */
+#define C42412A_CSR_DIR      SLCD_CIRCULAR_SHIFT_RIGHT
+/** @} */
+
+
+/** Init contrast configuration, it's wthin [0-15]. */
+#define CONF_C42412A_CONTRAST  0xf
+
+
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C42412A_FC0+1).
+ */
+#define CONF_C42412A_FC0     2
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C42412A_FC0+1).
+ */
+#define CONF_C42412A_FC1     2
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C42412A_FC0+1).
+ */
+#define CONF_C42412A_FC2     1
+
+/** Blink timer configuration. */
+#define CONF_C42412A_BLINK_TIMER                 SLCD_FRAME_COUNTER_0
+
+/** Circular animation configuration. */
+#define CONF_C42412A_CIRCULAR_ANIMATION_TIMER    SLCD_FRAME_COUNTER_0
+
+
+#define C42412A_NB_OF_COM 4
+#define C42412A_NB_OF_SEG 24
+
+#define C42412A_NUM_SEG_INDEX_S 4
+#define C42412A_NUM_SEG_INDEX_E 20
+
+#define C42412A_CHAR_MAP_NUM_SEG 4
+#define C42412A_DATA_MASK 0xFF4002 
+      
+#define C42412A_HOUR_SEG_S   16 
+#define C42412A_MIN_SEG_S    18
+
+
+#define C42412A_MAX_CHAR 5
+#define C42412A_MAX_NUM  5
+
+/**
+ * \name LCD component C42364A segment map default definitions
+ * @{
+ */
+/* Icon with selected segments blinking feature */
+#define C42412A_ICON_USB            1, 1
+#define C42412A_ICON_COLON          3, 1
+#define C42412A_ICON_BAT            0, 0
+#define C42412A_ICON_ATMEL          0, 1
+/* Icon without selected segments blinking feature */
+#define C42412A_ICON_MINUS          0, 17
+#define C42412A_ICON_MINUS_SEG1     0, 13
+#define C42412A_ICON_MINUS_SEG2     0, 9
+#define C42412A_ICON_DOT_1          0, 5
+#define C42412A_ICON_DOT_2          3, 6
+#define C42412A_ICON_DOT_3          3, 10
+#define C42412A_ICON_DOT_4          3, 14
+#define C42412A_ICON_DOT_5          3, 18
+#define C42412A_ICON_BAT_LEVEL_1    2, 0
+#define C42412A_ICON_BAT_LEVEL_2    3, 0
+#define C42412A_ICON_BAT_LEVEL_3    1, 0
+#define C42412A_ICON_WLESS_LEVEL_0  3, 3
+#define C42412A_ICON_WLESS_LEVEL_1  3, 2
+#define C42412A_ICON_WLESS_LEVEL_2  2, 3
+#define C42412A_ICON_WLESS_LEVEL_3  2, 2
+#define C42412A_ICON_AUDIO_PLAY     2, 1
+#define C42412A_ICON_AM             0, 2
+#define C42412A_ICON_PM             0, 3
+#define C42412A_ICON_DEGREE_C       3, 22
+#define C42412A_ICON_DEGREE_F       0, 21
+#define C42412A_ICON_VOLT           1, 2
+#define C42412A_ICON_MILLI_VOLT     1, 3
+
+/* @} */
+
+#endif /* CONF_C42412A_H_INCLUDED */
diff --git a/common2/components/display/c8263a/c8263a.c b/common2/components/display/c8263a/c8263a.c
new file mode 100644
index 00000000..16716d8e
--- /dev/null
+++ b/common2/components/display/c8263a/c8263a.c
@@ -0,0 +1,304 @@
+/**
+ * \file
+ *
+ * \brief Management of C8263A LCD Glass component.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "slcd.h"
+#include "c8263a.h"
+#include "config_c8263a.h"
+#include <string.h>
+
+const uint32_t charactor_map[] = {
+	0xE85C, 0x2008, 0xA314, 0xA30C, 0x6308, 0xC30C, 0xC31C, 0xA008, 0xE31C, 0xE30C, /* 0-9 */
+	0xE318, 0xA68C, 0xC014, 0xA48C, 0xC314, 0xC310, 0xC21C, /* A-G */
+	0x6318, 0x8484, 0x201C, 0x4930, 0x4014, 0x7818, 0x7038, /* H-N */
+	0xE01C, 0xE310, 0xE03C, 0xE330, 0xC30C, 0x8480, /* O-T */
+	0x601C, 0x4850, 0x6078, 0x1860, 0x1880, 0x8844  /* U-Z */
+};
+const uint32_t num_map[10] = {0x77, 0x24, 0x5d, 0x6d, 0x2e, 0x6b, 0x7b, 0x25, 0x7f, 0x6f };
+
+void c8263a_init(void)
+{
+	struct slcd_config config;
+
+	slcd_get_config_defaults(&config);
+	config.enable_bias_buffer = true;
+	slcd_init(&config);
+
+	slcd_set_frame_counter(SLCD_FRAME_COUNTER_0,false,CONF_C8263A_FC0);
+	slcd_set_frame_counter(SLCD_FRAME_COUNTER_1,false,CONF_C8263A_FC1);
+	slcd_set_frame_counter(SLCD_FRAME_COUNTER_2,false,CONF_C8263A_FC2);
+	slcd_set_contrast(CONF_C8263A_CONTRAST);
+	slcd_enable();
+}
+
+void c8263a_show_all(void)
+{
+	slcd_set_display_memory();
+}
+
+void c8263a_clear_all(void)
+{
+	slcd_disable_blink();
+	slcd_disable_circular_shift();
+	slcd_clear_display_memory();
+}
+
+void c8263a_show_text(const uint8_t *data)
+{
+	Assert(data);
+	uint32_t len = (uint32_t)strlen((char *) data);
+
+	len = (len > C8263A_MAX_CHAR) ? C8263A_MAX_CHAR : len;
+
+	slcd_character_map_set(SLCD_AUTOMATED_CHAR_START_FROM_BOTTOM_RIGHT,C8263A_CHAR_MAP_NUM_SEG-1);
+	for(uint32_t i = 0 ; i < len ; i++) {
+		if(data[i] >= '0' && data[i] <= '9') {
+			slcd_character_write_data(0,C8263A_CHAR_SEG_INDEX_S+i*C8263A_CHAR_MAP_NUM_SEG,
+				charactor_map[data[i] - '0'],C8263A_CHAR_MASK);
+		} else if(data[i] >= 'A' && data[i] <= 'Z') {
+			slcd_character_write_data(0,C8263A_CHAR_SEG_INDEX_S+i*C8263A_CHAR_MAP_NUM_SEG,
+				charactor_map[data[i] - 'A' +10],C8263A_CHAR_MASK);
+		} else if(data[i] >= 'a' && data[i] <= 'z') {
+			slcd_character_write_data(0,C8263A_CHAR_SEG_INDEX_S+i*C8263A_CHAR_MAP_NUM_SEG,
+				charactor_map[data[i] - 'a' +10],C8263A_CHAR_MASK);
+		} else {
+			slcd_character_write_data(0,C8263A_CHAR_SEG_INDEX_S+i*C8263A_CHAR_MAP_NUM_SEG,
+				charactor_map[0],C8263A_CHAR_MASK);
+		}
+
+	}
+
+}
+void c8263a_clear_text(void)
+{
+	slcd_character_map_set(SLCD_AUTOMATED_CHAR_START_FROM_BOTTOM_RIGHT,C8263A_CHAR_MAP_NUM_SEG-1);
+	for(uint32_t i = 0 ; i < C8263A_MAX_CHAR ; i++) {
+	  slcd_character_write_data(0,C8263A_CHAR_SEG_INDEX_S+i*C8263A_CHAR_MAP_NUM_SEG,0,C8263A_CHAR_MASK);
+	}
+}
+
+void c8263a_show_icon(uint8_t icon_com, uint8_t icon_seg)
+{
+	slcd_set_pixel(icon_com, icon_seg);
+}
+
+void c8263a_clear_icon(uint8_t icon_com, uint8_t icon_seg)
+{
+	slcd_clear_pixel(icon_com, icon_seg);
+}
+
+void c8263a_blink_icon_start(uint8_t icon_com, uint8_t icon_seg)
+{
+	if (icon_seg < 2) {
+		slcd_disable();
+		struct slcd_blink_config blink_config;
+		slcd_blink_get_config_defaults(&blink_config);
+		blink_config.blink_all_seg = false;
+		blink_config.fc = CONF_C8263A_BLINK_TIMER;
+		slcd_blink_set_config(&blink_config);
+		slcd_set_pixel(icon_com, icon_seg);
+		slcd_set_blink_pixel(icon_com, icon_seg);
+		slcd_enable_frame_counter(CONF_C8263A_BLINK_TIMER);
+		slcd_enable_blink();
+		slcd_enable();
+	}
+
+}
+
+void c8263a_blink_icon_stop(uint8_t icon_com, uint8_t icon_seg)
+{
+	if (icon_seg < 2) {
+		slcd_disable_blink();
+		slcd_disable();
+		slcd_clear_blink_pixel(icon_com, icon_seg);
+		slcd_enable_blink();
+		slcd_enable();
+	}
+}
+
+void c8263a_blink_screen(void)
+{
+	slcd_disable_blink();
+	slcd_disable();
+	struct slcd_blink_config blink_config;
+	slcd_blink_get_config_defaults(&blink_config);
+	blink_config.blink_all_seg = true;
+	blink_config.fc = CONF_C8263A_BLINK_TIMER;
+	slcd_blink_set_config(&blink_config);
+
+	slcd_enable_frame_counter(CONF_C8263A_BLINK_TIMER);
+	slcd_enable_blink();
+	slcd_enable();
+}
+
+void c8263a_blink_disable(void)
+{
+	slcd_disable_frame_counter(CONF_C8263A_BLINK_TIMER);
+	slcd_disable_blink();
+}
+
+void c8263a_set_contrast(uint8_t contrast)
+{
+	slcd_set_contrast(contrast);
+}
+
+void c8263a_show_battery(enum c8263a_battery_value val)
+{
+	if (val <= C8263A_BATTERY_THREE )
+	{
+		slcd_clear_pixel(C8263A_ICON_BAT_LEVEL_1);
+		slcd_clear_pixel(C8263A_ICON_BAT_LEVEL_2);
+		slcd_clear_pixel(C8263A_ICON_BAT_LEVEL_3);
+		slcd_set_pixel(C8263A_ICON_BAT);
+		switch (val) {
+			case C8263A_BATTERY_THREE:
+				slcd_set_pixel(C8263A_ICON_BAT_LEVEL_3);
+			case C8263A_BATTERY_TWO:
+				slcd_set_pixel(C8263A_ICON_BAT_LEVEL_2);
+			case C8263A_BATTERY_ONE:
+				slcd_set_pixel(C8263A_ICON_BAT_LEVEL_1);
+				break;
+			case C8263A_BATTERY_NONE:
+				break;
+		}
+	}
+}
+
+void c8263a_show_wireless(enum c8263a_wireless_value val)
+{
+	slcd_clear_pixel(C8263A_ICON_WLESS_LEVEL_1);
+	slcd_clear_pixel(C8263A_ICON_WLESS_LEVEL_2);
+	slcd_clear_pixel(C8263A_ICON_WLESS_LEVEL_3);
+	slcd_set_pixel(C8263A_ICON_WLESS_LEVEL_0);
+	switch (val) {
+		case C8263A_WIRELESS_THREE:
+			slcd_set_pixel(C8263A_ICON_WLESS_LEVEL_3);
+		case C8263A_WIRELESS_TWO:
+			slcd_set_pixel(C8263A_ICON_WLESS_LEVEL_2);
+		case C8263A_WIRELESS_ONE:
+			slcd_set_pixel(C8263A_ICON_WLESS_LEVEL_1);
+			break;
+		case C8263A_WIRELESS_NONE:
+			break;
+	}
+}
+
+void c8263a_show_numeric_dec(int32_t value)
+{
+	uint32_t tmp=0;
+	uint8_t i=0;
+	Assert(value > -200000);
+	Assert(value < 200000);
+
+	slcd_character_map_set(SLCD_AUTOMATED_CHAR_START_FROM_BOTTOM_RIGHT,C8263A_DIGITAL_MAP_NUM_SEG-1);
+
+	if(value < 0) {
+		slcd_set_pixel(C8263A_ICON_MINUS);
+	} else {
+		slcd_clear_pixel(C8263A_ICON_MINUS);
+	}
+
+	tmp = Abs(value);
+
+	if (tmp > 99999) {
+		slcd_set_pixel(C8263A_ICON_MINUS_SEG1);
+		slcd_set_pixel(C8263A_ICON_MINUS_SEG2);
+		tmp -= 100000;
+	} else {
+		slcd_clear_pixel(C8263A_ICON_MINUS_SEG1);
+		slcd_clear_pixel(C8263A_ICON_MINUS_SEG2);
+	}
+
+	while(tmp != 0 && i < C8263A_MAX_DIGITAL){
+		if (i == C8263A_MAX_DIGITAL - 1) {
+			slcd_character_write_data(0,C8263A_DIGITAL_SEG_INDEX_E - i*C8263A_DIGITAL_MAP_NUM_SEG - 2,
+					num_map[tmp%10],C8263A_DIGITAL_MASK);
+		} else {
+			slcd_character_write_data(0,C8263A_DIGITAL_SEG_INDEX_E - i*C8263A_DIGITAL_MAP_NUM_SEG,
+					num_map[tmp%10],C8263A_DIGITAL_MASK);
+		}
+		tmp /=10;
+		i++;
+	}
+}
+
+void c8263a_clear_numeric_dec(void)
+{
+	slcd_clear_pixel(C8263A_ICON_MINUS);
+	slcd_clear_pixel(C8263A_ICON_MINUS_SEG1);
+	slcd_clear_pixel(C8263A_ICON_MINUS_SEG2);
+	slcd_character_map_set(SLCD_AUTOMATED_CHAR_START_FROM_BOTTOM_RIGHT,C8263A_DIGITAL_MAP_NUM_SEG-1);
+	for(uint32_t i = 0 ; i < C8263A_MAX_DIGITAL ; i++) {
+		if (i == 0) {
+	  		slcd_character_write_data(0,C8263A_DIGITAL_SEG_INDEX_S + i*C8263A_DIGITAL_MAP_NUM_SEG,
+					0, C8263A_DIGITAL_MASK);
+		} else {
+			slcd_character_write_data(0,C8263A_DIGITAL_SEG_INDEX_S + i*C8263A_DIGITAL_MAP_NUM_SEG + 2,
+					0, C8263A_DIGITAL_MASK);
+		}
+	}
+}
+
+void c8263a_circular_animation_start(uint8_t size, uint8_t data)
+{
+	struct slcd_circular_shift_config cfg;
+	slcd_disable();
+	slcd_circular_shift_get_config_defaults(&cfg);
+	cfg.data = data;
+	cfg.size = size;
+	cfg.dir = C8263A_CSR_DIR;
+	cfg.fc = CONF_C8263A_CIRCULAR_ANIMATION_TIMER;
+	slcd_circular_shift_set_config(&cfg);
+	slcd_enable_circular_shift();
+	slcd_enable_frame_counter(CONF_C8263A_CIRCULAR_ANIMATION_TIMER);
+	slcd_enable();
+}
+
+void c8263a_circular_animation_stop(void)
+{
+	slcd_disable_frame_counter(CONF_C8263A_CIRCULAR_ANIMATION_TIMER);
+	slcd_disable_circular_shift();
+}
+
diff --git a/common2/components/display/c8263a/c8263a.h b/common2/components/display/c8263a/c8263a.h
new file mode 100644
index 00000000..def2cfae
--- /dev/null
+++ b/common2/components/display/c8263a/c8263a.h
@@ -0,0 +1,296 @@
+/**
+ * \file
+ *
+ * \brief Management of C8263A LCD Glass component.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef C8263A_H_INCLUDED
+#define C8263A_H_INCLUDED
+
+#include "compiler.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup c8263a_display_group Atmel YMCC8263AAAFDCL LCD Glass component
+ *
+ * This is a driver for Atmel YMCC8263AAAFDCL LCD component.
+ * This component is the custom LCD used for SAM4L-Xplained-Pro.
+ * This driver provides functions for initialization and control of the
+ * LCD segments.
+ *
+ * \section dependencies Dependencies
+ * This driver depends on the following modules:
+ * - SLCD driver.
+ * @{
+ */
+
+/**
+ * \name Value for battery Icon setting
+ * @{
+ */
+enum c8263a_battery_value {
+	C8263A_BATTERY_NONE = 0,
+	C8263A_BATTERY_ONE,
+	C8263A_BATTERY_TWO,
+	C8263A_BATTERY_THREE,
+};
+/** @} */
+
+/**
+ * \name Value for wireless Icon setting
+ * @{
+ */
+enum c8263a_wireless_value {
+	C8263A_WIRELESS_NONE = 0,
+	C8263A_WIRELESS_ONE,
+	C8263A_WIRELESS_TWO,
+	C8263A_WIRELESS_THREE,
+};
+/** @} */
+
+/**
+ * \name Function Prototypes
+ * @{
+ */
+
+/**
+ * \brief Initialize the C8263A LCD Glass component.
+ *
+ * This function initializes the LCD driver to control the LCD glass.
+ * It perform LCD module intialization according to the C8263A characteristics.
+ *
+ */
+void c8263a_init(void);
+
+/**
+ * \brief Show text on C8263A LCD glass alphanumeric field.
+ *
+ * This function will show text on the alphanumeric field of the LCD glass.
+ *
+ * \param data Pointer to the input string(max length is 8)
+ */
+void c8263a_show_text(const uint8_t *data);
+
+/**
+ * \brief Clear C8263A LCD glass alphanumeric field.
+ *
+ * This function will clear the alphanumeric field of the LCD glass.
+ */
+void c8263a_clear_text(void);
+
+/**
+ * \brief Clear a specific icon on the LCD glass.
+ *
+ * This function will clear a specific icon.
+ *
+ * \param icon_com  Pixel coordinate - COMx - of the icon.
+ * \param icon_seg  Pixel coordinate - SEGy - of the icon.
+ *
+ * \note Use the icon define in header file.
+ */
+void c8263a_clear_icon(uint8_t icon_com, uint8_t icon_seg);
+
+/**
+ * \brief Show a specific icon on the LCD glass.
+ *
+ * This function will show a specific icon.
+ *
+ * \param icon_com  Pixel coordinate - COMx - of the icon.
+ * \param icon_seg  Pixel coordinate - SEGy - of the icon.
+ *
+ * \note Use the icon define in header file.
+ */
+void c8263a_show_icon(uint8_t icon_com, uint8_t icon_seg);
+
+/**
+ * \brief Blink a specific icon on the LCD glass.
+ *
+ * This function will blink a specific icon.
+ *
+ * \param icon_com  Pixel coordinate - COMx - of the icon.
+ * \param icon_seg  Pixel coordinate - SEGy - of the icon.
+ *
+ * \note Use the icon define in header file(with selected segments
+ * blinking feature).
+ */
+void c8263a_blink_icon_start(uint8_t icon_com, uint8_t icon_seg);
+
+/**
+ * \brief Stop blink a specific icon on the LCD glass.
+ *
+ * This function will stop blink a specific icon.
+ *
+ * \param icon_com  Pixel coordinate - COMx - of the icon.
+ * \param icon_seg  Pixel coordinate - SEGy - of the icon.
+ *
+ * \note Use the icon define in header file(with selected segments
+ * blinking feature).
+ */
+void c8263a_blink_icon_stop(uint8_t icon_com, uint8_t icon_seg);
+
+/**
+ * \brief Blink the current screen content.
+ *
+ * This function will make the current screen blink.
+ *
+ */
+void c8263a_blink_screen(void);
+
+/**
+ * \brief Disable all Blink.
+ *
+ * This function will disable all Blink content.
+ *
+ */
+void c8263a_blink_disable(void);
+
+/**
+ * \brief Set the C8263A LCD glass contrast.
+ *
+ *  This function allows to adjust the contrast of the C8263A LCD glass.
+ *
+ *  \param contrast  Contrast vlaue [0-0xff].
+ */
+void c8263a_set_contrast(uint8_t contrast);
+
+/**
+ * \brief Scrolling start.
+ *
+ * This function start the text scrolling.
+ *
+ * \param data Data string buffer.
+ * \param length Data string length.
+ */
+void c8263a_text_scrolling_start(const uint8_t *data, uint32_t length);
+
+/**
+ * \brief Scrolling stop.
+ *
+ * This function stop the text scrolling.
+ */
+void c8263a_text_scrolling_stop(void);
+
+/**
+ * \brief Show all content of the LCD glass.
+ *
+ * This function sets all pixels and areas of the LCD glass C8263A.
+ *
+ */
+void c8263a_show_all(void);
+
+/**
+ * \brief Clear all content of the LCD glass.
+ *
+ * This function clears all pixels and areas of the LCD glass C8263A.
+ *
+ */
+void c8263a_clear_all(void);
+
+/**
+ * \brief Show a decimal numeric value to LCD glass.
+ *
+ * This function displays an int32 value to the LCD numeric field of the glass.
+ *
+ * \param value The int32_t value to be displayed
+ *
+ * \note The value range is [-199999,199999].
+ */
+void c8263a_show_numeric_dec(int32_t value);
+
+/**
+ * \brief Clear C8263A LCD glass numeric field and the three
+ * C8263A_ICON_MINUS*** icons.
+ *
+ * This function will clear the numeric field of the LCD glass.
+ */
+void c8263a_clear_numeric_dec(void);
+
+/**
+ * \brief Show battery condition by the battery icons on the LCD glass.
+ *
+ * This function allows to Show battery condition by the battery icons
+ * on the LCD glass..
+ *
+ * \param val The 0 to 3 value which show the battery condition.
+ */
+void c8263a_show_battery(enum c8263a_battery_value val);
+
+/**
+ * \brief Show wireless signal condition by the wireless icons on the LCD glass.
+ *
+ * This function allows to Show wireless signal condition by the wireless icons
+ * on the LCD glass..
+ *
+ * \param val The 0 to 3 value which show the wireless signal condition.
+ */
+ void c8263a_show_wireless(enum c8263a_wireless_value val);
+
+/**
+ * \brief Start autonomous segment animation.
+ *
+ * \param val The 0 to 3 value which show the wireless signal condition.
+ *
+ * \param size Shift data size.
+ * \param data Shift data.
+ */
+
+void c8263a_circular_animation_start(uint8_t size, uint8_t data);
+
+/**
+ * \brief Stop autonomous segment animation.
+ *
+ */
+void c8263a_circular_animation_stop(void);
+
+/** @} */
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* C8263A_H_INCLUDED */
diff --git a/common2/components/display/c8263a/doxygen/common2.components.display.c8263a/doxyfile.doxygen b/common2/components/display/c8263a/doxygen/common2.components.display.c8263a/doxyfile.doxygen
new file mode 100644
index 00000000..eb7c05c6
--- /dev/null
+++ b/common2/components/display/c8263a/doxygen/common2.components.display.c8263a/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Segment LCD"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../c8263a.c ../../c8263a.h ../../module_config/config_c8263a.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/c8263a/doxygen/common2.components.display.c8263a/doxygen_module_mainpage.h b/common2/components/display/c8263a/doxygen/common2.components.display.c8263a/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/components/display/c8263a/doxygen/common2.components.display.c8263a/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/components/display/c8263a/example/c8263a_example.c b/common2/components/display/c8263a/example/c8263a_example.c
new file mode 100644
index 00000000..8e29afa3
--- /dev/null
+++ b/common2/components/display/c8263a/example/c8263a_example.c
@@ -0,0 +1,201 @@
+/**
+ * \file
+ *
+ * \brief C8263A LCD Glass component example for SAM.
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \mainpage
+ * \section intro Introduction
+ * This is the documentation for the data structures, functions, variables,
+ * defines, enums, and typedefs for the C8263A LCD Glass component example.
+ * It also comes bundled with an application-example of usage.
+ *
+ * This example demonstrates how to use the C8263A LCD Glass driver.
+ *
+ * The supported board list:
+ *    - SAM L22 Xplained Pro B
+ *
+ * \section compilinfo Compilation Information
+ * This software is written for GNU GCC and IAR Embedded Workbench
+ * for Atmel. Other compilers may or may not work.
+ *
+ * \section deviceinfo Device Information
+ * The TSLCD1 Xplained Pro extension board must be connected to SAM devices.
+ *
+ * \section configinfo Configuration Information
+ * - PC terminal settings:
+ *   - 38400 bps,
+ *   - 8 data bits,
+ *   - no parity bit,
+ *   - 1 stop bit,
+ *   - no flow control.
+ *
+ * \section contactinfo Contact Information
+ * For further information, visit
+ * <A href="http://www.atmel.com">Atmel</A>.\n
+ * Support and FAQ: http://www.atmel.com/design-support/
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include <string.h>
+#include "config_c8263a.h"
+struct usart_module usart_instance;
+
+/**
+ *  Configure serial console.
+ */
+static void configure_console(void)
+{
+	struct usart_config config_usart;
+	usart_get_config_defaults(&config_usart);
+	config_usart.baudrate = 38400;
+	config_usart.mux_setting = EDBG_CDC_SERCOM_MUX_SETTING;
+	config_usart.pinmux_pad0 = EDBG_CDC_SERCOM_PINMUX_PAD0;
+	config_usart.pinmux_pad1 = EDBG_CDC_SERCOM_PINMUX_PAD1;
+	config_usart.pinmux_pad2 = EDBG_CDC_SERCOM_PINMUX_PAD2;
+	config_usart.pinmux_pad3 = EDBG_CDC_SERCOM_PINMUX_PAD3;
+	stdio_serial_init(&usart_instance, EDBG_CDC_MODULE, &config_usart);
+	usart_enable(&usart_instance);
+}
+
+static void c8263a_icon_test(void)
+{
+	c8263a_show_icon(C8263A_ICON_COLON);
+	delay_s(1);
+	c8263a_show_battery(C8263A_BATTERY_THREE);
+	delay_s(1);
+	c8263a_show_battery(C8263A_BATTERY_ONE);
+	delay_s(1);
+	c8263a_show_wireless(C8263A_WIRELESS_THREE);
+	delay_s(1);
+	c8263a_show_wireless(C8263A_WIRELESS_TWO);
+	delay_s(1);
+	c8263a_show_icon(C8263A_ICON_ARROW_UP);
+	delay_s(1);
+	c8263a_show_icon(C8263A_ICON_ARROW_DWON);
+	delay_s(1);
+	c8263a_show_icon(C8263A_ICON_ARROW_LEFT);
+	delay_s(1);
+	c8263a_show_icon(C8263A_ICON_ARROW_RIGHT);
+	delay_s(1);
+	c8263a_show_icon(C8263A_ICON_ARROW_CORNER);
+	delay_s(1);
+	c8263a_clear_icon(C8263A_ICON_COLON);
+}
+static void c8263a_blink_test(void)
+{
+	c8263a_blink_icon_start(C8263A_ICON_USB);
+	c8263a_blink_icon_start(C8263A_ICON_ATMEL);
+	delay_s(1);
+	c8263a_blink_icon_stop(C8263A_ICON_USB);
+}
+static void c8263a_text_test(void)
+{
+	c8263a_clear_text();
+	c8263a_show_text((const uint8_t *)"Hi");
+	delay_s(1);
+	c8263a_clear_text();
+	c8263a_show_text((const uint8_t *)"Hello");
+	delay_s(1);
+	c8263a_clear_text();
+	c8263a_show_text((const uint8_t *)"Atmel");
+}
+
+static void c8263a_num_dec_test(void)
+{
+	c8263a_clear_numeric_dec();
+	c8263a_show_numeric_dec(12);
+	delay_s(1);
+	c8263a_clear_numeric_dec();
+	c8263a_show_numeric_dec(345);
+	delay_s(1);
+	c8263a_clear_numeric_dec();
+	c8263a_show_numeric_dec(6789);
+	delay_s(1);
+	c8263a_clear_numeric_dec();
+	c8263a_show_numeric_dec(-98765);
+	delay_s(1);
+	c8263a_clear_numeric_dec();
+	c8263a_show_numeric_dec(-198765);
+}
+
+static void c8263a_animation_test(void)
+{
+	c8263a_circular_animation_start(11,0x0f);
+}
+
+/**
+ * \brief main function : do init and loop
+ */
+int main(void)
+{
+	system_init();
+	configure_console();
+	delay_init();
+
+	/* Turn on the backlight. */
+	port_pin_set_output_level(SLCD_BACLKLIGHT,true);
+
+	printf("Start SLCD test\r\n");
+	/* Initialize the C8263A LCD glass component. */
+	c8263a_init();
+
+	c8263a_show_all();
+	c8263a_set_contrast(0xc);
+	delay_s(1);
+	c8263a_clear_all();
+
+	c8263a_icon_test();
+	delay_s(1);
+	c8263a_blink_test();
+	delay_s(1);
+	c8263a_text_test();
+	delay_s(1);
+	c8263a_num_dec_test();
+	delay_s(1);
+	c8263a_animation_test();
+	while (1) {
+	}
+}
+
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_board.h b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_clocks.h b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_slcd.h b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_slcd.h
new file mode 100644
index 00000000..94ee8108
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/conf_slcd.h
@@ -0,0 +1,141 @@
+/**
+ * \file
+ *
+ * \brief SAM SLCD Driver Configuration Header
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLCD_H_INCLUDED
+#define CONF_SLCD_H_INCLUDED
+
+/** Select SLCD clock. Use 32.768KHz OSCULP32K or XOSC32K for SLCD clock.
+ *  0 : From OSCULP32K
+ *  1 : From XOSC32K
+ */
+#define CONF_SLCD_CLOCK_SOURCE    0
+
+/** SLCD Duty Setting
+ *  0:Static duty
+ *  1:1/2 duty
+ *  2:1/3 duty
+ *  3:1/4 duty
+*/
+#define CONF_SLCD_DUTY         5
+
+/**
+ * SLCD Bias Setting.
+ *  0:Static bias
+ *  1:1/2 bias
+ *  2:1/3 bias
+ *  3:1/4 bias
+ */
+#define CONF_SLCD_BIAS         3
+
+/**
+ * SLCD Frame Frequency.
+ * The optimal frame frequency should be in range from 30Hz up to 100Hz
+ * to avoid flickering and ghosting effect.
+ * To get the frame frequency, CLK_SLCD_OSC is first divided by a prescaler
+ * from 16 to 128 then divided by 1 up to 8 as following.
+ * 
+ * FrameRate = CLK_SLCD_OSC / (PVAL*(CKDIV+1)(DUTY+1))
+ *
+ * SLCD Prescaler Value (PVAL).
+ * 0 : 16 prescaler
+ * 1 : 32 prescaler
+ * 2 : 64 prescaler
+ * 3 : 128 prescaler
+ *
+ * SLCD Clock divider (CKDIV)
+ * 0 : CKDIV is 0
+ * 1 : CKDIV is 1
+ * 2 : CKDIV is 2
+ * 3 : CKDIV is 3
+ * 4 : CKDIV is 4
+ * 5 : CKDIV is 5
+ * 6 : CKDIV is 6
+ * 7 : CKDIV is 7
+ */
+#define CONF_SLCD_PVAL         0
+#define CONF_SLCD_CKDIV        2
+
+/** Internal/External VLCD selection.
+* 0 : Internal VLCD generation
+* 1 : External VLCD generation
+*/
+#define CONF_SLCD_VLCD_SEL        0
+
+/** Reference refresh frequency. 
+*  0: Bias Reference refresh frequency is 2KHz
+*  1: Bias Reference refresh frequency is 1KHz
+*  2: Bias Reference refresh frequency is 500Hz
+*  3: Bias Reference refresh frequency is 250Hz
+*  4: Bias Reference refresh frequency is 125Hz
+*  5: Bias Reference refresh frequency is 62.5Hz
+*/
+#define CONF_SLCD_REF_REFRESH_FREQ        0
+
+/** Power fefresh frequency.
+*  0: Charge pump refresh frequency is 2KHz
+*  1: Charge pump refresh frequency is 1KHz
+*  2: Charge pump refresh frequency is 500Hz
+*  3: Charge pump refresh frequency is 250Hz
+ */
+#define CONF_SLCD_POWER_REFRESH_FREQ       0
+ 
+/** LCD Working Power Mode.
+ * 0:LCD power automatically select regualation mode or pump mode.
+ * 1:LCD power use step-up pump loop only.
+ * 2:LCD power use step-down drop-out regulation loop only.
+ */ 
+#define CONF_SLCD_POWER_MODE       0
+
+/** COM/SEG PIN Selection.
+ * There are 52 LCD pins, but SLCD can drive up to 48 LCD pins which can be
+ * individually enabled or disabled according to the LCD glass. The number of LCD pins
+ * enabled should not be higher than the maximum of COM and SEG lines supported.
+ * COM and SEG lines are always assigned in ascending order.
+ * CONF_SLCD_PIN_L_MASK is pin mask [31,0]
+ * CONF_SLCD_PIN_H_MASK is pin mask [51,32]
+ */ 
+#define CONF_SLCD_PIN_L_MASK       0xCFFFFFC0
+#define CONF_SLCD_PIN_H_MASK       0x00000FF0
+#endif
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/config_c8263a.h b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/config_c8263a.h
new file mode 100644
index 00000000..7cae9068
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/config_c8263a.h
@@ -0,0 +1,141 @@
+/**
+ * \file
+ *
+ * \brief C8263A configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/** Configuration of the C8263A LCD glass driver */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_C8263A_H_INCLUDED
+#define CONF_C8263A_H_INCLUDED
+#include "slcd.h"
+/**
+ * \name Circular Animation Shift Direction
+ * @{
+ */
+#define C8263A_CSR_DIR      SLCD_CIRCULAR_SHIFT_LEFT
+/** @} */
+
+
+/** Init contrast configuration, it's wthin [0-15]. */
+#define CONF_C8263A_CONTRAST  0xf
+
+
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C8263A_FC0+1).
+ */
+#define CONF_C8263A_FC0     2
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C8263A_FC0+1).
+ */
+#define CONF_C8263A_FC1     2
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C8263A_FC0+1).
+ */
+#define CONF_C8263A_FC2     1
+
+/** Blink timer configuration. */
+#define CONF_C8263A_BLINK_TIMER                 SLCD_FRAME_COUNTER_0
+
+/** Circular animation configuration. */
+#define CONF_C8263A_CIRCULAR_ANIMATION_TIMER    SLCD_FRAME_COUNTER_0
+
+
+#define C8263A_NB_OF_COM 8
+#define C8263A_NB_OF_SEG 24
+
+#define C8263A_CHAR_SEG_INDEX_S 8
+#define C8263A_CHAR_SEG_INDEX_E 23
+#define C8263A_DIGITAL_SEG_INDEX_S 1
+#define C8263A_DIGITAL_SEG_INDEX_E 7
+
+#define C8263A_CHAR_MAP_NUM_SEG 2
+#define C8263A_CHAR_MASK 0x00ff0003 
+#define C8263A_DIGITAL_MAP_NUM_SEG 1
+#define C8263A_DIGITAL_MASK 0x00ff8000
+
+#define C8263A_MAX_CHAR 8
+#define C8263A_MAX_DIGITAL  5
+
+/**
+ * \name LCD component C42364A segment map default definitions
+ * @{
+ */
+/* Icon with selected segments blinking feature */
+#define C8263A_ICON_USB            2, 0
+#define C8263A_ICON_COLON          0, 0
+#define C8263A_ICON_BAT            4, 2
+#define C8263A_ICON_ATMEL          1, 0
+/* Icon without selected segments blinking feature */
+#define C8263A_ICON_MINUS          0, 17
+#define C8263A_ICON_MINUS_SEG1     0, 16
+#define C8263A_ICON_MINUS_SEG2     0, 18
+#define C8263A_ICON_DOT_1          7, 1
+#define C8263A_ICON_DOT_2          7, 4
+#define C8263A_ICON_DOT_3          7, 5
+#define C8263A_ICON_DOT_4          7, 6
+#define C8263A_ICON_DOT_5          7, 7
+#define C8263A_ICON_BAT_LEVEL_1    4, 3
+#define C8263A_ICON_BAT_LEVEL_2    5, 2
+#define C8263A_ICON_BAT_LEVEL_3    5, 3
+#define C8263A_ICON_WLESS_LEVEL_0  0, 2
+#define C8263A_ICON_WLESS_LEVEL_1  0, 3
+#define C8263A_ICON_WLESS_LEVEL_2  1, 2
+#define C8263A_ICON_WLESS_LEVEL_3  1, 3
+#define C8263A_ICON_ARROW_UP       3, 0
+#define C8263A_ICON_ARROW_DWON     4, 0
+#define C8263A_ICON_ARROW_LEFT     5, 0
+#define C8263A_ICON_ARROW_RIGHT    6, 0
+#define C8263A_ICON_ARROW_CORNER   7, 0
+#define C8263A_ICON_AM             0, 21
+#define C8263A_ICON_PM             0, 20
+#define C8263A_ICON_DEGREE_C       0, 19
+#define C8263A_ICON_DEGREE_F       0, 22
+#define C8263A_ICON_VOLT           0, 15
+#define C8263A_ICON_CUR            0, 23
+#define C8263A_ICON_MILLI_VOLT     0, 14
+#define C8263A_ICON_MICRO_VOLT     0, 13
+
+/* @} */
+
+#endif /* CONF_C8263A_H_INCLUDED */
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..4a2e3a03
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "C8263a LCD Glass Example for SAML22"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../c8263a_example.c ../../../c8263a.c ../../../../../../../sam0/drivers/slcd/slcd.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_slcd.h ../config_c8263a.h ../../../c8263a.h ../../../../../../../sam0/drivers/slcd/slcd.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/slcd ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/port ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=false SYSTICK_MODE BOARD=SAML22_XPLAINED_PRO_B __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/Makefile b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/asf.h b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..ba421f15
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,111 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Polled API

+#include <sercom.h>

+

+// From module: SERCOM USART - Serial Communications (Polled APIs)

+#include <usart.h>

+

+// From module: SLCD - Segment Liquid Crystal Display Controller

+#include <slcd.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Segment LCD

+#include <c8263a.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/config.mk b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..1cc68a04
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,170 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = c8263a_example_flash.elf
+TARGET_SRAM = c8263a_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/c8263a/c8263a.c         \
+       common2/components/display/c8263a/example/c8263a_example.c \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml22_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/slcd/slcd.c                           \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/display/c8263a                  \
+       common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/slcd                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO_B                     \
+       -D SYSTICK_MODE                                    \
+       -D USART_CALLBACK_MODE=false                       \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/asf.h b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..ba421f15
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/asf.h
@@ -0,0 +1,111 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Polled API

+#include <sercom.h>

+

+// From module: SERCOM USART - Serial Communications (Polled APIs)

+#include <usart.h>

+

+// From module: SLCD - Segment Liquid Crystal Display Controller

+#include <slcd.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Segment LCD

+#include <c8263a.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example.eww b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example.eww
new file mode 100644
index 00000000..076b2a21
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\c8263a_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example_flash.ewd b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example_flash.ewd
new file mode 100644
index 00000000..69c49251
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example_flash.ewp b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example_flash.ewp
new file mode 100644
index 00000000..e938f844
--- /dev/null
+++ b/common2/components/display/c8263a/example/saml22n18a_saml22_xplained_pro_b/iar/c8263a_example_flash.ewp
@@ -0,0 +1,2562 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=false</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=false</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>c8263a_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>c8263a_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=false</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=false</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>c8263a_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>c8263a_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>slcd</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd/slcd.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/slcd/slcd.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>c8263a</name>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../c8263a_example.c</name>
+						</file>
+						<group>
+							<name>saml22n18a_saml22_xplained_pro_b</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../config_c8263a.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../c8263a.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../c8263a.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/c8263a/module_config/config_c8263a.h b/common2/components/display/c8263a/module_config/config_c8263a.h
new file mode 100644
index 00000000..7cae9068
--- /dev/null
+++ b/common2/components/display/c8263a/module_config/config_c8263a.h
@@ -0,0 +1,141 @@
+/**
+ * \file
+ *
+ * \brief C8263A configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/** Configuration of the C8263A LCD glass driver */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_C8263A_H_INCLUDED
+#define CONF_C8263A_H_INCLUDED
+#include "slcd.h"
+/**
+ * \name Circular Animation Shift Direction
+ * @{
+ */
+#define C8263A_CSR_DIR      SLCD_CIRCULAR_SHIFT_LEFT
+/** @} */
+
+
+/** Init contrast configuration, it's wthin [0-15]. */
+#define CONF_C8263A_CONTRAST  0xf
+
+
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C8263A_FC0+1).
+ */
+#define CONF_C8263A_FC0     2
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C8263A_FC0+1).
+ */
+#define CONF_C8263A_FC1     2
+/** Frame count 0 configuration.
+	Prescaler is not bypassed,the overflow value is (CONF_C8263A_FC0+1).
+ */
+#define CONF_C8263A_FC2     1
+
+/** Blink timer configuration. */
+#define CONF_C8263A_BLINK_TIMER                 SLCD_FRAME_COUNTER_0
+
+/** Circular animation configuration. */
+#define CONF_C8263A_CIRCULAR_ANIMATION_TIMER    SLCD_FRAME_COUNTER_0
+
+
+#define C8263A_NB_OF_COM 8
+#define C8263A_NB_OF_SEG 24
+
+#define C8263A_CHAR_SEG_INDEX_S 8
+#define C8263A_CHAR_SEG_INDEX_E 23
+#define C8263A_DIGITAL_SEG_INDEX_S 1
+#define C8263A_DIGITAL_SEG_INDEX_E 7
+
+#define C8263A_CHAR_MAP_NUM_SEG 2
+#define C8263A_CHAR_MASK 0x00ff0003 
+#define C8263A_DIGITAL_MAP_NUM_SEG 1
+#define C8263A_DIGITAL_MASK 0x00ff8000
+
+#define C8263A_MAX_CHAR 8
+#define C8263A_MAX_DIGITAL  5
+
+/**
+ * \name LCD component C42364A segment map default definitions
+ * @{
+ */
+/* Icon with selected segments blinking feature */
+#define C8263A_ICON_USB            2, 0
+#define C8263A_ICON_COLON          0, 0
+#define C8263A_ICON_BAT            4, 2
+#define C8263A_ICON_ATMEL          1, 0
+/* Icon without selected segments blinking feature */
+#define C8263A_ICON_MINUS          0, 17
+#define C8263A_ICON_MINUS_SEG1     0, 16
+#define C8263A_ICON_MINUS_SEG2     0, 18
+#define C8263A_ICON_DOT_1          7, 1
+#define C8263A_ICON_DOT_2          7, 4
+#define C8263A_ICON_DOT_3          7, 5
+#define C8263A_ICON_DOT_4          7, 6
+#define C8263A_ICON_DOT_5          7, 7
+#define C8263A_ICON_BAT_LEVEL_1    4, 3
+#define C8263A_ICON_BAT_LEVEL_2    5, 2
+#define C8263A_ICON_BAT_LEVEL_3    5, 3
+#define C8263A_ICON_WLESS_LEVEL_0  0, 2
+#define C8263A_ICON_WLESS_LEVEL_1  0, 3
+#define C8263A_ICON_WLESS_LEVEL_2  1, 2
+#define C8263A_ICON_WLESS_LEVEL_3  1, 3
+#define C8263A_ICON_ARROW_UP       3, 0
+#define C8263A_ICON_ARROW_DWON     4, 0
+#define C8263A_ICON_ARROW_LEFT     5, 0
+#define C8263A_ICON_ARROW_RIGHT    6, 0
+#define C8263A_ICON_ARROW_CORNER   7, 0
+#define C8263A_ICON_AM             0, 21
+#define C8263A_ICON_PM             0, 20
+#define C8263A_ICON_DEGREE_C       0, 19
+#define C8263A_ICON_DEGREE_F       0, 22
+#define C8263A_ICON_VOLT           0, 15
+#define C8263A_ICON_CUR            0, 23
+#define C8263A_ICON_MILLI_VOLT     0, 14
+#define C8263A_ICON_MICRO_VOLT     0, 13
+
+/* @} */
+
+#endif /* CONF_C8263A_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/doxygen/common2.components.display.ssd1306/doxyfile.doxygen b/common2/components/display/ssd1306/doxygen/common2.components.display.ssd1306/doxyfile.doxygen
new file mode 100644
index 00000000..7449fd39
--- /dev/null
+++ b/common2/components/display/ssd1306/doxygen/common2.components.display.ssd1306/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED controller"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../ssd1306.c ../../ssd1306.h ../../module_config/conf_ssd1306.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/doxygen/common2.components.display.ssd1306/doxygen_module_mainpage.h b/common2/components/display/ssd1306/doxygen/common2.components.display.ssd1306/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/components/display/ssd1306/doxygen/common2.components.display.ssd1306/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_board.h b/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_board.h
new file mode 100644
index 00000000..41c619a1
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_clocks.h b/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..7ab09702
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_clocks.h
@@ -0,0 +1,177 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_spi.h b/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..3fa424f7
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_ssd1306.h b/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..f2d19627
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D11 Xplained Pro
+#  define SSD1306_SPI                 EXT1_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT1_PIN_5
+#  define SSD1306_RES_PIN             EXT1_PIN_10
+#  define SSD1306_CS_PIN              EXT1_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#  define SSD1306_SPI_PINMUX_PAD2     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/samd11_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..a24f5617
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM D11 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/samd11_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd11/include/samd11.h ../../../../../../../sam0/utils/cmsis/samd11/include/samd11c14a.h ../../../../../../../sam0/utils/cmsis/samd11/include/samd11d14am.h ../../../../../../../sam0/utils/cmsis/samd11/include/samd11d14as.h ../../../../../../../sam0/utils/cmsis/samd11/include/samd11d14au.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samd11/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samd11/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11c14a.h ../../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14am.h ../../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14as.h ../../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14au.h ../../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/samd11_xplained_pro/samd11_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd11/include ../../../../../../../sam0/utils/cmsis/samd11/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd11_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAMD11_XPLAINED_PRO __SAMD11D14AM__ __SAMD11D14AM__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/Makefile b/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/asf.h b/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..e1a8cd65
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD11

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/config.mk b/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..fbfaa4a8
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd11d14am
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samd11_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd09_d10_d11/clock.c \
+       sam0/drivers/system/clock/clock_samd09_d10_d11/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd11/source/gcc/startup_samd11.c \
+       sam0/utils/cmsis/samd11/source/system_samd11.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/samd11_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd11_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd09_d10_d11     \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd10_d11 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd11/include                    \
+       sam0/utils/cmsis/samd11/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/samd11_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd11/gcc/samd11d14am_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd11/gcc/samd11d14am_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd11_xplained_pro/debug_scripts/gcc/samd11_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd11_xplained_pro/debug_scripts/gcc/samd11_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD11_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD11D14AM__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/asf.h b/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..e1a8cd65
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD11

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..2685f22f
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd11_xplained_pro/debug_scripts/iar/samd11_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD11\ATSAMD11D14AM.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD11\samd11d14am-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd11_xplained_pro/debug_scripts/iar/samd11_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD11\ATSAMD11D14AM.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..aa9a0fd5
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd11_xplained_pro/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2454 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD11D14AM	Atmel ATSAMD11D14AM</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+					<state>__SAMD11D14AM__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+					<state>__SAMD11D14AM__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd11/iar/samd11d14am_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD11D14AM	Atmel ATSAMD11D14AM</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+					<state>__SAMD11D14AM__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+					<state>__SAMD11D14AM__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd11/iar/samd11d14am_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>samd11_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd09_d10_d11</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd10_d11</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd11</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/source/iar/startup_samd11.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14am.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14as.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11c14a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom0.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/samd11c14a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/samd11d14as.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/samd11d14au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/samd11d14am.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd11/include/samd11.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd11_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd11_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd11_xplained_pro/samd11_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_board.h b/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..4235fccd
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_board.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Board configuration for the ST7565R example
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+// Enable the OLED screen
+#define CONF_BOARD_OLED_UG_2832HSWEG04
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_clocks.h b/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..47326488
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,172 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_spi.h b/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..9def00ab
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 SPI configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_ssd1306.h b/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..e6db356e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D20 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/samd20_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..21fbe0d7
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM D20 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/samd20_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h ../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd20/include ../../../../../../../sam0/utils/cmsis/samd20/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd20 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd20_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAMD20_XPLAINED_PRO __SAMD20J18__ __SAMD20J18__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/Makefile b/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/asf.h b/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..95e3c0d2
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/config.mk b/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..3257530f
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/samd20_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/samd20_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/asf.h b/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..95e3c0d2
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..7e71700b
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..c4be1f99
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd20_xplained_pro/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2583 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd20</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd20_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>samd20_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_board.h b/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..ad644c05
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_clocks.h b/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..2a59aa71
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_clocks.h
@@ -0,0 +1,197 @@
+/**

+ * \file

+ *

+ * \brief SAM D21 Clock configuration

+ *

+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.

+ *

+ * \asf_license_start

+ *

+ * \page License

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright notice,

+ *    this list of conditions and the following disclaimer.

+ *

+ * 2. Redistributions in binary form must reproduce the above copyright notice,

+ *    this list of conditions and the following disclaimer in the documentation

+ *    and/or other materials provided with the distribution.

+ *

+ * 3. The name of Atmel may not be used to endorse or promote products derived

+ *    from this software without specific prior written permission.

+ *

+ * 4. This software may only be redistributed and used in connection with an

+ *    Atmel microcontroller product.

+ *

+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED

+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR

+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ * \asf_license_stop

+ *

+ */

+/*

+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>

+ */

+#include <clock.h>

+

+#ifndef CONF_CLOCKS_H_INCLUDED

+#  define CONF_CLOCKS_H_INCLUDED

+

+/* System clock bus configuration */

+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false

+#  define CONF_CLOCK_FLASH_WAIT_STATES            0

+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+

+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */

+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1

+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true

+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false

+

+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */

+#  define CONF_CLOCK_XOSC_ENABLE                  false

+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL

+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL

+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768

+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true

+#  define CONF_CLOCK_XOSC_ON_DEMAND               true

+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false

+

+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */

+#  define CONF_CLOCK_XOSC32K_ENABLE               false

+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL

+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536

+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false

+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false

+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true

+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true

+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false

+

+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */

+#  define CONF_CLOCK_OSC32K_ENABLE                false

+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130

+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true

+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true

+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true

+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false

+

+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */

+#  define CONF_CLOCK_DFLL_ENABLE                  false

+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN

+#  define CONF_CLOCK_DFLL_ON_DEMAND               false

+

+/* DFLL open loop mode configuration */

+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)

+

+/* DFLL closed loop mode configuration */

+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1

+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6

+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true

+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true

+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true

+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true

+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)

+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)

+

+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */

+#  define CONF_CLOCK_DPLL_ENABLE                  false

+#  define CONF_CLOCK_DPLL_ON_DEMAND               true

+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false

+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false

+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false

+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false

+

+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT

+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K

+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT

+

+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768

+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1

+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000

+

+/* DPLL GCLK reference configuration */

+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1

+/* DPLL GCLK lock timer configuration */

+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1

+

+/* Set this to true to configure the GCLK when running clocks_init. If set to

+ * false, none of the GCLK generators will be configured in clocks_init(). */

+#  define CONF_CLOCK_CONFIGURE_GCLK               true

+

+/* Configure GCLK generator 0 (Main Clock) */

+#  define CONF_CLOCK_GCLK_0_ENABLE                true

+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_0_PRESCALER             1

+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 1 */

+#  define CONF_CLOCK_GCLK_1_ENABLE                false

+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_1_PRESCALER             1

+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 2 (RTC) */

+#  define CONF_CLOCK_GCLK_2_ENABLE                false

+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K

+#  define CONF_CLOCK_GCLK_2_PRESCALER             32

+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 3 */

+#  define CONF_CLOCK_GCLK_3_ENABLE                true

+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_3_PRESCALER             16

+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 4 */

+#  define CONF_CLOCK_GCLK_4_ENABLE                false

+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_4_PRESCALER             1

+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 5 */

+#  define CONF_CLOCK_GCLK_5_ENABLE                false

+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_5_PRESCALER             1

+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 6 */

+#  define CONF_CLOCK_GCLK_6_ENABLE                false

+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_6_PRESCALER             1

+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 7 */

+#  define CONF_CLOCK_GCLK_7_ENABLE                false

+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_7_PRESCALER             1

+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 8 */

+#  define CONF_CLOCK_GCLK_8_ENABLE                false

+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_8_PRESCALER             1

+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false

+

+#endif /* CONF_CLOCKS_H_INCLUDED */

diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_spi.h b/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_ssd1306.h b/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..028279c9
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/samd21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..42601e0b
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM D21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h ../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd21/include ../../../../../../../sam0/utils/cmsis/samd21/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAMD21_XPLAINED_PRO __SAMD21J18A__ __SAMD21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/Makefile b/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/asf.h b/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..b6887f9a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/config.mk b/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..d8d62cb8
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/samd21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/samd21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/asf.h b/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..b6887f9a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..451f82ab
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..9bfe875f
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samd21_xplained_pro/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2622 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>samd21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_board.h b/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_clocks.h b/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..df421904
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_spi.h b/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_ssd1306.h b/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..3edb111d
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/saml21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..b1dd3c6e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM L21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/saml21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml21/include ../../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAML21_XPLAINED_PRO __SAML21J18A__ __SAML21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/Makefile b/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/asf.h b/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..9a3d3cc8
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/config.mk b/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..a68feea8
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/saml21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include                    \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/asf.h b/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..9a3d3cc8
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..250c73cf
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..9b75a569
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2514 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>saml21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h</name>
+							</file>
+						</group>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_board.h b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_clocks.h b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..2f1fda00
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,201 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_spi.h b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_ssd1306.h b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_ssd1306.h
new file mode 100644
index 00000000..3edb111d
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..a98b630f
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM L21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml21/include_b ../../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml21_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAML21_XPLAINED_PRO __SAML21J18B__ __SAML21J18B__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/Makefile b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/asf.h b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..9a3d3cc8
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/config.mk b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..b3283e82
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18b
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml21_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/saml21_xplained_pro_b \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include_b                  \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/saml21_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML21J18B__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/asf.h b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..9a3d3cc8
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..2bca7a88
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18b-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..d4d1695a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml21_xplained_pro_b/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2556 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>saml21_xplained_pro_b</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include_b</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_board.h b/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_clocks.h b/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_spi.h b/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_ssd1306.h b/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..9219b43e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L22 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/saml22_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..49319346
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM L22 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAML22_XPLAINED_PRO __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/Makefile b/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/asf.h b/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..0415f510
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/config.mk b/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..8c0161ed
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml22_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/saml22_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/saml22_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/asf.h b/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..0415f510
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..03c7016f
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..481ae52c
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2541 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>saml22_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_board.h b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_clocks.h b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_spi.h b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_ssd1306.h b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_ssd1306.h
new file mode 100644
index 00000000..9219b43e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L22 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..ec8ce4ba
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM L22 Xplained Pro B"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAML22_XPLAINED_PRO_B __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/Makefile b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/asf.h b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..0415f510
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/config.mk b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..50b02fb1
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml22_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/saml22_xplained_pro_b \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/saml22_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO_B                     \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/asf.h b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..0415f510
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..69c49251
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..30f4bd86
--- /dev/null
+++ b/common2/components/display/ssd1306/example/saml22_xplained_pro_b/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2541 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>__SAML22N18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>saml22_xplained_pro_b</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_board.h b/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..814b959e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_clocks.h b/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..d7bb7875
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                true
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             16
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_spi.h b/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..b4187ac5
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_ssd1306.h b/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..d58c8f4a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM R21 Xplained Pro
+#  define SSD1306_SPI                 EXT1_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT1_PIN_5
+#  define SSD1306_RES_PIN             EXT1_PIN_10
+#  define SSD1306_CS_PIN              EXT1_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/samr21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..79903647
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM R21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/samr21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/port.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h ../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samr21/include ../../../../../../../sam0/utils/cmsis/samr21/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samr21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAMR21_XPLAINED_PRO __SAMR21G18A__ __SAMR21G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/Makefile b/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/asf.h b/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..b6887f9a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/config.mk b/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..8f731ae2
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr21g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samr21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr21/source/gcc/startup_samr21.c \
+       sam0/utils/cmsis/samr21/source/system_samr21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/samr21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr21/include                    \
+       sam0/utils/cmsis/samr21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/samr21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR21_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMR21G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/asf.h b/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..b6887f9a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..4fe70101
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR21\samr21g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..4765a622
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr21_xplained_pro/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2490 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>samr21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/iar/startup_samr21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_board.h b/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_board.h
new file mode 100644
index 00000000..29176c86
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_clocks.h b/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..2fa7493a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_spi.h b/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..f44cac37
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 SPI configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_ssd1306.h b/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..b8880b75
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM R30 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/display/ssd1306/example/samr30_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..7faa5678
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SSD1306 OLED Controller example for SAM R30 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../ssd1306_example.c ../../../ssd1306.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../services/delay/sam0/systick_counter.c ../../../../../../../sam0/boards/samr30_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_spi.h ../conf_ssd1306.h ../../../ssd1306.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/port.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h ../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/systick_counter.h ../../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../../../../../sam0/drivers/port ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samr30/include ../../../../../../../sam0/utils/cmsis/samr30/source ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samr30 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30 ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/sercom ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samr30_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true SPI_CALLBACK_MODE=true SYSTICK_MODE BOARD=SAMR30_XPLAINED_PRO __SAMR30G18A__ __SAMR30G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/Makefile b/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/asf.h b/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..672b7ebe
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/config.mk b/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..48f4d7a4
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/gcc/config.mk
@@ -0,0 +1,166 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr30g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = ssd1306_example_flash.elf
+TARGET_SRAM = ssd1306_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/example/ssd1306_example.c \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samr30_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samr30/clock.c     \
+       sam0/drivers/system/clock/clock_samr30/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr30/source/gcc/startup_samr30.c \
+       sam0/utils/cmsis/samr30/source/system_samr30.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/components/display/ssd1306/example/samr30_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr30_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samr30             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr30 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr30/include                    \
+       sam0/utils/cmsis/samr30/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/display/ssd1306/example/samr30_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR30_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMR30G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/asf.h b/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..672b7ebe
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/asf.h
@@ -0,0 +1,104 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example.eww b/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example.eww
new file mode 100644
index 00000000..8318073e
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\ssd1306_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example_flash.ewd b/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example_flash.ewd
new file mode 100644
index 00000000..356aca08
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR30\samr30g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example_flash.ewp b/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example_flash.ewp
new file mode 100644
index 00000000..140da43a
--- /dev/null
+++ b/common2/components/display/ssd1306/example/samr30_xplained_pro/iar/ssd1306_example_flash.ewp
@@ -0,0 +1,2484 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>SYSTICK_MODE</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>ssd1306_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>ssd1306_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.c</name>
+					</file>
+					<group>
+						<name>example</name>
+						<file>
+							<name>$PROJ_DIR$/../../ssd1306_example.c</name>
+						</file>
+						<group>
+							<name>samr30_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr30</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/iar/startup_samr30.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr30_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/display/ssd1306/example/ssd1306_example.c b/common2/components/display/ssd1306/example/ssd1306_example.c
new file mode 100644
index 00000000..f5a49301
--- /dev/null
+++ b/common2/components/display/ssd1306/example/ssd1306_example.c
@@ -0,0 +1,120 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver example.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \mainpage
+ *
+ * \section intro Introduction
+ * This simple example shows how to use the \ref ssd1306_oled_controller_group
+ * for interfacing the SSD1306 controller
+ *
+ * \section files Main files:
+ * - ssd1306_example.c: the SSD1306 low level driver example
+ * - conf_ssd1306.h: configuration of the SSD1306 controller and interface
+ * - conf_board.h: configuration for the board
+ * - conf_clocks.h: configuration for the clocks used in the device
+ * - interface configuration files.
+ *
+ * \section apiinfo SSD1306 low level driver API
+ * The SSD1306 low level driver API can be found
+ * \ref ssd1306_lcd_controller_group "here".
+ *
+ * \section deviceinfo Device Info
+ * All devices with a SPI can be used.
+ * \note Parallel interface is also possible, but not currently supported by the
+ * driver.
+ *
+ * \section exampledescription Description of the example
+ * The display is initialized and a pattern with alternating lines are drawn to
+ * the entire screen. After this the screen is scrolled line by line using the
+ * hardware scrolling function available in the LCD controller.
+ *
+ * \section compinfo Compilation Info
+ * This software was written for the GNU GCC and IAR.
+ * Other compilers may or may not work.
+ *
+ * \section contactinfo Contact Information
+ * For further information, visit
+ * <A href="http://www.atmel.com/">Atmel</A>.\n
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <asf.h>
+
+int main(void)
+{
+	//! the page address to write to
+	uint8_t page_address;
+	//! the column address, or the X pixel.
+	uint8_t column_address;
+	//! store the LCD controller start draw line
+	uint8_t start_line_address = 0;
+
+	system_init();
+	delay_init();
+
+	// Initialize SPI and SSD1306 controller
+	ssd1306_init();
+
+	// set addresses at beginning of display
+	ssd1306_set_page_address(0);
+	ssd1306_set_column_address(0);
+
+	// fill display with lines
+	for (page_address = 0; page_address <= 8; page_address++) {
+		ssd1306_set_page_address(page_address);
+		for (column_address = 0; column_address < 128; column_address++) {
+			ssd1306_set_column_address(column_address);
+			/* fill every other pixel in the display. This will produce
+			horizontal lines on the display. */
+			ssd1306_write_data(0x0f);
+		}
+	}
+
+	// scroll the display using hardware support in the LCD controller
+	while (true) {
+		ssd1306_set_display_start_line_address(start_line_address++);
+		delay_ms(250);
+	}
+}
diff --git a/common2/components/display/ssd1306/module_config/conf_ssd1306.h b/common2/components/display/ssd1306/module_config/conf_ssd1306.h
new file mode 100644
index 00000000..86ca7748
--- /dev/null
+++ b/common2/components/display/ssd1306/module_config/conf_ssd1306.h
@@ -0,0 +1,86 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+#ifdef EXT3_SPI_MODULE
+/* Interface configuration for SAM Xplained Pro */
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+#else
+/* Dummy Interface configuration */
+#  define SSD1306_SPI                 0
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              0
+#  define SSD1306_RES_PIN             0
+#  define SSD1306_CS_PIN              0
+
+#  define SSD1306_SPI_PINMUX_SETTING  0
+#  define SSD1306_SPI_PINMUX_PAD0     0
+#  define SSD1306_SPI_PINMUX_PAD1     0
+#  define SSD1306_SPI_PINMUX_PAD2     0
+#  define SSD1306_SPI_PINMUX_PAD3     0
+#endif
+
+/* Minimum clock period is 50ns@3.3V -> max frequency is 20MHz */
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/components/display/ssd1306/ssd1306.c b/common2/components/display/ssd1306/ssd1306.c
new file mode 100644
index 00000000..ca2cf63c
--- /dev/null
+++ b/common2/components/display/ssd1306/ssd1306.c
@@ -0,0 +1,185 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 OLED display controller driver.
+ *
+ * Copyright (c) 2012-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include "ssd1306.h"
+
+struct spi_module ssd1306_master;
+struct spi_slave_inst ssd1306_slave;
+
+/**
+ * \internal
+ * \brief Initialize the hardware interface
+ *
+ * Depending on what interface used for interfacing the OLED controller this
+ * function will initialize the necessary hardware.
+ */
+static void ssd1306_interface_init(void)
+{
+	struct spi_config config;
+	struct spi_slave_inst_config slave_config;
+
+	spi_slave_inst_get_config_defaults(&slave_config);
+	slave_config.ss_pin = SSD1306_CS_PIN;
+	spi_attach_slave(&ssd1306_slave, &slave_config);
+
+	spi_get_config_defaults(&config);
+
+	config.mux_setting = SSD1306_SPI_PINMUX_SETTING;
+	config.pinmux_pad0 = SSD1306_SPI_PINMUX_PAD0;
+	config.pinmux_pad1 = SSD1306_SPI_PINMUX_PAD1;
+	config.pinmux_pad2 = SSD1306_SPI_PINMUX_PAD2;
+	config.pinmux_pad3 = SSD1306_SPI_PINMUX_PAD3;
+	config.mode_specific.master.baudrate = SSD1306_CLOCK_SPEED;
+
+	spi_init(&ssd1306_master, SSD1306_SPI, &config);
+	spi_enable(&ssd1306_master);
+
+	struct port_config pin;
+	port_get_config_defaults(&pin);
+	pin.direction = PORT_PIN_DIR_OUTPUT;
+
+	port_pin_set_config(SSD1306_DC_PIN, &pin);
+	port_pin_set_config(SSD1306_RES_PIN, &pin);
+}
+
+/**
+ * \brief Initialize the OLED controller
+ *
+ * Call this function to initialize the hardware interface and the OLED
+ * controller. When initialization is done the display is turned on and ready
+ * to receive data.
+ */
+void ssd1306_init(void)
+{
+	// Initialize delay routine
+	delay_init();
+
+	// Initialize the interface
+	ssd1306_interface_init();
+
+	// Do a hard reset of the OLED display controller
+	ssd1306_hard_reset();
+
+	// Set the reset pin to the default state
+	port_pin_set_output_level(SSD1306_RES_PIN, true);
+
+	// 1/32 Duty (0x0F~0x3F)
+	ssd1306_write_command(SSD1306_CMD_SET_MULTIPLEX_RATIO);
+	ssd1306_write_command(0x1F);
+
+	// Shift Mapping RAM Counter (0x00~0x3F)
+	ssd1306_write_command(SSD1306_CMD_SET_DISPLAY_OFFSET);
+	ssd1306_write_command(0x00);
+
+	// Set Mapping RAM Display Start Line (0x00~0x3F)
+	ssd1306_write_command(SSD1306_CMD_SET_DISPLAY_START_LINE(0x00));
+
+	// Set Column Address 0 Mapped to SEG0
+	ssd1306_write_command(SSD1306_CMD_SET_SEGMENT_RE_MAP_COL127_SEG0);
+
+	// Set COM/Row Scan Scan from COM63 to 0
+	ssd1306_write_command(SSD1306_CMD_SET_COM_OUTPUT_SCAN_DOWN);
+
+	// Set COM Pins hardware configuration
+	ssd1306_write_command(SSD1306_CMD_SET_COM_PINS);
+	ssd1306_write_command(0x02);
+
+	ssd1306_set_contrast(0x8F);
+
+	// Disable Entire display On
+	ssd1306_write_command(SSD1306_CMD_ENTIRE_DISPLAY_AND_GDDRAM_ON);
+
+	ssd1306_display_invert_disable();
+
+	// Set Display Clock Divide Ratio / Oscillator Frequency (Default => 0x80)
+	ssd1306_write_command(SSD1306_CMD_SET_DISPLAY_CLOCK_DIVIDE_RATIO);
+	ssd1306_write_command(0x80);
+
+	// Enable charge pump regulator
+	ssd1306_write_command(SSD1306_CMD_SET_CHARGE_PUMP_SETTING);
+	ssd1306_write_command(0x14);
+
+	// Set VCOMH Deselect Level
+	ssd1306_write_command(SSD1306_CMD_SET_VCOMH_DESELECT_LEVEL);
+	ssd1306_write_command(0x40); // Default => 0x20 (0.77*VCC)
+
+	// Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
+	ssd1306_write_command(SSD1306_CMD_SET_PRE_CHARGE_PERIOD);
+	ssd1306_write_command(0xF1);
+
+	ssd1306_display_on();
+}
+
+/**
+ * \brief Writes a command to the display controller
+ *
+ * This functions pull pin D/C# low before writing to the controller. Different
+ * data write function is called based on the selected interface.
+ *
+ * \param command the command to write
+ */
+void ssd1306_write_command(uint8_t command)
+{
+	spi_select_slave(&ssd1306_master, &ssd1306_slave, true);
+	port_pin_set_output_level(SSD1306_DC_PIN, false);
+	spi_write_buffer_wait(&ssd1306_master, &command, 1);
+	spi_select_slave(&ssd1306_master, &ssd1306_slave, false);
+}
+
+/**
+ * \brief Write data to the display controller
+ *
+ * This functions sets the pin D/C# before writing to the controller. Different
+ * data write function is called based on the selected interface.
+ *
+ * \param data the data to write
+ */
+void ssd1306_write_data(uint8_t data)
+{
+	spi_select_slave(&ssd1306_master, &ssd1306_slave, true);
+	port_pin_set_output_level(SSD1306_DC_PIN, true);
+	spi_write_buffer_wait(&ssd1306_master, &data, 1);
+	spi_select_slave(&ssd1306_master, &ssd1306_slave, false);
+}
diff --git a/common2/components/display/ssd1306/ssd1306.h b/common2/components/display/ssd1306/ssd1306.h
new file mode 100644
index 00000000..48005a55
--- /dev/null
+++ b/common2/components/display/ssd1306/ssd1306.h
@@ -0,0 +1,340 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 OLED display controller driver.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef SSD1306_H_INCLUDED
+#define SSD1306_H_INCLUDED
+
+#include <compiler.h>
+#include <port.h>
+#include <spi.h>
+#include <delay.h>
+
+// controller and OLED configuration file
+#include "conf_ssd1306.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup ssd1306_oled_controller_group SSD1306 OLED Controller Low-level\
+ * driver
+ *
+ * This is a low level driver for the SSD1306 OLED controller through 4-wire SPI.
+ * It provides basic functions for initializing and writing to the OLED
+ * controller. In addition to hardware control and use of the OLED controller
+ * internal functions.
+ *
+ * Before writing data to the display call \ref ssd1306_init() which will set up
+ * the physical interface and the OLED. A file named \ref conf_ssd1306.h is needed
+ * to define which interface to use. For more information see the Interface
+ * selection section. In addition one also need to define the pins
+ * \ref SSD1306_DC_PIN, \ref SSD1306_CS_PIN and \ref SSD1306_RES_PIN and the
+ * display \ref SSD1306_CLOCK_SPEED.
+ *
+ * \warning This driver is not reentrant and can not be used in interrupt\
+ * service routines without extra care.
+ *
+ *
+ * An example \ref conf_ssd1306.h file could look like
+ * \code
+	 // interface selection
+	 #define SSD1306_SPI           SERCOM2
+
+	 #define SSD1306_CLOCK_SPEED          1000000
+
+	 #define SSD1306_DC_PIN               PIN_PB24
+	 #define SSD1306_CS_PIN               PIN_PB27
+	 #define SSD1306_RES_PIN              PIN_PA17
+\endcode
+ *
+ * \section dependencies Dependencies
+ * This driver depends on the following modules:
+ * - \ref asfdoc_sam0_port_group for IO port control.
+ * - \ref asfdoc_sam0_system_group for getting system clock speeds for init functions.
+ * - \ref asfdoc_sam0_sercom_spi_group for communication with the OLED controller
+ * - \ref asfdoc_sam0_sercom_spi_group for communication with the OLED controller
+ * @{
+ */
+
+//! \name Fundamental Command defines
+//@{
+#define SSD1306_CMD_COL_ADD_SET_LSB(column)         (0x00 | (column))
+#define SSD1306_CMD_COL_ADD_SET_MSB(column)         (0x10 | (column))
+#define SSD1306_CMD_SET_MEMORY_ADDRESSING_MODE      0x20
+#define SSD1306_CMD_SET_COLUMN_ADDRESS              0x21
+#define SSD1306_CMD_SET_PAGE_ADDRESS                0x22
+#define SSD1306_CMD_SET_DISPLAY_START_LINE(line)    (0x40 | (line))
+#define SSD1306_CMD_SET_CONTRAST_CONTROL_FOR_BANK0  0x81
+#define SSD1306_CMD_SET_CHARGE_PUMP_SETTING         0x8D
+#define SSD1306_CMD_SET_SEGMENT_RE_MAP_COL0_SEG0    0xA0
+#define SSD1306_CMD_SET_SEGMENT_RE_MAP_COL127_SEG0  0xA1
+#define SSD1306_CMD_ENTIRE_DISPLAY_AND_GDDRAM_ON    0xA4
+#define SSD1306_CMD_ENTIRE_DISPLAY_ON               0xA5
+#define SSD1306_CMD_SET_NORMAL_DISPLAY              0xA6
+#define SSD1306_CMD_SET_INVERSE_DISPLAY             0xA7
+#define SSD1306_CMD_SET_MULTIPLEX_RATIO             0xA8
+#define SSD1306_CMD_SET_DISPLAY_ON                  0xAF
+#define SSD1306_CMD_SET_DISPLAY_OFF                 0xAE
+#define SSD1306_CMD_SET_PAGE_START_ADDRESS(page)    (0xB0 | (page))
+#define SSD1306_CMD_SET_COM_OUTPUT_SCAN_UP          0xC0
+#define SSD1306_CMD_SET_COM_OUTPUT_SCAN_DOWN        0xC8
+#define SSD1306_CMD_SET_DISPLAY_OFFSET              0xD3
+#define SSD1306_CMD_SET_DISPLAY_CLOCK_DIVIDE_RATIO  0xD5
+#define SSD1306_CMD_SET_PRE_CHARGE_PERIOD           0xD9
+#define SSD1306_CMD_SET_COM_PINS                    0xDA
+#define SSD1306_CMD_SET_VCOMH_DESELECT_LEVEL        0xDB
+#define SSD1306_CMD_NOP                             0xE3
+//@}
+//! \name Graphic Acceleration Command defines
+//@{
+#define SSD1306_CMD_SCROLL_H_RIGHT                  0x26
+#define SSD1306_CMD_SCROLL_H_LEFT                   0x27
+#define SSD1306_CMD_CONTINUOUS_SCROLL_V_AND_H_RIGHT 0x29
+#define SSD1306_CMD_CONTINUOUS_SCROLL_V_AND_H_LEFT  0x2A
+#define SSD1306_CMD_DEACTIVATE_SCROLL               0x2E
+#define SSD1306_CMD_ACTIVATE_SCROLL                 0x2F
+#define SSD1306_CMD_SET_VERTICAL_SCROLL_AREA        0xA3
+//@}
+
+/**
+ * \name Interface selection
+ *
+ * The OLED controller support both serial and parallel mode, that means there
+ * is a number of possible ways of interfacing the controller using different
+ * SAM peripherals. The different interfaces can be selected using different
+ * defines. This driver supports the serial communication mode using an
+ * SPI Master.
+ *
+ * \note The current driver only support serial mode.
+ */
+/** @{@} */
+
+extern struct spi_module ssd1306_master;
+extern struct spi_slave_inst ssd1306_slave;
+
+//! \name OLED controller write and read functions
+//@{
+void ssd1306_write_command(uint8_t command);
+
+void ssd1306_write_data(uint8_t data);
+
+/**
+ * \brief Read data from the controller
+ *
+ * \note The controller does not support read in serial mode.
+ *
+ * \retval 8 bit data read from the controller
+ */
+static inline uint8_t ssd1306_read_data(void)
+{
+	return 0;
+}
+
+/**
+ * \brief Read status from the controller
+ *
+ * \note The controller does not support read in serial mode.
+ *
+ * \retval 8 bit status read from the controller
+ */
+static inline uint8_t ssd1306_get_status(void)
+{
+	return 0;
+}
+//@}
+
+//! \name OLED Controller reset
+//@{
+
+/**
+ * \brief Perform a hard reset of the OLED controller
+ *
+ * This functions will reset the OLED controller by setting the reset pin low.
+ */
+static inline void ssd1306_hard_reset(void)
+{
+	uint32_t delay_10us = 10 * (system_gclk_gen_get_hz(0)/1000000);
+	port_pin_set_output_level(SSD1306_RES_PIN, false);
+	delay_cycles(delay_10us); // At lest 10us
+	port_pin_set_output_level(SSD1306_RES_PIN, true);
+	delay_cycles(delay_10us); // At lest 10us
+}
+//@}
+
+//! \name Sleep control
+//@{
+/**
+ * \brief Enable the OLED sleep mode
+ */
+static inline void ssd1306_sleep_enable(void)
+{
+	ssd1306_write_command(SSD1306_CMD_SET_DISPLAY_OFF);
+}
+
+/**
+ * \brief Disable the OLED sleep mode
+ */
+static inline void ssd1306_sleep_disable(void)
+{
+	ssd1306_write_command(SSD1306_CMD_SET_DISPLAY_ON);
+}
+//@}
+
+//! \name Address setup for the OLED
+//@{
+/**
+ * \brief Set current page in display RAM
+ *
+ * This command is usually followed by the configuration of the column address
+ * because this scheme will provide access to all locations in the display
+ * RAM.
+ *
+ * \param address the page address
+ */
+static inline void ssd1306_set_page_address(uint8_t address)
+{
+	// Make sure that the address is 4 bits (only 8 pages)
+	address &= 0x0F;
+	ssd1306_write_command(SSD1306_CMD_SET_PAGE_START_ADDRESS(address));
+}
+
+/**
+ * \brief Set current column in display RAM
+ *
+ * \param address the column address
+ */
+static inline void ssd1306_set_column_address(uint8_t address)
+{
+	// Make sure the address is 7 bits
+	address &= 0x7F;
+	ssd1306_write_command(SSD1306_CMD_COL_ADD_SET_MSB(address >> 4));
+	ssd1306_write_command(SSD1306_CMD_COL_ADD_SET_LSB(address & 0x0F));
+}
+
+/**
+ * \brief Set the display start draw line address
+ *
+ * This function will set which line should be the start draw line for the OLED.
+ */
+static inline void ssd1306_set_display_start_line_address(uint8_t address)
+{
+	// Make sure address is 6 bits
+	address &= 0x3F;
+	ssd1306_write_command(SSD1306_CMD_SET_DISPLAY_START_LINE(address));
+}
+//@}
+
+//! \name Display hardware control
+//@{
+/**
+ * \brief Turn the OLED display on
+ *
+ * This function will turn on the OLED.
+ */
+static inline void ssd1306_display_on(void)
+{
+	ssd1306_write_command(SSD1306_CMD_SET_DISPLAY_ON);
+}
+
+/**
+ * \brief Turn the OLED display off
+ *
+ * This function will turn off the OLED.
+ */
+static inline void ssd1306_display_off(void)
+{
+	ssd1306_write_command(SSD1306_CMD_SET_DISPLAY_OFF);
+}
+
+/**
+ * \brief Set the OLED contrast level
+ *
+ * \param contrast a number between 0 and 0xFF
+ *
+ * \retval contrast the contrast value written to the OLED controller
+ */
+static inline uint8_t ssd1306_set_contrast(uint8_t contrast)
+{
+	ssd1306_write_command(SSD1306_CMD_SET_CONTRAST_CONTROL_FOR_BANK0);
+	ssd1306_write_command(contrast);
+	return contrast;
+}
+
+/**
+ * \brief Invert all pixels on the device
+ *
+ * This function will invert all pixels on the OLED
+ *
+ */
+static inline void ssd1306_display_invert_enable(void)
+{
+	ssd1306_write_command(SSD1306_CMD_SET_INVERSE_DISPLAY);
+}
+
+/**
+ * \brief Disable invert of all pixels on the device
+ *
+ * This function will disable invert on all pixels on the OLED
+ *
+ */
+static inline void ssd1306_display_invert_disable(void)
+{
+	ssd1306_write_command(SSD1306_CMD_SET_NORMAL_DISPLAY);
+}
+//@}
+
+//! \name Initialization
+//@{
+void ssd1306_init(void);
+//@}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SSD1306_H_INCLUDED */
diff --git a/common2/components/memory/data_flash/at45dbx/at45dbx.c b/common2/components/memory/data_flash/at45dbx/at45dbx.c
new file mode 100644
index 00000000..d742087e
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/at45dbx.c
@@ -0,0 +1,578 @@
+/**
+ * \file
+ *
+ * \brief Management of the AT45DBX data flash driver through SPI.
+ * This file manages the accesses to the AT45DBX data flash components.
+ *
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+//_____  I N C L U D E S ___________________________________________________
+
+
+#include "compiler.h"
+#include "at45dbx.h"
+#include "at45dbx_hal_spi.h"
+
+
+#if AT45DBX_MEM_CNT > 4
+	#error AT45DBX_MEM_CNT must not exceed 4
+#endif
+
+
+//_____ D E F I N I T I O N S ______________________________________________
+
+/*! \name AT45DBX Group A Commands
+ */
+//! @{
+#define AT45DBX_CMDA_RD_PAGE              0xD2        //!< Main Memory Page Read (Serial/8-bit Mode).
+#define AT45DBX_CMDA_RD_ARRAY_LEG         0xE8        //!< Continuous Array Read, Legacy Command (Serial/8-bit Mode).
+#define AT45DBX_CMDA_RD_ARRAY_LF_SM       0x03        //!< Continuous Array Read, Low-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDA_RD_ARRAY_AF_SM       0x0B        //!< Continuous Array Read, Any-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDA_RD_SECTOR_PROT_REG   0x32        //!< Read Sector Protection Register (Serial/8-bit Mode).
+#define AT45DBX_CMDA_RD_SECTOR_LKDN_REG   0x35        //!< Read Sector Lockdown Register (Serial/8-bit Mode).
+#define AT45DBX_CMDA_RD_SECURITY_REG      0x77        //!< Read Security Register (Serial/8-bit Mode).
+//! @}
+
+/*! \name AT45DBX Group B Commands
+ */
+//! @{
+#define AT45DBX_CMDB_ER_PAGE              0x81        //!< Page Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_ER_BLOCK             0x50        //!< Block Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_ER_SECTOR            0x7C        //!< Sector Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_ER_CHIP              0xC794809A  //!< Chip Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_XFR_PAGE_TO_BUF1     0x53        //!< Main Memory Page to Buffer 1 Transfer (Serial/8-bit Mode).
+#define AT45DBX_CMDB_XFR_PAGE_TO_BUF2     0x55        //!< Main Memory Page to Buffer 2 Transfer (Serial/8-bit Mode).
+#define AT45DBX_CMDB_CMP_PAGE_TO_BUF1     0x60        //!< Main Memory Page to Buffer 1 Compare (Serial/8-bit Mode).
+#define AT45DBX_CMDB_CMP_PAGE_TO_BUF2     0x61        //!< Main Memory Page to Buffer 2 Compare (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_BUF1_TO_PAGE_ER   0x83        //!< Buffer 1 to Main Memory Page Program with Built-in Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_BUF2_TO_PAGE_ER   0x86        //!< Buffer 2 to Main Memory Page Program with Built-in Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_BUF1_TO_PAGE      0x88        //!< Buffer 1 to Main Memory Page Program without Built-in Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_BUF2_TO_PAGE      0x89        //!< Buffer 2 to Main Memory Page Program without Built-in Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_PAGE_TH_BUF1      0x82        //!< Main Memory Page Program through Buffer 1 (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_PAGE_TH_BUF2      0x85        //!< Main Memory Page Program through Buffer 2 (Serial/8-bit Mode).
+#define AT45DBX_CMDB_RWR_PAGE_TH_BUF1     0x58        //!< Auto Page Rewrite through Buffer 1 (Serial/8-bit Mode).
+#define AT45DBX_CMDB_RWR_PAGE_TH_BUF2     0x59        //!< Auto Page Rewrite through Buffer 2 (Serial/8-bit Mode).
+//! @}
+
+/*! \name AT45DBX Group C Commands
+ */
+//! @{
+#define AT45DBX_CMDC_RD_BUF1_LF_SM        0xD1        //!< Buffer 1 Read, Low-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDC_RD_BUF2_LF_SM        0xD3        //!< Buffer 2 Read, Low-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDC_RD_BUF1_AF_SM        0xD4        //!< Buffer 1 Read, Any-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDC_RD_BUF2_AF_SM        0xD6        //!< Buffer 2 Read, Any-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDC_RD_BUF1_AF_8M        0x54        //!< Buffer 1 Read, Any-Frequency Mode (8-bit Mode).
+#define AT45DBX_CMDC_RD_BUF2_AF_8M        0x56        //!< Buffer 2 Read, Any-Frequency Mode (8-bit Mode).
+#define AT45DBX_CMDC_WR_BUF1              0x84        //!< Buffer 1 Write (Serial/8-bit Mode).
+#define AT45DBX_CMDC_WR_BUF2              0x87        //!< Buffer 2 Write (Serial/8-bit Mode).
+#define AT45DBX_CMDC_RD_STATUS_REG        0xD7        //!< Status Register Read (Serial/8-bit Mode).
+#define AT45DBX_CMDC_RD_MNFCT_DEV_ID_SM   0x9F        //!< Manufacturer and Device ID Read (Serial Mode).
+//! @}
+
+/*! \name AT45DBX Group D Commands
+ */
+//! @{
+#define AT45DBX_CMDD_EN_SECTOR_PROT       0x3D2A7FA9  //!< Enable Sector Protection (Serial/8-bit Mode).
+#define AT45DBX_CMDD_DIS_SECTOR_PROT      0x3D2A7F9A  //!< Disable Sector Protection (Serial/8-bit Mode).
+#define AT45DBX_CMDD_ER_SECTOR_PROT_REG   0x3D2A7FCF  //!< Erase Sector Protection Register (Serial/8-bit Mode).
+#define AT45DBX_CMDD_PR_SECTOR_PROT_REG   0x3D2A7FFC  //!< Program Sector Protection Register (Serial/8-bit Mode).
+#define AT45DBX_CMDD_LKDN_SECTOR          0x3D2A7F30  //!< Sector Lockdown (Serial/8-bit Mode).
+#define AT45DBX_CMDD_PR_SECURITY_REG      0x9B000000  //!< Program Security Register (Serial/8-bit Mode).
+#define AT45DBX_CMDD_PR_CONF_REG          0x3D2A80A6  //!< Program Configuration Register (Serial/8-bit Mode).
+#define AT45DBX_CMDD_DEEP_PWR_DN          0xB9        //!< Deep Power-down (Serial/8-bit Mode).
+#define AT45DBX_CMDD_RSM_DEEP_PWR_DN      0xAB        //!< Resume from Deep Power-down (Serial/8-bit Mode).
+//! @}
+
+
+/*! \name Bit-Masks and Values for the Status Register
+ */
+//! @{
+#define AT45DBX_MSK_BUSY                  0x80        //!< Busy status bit-mask.
+#define AT45DBX_BUSY                      0x00        //!< Busy status value (0x00 when busy, 0x80 when ready).
+#define AT45DBX_MSK_DENSITY               0x3C        //!< Device density bit-mask.
+//! @}
+
+#if AT45DBX_MEM_SIZE==AT45DBX_500KB
+/*! \name AT45DB041 Memories
+ */
+//! @{
+#define AT45DBX_DENSITY                   0x1C        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS            9           //!< Address bits for byte position within buffer.
+//! @}
+
+#elif AT45DBX_MEM_SIZE == AT45DBX_2MB
+
+/*! \name AT45DB161 Memories
+ */
+//! @{
+#define AT45DBX_DENSITY                   0x2C        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS            10          //!< Address bits for byte position within buffer.
+//! @}
+
+#elif AT45DBX_MEM_SIZE == AT45DBX_4MB
+
+/*! \name AT45DB321 Memories
+ */
+//! @{
+#define AT45DBX_DENSITY                   0x34        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS            10          //!< Address bits for byte position within buffer.
+//! @}
+
+#elif AT45DBX_MEM_SIZE == AT45DBX_8MB
+
+/*! \name AT45DB642 Memories
+ */
+//! @{
+#define AT45DBX_DENSITY                   0x3C        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS            11          //!< Address bits for byte position within buffer.
+//! @}
+
+#else
+	#error AT45DBX_MEM_SIZE is not defined to a supported value
+#endif
+
+//! Address bits for page selection.
+#define AT45DBX_PAGE_ADDR_BITS            (AT45DBX_MEM_SIZE - AT45DBX_PAGE_BITS)
+
+//! Number of bits for addresses within pages.
+#define AT45DBX_PAGE_BITS                 (AT45DBX_BYTE_ADDR_BITS - 1)
+
+//! Page size in bytes.
+#define AT45DBX_PAGE_SIZE                 (1 << AT45DBX_PAGE_BITS)
+
+//! Bit-mask for byte position within buffer in \ref at45dbx_gl_ptr_mem.
+#define AT45DBX_MSK_PTR_BYTE              ((1 << AT45DBX_PAGE_BITS) - 1)
+
+//! Bit-mask for page selection in \ref at45dbx_gl_ptr_mem.
+#define AT45DBX_MSK_PTR_PAGE              (((1 << AT45DBX_PAGE_ADDR_BITS) - 1) << AT45DBX_PAGE_BITS)
+
+//! Bit-mask for byte position within sector in \ref at45dbx_gl_ptr_mem.
+#define AT45DBX_MSK_PTR_SECTOR            ((1 << AT45DBX_SECTOR_BITS) - 1)
+
+//! Boolean indicating whether memory is in busy state.
+static bool at45dbx_busy;
+
+//! Memory data pointer.
+static uint32_t at45dbx_gl_ptr_mem;
+
+/*! \name Control Functions
+ */
+//! @{
+bool at45dbx_init(void)
+{
+	at45dbx_spi_init();
+	// Memory ready by default.
+	at45dbx_busy = false;
+	return true;
+}
+
+
+/*! \brief Selects or unselects a DF memory.
+ *
+ * \param memidx  Memory ID of DF to select or unselect.
+ * \param bSelect Boolean indicating whether the DF memory has to be selected.
+ */
+static void at45dbx_chipselect_df(uint8_t memidx, bool bSelect)
+{
+	if (bSelect) {
+		// Select SPI chip.
+		at45dbx_spi_select_device(memidx);
+	}
+	else {
+	 // Unselect SPI chip.
+	 	at45dbx_spi_deselect_device(memidx);
+	}
+}
+
+
+bool at45dbx_mem_check(void)
+{
+	uint8_t df;
+	uint8_t status = 0;
+
+	// DF memory check.
+	for (df = 0; df < AT45DBX_MEM_CNT; df++) {
+		// Select the DF memory to check.
+		at45dbx_chipselect_df(df, true);
+		// Send the Status Register Read command.
+		at45dbx_spi_write_byte(AT45DBX_CMDC_RD_STATUS_REG);
+		// Send a dummy byte to read the status register.
+			at45dbx_spi_read_byte(&status);
+		// Unselect the checked DF memory.
+		at45dbx_chipselect_df(df, false);
+		// Unexpected device density value.
+		if ((status & AT45DBX_MSK_DENSITY) < AT45DBX_DENSITY) {
+			return false;
+		}
+	}
+	return true;
+}
+
+
+static void at45dbx_wait_ready(void)
+{
+	uint8_t status;
+
+	// Select the DF memory at45dbx_gl_ptr_mem points to.
+	at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, true);
+
+	// Send the Status Register Read command.
+	at45dbx_spi_write_byte(AT45DBX_CMDC_RD_STATUS_REG);
+	// Read the status register until the DF is ready.
+	do {
+		// Send a dummy byte to read the status register.
+		at45dbx_spi_read_byte(&status);
+	} while ((status & AT45DBX_MSK_BUSY) == AT45DBX_BUSY);
+
+	// Unselect the DF memory at45dbx_gl_ptr_mem points to.
+	at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, false);
+}
+
+bool at45dbx_read_sector_open(uint32_t sector)
+{
+	if (at45dbx_check_address(sector << AT45DBX_SECTOR_BITS) == false) {
+		return false;
+	} else {
+		return at45dbx_read_byte_open(sector << AT45DBX_SECTOR_BITS);
+	}	
+}
+
+bool at45dbx_read_byte_open(uint32_t ad)
+{
+	uint32_t addr;
+	
+	if (at45dbx_check_address(ad) == false) {
+		return false;
+	}
+
+	// Set the global memory pointer to a byte address.
+	at45dbx_gl_ptr_mem = ad;
+
+	// If the DF memory is busy, wait until it's ready.
+	if (at45dbx_busy) {
+		at45dbx_wait_ready();
+	}
+	at45dbx_busy = false;
+
+	// Select the DF memory at45dbx_gl_ptr_mem points to.
+	at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, true);
+
+	// Initiate a page read at a given sector.
+
+	// Send the Main Memory Page Read command.
+	at45dbx_spi_write_byte(AT45DBX_CMDA_RD_PAGE);
+
+	// Send the three address bytes, which comprise:
+	//  - (24 - (AT45DBX_PAGE_ADDR_BITS + AT45DBX_BYTE_ADDR_BITS)) reserved bits;
+	//  - then AT45DBX_PAGE_ADDR_BITS bits specifying the page in main memory to be read;
+	//  - then AT45DBX_BYTE_ADDR_BITS bits specifying the starting byte address within that page.
+	// NOTE: The bits of at45dbx_gl_ptr_mem above the AT45DBX_MEM_SIZE bits are useless for the local
+	// DF addressing. They are used for DF discrimination when there are several DFs.
+	addr = (Rd_bitfield(at45dbx_gl_ptr_mem, (uint32_t)AT45DBX_MSK_PTR_PAGE) << AT45DBX_BYTE_ADDR_BITS) |
+		Rd_bitfield(at45dbx_gl_ptr_mem, AT45DBX_MSK_PTR_BYTE);
+
+	at45dbx_spi_write_byte(LSB2W(addr));
+	at45dbx_spi_write_byte(LSB1W(addr));
+	at45dbx_spi_write_byte(LSB0W(addr));
+
+	// Send 32 don't care clock cycles to initialize the read operation.
+	at45dbx_spi_write_byte(0x55);
+	at45dbx_spi_write_byte(0x55);
+	at45dbx_spi_write_byte(0x55);
+	at45dbx_spi_write_byte(0x55);
+	return true;
+}
+
+
+void at45dbx_read_close(void)
+{
+	// Unselect the DF memory at45dbx_gl_ptr_mem points to.
+	at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, false);
+	// Memory ready.
+	at45dbx_busy = false;
+}
+
+bool at45dbx_write_sector_open(uint32_t sector)
+{
+	if (at45dbx_check_address(sector << AT45DBX_SECTOR_BITS) == false) {
+		return false;
+	} else {
+		// Set the global memory pointer to a byte address.
+		return at45dbx_write_byte_open(sector << AT45DBX_SECTOR_BITS);
+	}
+}
+
+bool at45dbx_write_byte_open(uint32_t ad)
+{
+	volatile uint32_t addr;
+	
+	if (at45dbx_check_address(ad) == false) {
+		return false;
+	}
+	
+	at45dbx_gl_ptr_mem = ad;
+
+	// If the DF memory is busy, wait until it's ready.
+	if (at45dbx_busy) {
+		at45dbx_wait_ready();
+	}
+	at45dbx_busy = false;
+
+#if AT45DBX_PAGE_SIZE > AT45DBX_SECTOR_SIZE
+	// Select the DF memory at45dbx_gl_ptr_mem points to.
+	at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, true);
+
+	// Transfer the content of the current page to buffer 1.
+
+	// Send the Main Memory Page to Buffer 1 Transfer command.
+	at45dbx_spi_write_byte(AT45DBX_CMDB_XFR_PAGE_TO_BUF1);
+
+	// Send the three address bytes, including:
+	//  - (24 - (AT45DBX_PAGE_ADDR_BITS + AT45DBX_BYTE_ADDR_BITS)) reserved bits;
+	//  - then AT45DBX_PAGE_ADDR_BITS bits specifying the page in main memory to be read;
+	//  - then AT45DBX_BYTE_ADDR_BITS don't care bits.
+	// NOTE: The bits of at45dbx_gl_ptr_mem above the AT45DBX_MEM_SIZE bits are useless for the local
+	// DF addressing. They are used for DF discrimination when there are several DFs.
+	addr = Rd_bitfield(at45dbx_gl_ptr_mem, (uint32_t)AT45DBX_MSK_PTR_PAGE) << AT45DBX_BYTE_ADDR_BITS;
+	at45dbx_spi_write_byte(LSB2W(addr));
+	at45dbx_spi_write_byte(LSB1W(addr));
+	at45dbx_spi_write_byte(LSB0W(addr));
+
+	// Unselect the DF memory at45dbx_gl_ptr_mem points to.
+	at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, false);
+
+	// Wait for end of page transfer.
+	at45dbx_wait_ready();
+#endif
+
+	// Select the DF memory at45dbx_gl_ptr_mem points to.
+	at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, true);
+
+	// Initiate a page write at a given sector.
+
+	// Send the Main Memory Page Program through Buffer 1 command.
+	at45dbx_spi_write_byte(AT45DBX_CMDB_PR_PAGE_TH_BUF1);
+
+	// Send the three address bytes, which comprise:
+	//  - (24 - (AT45DBX_PAGE_ADDR_BITS + AT45DBX_BYTE_ADDR_BITS)) reserved bits;
+	//  - then AT45DBX_PAGE_ADDR_BITS bits specifying the page in main memory to be written;
+	//  - then AT45DBX_BYTE_ADDR_BITS bits specifying the starting byte address within that page.
+	// NOTE: The bits of at45dbx_gl_ptr_mem above the AT45DBX_MEM_SIZE bits are useless for the local
+	// DF addressing. They are used for DF discrimination when there are several DFs.
+	addr = ((uint32_t)(Rd_bitfield(at45dbx_gl_ptr_mem, (uint32_t)AT45DBX_MSK_PTR_PAGE)) << AT45DBX_BYTE_ADDR_BITS) |
+			Rd_bitfield(at45dbx_gl_ptr_mem, AT45DBX_MSK_PTR_BYTE);
+	at45dbx_spi_write_byte(LSB2W(addr));
+	at45dbx_spi_write_byte(LSB1W(addr));
+	at45dbx_spi_write_byte(LSB0W(addr));
+
+	return true;
+}
+
+
+void at45dbx_write_close(void)
+{
+	// While end of logical sector not reached, zero-fill remaining memory bytes.
+	while (Rd_bitfield(at45dbx_gl_ptr_mem, AT45DBX_MSK_PTR_SECTOR)) {
+		at45dbx_spi_write_byte(0x00);
+		at45dbx_gl_ptr_mem++;
+	}
+
+	// Unselect the DF memory at45dbx_gl_ptr_mem points to.
+	at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, false);
+
+	// Memory busy.
+	at45dbx_busy = true;
+}
+
+
+//! @}
+
+
+/*! \name Single-Byte Access Functions
+ */
+//! @{
+
+
+uint8_t at45dbx_read_byte(void)
+{
+	uint8_t data;
+
+	// Memory busy.
+	if (at45dbx_busy) {
+		// Being here, we know that we previously finished a page read.
+		// => We have to access the next page.
+
+		// Memory ready.
+		at45dbx_busy = false;
+
+	// Eventually select the next DF and open the next page.
+	// NOTE: at45dbx_read_open input parameter is a sector.
+		at45dbx_read_sector_open(at45dbx_gl_ptr_mem >> AT45DBX_SECTOR_BITS); // at45dbx_gl_ptr_mem / AT45DBX_SECTOR_SIZE.
+	}
+
+	at45dbx_spi_read_byte(&data);
+	at45dbx_gl_ptr_mem++;
+
+	// If end of page reached,
+	if (!Rd_bitfield(at45dbx_gl_ptr_mem, AT45DBX_MSK_PTR_BYTE)) {
+		// unselect the DF memory at45dbx_gl_ptr_mem points to.
+		at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, false);
+		// Memory busy.
+		at45dbx_busy = true;
+	}
+	return data;
+}
+
+
+bool at45dbx_write_byte(uint8_t b)
+{
+	// Memory busy.
+	if (at45dbx_busy) {
+		// Being here, we know that we previously launched a page programming.
+		// => We have to access the next page.
+		// Eventually select the next DF and open the next page.
+	// NOTE: at45dbx_write_open input parameter is a sector.
+		at45dbx_write_byte_open(at45dbx_gl_ptr_mem);
+	}
+
+	// Write the next data byte.
+	at45dbx_spi_write_byte(b);
+	at45dbx_gl_ptr_mem++;
+
+	// If end of page reached,
+	if (!Rd_bitfield(at45dbx_gl_ptr_mem, AT45DBX_MSK_PTR_BYTE)) {
+		// unselect the DF memory at45dbx_gl_ptr_mem points to in order to program the page.
+		at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, false);
+		// Memory busy.
+		at45dbx_busy = true;
+	}
+	return true;
+}
+
+
+//! @}
+
+
+/*! \name Single-Sector Access Functions
+ */
+
+//! @{
+bool at45dbx_read_sector_to_ram(void *ram)
+{
+	uint32_t end_addr=at45dbx_gl_ptr_mem+AT45DBX_SECTOR_SIZE;
+
+	if (at45dbx_busy) {
+		// Being here, we know that we previously finished a page read.
+		// => We have to access the next page.
+		at45dbx_busy = false;
+		// Eventually select the next DF and open the next page.
+		at45dbx_read_byte_open(at45dbx_gl_ptr_mem);
+	}
+
+	while(at45dbx_gl_ptr_mem<end_addr) {
+#if (AT45DBX_PAGE_SIZE<AT45DBX_SECTOR_SIZE)
+		at45dbx_spi_read_packet(ram,AT45DBX_PAGE_SIZE);
+		at45dbx_gl_ptr_mem+=AT45DBX_PAGE_SIZE;
+		ram=(void*)((uint8_t*)ram+(uint32_t)AT45DBX_PAGE_SIZE);
+		at45dbx_read_close();
+		at45dbx_read_byte_open(at45dbx_gl_ptr_mem);
+#else
+		at45dbx_spi_read_packet(ram,AT45DBX_SECTOR_SIZE);
+		at45dbx_gl_ptr_mem+=AT45DBX_SECTOR_SIZE;
+		 // If end of page reached,
+		if (!Rd_bitfield(at45dbx_gl_ptr_mem, AT45DBX_MSK_PTR_BYTE)) {
+			at45dbx_read_close();
+			at45dbx_read_byte_open(at45dbx_gl_ptr_mem);
+		}
+
+#endif
+	}
+	return true;
+}
+
+
+bool at45dbx_write_sector_from_ram(const void *ram)
+{
+	uint32_t end_addr=at45dbx_gl_ptr_mem+AT45DBX_SECTOR_SIZE;
+	// Memory busy.
+	if (at45dbx_busy) {
+		//Being here, we know that we previously launched a page programming.
+		//=> We have to access the next page.
+
+		//Eventually select the next DF and open the next page.
+		// NOTE: at45dbx_write_open input parameter is a sector.
+		at45dbx_write_byte_open(at45dbx_gl_ptr_mem); // at45dbx_gl_ptr_mem / AT45DBX_SECTOR_SIZE.
+	}
+	while(at45dbx_gl_ptr_mem<end_addr) {
+#if (AT45DBX_PAGE_SIZE<AT45DBX_SECTOR_SIZE)
+		at45dbx_spi_write_packet(ram,AT45DBX_PAGE_SIZE);
+		at45dbx_gl_ptr_mem+=AT45DBX_PAGE_SIZE;
+		ram=(void*)((uint8_t*)ram+(uint32_t)AT45DBX_PAGE_SIZE);
+		 // If end of page reached,
+		if (!Rd_bitfield(at45dbx_gl_ptr_mem, AT45DBX_MSK_PTR_BYTE)) {
+			// unselect the DF memory at45dbx_gl_ptr_mem points to in order to program the page.
+			at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, false);
+			// Memory busy.
+			at45dbx_busy = true;
+		}
+		if(at45dbx_gl_ptr_mem<end_addr) {
+			at45dbx_write_byte_open(at45dbx_gl_ptr_mem);
+		}
+#else
+		at45dbx_spi_write_packet(ram,AT45DBX_SECTOR_SIZE);
+		at45dbx_gl_ptr_mem+=AT45DBX_SECTOR_SIZE;
+		ram=(void*)((uint8_t*)ram+(uint32_t)AT45DBX_SECTOR_SIZE);
+		 // If end of page reached,
+		if (!Rd_bitfield(at45dbx_gl_ptr_mem, AT45DBX_MSK_PTR_BYTE)) {
+			// unselect the DF memory at45dbx_gl_ptr_mem points to in order to program the page.
+			at45dbx_chipselect_df(at45dbx_gl_ptr_mem >> AT45DBX_MEM_SIZE, false);
+			// Memory busy.
+			at45dbx_busy = true;
+		}
+
+#endif
+	}
+	return true;
+}
+//! @}
diff --git a/common2/components/memory/data_flash/at45dbx/at45dbx.h b/common2/components/memory/data_flash/at45dbx/at45dbx.h
new file mode 100644
index 00000000..e480f7de
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/at45dbx.h
@@ -0,0 +1,272 @@
+/**
+ * \file
+ *
+ * \brief Management of the AT45DBX DataFlash component.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef _AT45DBX_H_
+#define _AT45DBX_H_
+
+#include "conf_at45dbx.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup at45dbx_group AT45dbx DataFlash component driver.
+ *
+ * This is a driver for the AT45dbX series DataFlash memories.
+ * It provides functions for initialization, read and write operations at
+ * byte or sector level.
+ *
+ * \section dependencies Dependencies
+ * This driver depends on the following modules:
+ * - \ref asfdoc_samd20_sercom_spi_group for SPI interface.
+ *
+ * @{
+ */
+//_____ D E F I N I T I O N S ______________________________________________
+
+/*! \name Available AT45DBX Sizes
+ *
+ * Number of address bits of available AT45DBX data flash memories.
+ *
+ * \note All memories from page sizes of 256 bytes to 1024 bytes are
+ *       supported.
+ */
+//! @{
+#define AT45DBX_500KB           19
+#define AT45DBX_1MB             20
+#define AT45DBX_2MB             21
+#define AT45DBX_4MB             22
+#define AT45DBX_8MB             23
+//! @}
+
+//! Number of bits for addresses within sectors.
+#define AT45DBX_SECTOR_BITS     9
+
+//! Sector size in bytes.
+#define AT45DBX_SECTOR_SIZE     (1 << AT45DBX_SECTOR_BITS)
+
+
+//_____ D E C L A R A T I O N S ____________________________________________
+
+/*! \name Control Functions
+ */
+//! @{
+
+/*! \brief Initializes the data flash controller and the SPI channel by which
+ *         the DF is controlled.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ */
+extern bool at45dbx_init(void);
+
+/*! \brief Performs a memory check on all DataFlash memories.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ */
+extern bool at45dbx_mem_check(void);
+
+/*! \brief Opens a DataFlash memory in read mode at a given sector.
+ *
+ * \param sector  Start sector.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ *
+ * \note Sector may be page-unaligned (depending on the DataFlash page size).
+ */
+extern bool at45dbx_read_sector_open(uint32_t sector);
+
+/*! \brief Opens a DataFlash memory in read mode at a given byte address.
+ *
+ * \param ad  Start address.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ */
+extern bool at45dbx_read_byte_open(uint32_t ad);
+
+
+/*! \brief Unselects the current DataFlash memory.
+ */
+extern void at45dbx_read_close(void);
+
+/*! \brief This function opens a DataFlash memory in write mode at a given sector.
+ *
+ * \param sector  Start sector.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ *
+ * \note Sector may be page-unaligned (depending on the DF page size).
+ *
+ * \note If \ref AT45DBX_PAGE_SIZE > \ref AT45DBX_SECTOR_SIZE, page content is
+ *       first loaded in buffer to then be partially updated by write byte or
+ *       write sector functions.
+ */
+extern bool at45dbx_write_sector_open(uint32_t sector);
+
+/*! \brief This function opens a DataFlash memory in write mode at a given address.
+ *
+ * \param ad  Start address.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ *
+ */
+extern bool at45dbx_write_byte_open(uint32_t ad);
+
+/*! \brief Fills the end of the current logical sector and launches page programming.
+ */
+extern void at45dbx_write_close(void);
+
+//! @}
+
+
+/*! \name Single-Byte Access Functions
+ */
+//! @{
+
+/*! \brief Performs a single byte read from DataFlash memory.
+ *
+ * \return The read byte.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_read_byte_open
+ *       function.
+ */
+extern uint8_t at45dbx_read_byte(void);
+
+/*! \brief Performs a single byte write to DataFlash memory.
+ *
+ * \param b The byte to write.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_write_byte_open
+ *       function.
+ */
+extern bool at45dbx_write_byte(uint8_t b);
+
+//! @}
+
+
+
+
+/*! \name Single-Sector Access Functions
+ */
+//! @{
+
+/*! \brief Reads one DataFlash sector to a RAM buffer.
+ *
+ * Data flow is: DataFlash -> RAM.
+ *
+ * \param ram Pointer to RAM buffer.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_read_sector_open
+ *       function.
+ */
+extern bool at45dbx_read_sector_to_ram(void *ram);
+
+/*! \brief Writes one DataFlash sector from a RAM buffer.
+ *
+ * Data flow is: RAM -> DataFlash.
+ *
+ * \param ram Pointer to RAM buffer.
+ *
+ * \retval true Success.
+ * \retval false Failure.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_write_sector_open
+ *       function.
+ */
+extern bool at45dbx_write_sector_from_ram(const void *ram);
+
+//! @}
+
+/*! \name Functions to connect the DataFlash driver with the SPI Multiple-Sector Access Functions
+ */
+//! @{
+extern void at45dbx_spi_init(void);
+extern void at45dbx_spi_select_device(uint8_t mem_id);
+extern void at45dbx_spi_deselect_device(uint8_t mem_id);
+extern void at45dbx_spi_write_byte(uint8_t data);
+extern void at45dbx_spi_read_byte(uint8_t *data);
+extern void at45dbx_spi_read_packet(void const *data, size_t len);
+extern void at45dbx_spi_write_packet(void const *data, size_t len);
+//! @}
+
+//! @}
+
+/**
+ * \internal
+ * \brief Check the address passed is valid.
+ *
+ * Driver-internal function for checking the DataFlash address is in memory
+ * range configuration.
+ *
+ * \param  address  The address to be checked
+ *
+ * \return true when the address is valid, false when out of memory range.
+ */
+static inline bool at45dbx_check_address(uint32_t address)
+{
+	if (address > (((uint32_t)1<<AT45DBX_MEM_SIZE)*AT45DBX_MEM_CNT)) {
+		return false;
+	} else {
+		return true;
+	}
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // _AT45DBX_H_
diff --git a/common2/components/memory/data_flash/at45dbx/at45dbx_hal_spi.h b/common2/components/memory/data_flash/at45dbx/at45dbx_hal_spi.h
new file mode 100644
index 00000000..8c6635c8
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/at45dbx_hal_spi.h
@@ -0,0 +1,221 @@
+/**
+ * \file
+ *
+ * \brief Connection of the AT45DBX DataFlash to SPI interface driver.
+ *
+ * This file manages the connection of the AT45dbx DataFlash driver to
+ * SPI driver. The SPI module selection on hardware depends on AT45DBX_SPI
+ * in conf_at45dbx.h
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _AT45DBX_HAL_SPI_H_
+#define _AT45DBX_HAL_SPI_H_
+
+#include "conf_at45dbx.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct spi_module at45dbx_master;
+struct spi_slave_inst at45dbx_slave;
+
+/*! \name Functions to connect the DataFlash driver with the SPI Multiple-Sector Access Functions
+ */
+//! @{
+
+#  include "spi.h"
+
+#define DUMMY          0xFF
+
+/* Create as many slave instances as required... */
+#define AT45DBX_CS0    AT45DBX_CS  // To keep compliance
+
+struct spi_slave_inst_config slave_configs[AT45DBX_MEM_CNT];
+
+uint8_t ss_pins[] = {
+# define AT45DBX_CS_ID(slot, unused) \
+		AT45DBX_CS##slot,
+		MREPEAT(AT45DBX_MEM_CNT, AT45DBX_CS_ID, ~)
+# undef AT45DBX_CS_ID
+};
+
+/*! \brief Initialize SPI external resource for AT45dbx DataFlash driver.
+ *
+ *  This function initializes the DataFlash component as well as the SPI service
+ *  the memory is connected to.
+ *  \pre The conf_at45dbx.h file should provide the following information
+ *  - AT45DBX_MEM_SIZE: The DataFlash type the driver is connected to.
+ *  - AT45DBX_MEM_CNT: The number of DataFlash components (number of chipselect)
+ *  - AT45DBX_SPI_MODULE:  The name of the SPI module used by the DataFlash driver
+ *  - AT45DBX_SPI_MASTER_SPEED: The SPI bus speed.
+ *  - AT45DBX_SPI_PINMUX_SETTING: The pin mux setting for SPI module
+ *  - AT45DBX_SPI_PINMUX_PAD0-3: The pad selection for SPI
+ *  - AT45DBX_CS: The chip select line
+ *  - AT45DBX_CLOCK_SPEED: The SPI baudrate used
+ */
+inline void at45dbx_spi_init(void)
+{
+	struct spi_config config;
+
+	spi_get_config_defaults(&config);
+
+	config.mux_setting = AT45DBX_SPI_PINMUX_SETTING;
+	config.pinmux_pad0 = AT45DBX_SPI_PINMUX_PAD0;
+	config.pinmux_pad1 = AT45DBX_SPI_PINMUX_PAD1;
+	config.pinmux_pad2 = AT45DBX_SPI_PINMUX_PAD2;
+	config.pinmux_pad3 = AT45DBX_SPI_PINMUX_PAD3;
+	config.mode_specific.master.baudrate = AT45DBX_CLOCK_SPEED;
+
+	spi_init(&at45dbx_master, AT45DBX_SPI, &config);
+	spi_enable(&at45dbx_master);
+}
+
+/*! \brief Select one external DataFlash component
+ *
+ * \param mem_id  The DataFlash index number.
+ */
+inline void at45dbx_spi_select_device(uint8_t mem_id)
+{
+	switch(mem_id) {
+#define AT45DBX_SELECT(slot, unused) \
+	case slot:\
+		spi_slave_inst_get_config_defaults(&slave_configs[slot]);\
+		slave_configs[slot].ss_pin = ss_pins[slot];\
+		spi_attach_slave(&at45dbx_slave, &slave_configs[slot]);\
+		spi_select_slave(&at45dbx_master, &at45dbx_slave, true);\
+		break;
+		MREPEAT(AT45DBX_MEM_CNT, AT45DBX_SELECT, ~)
+#undef AT45DBX_SELECT
+	default:
+		/* unhandled_case(id); */
+		return;
+	}
+}
+
+/*! \brief Unselect one external DataFlash component
+ *
+ * \param mem_id  The DataFlash index number.
+ */
+inline void at45dbx_spi_deselect_device(uint8_t mem_id)
+{
+	switch(mem_id) {
+#define AT45DBX_DESELECT(slot, unused) \
+	case slot:\
+		spi_select_slave(&at45dbx_master, &at45dbx_slave, false);\
+		break;
+		MREPEAT(AT45DBX_MEM_CNT, AT45DBX_DESELECT, ~)
+#undef AT45DBX_DESELECT
+	default:
+		/* unhandled_case(id); */
+		return;
+	}
+}
+
+/*! \brief Send one byte to the DataFlash.
+ *
+ * \param data The data byte to send.
+ * \pre The DataFlash should be selected first using at45dbx_spi_select_device
+ */
+void at45dbx_spi_write_byte(uint8_t data)
+{
+	uint16_t temp = 0;
+	while (!spi_is_ready_to_write(&at45dbx_master));
+	spi_write(&at45dbx_master,data);
+	while (!spi_is_ready_to_read(&at45dbx_master));
+	spi_read(&at45dbx_master,&temp);
+}
+
+/*! \brief Get one byte (read) from the DataFlash.
+ *
+ * \return The received byte.
+ * \pre The DataFlash should be selected first using at45dbx_spi_select_device
+ */
+void at45dbx_spi_read_byte(uint8_t *data)
+{
+	uint16_t temp = 0;
+
+	while (!spi_is_ready_to_write(&at45dbx_master));
+	spi_write(&at45dbx_master, DUMMY);
+	while (!spi_is_ready_to_read(&at45dbx_master));
+	spi_read(&at45dbx_master,&temp);
+
+	*data = (uint8_t)temp;
+}
+
+
+/**
+ * \brief Receive a sequence of bytes from a DataFlash
+ *
+ *
+ * \param data   data buffer to read
+ * \param len    Length of data
+ * \pre The DataFlash should be selected first using at45dbx_spi_select_device
+ */
+inline void at45dbx_spi_read_packet(void const *data, size_t len)
+{
+	spi_read_buffer_wait(&at45dbx_master, (uint8_t *)data, len,
+		(uint16_t)DUMMY);
+}
+
+/**
+ * \brief Send a sequence of bytes to a DataFlash from
+ *
+ *
+ * \param data   data buffer to write
+ * \param len    Length of data
+ * \pre The DataFlash should be selected first using at45dbx_spi_select_device
+ *
+ */
+inline void at45dbx_spi_write_packet(void const *data, size_t len)
+{
+	spi_write_buffer_wait(&at45dbx_master,(const uint8_t *)data, len);
+}
+
+//! @}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // _AT45DBX_HAL_SPI_H_
diff --git a/common2/components/memory/data_flash/at45dbx/doxygen/common2.components.memory.data_flash.at45dbx/doxyfile.doxygen b/common2/components/memory/data_flash/at45dbx/doxygen/common2.components.memory.data_flash.at45dbx/doxyfile.doxygen
new file mode 100644
index 00000000..03cf1b20
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/doxygen/common2.components.memory.data_flash.at45dbx/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "AT45DBX DataFlash"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../at45dbx.c ../../at45dbx.h ../../at45dbx_hal_spi.h ../../module_config/conf_at45dbx.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/data_flash/at45dbx/doxygen/common2.components.memory.data_flash.at45dbx/doxygen_module_mainpage.h b/common2/components/memory/data_flash/at45dbx/doxygen/common2.components.memory.data_flash.at45dbx/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/doxygen/common2.components.memory.data_flash.at45dbx/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/components/memory/data_flash/at45dbx/example/at45dbx_example.c b/common2/components/memory/data_flash/at45dbx/example/at45dbx_example.c
new file mode 100644
index 00000000..1a611033
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/example/at45dbx_example.c
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief AT45dbx DataFlash Component Example.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+
+/** \mainpage
+ * \section intro Introduction
+ * This example demonstrates how to use the Atmel DataFlash AT45DBx component.
+ * The DataFlash requires an SPI bus as a low level communication interface.
+ *
+ * \section files Main Files
+ * - at45dbx_example.c: AT45DBx memory example application.
+ * - at45dbx.c: The DataFlash driver
+ * - at45dbx.h: The DataFlash driver header
+ * - conf_board.h: board initialization process configuration
+ * - conf_clocks.h: clock specific initialization
+ * - conf_at45dbx.h: DataFlash driver configuration (including SPI service selection)
+ *
+ * \section apiinfo AT45DBX low level driver API
+ * The AT45DBX low level driver API can be found
+ * \ref at45dbx_group "here"
+ *
+ * \section deviceinfo Device Info
+ * All devices with SPI can be used. This example has been tested
+ * with the following setup:
+ *   - Evaluation kits with a DataFlash connected to an SPI interface.
+ *
+ * \section exampledescription Description of the example
+ *   - Send "Read Status" command to the dataflash.
+ *   - Read back the status of the dataflash.
+ *   - Write two sectors to the dataflash
+ *   - Read Back these sectors and check correct content
+ *   - If all operations are correct, \ref DATA_FLASH_LED_EXAMPLE_0 is 'on'
+ *     other led state means the DataFlash access fails somewhere.
+ *
+ *
+ * \section compinfo Compilation Info
+ * This software was written for the GNU GCC and IAR for ARM.
+ * Other compilers may or may not work.
+ *
+ * \section contactinfo Contact Information
+ * For further information, visit
+ * <A href="http://www.atmel.com/">Atmel</A>.\n
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#include "compiler.h"
+#include "preprocessor.h"
+#include "asf.h"
+#include "at45dbx.h"
+#include "conf_data_flash_example.h"
+
+// Dataflash target sector used in this example
+#define	TARGET_SECTOR 0x00002
+// RAM buffer used in this example
+uint8_t ram_buf[AT45DBX_SECTOR_SIZE];
+
+void test_ko(void);
+
+/*! \brief Main function.
+ */
+int main(void)
+{
+	uint16_t i;
+
+	// Initialize the system - clock and board.
+	system_init();
+	at45dbx_init();
+	if(at45dbx_mem_check()==true)	{
+		port_pin_set_output_level(DATA_FLASH_LED_EXAMPLE_0, false);
+	} else
+	{
+		test_ko();
+	}
+
+	// Prepare half a data flash sector to 0xAA
+	for(i=0;i<AT45DBX_SECTOR_SIZE/2;i++) {
+		ram_buf[i]=0xAA;
+	}
+	// And the remaining half to 0x55
+	for(;i<AT45DBX_SECTOR_SIZE;i++) {
+		ram_buf[i]=0x55;
+	}
+
+	at45dbx_write_sector_open(TARGET_SECTOR);
+	at45dbx_write_sector_from_ram(ram_buf);
+	at45dbx_write_close();
+
+	// Read back this sector and compare to expected values
+	at45dbx_read_sector_open(TARGET_SECTOR);
+	at45dbx_read_sector_to_ram(ram_buf);
+	at45dbx_read_close();
+	for(i=0;i<AT45DBX_SECTOR_SIZE/2;i++) {
+		if (ram_buf[i]!=0xAA) {
+			test_ko();
+		}
+	}
+	for(;i<AT45DBX_SECTOR_SIZE;i++) {
+		if (ram_buf[i]!=0x55) {
+			test_ko();
+		}
+	}
+
+	// Write one data flash sector to 0x00, 0x01 ....
+	for(i=0;i<AT45DBX_SECTOR_SIZE;i++) {
+		ram_buf[i]=i;
+	}
+	at45dbx_write_sector_open(TARGET_SECTOR);
+	at45dbx_write_sector_from_ram(ram_buf);
+	at45dbx_write_close();
+
+	// Read one data flash sector to ram
+	at45dbx_read_sector_open(TARGET_SECTOR);
+	at45dbx_read_sector_to_ram(ram_buf);
+	at45dbx_read_close();
+	for(i=0;i<AT45DBX_SECTOR_SIZE;i++) {
+		if ( ram_buf[i]!=(i%0x100) ) {
+			test_ko();
+		}
+	}
+
+	while (1);
+}
+
+void test_ko(void)
+{
+	port_pin_set_output_level(DATA_FLASH_LED_EXAMPLE_0, true);
+	while(1);
+}
diff --git a/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_at45dbx.h b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_at45dbx.h
new file mode 100644
index 00000000..36890be5
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_at45dbx.h
@@ -0,0 +1,74 @@
+/**
+ * \file
+ *
+ * \brief Example specific AT45DBX configuration file
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef _CONF_AT45DBX_H_
+#define _CONF_AT45DBX_H_
+
+#include "at45dbx.h"
+#include <board.h>
+
+//! Select the SPI module AT45DBX is connected to
+#define AT45DBX_SPI                 EXT2_SPI_MODULE
+
+//! Size of AT45DBX data flash memories to manage.
+#define AT45DBX_MEM_SIZE            AT45DBX_8MB
+
+//! Number of AT45DBX components to manage.
+#define AT45DBX_MEM_CNT             1
+
+#define AT45DBX_SPI_PINMUX_SETTING  EXT2_SPI_SERCOM_MUX_SETTING
+#define AT45DBX_SPI_PINMUX_PAD0     EXT2_SPI_SERCOM_PINMUX_PAD0
+#define AT45DBX_SPI_PINMUX_PAD1     EXT2_SPI_SERCOM_PINMUX_PAD1
+#define AT45DBX_SPI_PINMUX_PAD2     EXT2_SPI_SERCOM_PINMUX_PAD2
+#define AT45DBX_SPI_PINMUX_PAD3     EXT2_SPI_SERCOM_PINMUX_PAD3
+
+#define AT45DBX_CS                  EXT2_PIN_15
+
+//! SPI master speed in Hz.
+#define AT45DBX_CLOCK_SPEED         9600
+
+#endif  // _CONF_AT45DBX_H_
diff --git a/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_board.h b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..954ba82b
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_board.h
@@ -0,0 +1,51 @@
+/**
+ * \file
+ *
+ * \brief Board configuration for the AT45DBX example
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#include "samd20_xplained_pro.h"
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_clocks.h b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..47326488
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,172 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_data_flash_example.h b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_data_flash_example.h
new file mode 100644
index 00000000..1db06908
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_data_flash_example.h
@@ -0,0 +1,57 @@
+/**
+ * \file
+ *
+ * \brief Example specific DataFlash configuration file
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef _CONF_DATA_FLASH_EXAMPLE_H
+#define _CONF_DATA_FLASH_EXAMPLE_H
+
+#include "conf_board.h"
+
+/*! \name Configuration
+ */
+//! @{
+#define DATA_FLASH_LED_EXAMPLE_0 LED0_PIN
+//! @}
+
+#endif  // _CONF_DATA_FLASH_EXAMPLE_H
diff --git a/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_spi.h b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..9def00ab
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/example/samd20_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 SPI configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/data_flash/at45dbx/module_config/conf_at45dbx.h b/common2/components/memory/data_flash/at45dbx/module_config/conf_at45dbx.h
new file mode 100644
index 00000000..bee8e6d5
--- /dev/null
+++ b/common2/components/memory/data_flash/at45dbx/module_config/conf_at45dbx.h
@@ -0,0 +1,97 @@
+/**
+ * \file
+ *
+ * \brief AT45DBX configuration file.
+ *
+ * This file contains the possible external configuration of the AT45DBX.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef _CONF_AT45DBX_H_
+#define _CONF_AT45DBX_H_
+
+#include "at45dbx.h"
+#include <board.h>
+
+#warning "Using a default at45dbx configuration: edit and modify the file conf_at45dbx.h depending on the application."
+
+//! Size of AT45DBX data flash memories to manage.
+#define AT45DBX_MEM_SIZE            AT45DBX_8MB
+
+//! Number of AT45DBX components to manage.
+#define AT45DBX_MEM_CNT             1
+
+//! SPI master speed in Hz.
+#define AT45DBX_CLOCK_SPEED         9600
+
+#ifdef EXT2_SPI_MODULE
+//! Select the SPI module AT45DBX is connected to
+#  define AT45DBX_SPI                 EXT2_SPI_MODULE
+#  define AT45DBX_SPI_PINMUX_SETTING  EXT2_SPI_SERCOM_MUX_SETTING
+#  define AT45DBX_SPI_PINMUX_PAD0     EXT2_SPI_SERCOM_PINMUX_PAD0
+#  define AT45DBX_SPI_PINMUX_PAD1     EXT2_SPI_SERCOM_PINMUX_PAD1
+#  define AT45DBX_SPI_PINMUX_PAD2     EXT2_SPI_SERCOM_PINMUX_PAD2
+#  define AT45DBX_SPI_PINMUX_PAD3     EXT2_SPI_SERCOM_PINMUX_PAD3
+#  define AT45DBX_CS                  EXT2_PIN_15
+#else
+#  define AT45DBX_SPI                 0
+#  define AT45DBX_SPI_PINMUX_SETTING  0
+#  define AT45DBX_SPI_PINMUX_PAD0     0
+#  define AT45DBX_SPI_PINMUX_PAD1     0
+#  define AT45DBX_SPI_PINMUX_PAD2     0
+#  define AT45DBX_SPI_PINMUX_PAD3     0
+#  define AT45DBX_CS                  0
+#endif
+/*
+ * For ATSAMR21G18-MR210UA, AT45DB041E is connected to ATSAMR21G18A on board.
+ * pins connections as below:
+ * #define AT45DBX_SPI                 SERCOM5
+ * #define AT45DBX_SPI_PINMUX_SETTING  SPI_SIGNAL_MUX_SETTING_K
+ * #define AT45DBX_SPI_PINMUX_PAD0     PINMUX_UNUSED
+ * #define AT45DBX_SPI_PINMUX_PAD1     PINMUX_PB03D_SERCOM5_PAD1
+ * #define AT45DBX_SPI_PINMUX_PAD2     PINMUX_PB22D_SERCOM5_PAD2
+ * #define AT45DBX_SPI_PINMUX_PAD3     PINMUX_PB23D_SERCOM5_PAD3
+ * #define AT45DBX_CS                  PIN_PB02
+ */
+
+#endif  // _CONF_AT45DBX_H_
diff --git a/common2/components/memory/eeprom/at30tse75x/at30tse75x.c b/common2/components/memory/eeprom/at30tse75x/at30tse75x.c
new file mode 100644
index 00000000..1d02ba33
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/at30tse75x.c
@@ -0,0 +1,283 @@
+/**
+ * \file
+ *
+ * \brief AT30TSE75X driver
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "at30tse75x.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct i2c_master_module dev_inst_at30tse75x;
+uint8_t resolution = AT30TSE_CONFIG_RES_9_bit;
+
+/**
+ * \brief Configures the SERCOM I2C master to be used with the AT30TSE75X device.
+ */
+void at30tse_init(void)
+{
+    /* Initialize config structure and device instance. */
+	struct i2c_master_config conf;
+	i2c_master_get_config_defaults(&conf);
+
+	conf.pin_number_pad0 = AT30TSE_PIN_PAD0;
+	conf.pin_number_pad1 = AT30TSE_PIN_PAD1;
+	
+	conf.pinmux_sel_pad0 = AT30TSE_MUX_PAD0;
+	conf.pinmux_sel_pad1 = AT30TSE_MUX_PAD1;
+
+	/* Initialize and enable device with config. */
+	i2c_master_init(&dev_inst_at30tse75x, AT30TSE_I2C_MODULE, &conf);
+	i2c_enable(dev_inst_at30tse75x.hw);
+}
+
+/**
+ * \brief Writes the EEPROM with data provided.
+ *
+ * \param[out] *data Pointer to the data buffer.
+ * \param[in]  length Number of data bytes.
+ * \param[in]  word_addr Word address of the EEPROM.
+ * \param[in]  page Page number of the EEPROM.
+ */
+void at30tse_eeprom_write(uint8_t *data, uint8_t length, uint8_t word_addr, uint8_t page)
+{
+	/* ACK polling for consecutive writing not implemented! */
+	uint8_t buffer[17];
+	/* Byte addr in page (0-15) */
+	buffer[0] = word_addr & 0x0F;
+	/* 4 lower bits of page addr in EEPROM	 */
+	buffer[0] |= (0x0F & page) << 4;
+
+	/* Copy data to be sent */
+	for (uint8_t i=1; i<17; i++){
+		buffer[i] = data[i-1];
+	}
+
+	/* Set up TWI transfer */
+    struct i2c_master_packet packet = {
+		.address     = AT30TSE758_EEPROM_TWI_ADDR | (page >> 4),
+		.data_length = length+1,
+		.data        = buffer,
+	};
+	/* Do the transfer */
+    i2c_master_write_packet_wait(&dev_inst_at30tse75x, &packet);
+}
+
+/**
+ * \brief Reads data from the EEPROM.
+ *
+ * \param[out] *data Pointer to the data buffer.
+ * \param[in]  length Number of data bytes.
+ * \param[in]  word_addr Word address of the EEPROM.
+ * \param[in]  page Page number of the EEPROM.
+ */
+void at30tse_eeprom_read(uint8_t *data, uint8_t length, uint8_t word_addr, uint8_t page)
+{
+	/* ACK polling for consecutive reading not implemented! */
+	uint8_t buffer[1];
+	/* Byte addr in page (0-15) */
+	buffer[0] = word_addr & 0x0F;
+	/* 4 lower bits of page addr in EEPROM */
+	buffer[0] |= (0x0F & page) << 4;
+
+	/* Set up internal EEPROM addr write */
+    struct i2c_master_packet addr_transfer = {
+		.address     = AT30TSE758_EEPROM_TWI_ADDR | (page >> 4),
+		.data_length = 1,
+		.data        = buffer,
+	};
+	/* Reading sequence */
+    struct i2c_master_packet read_transfer = {
+		.address     = AT30TSE758_EEPROM_TWI_ADDR | (page >> 4),
+		.data_length = length,
+		.data        = data,
+	};
+
+	/* Do the transfer */
+    i2c_master_write_packet_wait_no_stop(&dev_inst_at30tse75x, &addr_transfer);
+    i2c_master_read_packet_wait(&dev_inst_at30tse75x, &read_transfer);
+}
+
+/**
+ * \brief Sets the register pointer with specified reg value.
+ *
+ * \param[in] reg Register value of the pointer register.
+ * \param[in] reg_type Register type being pointed by pointer register.
+ */
+void at30tse_set_register_pointer(uint8_t reg, uint8_t reg_type)
+{
+	uint8_t buffer[] = {reg | reg_type};
+    struct i2c_master_packet transfer = {
+		.address     = AT30TSE_TEMPERATURE_TWI_ADDR,
+		.data_length = 1,
+		.data        = buffer,
+	};
+	/* Do the transfer */
+    i2c_master_write_packet_wait(&dev_inst_at30tse75x, &transfer);
+}
+
+/**
+ * \brief Reads the value from the register reg.
+ *
+ * \param[in] reg Register to read.
+ * \param[in] reg_type Type of the register (Volatile or Non-volatile).
+ * \param[in] reg_size Register size.
+ *
+ * \return Register value.
+ */
+uint16_t at30tse_read_register(uint8_t reg, uint8_t reg_type, uint8_t reg_size)
+{
+	uint8_t buffer[2];
+	buffer[0] = reg | reg_type;
+	buffer[1] = 0;
+
+	/* Internal register pointer in AT30TSE */
+    struct i2c_master_packet write_transfer = {
+		.address     = AT30TSE_TEMPERATURE_TWI_ADDR,
+		.data_length = 1,
+		.data        = buffer,
+	};
+	/* Read data */
+    struct i2c_master_packet read_transfer = {
+		.address     = AT30TSE_TEMPERATURE_TWI_ADDR,
+		.data_length = reg_size,
+		.data        = buffer,
+	};
+	/* Do the transfer */
+	i2c_master_write_packet_wait_no_stop(&dev_inst_at30tse75x, &write_transfer);
+    i2c_master_read_packet_wait(&dev_inst_at30tse75x, &read_transfer);
+
+	return (buffer[0] << 8) | buffer[1];
+}
+
+/**
+ * \brief Writes the specified register reg with the reg_value passed
+ *
+ * \param[in] reg Register to write.
+ * \param[in] reg_type Type of the register (Volatile or Non-volatile).
+ * \param[in] reg_size Register size.
+ * \param[in] reg_value Value to be written to reg.
+ */
+void at30tse_write_register(uint8_t reg, uint8_t reg_type, uint8_t reg_size, uint16_t reg_value)
+{
+	uint8_t data[3];
+	data[0] = reg | reg_type;
+	data[1] = 0x00FF & (reg_value >> 8);
+	data[2] = 0x00FF & reg_value;
+
+	/* Internal register pointer in AT30TSE */
+    struct i2c_master_packet transfer = {
+		.address     = AT30TSE_TEMPERATURE_TWI_ADDR,
+		.data_length = 1 + reg_size,
+		.data        = data,
+	};
+	/* Do the transfer */
+	i2c_master_write_packet_wait(&dev_inst_at30tse75x, &transfer);
+}
+
+/**
+ * \brief Writes the configuration register reg with the value passed
+ *
+ * \param[in] value Register value to be written.
+ */
+void at30tse_write_config_register(uint16_t value)
+{
+	at30tse_write_register(AT30TSE_CONFIG_REG,
+							AT30TSE_NON_VOLATILE_REG,
+							AT30TSE_CONFIG_REG_SIZE-1,
+							value);
+
+	resolution = ( value >> AT30TSE_CONFIG_RES_Pos ) & ( AT30TSE_CONFIG_RES_Msk >> AT30TSE_CONFIG_RES_Pos);
+
+}
+
+/**
+ * \brief Reads the temperature value.
+ *
+ * \return Temperature data.
+ */
+double at30tse_read_temperature(void)
+{
+	/* Read the 16-bit temperature register. */
+	uint16_t data = at30tse_read_register(AT30TSE_TEMPERATURE_REG,
+											AT30TSE_NON_VOLATILE_REG,
+											AT30TSE_TEMPERATURE_REG_SIZE);
+
+	double temperature = 0;
+	int8_t sign = 1;
+
+	/*Check if negative and clear sign bit. */
+	if (data & (1 << 15)){
+		sign *= -1;
+		data &= ~(1 << 15);
+	}
+
+	/* Convert to temperature  */
+	switch (resolution){
+		case AT30TSE_CONFIG_RES_9_bit:
+			data = (data >> 7);
+			temperature = data * sign * 0.5;
+			break;
+		case AT30TSE_CONFIG_RES_10_bit:
+			data = (data >> 6);
+			temperature = data * sign * 0.25;
+			break;
+		case AT30TSE_CONFIG_RES_11_bit:
+			data = (data >> 5);
+			temperature = data * sign * 0.125;
+			break;
+		case AT30TSE_CONFIG_RES_12_bit:
+			data = (data >> 4);
+			temperature = data * sign * 0.0625;
+			break;
+		default:
+			break;
+	}
+	return temperature;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/common2/components/memory/eeprom/at30tse75x/at30tse75x.h b/common2/components/memory/eeprom/at30tse75x/at30tse75x.h
new file mode 100644
index 00000000..648101f9
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/at30tse75x.h
@@ -0,0 +1,139 @@
+/**
+ * \file
+ *
+ * \brief AT30TSE75X driver
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef AT30TSE75X_H_INCLUDED
+#define AT30TSE75X_H_INCLUDED
+
+#include <compiler.h>
+#include <i2c_master.h>
+
+/* Temperature sensor configuration file */
+#include "conf_at30tse75x.h"
+
+/**
+ * \defgroup asfdoc_samb_at30tse75x_group AT30TSE75X Digital Temperature Sensor and Serial EEPROM.
+ * This driver provides API for AT30TSE75X temperature sensor and EEPROM
+ * through I2C interface.
+ *
+ * See \ref asfdoc_samb_at30tse75x_qs.
+ *
+ *
+ * \section asfdoc_samb_at30tse75x_dependencies Dependencies
+ * This driver depends on the following module:
+ * - \ref asfdoc_samb_i2c_group "SAM B11 I2C master"
+ *
+ * \section asfdoc_samb_at30tse75x_api_overview API Overview
+ * @{
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define AT30TSE_TEMPERATURE_TWI_ADDR	0x48 //0b1001000
+#define AT30TSE758_EEPROM_TWI_ADDR		0x50 //0b1010000
+#define AT30TSE754_EEPROM_TWI_ADDR		0x50 //0b1010000
+#define AT30TSE752_EEPROM_TWI_ADDR		0x50 //0b1010000
+
+#define AT30TSE_TEMPERATURE_REG			0x00
+#define AT30TSE_TEMPERATURE_REG_SIZE	2
+#define AT30TSE_NON_VOLATILE_REG		0x00
+#define AT30TSE_VOLATILE_REG			0x10
+
+#define AT30TSE_CONFIG_REG				0x01
+#define AT30TSE_CONFIG_REG_SIZE			2
+#define AT30TSE_TLOW_REG				0x02
+#define AT30TSE_TLOW_REG_SIZE			2
+#define AT30TSE_THIGH_REG				0x03
+#define AT30TSE_THIGH_REG_SIZE			2
+
+#define AT30TSE_CONFIG_RES_Pos 			13
+#define AT30TSE_CONFIG_RES_Msk 			(0x03 << AT30TSE_CONFIG_RES_Pos)
+#define AT30TSE_CONFIG_RES(value) 		((AT30TSE_CONFIG_RES_Msk & ((value) << AT30TSE_CONFIG_RES_Pos)))
+
+#define AT30TSE_CONFIG_RES_9_bit		0
+#define AT30TSE_CONFIG_RES_10_bit		1
+#define AT30TSE_CONFIG_RES_11_bit		2
+#define AT30TSE_CONFIG_RES_12_bit		3
+
+#define AT30TSE_CONFIG_FTQ_Pos 			13
+#define AT30TSE_CONFIG_FTQ_Msk 			(0x03 << AT30TSE_CONFIG_FTQ_Pos)
+#define AT30TSE_CONFIG_FTQ(value) 		((AT30TSE_CONFIG_FTQ_Msk & ((value) << AT30TSE_CONFIG_FTQ_Pos)))
+
+#define AT30TSE_CONFIG_FTQ_1_fault		0
+#define AT30TSE_CONFIG_RES_2_fault		1
+#define AT30TSE_CONFIG_RES_4_fault		2
+#define AT30TSE_CONFIG_RES_6_fault		3
+
+// R/W bits
+#define AT30TSE_CONFIG_OS				(1 << 15)
+#define AT30TSE_CONFIG_R1				(1 << 14)
+#define AT30TSE_CONFIG_R0				(1 << 13)
+#define AT30TSE_CONFIG_FT1				(1 << 12)
+#define AT30TSE_CONFIG_FT0				(1 << 11)
+#define AT30TSE_CONFIG_POL				(1 << 10)
+#define AT30TSE_CONFIG_CMP_INT			(1 << 9)
+#define AT30TSE_CONFIG_SD				(1 << 8)
+
+/* Read only bits */
+#define AT30TSE_CONFIG_NVRBSY			(1 << 0)
+
+void at30tse_init(void);
+void at30tse_eeprom_write(uint8_t *data, uint8_t length, uint8_t word_addr, uint8_t page);
+void at30tse_eeprom_read(uint8_t *data, uint8_t length, uint8_t word_addr, uint8_t page);
+double at30tse_read_temperature(void);
+void at30tse_write_config_register(uint16_t value);
+uint16_t at30tse_read_register(uint8_t reg, uint8_t reg_type, uint8_t reg_size);
+void at30tse_write_register(uint8_t reg, uint8_t reg_type, uint8_t reg_size, uint16_t reg_value);
+void at30tse_set_register_pointer(uint8_t reg, uint8_t reg_type);
+
+#ifdef __cplusplus
+}
+#endif
+
+/** @} */
+
+#endif /* AT30TSE75X_H_ */
diff --git a/common2/components/memory/eeprom/at30tse75x/example/at30tes_example.c b/common2/components/memory/eeprom/at30tse75x/example/at30tes_example.c
new file mode 100644
index 00000000..f07f9470
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/at30tes_example.c
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief AT30TS(E)75x EEPROM and Temperature Sensor Example.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \page asfdoc_samb_at30tse75x_qs AT30TS(E)75x EEPROM and Temperature Sensor Example
+ *
+ * \section Purpose
+ *
+ * The application demonstrates how to access AT30TS(E)75x temperature sensor.
+ *
+ * \section Requirements
+ *
+ * This package can be used with:
+ * - SAMB11 Xplained Pro board.
+ *
+ * \section Description
+ * There are 2 stages in the example.
+ * - In 1st stage, some patterns are written to the specified memory address of
+ * the EEPROM in AT30TSE75x. Then the memory is read and checked (note this
+ * stage is only for the device which has EEPROM).
+ * - In 2nd stage, the temperature sampled by AT30TS(E)75x is read every second.
+ *
+ * \section compinfo Compilation Info
+ * This software was written for the GNU GCC and IAR EWARM.
+ * Other compilers may or may not work.
+ *
+ * \section contactinfo Contact Information
+ * For further information, visit
+ * <A href="http://www.atmel.com/">Atmel</A>.\n
+ * Support and FAQ: http://www.atmel.com/design-support/
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include <string.h>
+#include "at30tse75x.h"
+
+#define NB_PAGE 16
+#define NB_BYTE 16
+
+static uint8_t rx_buffer[NB_BYTE], tx_buffer[NB_BYTE];
+
+static void delay(uint32_t count)
+{
+	for (uint32_t i = 0; i < count; i++) {
+		for (uint32_t j = 0; j < 1000; j++)
+			asm volatile ("nop");
+	}
+}
+
+int main(void)
+{
+	volatile double temper_value;
+	volatile bool data_check_status1 = true,
+	              data_check_status2 = true;
+	uint32_t i;
+
+	system_clock_config(CLOCK_RESOURCE_XO_26_MHZ, CLOCK_FREQ_26_MHZ);
+
+	/* Initialize AT30TS(E)75x */
+	at30tse_init();
+
+	/* First round data check */
+	for (i = 0; i < NB_BYTE; i++) {
+		tx_buffer[i] = i;
+	}
+
+	/* Write pages in EEPROM */
+	for (i = 0; i < NB_PAGE; i++) {
+		at30tse_eeprom_write(tx_buffer, NB_BYTE, 0, i);
+		delay(200);
+	}
+	
+	/* Read each page in EEPROM and compare them */
+	for (i = 0; i < NB_PAGE; i++) {
+		memset(rx_buffer, 0, NB_BYTE);
+		at30tse_eeprom_read(rx_buffer, NB_BYTE, 0, i);
+		if (memcmp(tx_buffer, rx_buffer, NB_BYTE)) {
+			data_check_status1 = false;
+			break;
+		}
+	}
+
+	/* Second round data check */
+	for (i = 0; i < NB_BYTE; i++) {
+		tx_buffer[i] = NB_BYTE - i;
+	}
+
+	/* Write pages in EEPROM */
+	for (i = 0; i < NB_PAGE; i++) {
+		at30tse_eeprom_write(tx_buffer, NB_BYTE, 0, i);
+		delay(200);
+	}
+	
+	/* Read each page in EEPROM and compare them */
+	for (i = 0; i < NB_PAGE; i++) {
+		memset(rx_buffer, 0, NB_BYTE);
+		at30tse_eeprom_read(rx_buffer, NB_BYTE, 0, i);
+		if (memcmp(tx_buffer, rx_buffer, NB_BYTE)) {
+			data_check_status2 = false;
+			break;
+		}
+	}
+
+	/* Read thigh and tlow */
+	volatile uint16_t thigh = 0;
+	thigh = at30tse_read_register(AT30TSE_THIGH_REG,
+			AT30TSE_NON_VOLATILE_REG, AT30TSE_THIGH_REG_SIZE);
+
+	volatile uint16_t tlow = 0;
+	tlow = at30tse_read_register(AT30TSE_TLOW_REG,
+			AT30TSE_NON_VOLATILE_REG, AT30TSE_TLOW_REG_SIZE);
+			
+	/* Set 12-bit resolution mode. */
+	at30tse_write_config_register(
+			AT30TSE_CONFIG_RES(AT30TSE_CONFIG_RES_12_bit));
+
+	while (1) {
+		/* Read current temperature. */
+		temper_value = at30tse_read_temperature();
+	}
+
+	UNUSED(data_check_status1);
+	UNUSED(data_check_status2);
+	UNUSED(temper_value);
+	UNUSED(tlow);
+	UNUSED(thigh);
+}
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_at30tse75x.h b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_at30tse75x.h
new file mode 100644
index 00000000..dc6c7b4e
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_at30tse75x.h
@@ -0,0 +1,59 @@
+/**
+ * \file
+ *
+ * \brief AT30TSE75X Temperature sensor driver configuration file.
+ *
+ * Copyright (c) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_AT30TSE75X_H_INCLUDED
+#define CONF_AT30TSE75X_H_INCLUDED
+
+#include <board.h>
+
+#define AT30TSE_I2C_MODULE  I2C0
+
+#define AT30TSE_PIN_PAD0 PIN_LP_GPIO_8
+#define AT30TSE_PIN_PAD1 PIN_LP_GPIO_9
+
+#define AT30TSE_MUX_PAD0 MUX_LP_GPIO_8_I2C0_SDA
+#define AT30TSE_MUX_PAD1 MUX_LP_GPIO_9_I2C0_SCL
+
+#endif /* CONF_AT30TSE75X_H_INCLUDED */
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_board.h b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_board.h
new file mode 100644
index 00000000..c0567889
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_i2c.h b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_i2c.h
new file mode 100644
index 00000000..f628ab47
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/conf_i2c.h
@@ -0,0 +1,57 @@
+
+/**
+ * \file
+ *
+ * \brief SAM B11 I2C configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_I2C_H_INCLUDED
+#  define CONF_I2C_H_INCLUDED
+
+#  define CONF_I2C_MASTER_ENABLE     true
+#  define CONF_I2C_SLAVE_ENABLE      false
+
+#  define I2C_CALLBACK_MODE          false
+
+#endif /* CONF_I2C_H_INCLUDED */
\ No newline at end of file
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/Makefile b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/asf.h b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..a1bc07b8
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/asf.h
@@ -0,0 +1,82 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: EEPROM AT30TSE75X

+#include <at30tse75x.h>

+

+// From module: GPIO - GPIO Pin Control for SAMB (Callback APIs)

+#include <gpio.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: I2C - Inter-Integrated Circuit for SAMB

+#include <i2c_common.h>

+#include <i2c_master.h>

+#include <i2c_master_interrupt.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Core System Driver for SAMB

+#include <system_sam_b.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/config.mk b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..d73e0439
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc/config.mk
@@ -0,0 +1,146 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samb11g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at30tse75x_example_flash.elf
+TARGET_SRAM = at30tse75x_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/eeprom/at30tse75x/at30tse75x.c \
+       common2/components/memory/eeprom/at30tse75x/example/at30tes_example.c \
+       sam0/boards/samb11_xplained_pro/board_init.c       \
+       sam0/drivers/gpio/gpio.c                           \
+       sam0/drivers/i2c/i2c_master.c                      \
+       sam0/drivers/i2c/i2c_master_interrupt.c            \
+       sam0/drivers/system/system_sam_b.c                 \
+       sam0/utils/cmsis/samb11/source/gcc/startup_samb11.c \
+       sam0/utils/cmsis/samb11/source/system_samb11.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/memory/eeprom/at30tse75x        \
+       common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samb11_xplained_pro                    \
+       sam0/drivers/gpio                                  \
+       sam0/drivers/i2c                                   \
+       sam0/drivers/system                                \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samb11/include                    \
+       sam0/utils/cmsis/samb11/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/eeprom/at30tse75x/example/samb11_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samb11/gcc/samb11g18a_sram.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samb11/gcc/samb11g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = 
+DEBUG_SCRIPT_SRAM  = sam0/boards/samb11_xplained_pro/debug_scripts/gcc/samb11_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMB11_XPLAINED_PRO                       \
+       -D I2C_MASTER_CALLBACK_MODE=true                   \
+       -D __SAMB11G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_at30tse75x.h b/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_at30tse75x.h
new file mode 100644
index 00000000..8c9cd1d9
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_at30tse75x.h
@@ -0,0 +1,59 @@
+/**
+ * \file
+ *
+ * \brief AT30TSE75X Temperature sensor driver configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_AT30TSE75X_H_INCLUDED
+#define CONF_AT30TSE75X_H_INCLUDED
+
+#include <board.h>
+
+#define AT30TSE_I2C_MODULE  I2C0
+
+#define AT30TSE_PIN_PAD0 PIN_LP_GPIO_8
+#define AT30TSE_PIN_PAD1 PIN_LP_GPIO_9
+
+#define AT30TSE_MUX_PAD0 MUX_LP_GPIO_8_I2C0_SDA
+#define AT30TSE_MUX_PAD1 MUX_LP_GPIO_9_I2C0_SCL
+
+#endif /* CONF_AT30TSE75X_H_INCLUDED */
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_board.h b/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_board.h
new file mode 100644
index 00000000..3c0b8a83
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM B11 CSP Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_i2c.h b/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_i2c.h
new file mode 100644
index 00000000..8d6a75ca
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11csp_xplained_pro/conf_i2c.h
@@ -0,0 +1,56 @@
+/**
+ * \file
+ *
+ * \brief SAM B11 CSP Xplained Pro I2C configuration
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_I2C_H_INCLUDED
+#  define CONF_I2C_H_INCLUDED
+
+#  define CONF_I2C_MASTER_ENABLE     true
+#  define CONF_I2C_SLAVE_ENABLE      false
+
+#  define I2C_CALLBACK_MODE          false
+
+#endif /* CONF_I2C_H_INCLUDED */
\ No newline at end of file
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_at30tse75x.h b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_at30tse75x.h
new file mode 100644
index 00000000..8c9cd1d9
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_at30tse75x.h
@@ -0,0 +1,59 @@
+/**
+ * \file
+ *
+ * \brief AT30TSE75X Temperature sensor driver configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_AT30TSE75X_H_INCLUDED
+#define CONF_AT30TSE75X_H_INCLUDED
+
+#include <board.h>
+
+#define AT30TSE_I2C_MODULE  I2C0
+
+#define AT30TSE_PIN_PAD0 PIN_LP_GPIO_8
+#define AT30TSE_PIN_PAD1 PIN_LP_GPIO_9
+
+#define AT30TSE_MUX_PAD0 MUX_LP_GPIO_8_I2C0_SDA
+#define AT30TSE_MUX_PAD1 MUX_LP_GPIO_9_I2C0_SCL
+
+#endif /* CONF_AT30TSE75X_H_INCLUDED */
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_board.h b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_board.h
new file mode 100644
index 00000000..8639301d
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM B11 ZR Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_i2c.h b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_i2c.h
new file mode 100644
index 00000000..b73508e7
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/conf_i2c.h
@@ -0,0 +1,56 @@
+/**
+ * \file
+ *
+ * \brief SAM B11 ZR Xplained Pro I2C configuration
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_I2C_H_INCLUDED
+#  define CONF_I2C_H_INCLUDED
+
+#  define CONF_I2C_MASTER_ENABLE     true
+#  define CONF_I2C_SLAVE_ENABLE      false
+
+#  define I2C_CALLBACK_MODE          false
+
+#endif /* CONF_I2C_H_INCLUDED */
\ No newline at end of file
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/Makefile b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/asf.h b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..a1bc07b8
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/asf.h
@@ -0,0 +1,82 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: EEPROM AT30TSE75X

+#include <at30tse75x.h>

+

+// From module: GPIO - GPIO Pin Control for SAMB (Callback APIs)

+#include <gpio.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: I2C - Inter-Integrated Circuit for SAMB

+#include <i2c_common.h>

+#include <i2c_master.h>

+#include <i2c_master_interrupt.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Core System Driver for SAMB

+#include <system_sam_b.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..6287c00a
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk
@@ -0,0 +1,146 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samb11zr
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at30tse75x_example_flash.elf
+TARGET_SRAM = at30tse75x_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/eeprom/at30tse75x/at30tse75x.c \
+       common2/components/memory/eeprom/at30tse75x/example/at30tes_example.c \
+       sam0/boards/samb11zr_xplained_pro/board_init.c     \
+       sam0/drivers/gpio/gpio.c                           \
+       sam0/drivers/i2c/i2c_master.c                      \
+       sam0/drivers/i2c/i2c_master_interrupt.c            \
+       sam0/drivers/system/system_sam_b.c                 \
+       sam0/utils/cmsis/samb11/source/gcc/startup_samb11.c \
+       sam0/utils/cmsis/samb11/source/system_samb11.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/memory/eeprom/at30tse75x        \
+       common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samb11zr_xplained_pro                  \
+       sam0/drivers/gpio                                  \
+       sam0/drivers/i2c                                   \
+       sam0/drivers/system                                \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samb11/include                    \
+       sam0/utils/cmsis/samb11/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samb11/gcc/samb11g18a_sram.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samb11/gcc/samb11g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = 
+DEBUG_SCRIPT_SRAM  = sam0/boards/samb11zr_xplained_pro/debug_scripts/gcc/samb11zr_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMB11ZR_XPLAINED_PRO                     \
+       -D I2C_MASTER_CALLBACK_MODE=true                   \
+       -D __SAMB11ZR__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/eeprom/at30tse75x/module_config/conf_at30tse75x.h b/common2/components/memory/eeprom/at30tse75x/module_config/conf_at30tse75x.h
new file mode 100644
index 00000000..dc6c7b4e
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/module_config/conf_at30tse75x.h
@@ -0,0 +1,59 @@
+/**
+ * \file
+ *
+ * \brief AT30TSE75X Temperature sensor driver configuration file.
+ *
+ * Copyright (c) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_AT30TSE75X_H_INCLUDED
+#define CONF_AT30TSE75X_H_INCLUDED
+
+#include <board.h>
+
+#define AT30TSE_I2C_MODULE  I2C0
+
+#define AT30TSE_PIN_PAD0 PIN_LP_GPIO_8
+#define AT30TSE_PIN_PAD1 PIN_LP_GPIO_9
+
+#define AT30TSE_MUX_PAD0 MUX_LP_GPIO_8_I2C0_SDA
+#define AT30TSE_MUX_PAD1 MUX_LP_GPIO_9_I2C0_SCL
+
+#endif /* CONF_AT30TSE75X_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/doxygen/common2.components.memory.sd_mmc_spi/doxyfile.doxygen b/common2/components/memory/sd_mmc/doxygen/common2.components.memory.sd_mmc_spi/doxyfile.doxygen
new file mode 100644
index 00000000..d569c9b6
--- /dev/null
+++ b/common2/components/memory/sd_mmc/doxygen/common2.components.memory.sd_mmc_spi/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC stack on SPI interface"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../sd_mmc.c ../../sd_mmc_spi.c ../../sd_mmc.h ../../sd_mmc_spi.h ../../sd_mmc_protocol.h ../../module_config_spi/conf_sd_mmc.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/doxygen/common2.components.memory.sd_mmc_spi/doxygen_module_mainpage.h b/common2/components/memory/sd_mmc/doxygen/common2.components.memory.sd_mmc_spi/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/components/memory/sd_mmc/doxygen/common2.components.memory.sd_mmc_spi/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/components/memory/sd_mmc/example1/example.c b/common2/components/memory/sd_mmc/example1/example.c
new file mode 100644
index 00000000..306a4ae4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/example.c
@@ -0,0 +1,384 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC card example
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \mainpage SD/MMC Card Example
+ *
+ * \section Purpose
+ *
+ * This example demonstrates basic functions of SD/MMC stack.
+ * It will read and write an SD/MMC card over MCI or SPI interface.
+ * It is a development base for a specific SD/MMC
+ * application which does not require a file system.
+ *
+ * \section Description
+ *
+ * The example executes the following sequences:
+ * - For each card slot available on board:
+ *   - Wait for a card insertion
+ *   - Initialize an SD/MMC card.
+ *   - If the inserted card is an SD or MMC card, test read/write access.
+ *       - Write data into the card
+ *       - Read data from the card
+ *       - Verify the written data.
+ *
+ * The example outputs the information through the standard output (stdio).
+ * To know the output used on the board, look in the conf_example.h file
+ * and connect a terminal to the correct stdio port.
+ * 
+ * While using Xplained Pro evaluation kits, please attach I/O1 Xplained Pro
+ * extension board to EXT1.
+ *
+ * \section Usage
+ *
+ * -# Build the program and download it into the  board.
+ * -# On the computer, open and configure a terminal application.
+ * Refer to conf_example.h file.
+ * -# Start the application.
+ * -# In the terminal window, the following text should appear:
+ *    \code
+ *     -- SD/MMC Card Example --
+ *     -- Compiled: xxx xx xxxx xx:xx:xx --
+ *     Please plug an SD/MMC card in slot 1.
+ *     !!Warning, the data contained will be lost!!
+ *    \endcode
+ * -# If the inserted card is a SD or MMC card, the following text should appear:
+ *     A card has been connected.
+ *     Card information:
+ *         xxxx
+ *         xxxx MB
+ *         Write pattern... XXXXKBps [OK]
+ *         Read... XXXXKBps [OK]
+ *         Read and check pattern... [OK]
+ *     Test finished, please unplugged card.
+ *    \endcode
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include "conf_example.h"
+#include <string.h>
+#include "time_tick.h"
+
+//! Structure for UART module connected to EDBG (used for unit test output)
+struct usart_module cdc_uart_module;
+
+//! \name Read/write access configurations
+//! @{
+
+//! Offset before the end of memory card to start the test
+#define TEST_MEM_START_OFFSET  (1024lu * 1024lu * 4lu) // 4MB
+
+//! Memory area size dedicated for the read/write test
+#define TEST_MEM_AREA_SIZE (1024lu * 128lu) // 128KB
+/**
+ * Size of each read or write access.
+ * Increasing this number can get higher R/W performance.
+ */
+#define TEST_MEM_ACCESS_SIZE  (8lu * SD_MMC_BLOCK_SIZE)
+
+#if TEST_MEM_START_OFFSET < TEST_MEM_AREA_SIZE
+#  error TEST_MEM_START_OFFSET must be higher than TEST_MEM_AREA_SIZE
+#endif
+#if TEST_MEM_ACCESS_SIZE > TEST_MEM_AREA_SIZE
+#  error TEST_MEM_AREA_SIZE must be higher than TEST_MEM_ACCESS_SIZE
+#endif
+
+//! The value used to generate test data
+#define TEST_FILL_VALUE_U32     (0x5500AAFFU)
+
+//! Buffer used by read/write tests
+COMPILER_WORD_ALIGNED
+static uint8_t buf_test[TEST_MEM_ACCESS_SIZE];
+
+//! @}
+
+static void main_display_info_card(uint8_t slot);
+static void main_test_memory(uint8_t slot);
+
+/**
+ * \brief Initialize the USART for output
+ *
+ * Initializes the SERCOM USART used for sending the output to the
+ * computer via the EDBG CDC gateway.
+ */
+static void cdc_uart_init(void)
+{
+	struct usart_config usart_conf;
+
+	/* Configure USART for unit test output */
+	usart_get_config_defaults(&usart_conf);
+	usart_conf.mux_setting = CONF_STDIO_MUX_SETTING;
+	usart_conf.pinmux_pad0 = CONF_STDIO_PINMUX_PAD0;
+	usart_conf.pinmux_pad1 = CONF_STDIO_PINMUX_PAD1;
+	usart_conf.pinmux_pad2 = CONF_STDIO_PINMUX_PAD2;
+	usart_conf.pinmux_pad3 = CONF_STDIO_PINMUX_PAD3;
+	usart_conf.baudrate    = CONF_STDIO_BAUDRATE;
+
+	stdio_serial_init(&cdc_uart_module, CONF_STDIO_USART, &usart_conf);
+	usart_enable(&cdc_uart_module);
+}
+
+/**
+ * \brief Application entry point.
+ *
+ * \return Unused (ANSI-C compatibility).
+ */
+int main(void)
+{
+	uint8_t slot = 0;
+	sd_mmc_err_t err;
+
+	system_init();
+	delay_init();
+	cdc_uart_init();
+
+	irq_initialize_vectors();
+	cpu_irq_enable();
+
+	time_tick_init();
+
+	// Initialize SD MMC stack
+	sd_mmc_init();
+
+	printf("\x0C\n\r-- SD/MMC Card Example --\n\r");
+	printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
+	while (1) {
+		if (slot == sd_mmc_nb_slot()) {
+			slot = 0;
+		}
+		printf("Please plug an SD/MMC card in slot %d.\n\r", slot+1);
+
+		// Wait for a card and ready
+		do {
+			err = sd_mmc_check(slot);
+			if ((SD_MMC_ERR_NO_CARD != err)
+					&& (SD_MMC_INIT_ONGOING != err)
+					&& (SD_MMC_OK != err)) {
+				printf("Card install FAILED\n\r");
+				printf("Please unplug and re-plug the card.\n\r");
+				while (SD_MMC_ERR_NO_CARD != sd_mmc_check(slot)) {
+				}
+			}
+		} while (SD_MMC_OK != err);
+	
+		// Display basic card information
+		main_display_info_card(slot);
+	
+		/* Test the card */
+		if (sd_mmc_get_type(slot) & (CARD_TYPE_SD | CARD_TYPE_MMC)) {
+			// SD/MMC Card R/W
+			main_test_memory(slot);
+		}	
+
+		printf("Test finished, please unplugged the card.\n\r");
+		while (SD_MMC_OK == sd_mmc_check(slot)) {
+		}
+		slot++;
+	}
+}
+
+/**
+ * \brief Display basic information of the card.
+ * \note This function should be called only after the card has been
+ *       initialized successfully.
+ *
+ * \param slot   SD/MMC slot to test
+ */
+static void main_display_info_card(uint8_t slot)
+{
+	printf("Card information:\n\r");
+
+	printf("    ");
+	switch (sd_mmc_get_type(slot)) {
+	case CARD_TYPE_SD | CARD_TYPE_HC:
+		printf("SDHC");
+		break;
+	case CARD_TYPE_SD:
+		printf("SD");
+		break;
+	case CARD_TYPE_MMC | CARD_TYPE_HC:
+		printf("MMC High Density");
+		break;
+	case CARD_TYPE_MMC:
+		printf("MMC");
+		break;
+	case CARD_TYPE_SD_COMBO:
+		printf("SD COMBO");
+		break;
+	case CARD_TYPE_UNKNOWN:
+	default:
+		printf("Unknow\n\r");
+		return;
+	}
+	printf("\n\r    %d MB\n\r", (uint16_t)(sd_mmc_get_capacity(slot)/1024));
+}
+
+/**
+ * \brief Card R/W tests
+ *
+ * \param slot   SD/MMC slot to test
+ */
+static void main_test_memory(uint8_t slot)
+{
+	uint32_t last_blocks_addr, i, nb_trans;
+	uint32_t tick_start, time_ms;
+
+	// Compute the last address
+	last_blocks_addr = sd_mmc_get_capacity(slot) *
+			(1024 / SD_MMC_BLOCK_SIZE);
+	if (last_blocks_addr < (TEST_MEM_START_OFFSET / 512lu)) {
+		printf("[Memory is too small.]\n\r");
+		return;
+	}
+	last_blocks_addr -= (TEST_MEM_START_OFFSET / SD_MMC_BLOCK_SIZE);
+
+	printf("Card R/W test:\n\r");
+
+	// Read the last block
+	printf("    Read... ");
+	tick_start = time_tick_get();
+	if (SD_MMC_OK != sd_mmc_init_read_blocks(slot,
+			last_blocks_addr,
+			TEST_MEM_AREA_SIZE / SD_MMC_BLOCK_SIZE)) {
+		printf("[FAIL]\n\r");
+		return;
+	}
+	for (nb_trans = 0; nb_trans < (TEST_MEM_AREA_SIZE / TEST_MEM_ACCESS_SIZE);
+			nb_trans++) {
+		if (SD_MMC_OK != sd_mmc_start_read_blocks(buf_test,
+					TEST_MEM_ACCESS_SIZE / SD_MMC_BLOCK_SIZE)) {
+			printf("[FAIL]\n\r");
+			return;
+		}
+		if (SD_MMC_OK != sd_mmc_wait_end_of_read_blocks(false)) {
+			printf("[FAIL]\n\r");
+			return;
+		}		
+	}
+	time_ms = time_tick_calc_delay(tick_start, time_tick_get());
+	if (time_ms) { // Valid time_ms
+		printf(" %d KBps ", (int)(((TEST_MEM_AREA_SIZE
+				* 1000lu) / 1024lu) / time_ms));
+	}
+	printf("[OK]\n\r");
+
+	if (sd_mmc_is_write_protected(slot)) {
+		printf("Card is write protected [WRITE TEST SKIPPED]\n\r");
+		return;
+	}
+	
+	// Fill buffer with a pattern
+	for (i = 0; i < (TEST_MEM_ACCESS_SIZE / sizeof(uint32_t)); i++) {
+		((uint32_t*)buf_test)[i] = TEST_FILL_VALUE_U32;
+	}
+
+	printf("    Write pattern... ");
+	if (SD_MMC_OK != sd_mmc_init_write_blocks(slot,
+			last_blocks_addr,
+			TEST_MEM_AREA_SIZE / SD_MMC_BLOCK_SIZE)) {
+		printf("[FAIL]\n\r");
+		return;
+	}
+	tick_start = time_tick_get();
+	for (nb_trans = 0; nb_trans < (TEST_MEM_AREA_SIZE / TEST_MEM_ACCESS_SIZE);
+			nb_trans++) {
+		((uint32_t*)buf_test)[0] = nb_trans; // Unique value for each area
+		if (SD_MMC_OK != sd_mmc_start_write_blocks(buf_test,
+				TEST_MEM_ACCESS_SIZE / SD_MMC_BLOCK_SIZE)) {
+			printf("[FAIL]\n\r");
+			return;
+		}
+		if (SD_MMC_OK != sd_mmc_wait_end_of_write_blocks(false)) {
+			printf("[FAIL]\n\r");
+			return;
+		}
+	}
+	time_ms = time_tick_calc_delay(tick_start, time_tick_get());
+	if (time_ms) { // Valid time_ms
+		printf(" %d KBps ", (int)(((TEST_MEM_AREA_SIZE
+				* 1000lu) / 1024lu) / time_ms));
+	}
+	printf("[OK]\n\r");
+
+	printf("    Read and check pattern... ");
+	if (SD_MMC_OK != sd_mmc_init_read_blocks(slot,
+			last_blocks_addr,
+			TEST_MEM_AREA_SIZE / SD_MMC_BLOCK_SIZE)) {
+		printf("Read [FAIL]\n\r");
+		return;
+	}
+	for (nb_trans = 0; nb_trans < (TEST_MEM_AREA_SIZE / TEST_MEM_ACCESS_SIZE);
+			nb_trans++) {
+		// Clear buffer
+		for (i = 0; i < (TEST_MEM_ACCESS_SIZE / sizeof(uint32_t)); i++) {
+			((uint32_t*)buf_test)[i] = 0xFFFFFFFF;
+		}
+		// Fill buffer
+		if (SD_MMC_OK != sd_mmc_start_read_blocks(buf_test,
+					TEST_MEM_ACCESS_SIZE / SD_MMC_BLOCK_SIZE)) {
+			printf("Read [FAIL]\n\r");
+			return;
+		}
+		if (SD_MMC_OK != sd_mmc_wait_end_of_read_blocks(false)) {
+			printf("Read [FAIL]\n\r");
+			return;
+		}
+		// Check the unique value of the area
+		if (((uint32_t*)buf_test)[0] != nb_trans) {
+			printf("Check [FAIL]\n\r");
+			return;
+		}
+		// Check buffer
+		for (i = 1; i < (TEST_MEM_ACCESS_SIZE / sizeof(uint32_t)); i++) {
+			if (((uint32_t*)buf_test)[i] != TEST_FILL_VALUE_U32) {
+				printf("Check [FAIL]\n\r");
+				return;
+			}
+		}
+	}
+	printf("[OK]\n\r");
+}
+
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..56f4ec6f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..0a3a68a9
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,172 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..84282c98
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Basic SD/MMC card example for SAMD20 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../time_tick_sam.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/samd20_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../time_tick.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h ../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd20/include ../../../../../../../sam0/utils/cmsis/samd20/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd20 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd20_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAMD20_XPLAINED_PRO __SAMD20J18__ __SAMD20J18__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..6a8f49b1
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..24ab42fd
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc/config.mk
@@ -0,0 +1,180 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example1_flash.elf
+TARGET_SRAM = sd_mmc_example1_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example1/example.c \
+       common2/components/memory/sd_mmc/example1/time_tick_sam.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example1          \
+       common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..6a8f49b1
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1.eww b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1.eww
new file mode 100644
index 00000000..57b8b300
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example1_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1_flash.ewd b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1_flash.ewd
new file mode 100644
index 00000000..7e71700b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1_flash.ewp b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1_flash.ewp
new file mode 100644
index 00000000..64752cef
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd20j18_samd20_xplained_pro/iar/sd_mmc_example1_flash.ewp
@@ -0,0 +1,2693 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd20</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd20_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example1</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick_sam.c</name>
+						</file>
+						<group>
+							<name>samd20j18_samd20_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..ad644c05
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..a0ee3392
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         true
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               false
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          true
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        true
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..29550ea9
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Basic SD/MMC card example for SAMD21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../time_tick_sam.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../time_tick.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h ../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd21/include ../../../../../../../sam0/utils/cmsis/samd21/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAMD21_XPLAINED_PRO __SAMD21J18A__ __SAMD21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..724a0db8
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..c83d60d2
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc/config.mk
@@ -0,0 +1,180 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example1_flash.elf
+TARGET_SRAM = sd_mmc_example1_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example1/example.c \
+       common2/components/memory/sd_mmc/example1/time_tick_sam.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example1          \
+       common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..724a0db8
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1.eww b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1.eww
new file mode 100644
index 00000000..57b8b300
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example1_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1_flash.ewd b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1_flash.ewd
new file mode 100644
index 00000000..451f82ab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1_flash.ewp b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1_flash.ewp
new file mode 100644
index 00000000..a63afbac
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example1_flash.ewp
@@ -0,0 +1,2732 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example1</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick_sam.c</name>
+						</file>
+						<group>
+							<name>samd21j18a_samd21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..667fac38
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..88ba2838
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Basic SD/MMC card example for SAML21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../time_tick_sam.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/saml21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../time_tick.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml21/include ../../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAML21_XPLAINED_PRO __SAML21J18A__ __SAML21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..6f0dbe83
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..35d4c994
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,180 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example1_flash.elf
+TARGET_SRAM = sd_mmc_example1_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example1/example.c \
+       common2/components/memory/sd_mmc/example1/time_tick_sam.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example1          \
+       common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include                    \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAML21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..6f0dbe83
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1.eww b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1.eww
new file mode 100644
index 00000000..57b8b300
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example1_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewd b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewd
new file mode 100644
index 00000000..250c73cf
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewp b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewp
new file mode 100644
index 00000000..5cd92ce3
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewp
@@ -0,0 +1,2624 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h</name>
+							</file>
+						</group>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example1</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick_sam.c</name>
+						</file>
+						<group>
+							<name>saml21j18a_saml21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..a439e52c
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,201 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..c86e1dc7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Basic SD/MMC card example for SAML21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../time_tick_sam.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../time_tick.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml21/include_b ../../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml21_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAML21_XPLAINED_PRO __SAML21J18B__ __SAML21J18B__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..6f0dbe83
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..ef23914d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,180 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18b
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example1_flash.elf
+TARGET_SRAM = sd_mmc_example1_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example1/example.c \
+       common2/components/memory/sd_mmc/example1/time_tick_sam.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml21_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example1          \
+       common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include_b                  \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAML21J18B__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..6f0dbe83
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1.eww b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1.eww
new file mode 100644
index 00000000..57b8b300
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example1_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewd b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewd
new file mode 100644
index 00000000..2bca7a88
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18b-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewp b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewp
new file mode 100644
index 00000000..dc74bcd1
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example1_flash.ewp
@@ -0,0 +1,2666 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include_b</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example1</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick_sam.c</name>
+						</file>
+						<group>
+							<name>saml21j18b_saml21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7603e0e7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..7a526ec5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..1f61b945
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..c92018f9
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Basic SD/MMC card example for SAML22 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../time_tick_sam.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../time_tick.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAML22_XPLAINED_PRO __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..c1e2f60d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..600fabb6
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc/config.mk
@@ -0,0 +1,180 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example1_flash.elf
+TARGET_SRAM = sd_mmc_example1_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example1/example.c \
+       common2/components/memory/sd_mmc/example1/time_tick_sam.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml22_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example1          \
+       common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..c1e2f60d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1.eww b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1.eww
new file mode 100644
index 00000000..57b8b300
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example1_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1_flash.ewd b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1_flash.ewd
new file mode 100644
index 00000000..03c7016f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1_flash.ewp b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1_flash.ewp
new file mode 100644
index 00000000..d09fcc06
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example1_flash.ewp
@@ -0,0 +1,2651 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example1</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick_sam.c</name>
+						</file>
+						<group>
+							<name>saml22n18a_saml22_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_board.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_clocks.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_example.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_example.h
new file mode 100644
index 00000000..7603e0e7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h
new file mode 100644
index 00000000..7a526ec5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h
new file mode 100644
index 00000000..1f61b945
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_spi.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..58f09404
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Basic SD/MMC card example for SAML22 Xplained Pro B"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../time_tick_sam.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../time_tick.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAML22_XPLAINED_PRO_B __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/Makefile b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/asf.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..c1e2f60d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/config.mk b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..596c27e7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,180 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example1_flash.elf
+TARGET_SRAM = sd_mmc_example1_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example1/example.c \
+       common2/components/memory/sd_mmc/example1/time_tick_sam.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml22_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example1          \
+       common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO_B                     \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/asf.h b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..c1e2f60d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1.eww b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1.eww
new file mode 100644
index 00000000..57b8b300
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example1_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1_flash.ewd b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1_flash.ewd
new file mode 100644
index 00000000..69c49251
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1_flash.ewp b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1_flash.ewp
new file mode 100644
index 00000000..119a9630
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example1_flash.ewp
@@ -0,0 +1,2651 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example1</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick_sam.c</name>
+						</file>
+						<group>
+							<name>saml22n18a_saml22_xplained_pro_b</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..814b959e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..07e5d6a5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         true
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               false
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          true
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        true
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..b4187ac5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..0a4f859f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Basic SD/MMC card example for SAMR21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../time_tick_sam.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/samr21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_spi.h ../../time_tick.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/port.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h ../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samr21/include ../../../../../../../sam0/utils/cmsis/samr21/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samr21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAMR21_XPLAINED_PRO __SAMR21G18A__ __SAMR21G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..724a0db8
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..d0e80e04
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc/config.mk
@@ -0,0 +1,180 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr21g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example1_flash.elf
+TARGET_SRAM = sd_mmc_example1_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example1/example.c \
+       common2/components/memory/sd_mmc/example1/time_tick_sam.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samr21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr21/source/gcc/startup_samr21.c \
+       sam0/utils/cmsis/samr21/source/system_samr21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example1          \
+       common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr21/include                    \
+       sam0/utils/cmsis/samr21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAMR21G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..724a0db8
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1.eww b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1.eww
new file mode 100644
index 00000000..57b8b300
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example1_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1_flash.ewd b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1_flash.ewd
new file mode 100644
index 00000000..4fe70101
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR21\samr21g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1_flash.ewp b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1_flash.ewp
new file mode 100644
index 00000000..57728796
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example1_flash.ewp
@@ -0,0 +1,2597 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example1</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick_sam.c</name>
+						</file>
+						<group>
+							<name>samr21g18a_samr21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/iar/startup_samr21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_board.h
new file mode 100644
index 00000000..29176c86
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..979269ed
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_example.h
new file mode 100644
index 00000000..2c3f9391
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..b028bbcc
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT3_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT3_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT3_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT3_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..00512bdf
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..f44cac37
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 SPI configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..66b9f3f6
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Basic SD/MMC card example for SAMR30 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../time_tick_sam.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/samr30_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../time_tick.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/port.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h ../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samr30/include ../../../../../../../sam0/utils/cmsis/samr30/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samr30 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samr30_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAMR30_XPLAINED_PRO __SAMR30G18A__ __SAMR30G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..36a3f7fa
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..206739d4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc/config.mk
@@ -0,0 +1,180 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr30g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example1_flash.elf
+TARGET_SRAM = sd_mmc_example1_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example1/example.c \
+       common2/components/memory/sd_mmc/example1/time_tick_sam.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samr30_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samr30/clock.c     \
+       sam0/drivers/system/clock/clock_samr30/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr30/source/gcc/startup_samr30.c \
+       sam0/utils/cmsis/samr30/source/system_samr30.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example1          \
+       common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr30_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samr30             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr30 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr30/include                    \
+       sam0/utils/cmsis/samr30/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR30_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAMR30G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..36a3f7fa
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1.eww b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1.eww
new file mode 100644
index 00000000..57b8b300
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example1_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1_flash.ewd b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1_flash.ewd
new file mode 100644
index 00000000..356aca08
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR30\samr30g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1_flash.ewp b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1_flash.ewp
new file mode 100644
index 00000000..71655aa7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example1_flash.ewp
@@ -0,0 +1,2594 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>CYCLE_MODE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example1_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example1_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr30</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/iar/startup_samr30.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr30_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example1</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick_sam.c</name>
+						</file>
+						<group>
+							<name>samr30g18a_samr30_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../time_tick.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example1/time_tick.h b/common2/components/memory/sd_mmc/example1/time_tick.h
new file mode 100644
index 00000000..7aa8e468
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/time_tick.h
@@ -0,0 +1,72 @@
+/**
+ * \file
+ *
+ * \brief Time tick functions
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef TIME_TICK_H_INCLUDED
+#define TIME_TICK_H_INCLUDED
+
+/**
+ * \brief Initialize for 1ms time tick.
+ *
+ * \return \c true if initialization is OK, else \c false.
+ */
+void time_tick_init(void);
+
+/**
+ * \brief Get current time tick.
+ */
+uint32_t time_tick_get(void);
+
+/**
+ * \brief Calculate the delay (ms) between two ticks.
+ *
+ * \param tick_start Start tick number.
+ * \param tick_end   End tick number.
+ *
+ * \return the timing in ms between the both ticks
+ */
+uint32_t time_tick_calc_delay(uint32_t tick_start, uint32_t tick_end);
+
+#endif /* TIME_TICK_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example1/time_tick_sam.c b/common2/components/memory/sd_mmc/example1/time_tick_sam.c
new file mode 100644
index 00000000..e8fb14a3
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example1/time_tick_sam.c
@@ -0,0 +1,88 @@
+/**
+ * \file
+ *
+ * \brief Time tick for SAM.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "asf.h"
+#include "time_tick.h"
+
+/** Counts for 1ms time ticks. */
+volatile uint32_t g_ms_ticks = 0;
+
+#define TICK_MS 1000
+/**
+ * \brief Handler for Sytem Tick interrupt.
+ *
+ * Process System Tick Event
+ * Increments the g_ms_ticks counter.
+ */
+void SysTick_Handler(void)
+{
+	g_ms_ticks++;
+}
+
+void time_tick_init(void)
+{
+	g_ms_ticks = 0;
+
+	/* Configure systick */
+	if (SysTick_Config(system_gclk_gen_get_hz(0) / TICK_MS)) {
+		Assert(false);
+	}
+}
+
+uint32_t time_tick_get(void)
+{
+	return g_ms_ticks;
+}
+
+uint32_t time_tick_calc_delay(uint32_t tick_start, uint32_t tick_end)
+{
+	if (tick_end >= tick_start) {
+		return (tick_end - tick_start);
+	} else {
+		/* In the case of 32-bit couter number overflow */
+		return (tick_end + (0xFFFFFFFF - tick_start));
+	}
+}
diff --git a/common2/components/memory/sd_mmc/example2/conf_access.h b/common2/components/memory/sd_mmc/example2/conf_access.h
new file mode 100644
index 00000000..dd652923
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/conf_access.h
@@ -0,0 +1,170 @@
+/**
+ * \file
+ *
+ * \brief Memory access control configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _CONF_ACCESS_H_
+#define _CONF_ACCESS_H_
+
+#include "compiler.h"
+#include "board.h"
+
+
+/*! \name Activation of Logical Unit Numbers
+ */
+//! @{
+#define LUN_0                DISABLE   //!< On-Chip Virtual Memory.
+#define LUN_1                DISABLE   //!< AT45DBX Data Flash.
+#define LUN_2                ENABLE    //!< SD/MMC Card over Slot 0
+#define LUN_3                DISABLE   //!< Spare
+#define LUN_4                DISABLE   //!< Spare
+#define LUN_5                DISABLE   //!< Spare
+#define LUN_6                DISABLE   //!< Spare
+#define LUN_7                DISABLE   //!< Spare
+#define LUN_USB              DISABLE   //!< Host Mass-Storage Memory.
+//! @}
+
+/*! \name LUN 0 Definitions
+ */
+//! @{
+#define VIRTUAL_MEM                             LUN_0
+#define LUN_ID_VIRTUAL_MEM                      LUN_ID_0
+#define LUN_0_INCLUDE                           "virtual_mem.h"
+#define Lun_0_test_unit_ready                   virtual_test_unit_ready
+#define Lun_0_read_capacity                     virtual_read_capacity
+#define Lun_0_unload                            NULL /* Can not be unloaded */
+#define Lun_0_wr_protect                        virtual_wr_protect
+#define Lun_0_removal                           virtual_removal
+#define Lun_0_usb_read_10                       virtual_usb_read_10
+#define Lun_0_usb_write_10                      virtual_usb_write_10
+#define Lun_0_mem_2_ram                         virtual_mem_2_ram
+#define Lun_0_ram_2_mem                         virtual_ram_2_mem
+#define LUN_0_NAME                              "\"On-Chip Virtual Memory\""
+//! @}
+
+/*! \name LUN 1 Definitions
+ */
+//! @{
+#define AT45DBX_MEM                             LUN_1
+#define LUN_ID_AT45DBX_MEM                      LUN_ID_1
+#define LUN_1_INCLUDE                           "at45dbx_mem.h"
+#define Lun_1_test_unit_ready                   at45dbx_test_unit_ready
+#define Lun_1_read_capacity                     at45dbx_read_capacity
+#define Lun_1_unload                            NULL /* Can not be unloaded */
+#define Lun_1_wr_protect                        at45dbx_wr_protect
+#define Lun_1_removal                           at45dbx_removal
+#define Lun_1_usb_read_10                       at45dbx_usb_read_10
+#define Lun_1_usb_write_10                      at45dbx_usb_write_10
+#define Lun_1_mem_2_ram                         at45dbx_df_2_ram
+#define Lun_1_ram_2_mem                         at45dbx_ram_2_df
+#define LUN_1_NAME                              "\"AT45DBX Data Flash\""
+//! @}
+
+/*! \name LUN 2 Definitions
+ */
+//! @{
+#define SD_MMC_0_MEM                            LUN_2
+#define LUN_ID_SD_MMC_0_MEM                     LUN_ID_2
+#define LUN_2_INCLUDE                           "sd_mmc_mem.h"
+#define Lun_2_test_unit_ready                   sd_mmc_test_unit_ready_0
+#define Lun_2_read_capacity                     sd_mmc_read_capacity_0
+#define Lun_2_unload                            sd_mmc_unload_0
+#define Lun_2_wr_protect                        sd_mmc_wr_protect_0
+#define Lun_2_removal                           sd_mmc_removal_0
+#define Lun_2_usb_read_10                       sd_mmc_usb_read_10_0
+#define Lun_2_usb_write_10                      sd_mmc_usb_write_10_0
+#define Lun_2_mem_2_ram                         sd_mmc_mem_2_ram_0
+#define Lun_2_ram_2_mem                         sd_mmc_ram_2_mem_0
+#define LUN_2_NAME                              "\"SD/MMC Card Slot 0\""
+//! @}
+
+/*! \name USB LUNs Definitions
+ */
+//! @{
+#define MEM_USB                                 LUN_USB
+#define LUN_ID_MEM_USB                          LUN_ID_USB
+#define LUN_USB_INCLUDE                         "uhi_msc_mem.h"
+#define Lun_usb_get_lun()                       uhi_msc_mem_get_lun()
+#define Lun_usb_test_unit_ready(lun)            uhi_msc_mem_test_unit_ready(lun)
+#define Lun_usb_read_capacity(lun, nb_sect)     uhi_msc_mem_read_capacity(lun, nb_sect)
+#define Lun_usb_read_sector_size(lun)           uhi_msc_mem_read_sector_size(lun)
+#define Lun_usb_wr_protect(lun)                 uhi_msc_mem_wr_protect(lun)
+#define Lun_usb_removal()                       uhi_msc_mem_removal()
+#define Lun_usb_mem_2_ram(addr, ram)            uhi_msc_mem_read_10_ram(addr, ram)
+#define Lun_usb_ram_2_mem(addr, ram)            uhi_msc_mem_write_10_ram(addr, ram)
+#define LUN_USB_NAME                            "\"Host Mass-Storage Memory\""
+//! @}
+
+/*! \name Actions Associated with Memory Accesses
+ *
+ * Write here the action to associate with each memory access.
+ *
+ * \warning Be careful not to waste time in order not to disturb the functions.
+ */
+//! @{
+#define memory_start_read_action(nb_sectors)
+#define memory_stop_read_action()
+#define memory_start_write_action(nb_sectors)
+#define memory_stop_write_action()
+//! @}
+
+/*! \name Activation of Interface Features
+ */
+//! @{
+#define ACCESS_USB           false   //!< MEM <-> USB interface.
+#define ACCESS_MEM_TO_RAM    true    //!< MEM <-> RAM interface.
+#define ACCESS_STREAM        false   //!< Streaming MEM <-> MEM interface.
+#define ACCESS_STREAM_RECORD false   //!< Streaming MEM <-> MEM interface in record mode.
+#define ACCESS_MEM_TO_MEM    false   //!< MEM <-> MEM interface.
+#define ACCESS_CODEC         false   //!< Codec interface.
+//! @}
+
+/*! \name Specific Options for Access Control
+ */
+//! @{
+#define GLOBAL_WR_PROTECT    false   //!< Management of a global write protection.
+//! @}
+
+
+#endif // _CONF_ACCESS_H_
diff --git a/common2/components/memory/sd_mmc/example2/conf_fatfs.h b/common2/components/memory/sd_mmc/example2/conf_fatfs.h
new file mode 100644
index 00000000..7715930b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/conf_fatfs.h
@@ -0,0 +1,240 @@
+/**
+ * \file
+ *
+ * \brief FATFS configuration file.
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_FATFS_H_INCLUDED
+#define CONF_FATFS_H_INCLUDED
+
+/*---------------------------------------------------------------------------/
+/  FatFs - FAT file system module configuration file  R0.09  (C)ChaN, 2011
+/----------------------------------------------------------------------------/
+/
+/ CAUTION! Do not forget to make clean the project after any changes to
+/ the configuration options.
+/
+/----------------------------------------------------------------------------*/
+#ifndef _FFCONF
+#define _FFCONF 6502    /* Revision ID */
+
+
+/*---------------------------------------------------------------------------/
+/ Functions and Buffer Configurations
+/----------------------------------------------------------------------------*/
+
+#define    _FS_TINY        1    /* 0:Normal or 1:Tiny */
+/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
+/  object instead of the sector buffer in the individual file object for file
+/  data transfer. This reduces memory consumption 512 bytes each file object. */
+
+
+#define _FS_READONLY    0    /* 0:Read/Write or 1:Read only */
+/* Setting _FS_READONLY to 1 defines read only configuration. This removes
+/  writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
+/  f_truncate and useless f_getfree. */
+
+
+#define _FS_MINIMIZE    0    /* 0 to 3 */
+/* The _FS_MINIMIZE option defines minimization level to remove some functions.
+/
+/   0: Full function.
+/   1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename
+/      are removed.
+/   2: f_opendir and f_readdir are removed in addition to 1.
+/   3: f_lseek is removed in addition to 2. */
+
+
+#define    _USE_STRFUNC    1    /* 0:Disable or 1-2:Enable */
+/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
+
+
+#define    _USE_MKFS    1        /* 0:Disable or 1:Enable */
+/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
+
+
+#define    _USE_FORWARD    0    /* 0:Disable or 1:Enable */
+/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
+
+
+#define    _USE_FASTSEEK    0    /* 0:Disable or 1:Enable */
+/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/----------------------------------------------------------------------------*/
+
+#define _CODE_PAGE    850
+/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
+/  Incorrect setting of the code page can cause a file open failure.
+/
+/   932  - Japanese Shift-JIS (DBCS, OEM, Windows)
+/   936  - Simplified Chinese GBK (DBCS, OEM, Windows)
+/   949  - Korean (DBCS, OEM, Windows)
+/   950  - Traditional Chinese Big5 (DBCS, OEM, Windows)
+/   1250 - Central Europe (Windows)
+/   1251 - Cyrillic (Windows)
+/   1252 - Latin 1 (Windows)
+/   1253 - Greek (Windows)
+/   1254 - Turkish (Windows)
+/   1255 - Hebrew (Windows)
+/   1256 - Arabic (Windows)
+/   1257 - Baltic (Windows)
+/   1258 - Vietnam (OEM, Windows)
+/   437  - U.S. (OEM)
+/   720  - Arabic (OEM)
+/   737  - Greek (OEM)
+/   775  - Baltic (OEM)
+/   850  - Multilingual Latin 1 (OEM)
+/   858  - Multilingual Latin 1 + Euro (OEM)
+/   852  - Latin 2 (OEM)
+/   855  - Cyrillic (OEM)
+/   866  - Russian (OEM)
+/   857  - Turkish (OEM)
+/   862  - Hebrew (OEM)
+/   874  - Thai (OEM, Windows)
+/    1    - ASCII only (Valid for non LFN cfg.)
+*/
+
+
+#define    _USE_LFN    2        /* 0 to 3 */
+#define    _MAX_LFN    255        /* Maximum LFN length to handle (12 to 255) */
+/* The _USE_LFN option switches the LFN support.
+/
+/   0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect.
+/   1: Enable LFN with static working buffer on the BSS. Always NOT reentrant.
+/   2: Enable LFN with dynamic working buffer on the STACK.
+/   3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/  The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN,
+/  Unicode handling functions ff_convert() and ff_wtoupper() must be added
+/  to the project. When enable to use heap, memory control functions
+/  ff_memalloc() and ff_memfree() must be added to the project. */
+
+
+#define    _LFN_UNICODE    0    /* 0:ANSI/OEM or 1:Unicode */
+/* To switch the character code set on FatFs API to Unicode,
+/  enable LFN feature and set _LFN_UNICODE to 1. */
+
+
+#define _FS_RPATH        0    /* 0 to 2 */
+/* The _FS_RPATH option configures relative path feature.
+/
+/   0: Disable relative path feature and remove related functions.
+/   1: Enable relative path. f_chdrive() and f_chdir() are available.
+/   2: f_getcwd() is available in addition to 1.
+/
+/  Note that output of the f_readdir function is affected by this option. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ Physical Drive Configurations
+/----------------------------------------------------------------------------*/
+
+#define    _VOLUMES       8
+/* Number of volumes (logical drives) to be used. */
+
+
+#define    _MAX_SS        512        /* 512, 1024, 2048 or 4096 */
+/* Maximum sector size to be handled.
+/  Always set 512 for memory card and hard disk but a larger value may be
+/  required for on-board flash memory, floppy disk and optical disk.
+/  When _MAX_SS is larger than 512, it configures FatFs to variable sector size
+/  and GET_SECTOR_SIZE command must be implemented to the disk_ioctl function. */
+
+
+#define    _MULTI_PARTITION    0    /* 0:Single partition, 1/2:Enable multiple partition */
+/* When set to 0, each volume is bound to the same physical drive number and
+/ it can mount only first primary partition. When it is set to 1, each volume
+/ is tied to the partitions listed in VolToPart[]. */
+
+
+#define    _USE_ERASE    0    /* 0:Disable or 1:Enable */
+/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command
+/  should be added to the disk_ioctl function. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/----------------------------------------------------------------------------*/
+
+#define _WORD_ACCESS    0    /* 0 or 1 */
+/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS
+/  option defines which access method is used to the word data on the FAT volume.
+/
+/   0: Byte-by-byte access.
+/   1: Word access. Do not choose this unless the following condition is met.
+/
+/  When the byte order on the memory is big-endian or address miss-aligned word
+/  access results incorrect behavior, the _WORD_ACCESS must be set to 0.
+/  If it is not the case, the value can also be set to 1 to improve the
+/  performance and code size.
+*/
+
+
+/* A header file that defines sync object types on the O/S, such as
+/  windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */
+
+#define _FS_REENTRANT    0        /* 0:Disable or 1:Enable */
+#define _FS_TIMEOUT        1000    /* Timeout period in unit of time ticks */
+#define    _SYNC_t            HANDLE    /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
+
+/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module.
+/
+/   0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect.
+/   1: Enable reentrancy. Also user provided synchronization handlers,
+/      ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj
+/      functions must be added to the project. */
+
+
+#define    _FS_SHARE    0    /* 0:Disable or >=1:Enable */
+/* To enable file sharing feature, set _FS_SHARE to 1 or greater. The value
+   defines how many files can be opened simultaneously. */
+
+#endif /* _FFCONF */
+
+#endif /* CONF_FATFS_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/example.c b/common2/components/memory/sd_mmc/example2/example.c
new file mode 100644
index 00000000..f3246841
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/example.c
@@ -0,0 +1,181 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC card example with FatFs
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \mainpage SD/MMC Card with FatFs Example
+ *
+ * \section Purpose
+ *
+ * This example shows how to implement the SD/MMC stack with the FatFS.
+ * It will mount the file system and write a file in the card.
+ *
+ * The example outputs the information through the standard output (stdio).
+ * To know the output used on the board, look in the conf_example.h file
+ * and connect a terminal to the correct port.
+ *
+ * While using Xplained Pro evaluation kits, please attach I/O1 Xplained Pro
+ * extension board to EXT1.
+ *
+ * \section Usage
+ *
+ * -# Build the program and download it into the board.
+ * -# On the computer, open and configure a terminal application.
+ * Refert to conf_example.h file.
+ * -# Start the application.
+ * -# In the terminal window, the following text should appear:
+ *    \code
+ *     -- SD/MMC Card Example on FatFs --
+ *     -- Compiled: xxx xx xxxx xx:xx:xx --
+ *     Please plug an SD, MMC card in slot.
+ *    \endcode
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include "conf_example.h"
+#include <string.h>
+
+//! Structure for UART module connected to EDBG (used for unit test output)
+struct usart_module cdc_uart_module;
+
+/**
+ * \brief Initialize the USART for output
+ *
+ * Initializes the SERCOM USART used for sending the output to the
+ * computer via the EDBG CDC gateway.
+ */
+static void cdc_uart_init(void)
+{
+	struct usart_config usart_conf;
+
+	/* Configure USART for unit test output */
+	usart_get_config_defaults(&usart_conf);
+	usart_conf.mux_setting = CONF_STDIO_MUX_SETTING;
+	usart_conf.pinmux_pad0 = CONF_STDIO_PINMUX_PAD0;
+	usart_conf.pinmux_pad1 = CONF_STDIO_PINMUX_PAD1;
+	usart_conf.pinmux_pad2 = CONF_STDIO_PINMUX_PAD2;
+	usart_conf.pinmux_pad3 = CONF_STDIO_PINMUX_PAD3;
+	usart_conf.baudrate    = CONF_STDIO_BAUDRATE;
+
+	stdio_serial_init(&cdc_uart_module, CONF_STDIO_USART, &usart_conf);
+	usart_enable(&cdc_uart_module);
+}
+
+/**
+ * \brief Application entry point.
+ *
+ * \return Unused (ANSI-C compatibility).
+ */
+int main(void)
+{
+	char test_file_name[] = "0:sd_mmc_test.txt";
+	Ctrl_status status;
+	FRESULT res;
+	FATFS fs;
+	FIL file_object;
+
+	system_init();
+	delay_init();
+	cdc_uart_init();
+
+
+	irq_initialize_vectors();
+	cpu_irq_enable();
+
+	/* Initialize SD MMC stack */
+	sd_mmc_init();
+
+	printf("\x0C\n\r-- SD/MMC Card Example on FatFs --\n\r");
+	printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
+	while (1) {
+		printf("Please plug an SD/MMC card in slot.\n\r");
+
+		/* Wait card present and ready */
+		do {
+			status = sd_mmc_test_unit_ready(0);
+			if (CTRL_FAIL == status) {
+				printf("Card install FAIL\n\r");
+				printf("Please unplug and re-plug the card.\n\r");
+				while (CTRL_NO_PRESENT != sd_mmc_check(0)) {
+				}
+			}
+		} while (CTRL_GOOD != status);
+
+		printf("Mount disk (f_mount)...\r\n");
+		memset(&fs, 0, sizeof(FATFS));
+		res = f_mount(LUN_ID_SD_MMC_0_MEM, &fs);
+		if (FR_INVALID_DRIVE == res) {
+			printf("[FAIL] res %d\r\n", res);
+			goto main_end_of_test;
+		}
+		printf("[OK]\r\n");
+
+		printf("Create a file (f_open)...\r\n");
+		test_file_name[0] = LUN_ID_SD_MMC_0_MEM + '0';
+		res = f_open(&file_object,
+				(char const *)test_file_name,
+				FA_CREATE_ALWAYS | FA_WRITE);
+		if (res != FR_OK) {
+			printf("[FAIL] res %d\r\n", res);
+			goto main_end_of_test;
+		}
+		printf("[OK]\r\n");
+
+		printf("Write to test file (f_puts)...\r\n");
+		if (0 == f_puts("Test SD/MMC stack\n", &file_object)) {
+			f_close(&file_object);
+			printf("[FAIL]\r\n");
+			goto main_end_of_test;
+		}
+		printf("[OK]\r\n");
+		f_close(&file_object);
+		printf("Test is successful.\n\r");
+
+main_end_of_test:
+		printf("Please unplug the card.\n\r");
+		while (CTRL_NO_PRESENT != sd_mmc_check(0)) {
+		}
+	}
+}
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..56f4ec6f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..0a3a68a9
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,172 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..4550ab7d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC card example with FatFs for SAMD20 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE USART_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../sd_mmc_mem.c ../../../../../../../common/services/storage/ctrl_access/ctrl_access.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c ../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../sam0/boards/samd20_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../conf_access.h ../../conf_fatfs.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_mem.h ../../../../../../../common/services/storage/ctrl_access/ctrl_access.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h ../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h ../../../../../../../sam0/drivers/rtc/rtc_calendar.h ../../../../../../../sam0/drivers/rtc/rtc_tamper.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../.. ../../../../../../../common/services/storage/ctrl_access ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd20/include ../../../../../../../sam0/utils/cmsis/samd20/source ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd20 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0 ../../../../../../../sam0/drivers/rtc ../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd20_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SD_MMC_ENABLE SPI_CALLBACK_MODE=true ARM_MATH_CM0PLUS=true CYCLE_MODE RTC_CALENDAR_ASYNC=false USART_CALLBACK_MODE=true BOARD=SAMD20_XPLAINED_PRO __SAMD20J18__ __SAMD20J18__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..41bcbd16
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..51ac3175
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc/config.mk
@@ -0,0 +1,193 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example2_flash.elf
+TARGET_SRAM = sd_mmc_example2_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/services/storage/ctrl_access/ctrl_access.c  \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example2/example.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_mem.c      \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c      \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c                 \
+       thirdparty/fatfs/fatfs-port-r0.09/diskio.c         \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c \
+       thirdparty/fatfs/fatfs-r0.09/src/ff.c              \
+       thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/services/storage/ctrl_access                \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example2          \
+       common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/rtc                                   \
+       sam0/drivers/rtc/rtc_sam_d_r_h                     \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC                           \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0             \
+       thirdparty/fatfs/fatfs-r0.09/src \
+       common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D RTC_CALENDAR_ASYNC=false                        \
+       -D SD_MMC_ENABLE                                   \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..41bcbd16
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2.eww b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2.eww
new file mode 100644
index 00000000..c2d4278e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example2_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2_flash.ewd b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2_flash.ewd
new file mode 100644
index 00000000..7e71700b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2_flash.ewp b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2_flash.ewp
new file mode 100644
index 00000000..381deec7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd20j18_samd20_xplained_pro/iar/sd_mmc_example2_flash.ewp
@@ -0,0 +1,2799 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd20</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>rtc</name>
+				<group>
+					<name>rtc_sam_d_r_h</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_tamper.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_calendar.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd20_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example2</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../conf_fatfs.h</name>
+						</file>
+						<group>
+							<name>samd20j18_samd20_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../conf_access.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>thirdparty</name>
+		<group>
+			<name>fatfs</name>
+			<group>
+				<name>fatfs-r0.09</name>
+				<group>
+					<name>src</name>
+					<group>
+						<name>option</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>fatfs-port-r0.09</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>storage</name>
+				<group>
+					<name>ctrl_access</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..ad644c05
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..a0ee3392
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         true
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               false
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          true
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        true
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..d58c69a4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC card example with FatFs for SAMD21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE USART_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../sd_mmc_mem.c ../../../../../../../common/services/storage/ctrl_access/ctrl_access.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c ../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../conf_access.h ../../conf_fatfs.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_mem.h ../../../../../../../common/services/storage/ctrl_access/ctrl_access.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h ../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h ../../../../../../../sam0/drivers/rtc/rtc_calendar.h ../../../../../../../sam0/drivers/rtc/rtc_tamper.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../.. ../../../../../../../common/services/storage/ctrl_access ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd21/include ../../../../../../../sam0/utils/cmsis/samd21/source ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0 ../../../../../../../sam0/drivers/rtc ../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SD_MMC_ENABLE SPI_CALLBACK_MODE=true ARM_MATH_CM0PLUS=true CYCLE_MODE RTC_CALENDAR_ASYNC=false USART_CALLBACK_MODE=true BOARD=SAMD21_XPLAINED_PRO __SAMD21J18A__ __SAMD21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..98a0edc8
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..179a8a21
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc/config.mk
@@ -0,0 +1,193 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example2_flash.elf
+TARGET_SRAM = sd_mmc_example2_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/services/storage/ctrl_access/ctrl_access.c  \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example2/example.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_mem.c      \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c      \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c                 \
+       thirdparty/fatfs/fatfs-port-r0.09/diskio.c         \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c \
+       thirdparty/fatfs/fatfs-r0.09/src/ff.c              \
+       thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/services/storage/ctrl_access                \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example2          \
+       common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/rtc                                   \
+       sam0/drivers/rtc/rtc_sam_d_r_h                     \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC                           \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0             \
+       thirdparty/fatfs/fatfs-r0.09/src \
+       common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D RTC_CALENDAR_ASYNC=false                        \
+       -D SD_MMC_ENABLE                                   \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..98a0edc8
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2.eww b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2.eww
new file mode 100644
index 00000000..c2d4278e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example2_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2_flash.ewd b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2_flash.ewd
new file mode 100644
index 00000000..451f82ab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2_flash.ewp b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2_flash.ewp
new file mode 100644
index 00000000..6acb1f2d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samd21j18a_samd21_xplained_pro/iar/sd_mmc_example2_flash.ewp
@@ -0,0 +1,2838 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example2</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../conf_fatfs.h</name>
+						</file>
+						<group>
+							<name>samd21j18a_samd21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../conf_access.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>thirdparty</name>
+		<group>
+			<name>fatfs</name>
+			<group>
+				<name>fatfs-r0.09</name>
+				<group>
+					<name>src</name>
+					<group>
+						<name>option</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>fatfs-port-r0.09</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>rtc</name>
+				<group>
+					<name>rtc_sam_d_r_h</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_tamper.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_calendar.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>storage</name>
+				<group>
+					<name>ctrl_access</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..667fac38
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_rtc.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_rtc.h
new file mode 100644
index 00000000..f855502c
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_rtc.h
@@ -0,0 +1,54 @@
+/**
+ * \file
+ *
+ * \brief SAM RTC Driver Configuration Header
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_RTC_H_INCLUDED
+#define CONF_RTC_H_INCLUDED
+
+/** Select RTC clock. Use 1.024kHz from 32kHz internal ULP oscillator(OSCULP32K)
+ *  for RTC clock.
+ */
+#  define RTC_CLOCK_SOURCE    RTC_CLOCK_SELECTION_ULP1K
+
+#endif
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..649f221c
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC card example with FatFs for SAML21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE USART_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../sd_mmc_mem.c ../../../../../../../common/services/storage/ctrl_access/ctrl_access.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../sam0/boards/saml21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_rtc.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../conf_access.h ../../conf_fatfs.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_mem.h ../../../../../../../common/services/storage/ctrl_access/ctrl_access.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h ../../../../../../../sam0/drivers/rtc/rtc_calendar.h ../../../../../../../sam0/drivers/rtc/rtc_tamper.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../.. ../../../../../../../common/services/storage/ctrl_access ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml21/include ../../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0 ../../../../../../../sam0/drivers/rtc ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SD_MMC_ENABLE SPI_CALLBACK_MODE=true ARM_MATH_CM0PLUS=true CYCLE_MODE RTC_CALENDAR_ASYNC=false USART_CALLBACK_MODE=true BOARD=SAML21_XPLAINED_PRO __SAML21J18A__ __SAML21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..ca32da86
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..6c9f8504
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,193 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example2_flash.elf
+TARGET_SRAM = sd_mmc_example2_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/services/storage/ctrl_access/ctrl_access.c  \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example2/example.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_mem.c      \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c        \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c                 \
+       thirdparty/fatfs/fatfs-port-r0.09/diskio.c         \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c \
+       thirdparty/fatfs/fatfs-r0.09/src/ff.c              \
+       thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/services/storage/ctrl_access                \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example2          \
+       common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/rtc                                   \
+       sam0/drivers/rtc/rtc_sam_l_c                       \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include                    \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC                           \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0             \
+       thirdparty/fatfs/fatfs-r0.09/src \
+       common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D RTC_CALENDAR_ASYNC=false                        \
+       -D SD_MMC_ENABLE                                   \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAML21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..ca32da86
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2.eww b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2.eww
new file mode 100644
index 00000000..c2d4278e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example2_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewd b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewd
new file mode 100644
index 00000000..250c73cf
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewp b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewp
new file mode 100644
index 00000000..cfb9ed56
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18a_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewp
@@ -0,0 +1,2733 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>__SAML21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>__SAML21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>__SAML21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>__SAML21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h</name>
+							</file>
+						</group>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>rtc</name>
+				<group>
+					<name>rtc_sam_l_c</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_tamper.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_calendar.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example2</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../conf_fatfs.h</name>
+						</file>
+						<group>
+							<name>saml21j18a_saml21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../conf_access.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>thirdparty</name>
+		<group>
+			<name>fatfs</name>
+			<group>
+				<name>fatfs-r0.09</name>
+				<group>
+					<name>src</name>
+					<group>
+						<name>option</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>fatfs-port-r0.09</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>storage</name>
+				<group>
+					<name>ctrl_access</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..a439e52c
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,201 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_rtc.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_rtc.h
new file mode 100644
index 00000000..f855502c
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_rtc.h
@@ -0,0 +1,54 @@
+/**
+ * \file
+ *
+ * \brief SAM RTC Driver Configuration Header
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_RTC_H_INCLUDED
+#define CONF_RTC_H_INCLUDED
+
+/** Select RTC clock. Use 1.024kHz from 32kHz internal ULP oscillator(OSCULP32K)
+ *  for RTC clock.
+ */
+#  define RTC_CLOCK_SOURCE    RTC_CLOCK_SELECTION_ULP1K
+
+#endif
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..1de8bce5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC card example with FatFs for SAML21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE USART_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../sd_mmc_mem.c ../../../../../../../common/services/storage/ctrl_access/ctrl_access.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_rtc.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../conf_access.h ../../conf_fatfs.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_mem.h ../../../../../../../common/services/storage/ctrl_access/ctrl_access.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h ../../../../../../../sam0/drivers/rtc/rtc_calendar.h ../../../../../../../sam0/drivers/rtc/rtc_tamper.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../.. ../../../../../../../common/services/storage/ctrl_access ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml21/include_b ../../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0 ../../../../../../../sam0/drivers/rtc ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml21_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SD_MMC_ENABLE SPI_CALLBACK_MODE=true ARM_MATH_CM0PLUS=true CYCLE_MODE RTC_CALENDAR_ASYNC=false USART_CALLBACK_MODE=true BOARD=SAML21_XPLAINED_PRO __SAML21J18B__ __SAML21J18B__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..ca32da86
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..b3bb75ef
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,193 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18b
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example2_flash.elf
+TARGET_SRAM = sd_mmc_example2_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/services/storage/ctrl_access/ctrl_access.c  \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example2/example.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_mem.c      \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml21_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c        \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c                 \
+       thirdparty/fatfs/fatfs-port-r0.09/diskio.c         \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c \
+       thirdparty/fatfs/fatfs-r0.09/src/ff.c              \
+       thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/services/storage/ctrl_access                \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example2          \
+       common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/rtc                                   \
+       sam0/drivers/rtc/rtc_sam_l_c                       \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include_b                  \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC                           \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0             \
+       thirdparty/fatfs/fatfs-r0.09/src \
+       common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D RTC_CALENDAR_ASYNC=false                        \
+       -D SD_MMC_ENABLE                                   \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAML21J18B__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..ca32da86
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2.eww b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2.eww
new file mode 100644
index 00000000..c2d4278e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example2_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewd b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewd
new file mode 100644
index 00000000..2bca7a88
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18b-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewp b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewp
new file mode 100644
index 00000000..8ccfbca2
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml21j18b_saml21_xplained_pro/iar/sd_mmc_example2_flash.ewp
@@ -0,0 +1,2775 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include_b</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>rtc</name>
+				<group>
+					<name>rtc_sam_l_c</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_tamper.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_calendar.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example2</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../conf_fatfs.h</name>
+						</file>
+						<group>
+							<name>saml21j18b_saml21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../conf_access.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>thirdparty</name>
+		<group>
+			<name>fatfs</name>
+			<group>
+				<name>fatfs-r0.09</name>
+				<group>
+					<name>src</name>
+					<group>
+						<name>option</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>fatfs-port-r0.09</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>storage</name>
+				<group>
+					<name>ctrl_access</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7603e0e7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_rtc.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_rtc.h
new file mode 100644
index 00000000..eb6bf552
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_rtc.h
@@ -0,0 +1,54 @@
+/**
+ * \file
+ *
+ * \brief SAM RTC Driver Configuration Header
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_RTC_H_INCLUDED
+#define CONF_RTC_H_INCLUDED
+
+/** Select RTC clock. Use 1.024kHz from 32kHz internal ULP oscillator(OSCULP32K)
+ *  for RTC clock.
+ */
+#  define RTC_CLOCK_SOURCE    RTC_CLOCK_SELECTION_ULP1K
+
+#endif
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..7a526ec5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..1f61b945
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..49463d41
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC card example with FatFs for SAML22 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE USART_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../sd_mmc_mem.c ../../../../../../../common/services/storage/ctrl_access/ctrl_access.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_rtc.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../conf_access.h ../../conf_fatfs.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_mem.h ../../../../../../../common/services/storage/ctrl_access/ctrl_access.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h ../../../../../../../sam0/drivers/rtc/rtc_calendar.h ../../../../../../../sam0/drivers/rtc/rtc_tamper.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../.. ../../../../../../../common/services/storage/ctrl_access ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0 ../../../../../../../sam0/drivers/rtc ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SD_MMC_ENABLE SPI_CALLBACK_MODE=true ARM_MATH_CM0PLUS=true CYCLE_MODE RTC_CALENDAR_ASYNC=false USART_CALLBACK_MODE=true BOARD=SAML22_XPLAINED_PRO __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..83388b7d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..ec5bba00
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc/config.mk
@@ -0,0 +1,193 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example2_flash.elf
+TARGET_SRAM = sd_mmc_example2_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/services/storage/ctrl_access/ctrl_access.c  \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example2/example.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_mem.c      \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml22_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c        \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c                 \
+       thirdparty/fatfs/fatfs-port-r0.09/diskio.c         \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c \
+       thirdparty/fatfs/fatfs-r0.09/src/ff.c              \
+       thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/services/storage/ctrl_access                \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example2          \
+       common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/rtc                                   \
+       sam0/drivers/rtc/rtc_sam_l_c                       \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC                           \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0             \
+       thirdparty/fatfs/fatfs-r0.09/src \
+       common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D RTC_CALENDAR_ASYNC=false                        \
+       -D SD_MMC_ENABLE                                   \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..83388b7d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2.eww b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2.eww
new file mode 100644
index 00000000..c2d4278e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example2_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2_flash.ewd b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2_flash.ewd
new file mode 100644
index 00000000..03c7016f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2_flash.ewp b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2_flash.ewp
new file mode 100644
index 00000000..ccb6c8f3
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro/iar/sd_mmc_example2_flash.ewp
@@ -0,0 +1,2760 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example2</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../conf_fatfs.h</name>
+						</file>
+						<group>
+							<name>saml22n18a_saml22_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../conf_access.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>thirdparty</name>
+		<group>
+			<name>fatfs</name>
+			<group>
+				<name>fatfs-r0.09</name>
+				<group>
+					<name>src</name>
+					<group>
+						<name>option</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>fatfs-port-r0.09</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>rtc</name>
+				<group>
+					<name>rtc_sam_l_c</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_tamper.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_calendar.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>storage</name>
+				<group>
+					<name>ctrl_access</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_board.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_clocks.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_example.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_example.h
new file mode 100644
index 00000000..7603e0e7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_rtc.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_rtc.h
new file mode 100644
index 00000000..eb6bf552
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_rtc.h
@@ -0,0 +1,54 @@
+/**
+ * \file
+ *
+ * \brief SAM RTC Driver Configuration Header
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_RTC_H_INCLUDED
+#define CONF_RTC_H_INCLUDED
+
+/** Select RTC clock. Use 1.024kHz from 32kHz internal ULP oscillator(OSCULP32K)
+ *  for RTC clock.
+ */
+#  define RTC_CLOCK_SOURCE    RTC_CLOCK_SELECTION_ULP1K
+
+#endif
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h
new file mode 100644
index 00000000..7a526ec5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h
new file mode 100644
index 00000000..1f61b945
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_spi.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..41b2ce0d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC card example with FatFs for SAML22 Xplained Pro B"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE USART_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../sd_mmc_mem.c ../../../../../../../common/services/storage/ctrl_access/ctrl_access.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_rtc.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../conf_access.h ../../conf_fatfs.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_mem.h ../../../../../../../common/services/storage/ctrl_access/ctrl_access.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h ../../../../../../../sam0/drivers/rtc/rtc_calendar.h ../../../../../../../sam0/drivers/rtc/rtc_tamper.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../.. ../../../../../../../common/services/storage/ctrl_access ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0 ../../../../../../../sam0/drivers/rtc ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SD_MMC_ENABLE SPI_CALLBACK_MODE=true ARM_MATH_CM0PLUS=true CYCLE_MODE RTC_CALENDAR_ASYNC=false USART_CALLBACK_MODE=true BOARD=SAML22_XPLAINED_PRO_B __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/Makefile b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/asf.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..83388b7d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/config.mk b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..5995b768
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,193 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example2_flash.elf
+TARGET_SRAM = sd_mmc_example2_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/services/storage/ctrl_access/ctrl_access.c  \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example2/example.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_mem.c      \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml22_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c        \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c                 \
+       thirdparty/fatfs/fatfs-port-r0.09/diskio.c         \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c \
+       thirdparty/fatfs/fatfs-r0.09/src/ff.c              \
+       thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/services/storage/ctrl_access                \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example2          \
+       common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/rtc                                   \
+       sam0/drivers/rtc/rtc_sam_l_c                       \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC                           \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0             \
+       thirdparty/fatfs/fatfs-r0.09/src \
+       common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO_B                     \
+       -D CYCLE_MODE                                      \
+       -D RTC_CALENDAR_ASYNC=false                        \
+       -D SD_MMC_ENABLE                                   \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/asf.h b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..83388b7d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2.eww b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2.eww
new file mode 100644
index 00000000..c2d4278e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example2_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2_flash.ewd b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2_flash.ewd
new file mode 100644
index 00000000..69c49251
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2_flash.ewp b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2_flash.ewp
new file mode 100644
index 00000000..72d64ba1
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_example2_flash.ewp
@@ -0,0 +1,2760 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example2</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../conf_fatfs.h</name>
+						</file>
+						<group>
+							<name>saml22n18a_saml22_xplained_pro_b</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../conf_access.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>thirdparty</name>
+		<group>
+			<name>fatfs</name>
+			<group>
+				<name>fatfs-r0.09</name>
+				<group>
+					<name>src</name>
+					<group>
+						<name>option</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>fatfs-port-r0.09</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>rtc</name>
+				<group>
+					<name>rtc_sam_l_c</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_tamper.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_calendar.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>storage</name>
+				<group>
+					<name>ctrl_access</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..814b959e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..07e5d6a5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         true
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               false
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          true
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        true
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_example.h
new file mode 100644
index 00000000..7816bdbe
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..b4187ac5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..b1277548
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC card example with FatFs for SAMR21 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE USART_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../sd_mmc_mem.c ../../../../../../../common/services/storage/ctrl_access/ctrl_access.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c ../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../sam0/boards/samr21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_sd_mmc.h ../conf_spi.h ../../conf_access.h ../../conf_fatfs.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_mem.h ../../../../../../../common/services/storage/ctrl_access/ctrl_access.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/port.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h ../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h ../../../../../../../sam0/drivers/rtc/rtc_calendar.h ../../../../../../../sam0/drivers/rtc/rtc_tamper.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../.. ../../../../../../../common/services/storage/ctrl_access ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samr21/include ../../../../../../../sam0/utils/cmsis/samr21/source ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0 ../../../../../../../sam0/drivers/rtc ../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samr21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SD_MMC_ENABLE SPI_CALLBACK_MODE=true ARM_MATH_CM0PLUS=true CYCLE_MODE RTC_CALENDAR_ASYNC=false USART_CALLBACK_MODE=true BOARD=SAMR21_XPLAINED_PRO __SAMR21G18A__ __SAMR21G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..98a0edc8
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..45cd2abc
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc/config.mk
@@ -0,0 +1,193 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr21g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example2_flash.elf
+TARGET_SRAM = sd_mmc_example2_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/services/storage/ctrl_access/ctrl_access.c  \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example2/example.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_mem.c      \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samr21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c      \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr21/source/gcc/startup_samr21.c \
+       sam0/utils/cmsis/samr21/source/system_samr21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c                 \
+       thirdparty/fatfs/fatfs-port-r0.09/diskio.c         \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c \
+       thirdparty/fatfs/fatfs-r0.09/src/ff.c              \
+       thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/services/storage/ctrl_access                \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example2          \
+       common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/rtc                                   \
+       sam0/drivers/rtc/rtc_sam_d_r_h                     \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr21/include                    \
+       sam0/utils/cmsis/samr21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC                           \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0             \
+       thirdparty/fatfs/fatfs-r0.09/src \
+       common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D RTC_CALENDAR_ASYNC=false                        \
+       -D SD_MMC_ENABLE                                   \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAMR21G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..98a0edc8
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2.eww b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2.eww
new file mode 100644
index 00000000..c2d4278e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example2_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2_flash.ewd b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2_flash.ewd
new file mode 100644
index 00000000..4fe70101
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR21\samr21g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2_flash.ewp b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2_flash.ewp
new file mode 100644
index 00000000..782955ef
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr21g18a_samr21_xplained_pro/iar/sd_mmc_example2_flash.ewp
@@ -0,0 +1,2703 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example2</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../conf_fatfs.h</name>
+						</file>
+						<group>
+							<name>samr21g18a_samr21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../conf_access.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>thirdparty</name>
+		<group>
+			<name>fatfs</name>
+			<group>
+				<name>fatfs-r0.09</name>
+				<group>
+					<name>src</name>
+					<group>
+						<name>option</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>fatfs-port-r0.09</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/iar/startup_samr21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>rtc</name>
+				<group>
+					<name>rtc_sam_d_r_h</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_d_r_h/rtc_calendar.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_tamper.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_calendar.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>storage</name>
+				<group>
+					<name>ctrl_access</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_board.h
new file mode 100644
index 00000000..29176c86
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..979269ed
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_example.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_example.h
new file mode 100644
index 00000000..5bc21ede
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_example.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief Example configuration.
+ *
+ * Copyright (c) 2014-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_EXAMPLE_H_INCLUDED
+#define CONF_EXAMPLE_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_EXAMPLE_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_rtc.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_rtc.h
new file mode 100644
index 00000000..68f3b3ed
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_rtc.h
@@ -0,0 +1,54 @@
+/**
+ * \file
+ *
+ * \brief SAM RTC Driver Configuration Header
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_RTC_H_INCLUDED
+#define CONF_RTC_H_INCLUDED
+
+/** Select RTC clock. Use 1.024kHz from 32kHz internal ULP oscillator(OSCULP32K)
+ *  for RTC clock.
+ */
+#  define RTC_CLOCK_SOURCE    RTC_CLOCK_SELECTION_ULP1K
+
+#endif
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..b028bbcc
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT3_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT3_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT3_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT3_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..24e6618d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..f44cac37
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 SPI configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..e9d0686a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SD/MMC card example with FatFs for SAMR30 Xplained Pro"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = SPI_CALLBACK_MODE USART_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../example.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../sd_mmc_mem.c ../../../../../../../common/services/storage/ctrl_access/ctrl_access.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../sam0/boards/samr30_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_example.h ../conf_rtc.h ../conf_sd_mmc.h ../conf_sleepmgr.h ../conf_spi.h ../../conf_access.h ../../conf_fatfs.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_mem.h ../../../../../../../common/services/storage/ctrl_access/ctrl_access.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/port.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h ../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h ../../../../../../../sam0/drivers/rtc/rtc_calendar.h ../../../../../../../sam0/drivers/rtc/rtc_tamper.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/port/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../.. ../../../../../../../common/services/storage/ctrl_access ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samr30/include ../../../../../../../sam0/utils/cmsis/samr30/source ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samr30 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../thirdparty/fatfs/fatfs-r0.09/src ../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0 ../../../../../../../sam0/drivers/rtc ../../../../../../../sam0/drivers/rtc/rtc_sam_l_c ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samr30_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SD_MMC_ENABLE SPI_CALLBACK_MODE=true ARM_MATH_CM0PLUS=true CYCLE_MODE RTC_CALENDAR_ASYNC=false USART_CALLBACK_MODE=true BOARD=SAMR30_XPLAINED_PRO __SAMR30G18A__ __SAMR30G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..ee82b25a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..7a17d2d3
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc/config.mk
@@ -0,0 +1,193 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr30g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_example2_flash.elf
+TARGET_SRAM = sd_mmc_example2_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/services/storage/ctrl_access/ctrl_access.c  \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/sd_mmc/example2/example.c \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_mem.c      \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samr30_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c        \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samr30/clock.c     \
+       sam0/drivers/system/clock/clock_samr30/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr30/source/gcc/startup_samr30.c \
+       sam0/utils/cmsis/samr30/source/system_samr30.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c                 \
+       thirdparty/fatfs/fatfs-port-r0.09/diskio.c         \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c \
+       thirdparty/fatfs/fatfs-r0.09/src/ff.c              \
+       thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/services/storage/ctrl_access                \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/example2          \
+       common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr30_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/rtc                                   \
+       sam0/drivers/rtc/rtc_sam_l_c                       \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samr30             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr30 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr30/include                    \
+       sam0/utils/cmsis/samr30/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC                           \
+       thirdparty/fatfs/fatfs-port-r0.09/sam0             \
+       thirdparty/fatfs/fatfs-r0.09/src \
+       common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR30_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D RTC_CALENDAR_ASYNC=false                        \
+       -D SD_MMC_ENABLE                                   \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D USART_CALLBACK_MODE=true                        \
+       -D __SAMR30G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..ee82b25a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/asf.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: FatFS file system

+#include <diskio.h>

+#include <ff.h>

+#include <ffconf.h>

+#include <integer.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Memory Control Access Interface

+#include <ctrl_access.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: RTC - Real Time Counter in Calendar Mode (Polled APIs)

+#include <rtc_calendar.h>

+#include <rtc_tamper.h>

+

+// From module: SD/MMC Memory Control Access - Enable

+#include <sd_mmc_mem.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: Supported ports of FatFS

+#include <diskio.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2.eww b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2.eww
new file mode 100644
index 00000000..c2d4278e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_example2_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2_flash.ewd b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2_flash.ewd
new file mode 100644
index 00000000..356aca08
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR30\samr30g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2_flash.ewp b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2_flash.ewp
new file mode 100644
index 00000000..8f72a13e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/example2/samr30g18a_samr30_xplained_pro/iar/sd_mmc_example2_flash.ewp
@@ -0,0 +1,2703 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>RTC_CALENDAR_ASYNC=false</state>
+					<state>SD_MMC_ENABLE</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_example2_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_example2_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr30</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/iar/startup_samr30.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>rtc</name>
+				<group>
+					<name>rtc_sam_l_c</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_sam_l_c/rtc_calendar.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_tamper.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/rtc/rtc_calendar.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr30_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>example2</name>
+						<file>
+							<name>$PROJ_DIR$/../../example.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../conf_fatfs.h</name>
+						</file>
+						<group>
+							<name>samr30g18a_samr30_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sleepmgr.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_example.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../conf_access.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_mem.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>thirdparty</name>
+		<group>
+			<name>fatfs</name>
+			<group>
+				<name>fatfs-r0.09</name>
+				<group>
+					<name>src</name>
+					<group>
+						<name>option</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/option/ccsbcs.c</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ff.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/ffconf.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/integer.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-r0.09/src/diskio.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>fatfs-port-r0.09</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/sam0/fattime_rtc.c</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../thirdparty/fatfs/fatfs-port-r0.09/diskio.c</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>storage</name>
+				<group>
+					<name>ctrl_access</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/storage/ctrl_access/ctrl_access.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/module_config_spi/conf_sd_mmc.h b/common2/components/memory/sd_mmc/module_config_spi/conf_sd_mmc.h
new file mode 100644
index 00000000..4fd0c8b9
--- /dev/null
+++ b/common2/components/memory/sd_mmc/module_config_spi/conf_sd_mmc.h
@@ -0,0 +1,96 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+/* Define to enable the SPI mode instead of Multimedia Card interface mode */
+#define SD_MMC_SPI_MODE
+
+/* Define to enable the SDIO support */
+//#define SDIO_SUPPORT_ENABLE
+
+/* Define to enable the debug trace to the current standard output (stdio) */
+//#define SD_MMC_DEBUG
+
+/* Define to memory count */
+#define SD_MMC_SPI_MEM_CNT          1
+
+/* Select the SPI module SD/MMC is connected to */
+#ifdef EXT1_SPI_MODULE /* Default configuration for Xplained Pro kit */
+#  define SD_MMC_SPI                 EXT1_SPI_MODULE
+#  define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#  define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#  define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#  define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#  define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#  define SD_MMC_CS                  EXT1_PIN_15
+
+#  define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#  define SD_MMC_0_CD_DETECT_VALUE   0
+#else /* Dummy configuration */
+#  define SD_MMC_SPI                 0
+#  define SD_MMC_SPI_PINMUX_SETTING  0
+#  define SD_MMC_SPI_PINMUX_PAD0     0
+#  define SD_MMC_SPI_PINMUX_PAD1     0
+#  define SD_MMC_SPI_PINMUX_PAD2     0
+#  define SD_MMC_SPI_PINMUX_PAD3     0
+
+#  define SD_MMC_CS                  0
+
+#  define SD_MMC_0_CD_GPIO           0
+#  define SD_MMC_0_CD_DETECT_VALUE   0
+#endif
+
+/* Define the SPI clock source */
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+/* Define the SPI max clock */
+#define SD_MMC_SPI_MAX_CLOCK       4000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/sd_mmc.c b/common2/components/memory/sd_mmc/sd_mmc.c
new file mode 100644
index 00000000..30bd59d5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/sd_mmc.c
@@ -0,0 +1,2135 @@
+/**
+ * \file
+ *
+ * \brief Common SD/MMC stack
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include <string.h>
+#include "conf_board.h"
+#include "board.h"
+#include "conf_sd_mmc.h"
+#include "sd_mmc_protocol.h"
+#include "sd_mmc.h"
+#include "delay.h"
+
+/**
+ * \ingroup sd_mmc_stack
+ * \defgroup sd_mmc_stack_internal Implementation of SD/MMC/SDIO Stack
+ * @{
+ */
+
+// Enable debug information for SD/MMC module
+#ifdef SD_MMC_DEBUG
+#  include <stdio.h>
+#  define sd_mmc_debug(...)      printf(__VA_ARGS__)
+#else
+#  define sd_mmc_debug(...)
+#endif
+
+#ifndef SD_MMC_SPI_MEM_CNT
+#  define SD_MMC_SPI_MEM_CNT 0
+#endif
+#ifndef SD_MMC_MCI_MEM_CNT
+#  define SD_MMC_MCI_MEM_CNT 0
+#endif
+#ifndef SD_MMC_HSMCI_MEM_CNT
+#  define SD_MMC_HSMCI_MEM_CNT 0
+#endif
+
+// Macros to switch SD MMC stack to the correct driver (MCI or SPI)
+#ifdef SD_MMC_SPI_MODE
+#  if (SD_MMC_SPI_MEM_CNT != 0)
+#    include "sd_mmc_spi.h"
+#    define driver  sd_mmc_spi
+#    define SD_MMC_MEM_CNT        SD_MMC_SPI_MEM_CNT
+#    define sd_mmc_is_spi()       true
+#  else
+#    error No SPI interface is defined for SD MMC stack. \
+     SD_MMC_SPI_MEM_CNT must be added in board.h file.
+#  endif
+#else
+#  if (SD_MMC_HSMCI_MEM_CNT != 0)
+#    include "hsmci.h"
+#    define driver  hsmci
+#    define SD_MMC_MEM_CNT        SD_MMC_HSMCI_MEM_CNT
+#    define sd_mmc_is_spi()       false
+#  elif (SD_MMC_MCI_MEM_CNT != 0)
+#    include "mci.h"
+#    define driver  mci
+#    define SD_MMC_MEM_CNT        SD_MMC_MCI_MEM_CNT
+#    define sd_mmc_is_spi()       false
+#  else
+#    error No MCI or HSMCI interfaces are defined for SD MMC stack. \
+     SD_MMC_MCI_MEM_CNT or SD_MMC_HSMCI_MEM_CNT  must be added in board.h file.
+#  endif
+#endif
+
+
+#define driver_init                     ATPASTE2(driver, _init)
+#define driver_select_device            ATPASTE2(driver, _select_device)
+#define driver_deselect_device          ATPASTE2(driver, _deselect_device)
+#define driver_get_bus_width            ATPASTE2(driver, _get_bus_width)
+#define driver_is_high_speed_capable    ATPASTE2(driver, _is_high_speed_capable)
+#define driver_send_clock               ATPASTE2(driver, _send_clock)
+#define driver_send_cmd                 ATPASTE2(driver, _send_cmd)
+#define driver_get_response             ATPASTE2(driver, _get_response)
+#define driver_get_response_128         ATPASTE2(driver, _get_response_128)
+#define driver_adtc_start               ATPASTE2(driver, _adtc_start)
+#define driver_adtc_stop                ATPASTE2(driver, _send_cmd)
+#define driver_read_word                ATPASTE2(driver, _read_word)
+#define driver_write_word               ATPASTE2(driver, _write_word)
+#define driver_start_read_blocks        ATPASTE2(driver, _start_read_blocks)
+#define driver_wait_end_of_read_blocks  ATPASTE2(driver, _wait_end_of_read_blocks)
+#define driver_start_write_blocks       ATPASTE2(driver, _start_write_blocks)
+#define driver_wait_end_of_write_blocks ATPASTE2(driver, _wait_end_of_write_blocks)
+
+
+#if (!defined SD_MMC_0_CD_GPIO) || (!defined SD_MMC_0_CD_DETECT_VALUE)
+#  warning No pin for card detection has been defined in board.h. \
+   The define SD_MMC_0_CD_GPIO, SD_MMC_0_CD_DETECT_VALUE must be added in board.h file.
+#endif
+
+#ifdef SDIO_SUPPORT_ENABLE
+#  define IS_SDIO()  (sd_mmc_card->type & CARD_TYPE_SDIO)
+#else
+#  define IS_SDIO()  false
+#endif
+
+#define sd_mmc_is_mci()  (!sd_mmc_is_spi())
+
+//! This SD MMC stack supports only the high voltage
+#define SD_MMC_VOLTAGE_SUPPORT \
+		(OCR_VDD_27_28 | OCR_VDD_28_29 | \
+		OCR_VDD_29_30 | OCR_VDD_30_31 | \
+		OCR_VDD_31_32 | OCR_VDD_32_33)
+
+//! SD/MMC card states
+enum card_state {
+	SD_MMC_CARD_STATE_READY    = 0, //!< Ready to use
+	SD_MMC_CARD_STATE_DEBOUNCE = 1, //!< Debounce on going
+	SD_MMC_CARD_STATE_INIT     = 2, //!< Initialization on going
+	SD_MMC_CARD_STATE_UNUSABLE = 3, //!< Unusable card
+	SD_MMC_CARD_STATE_NO_CARD  = 4, //!< No SD/MMC card inserted
+};
+
+//! SD/MMC card information structure
+struct sd_mmc_card {
+	uint32_t clock;            //!< Card access clock
+	uint32_t capacity;         //!< Card capacity in KBytes
+#if (defined SD_MMC_0_CD_GPIO)
+	uint32_t cd_gpio;          //!< Card detect GPIO
+#  if (defined SD_MMC_0_WP_GPIO)
+	uint32_t wp_gpio;          //!< Card write protection GPIO
+#  endif
+#endif
+	uint16_t rca;              //!< Relative card address
+	enum card_state state;     //!< Card state
+	card_type_t type;          //!< Card type
+	card_version_t version;    //!< Card version
+	uint8_t  bus_width;        //!< Number of DATA lin on bus (MCI only)
+	uint8_t csd[CSD_REG_BSIZE];//!< CSD register
+	uint8_t high_speed;        //!< High speed card (1)
+};
+
+//! SD/MMC card list
+//! Note: Initialize card detect pin fields if present
+static struct sd_mmc_card sd_mmc_cards[SD_MMC_MEM_CNT]
+#if (defined SD_MMC_0_CD_GPIO) && (defined SD_MMC_0_WP_GPIO)
+ = {
+# define SD_MMC_CD_WP(slot, unused) \
+	{.cd_gpio = SD_MMC_##slot##_CD_GPIO, \
+	.wp_gpio = SD_MMC_##slot##_WP_GPIO},
+	MREPEAT(SD_MMC_MEM_CNT, SD_MMC_CD_WP, ~)
+# undef SD_MMC_CD_WP
+}
+#elif (defined SD_MMC_0_CD_GPIO)
+ = {
+# define SD_MMC_CD(slot, unused) \
+	{.cd_gpio = SD_MMC_##slot##_CD_GPIO},
+	MREPEAT(SD_MMC_MEM_CNT, SD_MMC_CD, ~)
+# undef SD_MMC_CD
+}
+#endif
+;
+
+//! Index of current slot configurated
+static uint8_t sd_mmc_slot_sel;
+//! Pointer on current slot configurated
+static struct sd_mmc_card *sd_mmc_card;
+//! Number of block to read or write on the current transfer
+static uint16_t sd_mmc_nb_block_to_tranfer = 0;
+//! Number of block remaining to read or write on the current transfer
+static uint16_t sd_mmc_nb_block_remaining = 0;
+
+//! SD/MMC transfer rate unit codes (10K) list
+const uint32_t sd_mmc_trans_units[7] = {
+	10, 100, 1000, 10000, 0, 0, 0
+};
+//! SD transfer multiplier factor codes (1/10) list
+const uint32_t sd_trans_multipliers[16] = {
+	0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80
+};
+//! MMC transfer multiplier factor codes (1/10) list
+const uint32_t mmc_trans_multipliers[16] = {
+	0, 10, 12, 13, 15, 20, 26, 30, 35, 40, 45, 52, 55, 60, 70, 80
+};
+
+//! \name MMC, SD and SDIO commands process
+//! @{
+static bool mmc_spi_op_cond(void);
+static bool mmc_mci_op_cond(void);
+static bool sd_spi_op_cond(uint8_t v2);
+static bool sd_mci_op_cond(uint8_t v2);
+static bool sdio_op_cond(void);
+static bool sdio_get_max_speed(void);
+static bool sdio_cmd52_set_bus_width(void);
+static bool sdio_cmd52_set_high_speed(void);
+static bool sd_cm6_set_high_speed(void);
+static bool mmc_cmd6_set_bus_width(uint8_t bus_width);
+static bool mmc_cmd6_set_high_speed(void);
+static bool sd_cmd8(uint8_t * v2);
+static bool mmc_cmd8(uint8_t *b_authorize_high_speed);
+static bool sd_mmc_cmd9_spi(void);
+static bool sd_mmc_cmd9_mci(void);
+static void mmc_decode_csd(void);
+static void sd_decode_csd(void);
+static bool sd_mmc_cmd13(void);
+#ifdef SDIO_SUPPORT_ENABLE
+static bool sdio_cmd52(uint8_t rw_flag, uint8_t func_nb,
+		uint32_t reg_addr, uint8_t rd_after_wr, uint8_t *io_data);
+static bool sdio_cmd53(uint8_t rw_flag, uint8_t func_nb, uint32_t reg_addr,
+		uint8_t inc_addr, uint32_t size, bool access_block);
+#endif // SDIO_SUPPORT_ENABLE
+static bool sd_acmd6(void);
+static bool sd_acmd51(void);
+//! @}
+
+//! \name Internal function to process the initialization and install
+//! @{
+static sd_mmc_err_t sd_mmc_select_slot(uint8_t slot);
+static void sd_mmc_configure_slot(void);
+static void sd_mmc_deselect_slot(void);
+static bool sd_mmc_spi_card_init(void);
+static bool sd_mmc_mci_card_init(void);
+static bool sd_mmc_spi_install_mmc(void);
+static bool sd_mmc_mci_install_mmc(void);
+//! @}
+
+
+//! \name Internal functions to manage a large timeout after a card insertion
+//! @{
+#define SD_MMC_DEBOUNCE_TIMEOUT   1000 // Unit ms
+
+#if XMEGA
+#  define SD_MMC_START_TIMEOUT()  delay_ms(SD_MMC_DEBOUNCE_TIMEOUT)
+#  define SD_MMC_IS_TIMEOUT()     true
+#  define SD_MMC_STOP_TIMEOUT()
+#endif
+
+#if UC3
+static  t_cpu_time timer;
+#  define SD_MMC_START_TIMEOUT() \
+		cpu_set_timeout(cpu_ms_2_cy(SD_MMC_DEBOUNCE_TIMEOUT, sysclk_get_cpu_hz()), &timer)
+#  define SD_MMC_IS_TIMEOUT() \
+		cpu_is_timeout(&timer)
+#  define SD_MMC_STOP_TIMEOUT()
+#endif
+
+#if SAM
+static bool sd_mmc_sam_systick_used;
+
+#ifdef FREERTOS_USED
+	static xTimeOutType xTimeOut;
+#endif
+
+static inline void SD_MMC_START_TIMEOUT(void)
+{
+	if (!SysTick->CTRL) {
+		sd_mmc_sam_systick_used = true;
+		SysTick->LOAD = (system_gclk_gen_get_hz(0) / (8 * 1000))
+				* SD_MMC_DEBOUNCE_TIMEOUT;
+		SysTick->CTRL = SysTick_CTRL_ENABLE_Msk;
+	} else {
+		sd_mmc_sam_systick_used = false;
+#ifdef FREERTOS_USED
+		// Note: the define INCLUDE_vTaskDelay must be set to one
+		// in FreeRTOSConfig.h file.
+		vTaskSetTimeOutState(&xTimeOut);
+#else
+		delay_ms(SD_MMC_DEBOUNCE_TIMEOUT);
+#endif
+	}
+}
+
+static inline bool SD_MMC_IS_TIMEOUT(void)
+{
+	if (!sd_mmc_sam_systick_used) {
+#ifdef FREERTOS_USED
+		portTickType xTicksToWait =
+				SD_MMC_DEBOUNCE_TIMEOUT / portTICK_RATE_MS;
+		return (xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdTRUE);
+#else
+		return true;
+#endif
+	}
+	if (SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) {
+		SysTick->CTRL = 0;
+		return true;
+	}
+	return false;
+}
+
+static inline void SD_MMC_STOP_TIMEOUT(void)
+{
+	if (sd_mmc_sam_systick_used) {
+		SysTick->CTRL = 0;
+	}
+}
+#endif
+//! @}
+
+/**
+ * \brief Sends operation condition command and read OCR (SPI only)
+ * - CMD1 sends operation condition command
+ * - CMD58 reads OCR
+ *
+ * \return true if success, otherwise false
+ */
+static bool mmc_spi_op_cond(void)
+{
+	uint32_t retry, resp;
+
+	/*
+	 * Timeout 1s = 400KHz / ((6+1)*8) cylces = 7150 retry
+	 * 6 = cmd byte size
+	 * 1 = response byte size
+	 */
+	retry = 7150;
+	do {
+		if (!driver_send_cmd(MMC_SPI_CMD1_SEND_OP_COND, 0)) {
+			sd_mmc_debug("%s: CMD1 SPI Fail - Busy retry %d\n\r",
+					__func__, (int)(7150 - retry));
+			return false;
+		}
+		// Check busy flag
+		resp = driver_get_response();
+		if (!(resp & R1_SPI_IDLE)) {
+			break;
+		}
+		if (retry-- == 0) {
+			sd_mmc_debug("%s: CMD1 Timeout on busy\n\r", __func__);
+			return false;
+		}
+	} while (1);
+
+	// Read OCR for SPI mode
+	if (!driver_send_cmd(SDMMC_SPI_CMD58_READ_OCR, 0)) {
+		sd_mmc_debug("%s: CMD58 Fail\n\r", __func__);
+		return false;
+	}
+	// Check OCR value
+	if ((driver_get_response() & OCR_ACCESS_MODE_MASK)
+			== OCR_ACCESS_MODE_SECTOR) {
+		sd_mmc_card->type |= CARD_TYPE_HC;
+	}
+	return true;
+}
+
+/**
+ * \brief Sends operation condition command and read OCR (MCI only)
+ * - CMD1 sends operation condition command
+ * - CMD1 reads OCR
+ *
+ * \return true if success, otherwise false
+ */
+static bool mmc_mci_op_cond(void)
+{
+	uint32_t retry, resp;
+
+	/*
+	 * Timeout 1s = 400KHz / ((6+6)*8) cylces = 4200 retry
+	 * 6 = cmd byte size
+	 * 6 = response byte size
+	 */
+	retry = 4200;
+	do {
+		if (!driver_send_cmd(MMC_MCI_CMD1_SEND_OP_COND,
+				SD_MMC_VOLTAGE_SUPPORT | OCR_ACCESS_MODE_SECTOR)) {
+			sd_mmc_debug("%s: CMD1 MCI Fail - Busy retry %d\n\r",
+					__func__, (int)(4200 - retry));
+			return false;
+		}
+		// Check busy flag
+		resp = driver_get_response();
+		if (resp & OCR_POWER_UP_BUSY) {
+			// Check OCR value
+			if ((resp & OCR_ACCESS_MODE_MASK)
+					== OCR_ACCESS_MODE_SECTOR) {
+				sd_mmc_card->type |= CARD_TYPE_HC;
+			}
+			break;
+		}
+		if (retry-- == 0) {
+			sd_mmc_debug("%s: CMD1 Timeout on busy\n\r", __func__);
+			return false;
+		}
+	} while (1);
+	return true;
+}
+
+/**
+ * \brief Ask to all cards to send their operations conditions (SPI only).
+ * - ACMD41 sends operation condition command.
+ * - CMD58 reads OCR
+ *
+ * \param v2   Shall be 1 if it is a SD card V2
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_spi_op_cond(uint8_t v2)
+{
+	uint32_t arg, retry, resp;
+
+	/*
+	 * Timeout 1s = 400KHz / ((6+1)*8) cylces = 7150 retry
+	 * 6 = cmd byte size
+	 * 1 = response byte size
+	 */
+	retry = 7150;
+	do {
+		// CMD55 - Indicate to the card that the next command is an
+		// application specific command rather than a standard command.
+		if (!driver_send_cmd(SDMMC_CMD55_APP_CMD, 0)) {
+			sd_mmc_debug("%s: CMD55 Fail\n\r", __func__);
+			return false;
+		}
+
+		// (ACMD41) Sends host OCR register
+		arg = 0;
+		if (v2) {
+			arg |= SD_ACMD41_HCS;
+		}
+		// Check response
+		if (!driver_send_cmd(SD_SPI_ACMD41_SD_SEND_OP_COND, arg)) {
+			sd_mmc_debug("%s: ACMD41 Fail\n\r", __func__);
+			return false;
+		}
+		resp = driver_get_response();
+		if (!(resp & R1_SPI_IDLE)) {
+			// Card is ready
+			break;
+		}
+		if (retry-- == 0) {
+			sd_mmc_debug("%s: ACMD41 Timeout on busy, resp32 0x%08x \n\r",
+					__func__, resp);
+			return false;
+		}
+	} while (1);
+
+	// Read OCR for SPI mode
+	if (!driver_send_cmd(SDMMC_SPI_CMD58_READ_OCR, 0)) {
+		sd_mmc_debug("%s: CMD58 Fail\n\r", __func__);
+		return false;
+	}
+	if ((driver_get_response() & OCR_CCS) != 0) {
+		sd_mmc_card->type |= CARD_TYPE_HC;
+	}
+	return true;
+}
+
+/**
+ * \brief Ask to all cards to send their operations conditions (MCI only).
+ * - ACMD41 sends operation condition command.
+ * - ACMD41 reads OCR
+ *
+ * \param v2   Shall be 1 if it is a SD card V2
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mci_op_cond(uint8_t v2)
+{
+	uint32_t arg, retry, resp;
+
+	/*
+	 * Timeout 1s = 400KHz / ((6+6+6+6)*8) cylces = 2100 retry
+	 * 6 = cmd byte size
+	 * 6 = response byte size
+	 * 6 = cmd byte size
+	 * 6 = response byte size
+	 */
+	retry = 2100;
+	do {
+		// CMD55 - Indicate to the card that the next command is an
+		// application specific command rather than a standard command.
+		if (!driver_send_cmd(SDMMC_CMD55_APP_CMD, 0)) {
+			sd_mmc_debug("%s: CMD55 Fail\n\r", __func__);
+			return false;
+		}
+
+		// (ACMD41) Sends host OCR register
+		arg = SD_MMC_VOLTAGE_SUPPORT;
+		if (v2) {
+			arg |= SD_ACMD41_HCS;
+		}
+		// Check response
+		if (!driver_send_cmd(SD_MCI_ACMD41_SD_SEND_OP_COND, arg)) {
+			sd_mmc_debug("%s: ACMD41 Fail\n\r", __func__);
+			return false;
+		}
+		resp = driver_get_response();
+		if (resp & OCR_POWER_UP_BUSY) {
+			// Card is ready
+			if ((resp & OCR_CCS) != 0) {
+				sd_mmc_card->type |= CARD_TYPE_HC;
+			}
+			break;
+		}
+		if (retry-- == 0) {
+			sd_mmc_debug("%s: ACMD41 Timeout on busy, resp32 0x%08x \n\r",
+					__func__, resp);
+			return false;
+		}
+	} while (1);
+	return true;
+}
+
+#ifdef SDIO_SUPPORT_ENABLE
+/**
+ * \brief Try to get the SDIO card's operating condition
+ * - CMD5 to read OCR NF field
+ * - CMD5 to wait OCR power up busy
+ * - CMD5 to read OCR MP field
+ *   sd_mmc_card->type is updated
+ *
+ * \return true if success, otherwise false
+ */
+static bool sdio_op_cond(void)
+{
+	uint32_t resp;
+
+	// CMD5 - SDIO send operation condition (OCR) command.
+	if (!driver_send_cmd(SDIO_CMD5_SEND_OP_COND, 0)) {
+		sd_mmc_debug("%s: CMD5 Fail\n\r", __func__);
+		return true; // No error but card type not updated
+	}
+	resp = driver_get_response();
+	if ((resp & OCR_SDIO_NF) == 0) {
+		return true; // No error but card type not updated
+	}
+
+	/*
+	 * Wait card ready
+	 * Timeout 1s = 400KHz / ((6+4)*8) cylces = 5000 retry
+	 * 6 = cmd byte size
+	 * 4(SPI) 6(MCI) = response byte size
+	 */
+	uint32_t cmd5_retry = 5000;
+	while (1) {
+		// CMD5 - SDIO send operation condition (OCR) command.
+		if (!driver_send_cmd(SDIO_CMD5_SEND_OP_COND,
+				resp & SD_MMC_VOLTAGE_SUPPORT)) {
+			sd_mmc_debug("%s: CMD5 Fail\n\r", __func__);
+			return false;
+		}
+		resp = driver_get_response();
+		if ((resp & OCR_POWER_UP_BUSY) == OCR_POWER_UP_BUSY) {
+			break;
+		}
+		if (cmd5_retry-- == 0) {
+			sd_mmc_debug("%s: CMD5 Timeout on busy\n\r", __func__);
+			return false;
+		}
+	}
+	// Update card type at the end of busy
+	if ((resp & OCR_SDIO_MP) > 0) {
+		sd_mmc_card->type = CARD_TYPE_SD_COMBO;
+	} else {
+		sd_mmc_card->type = CARD_TYPE_SDIO;
+	}
+	return true; // No error and card type updated with SDIO type
+}
+
+/**
+ * \brief Get SDIO max transfer speed in Hz.
+ * - CMD53 reads CIS area address in CCCR area.
+ * - Nx CMD53 search Fun0 tuple in CIS area
+ * - CMD53 reads TPLFE_MAX_TRAN_SPEED in Fun0 tuple
+ * - Compute maximum speed of SDIO
+ *   and update sd_mmc_card->clock
+ *
+ * \return true if success, otherwise false
+ */
+static bool sdio_get_max_speed(void)
+{
+	uint32_t addr, addr_cis;
+	uint8_t buf[6];
+ 	uint32_t unit;
+	uint32_t mul;
+	uint8_t tplfe_max_tran_speed;
+
+	// Read CIS area address in CCCR area
+	addr_cis = 0; // Init all bytes, because the next function fill 3 bytes only
+	if (!sdio_cmd53(SDIO_CMD53_READ_FLAG, SDIO_CIA, SDIO_CCCR_CIS_PTR,
+			1, 3, true)) {
+		sd_mmc_debug("%s: CMD53 Read CIS Fail\n\r", __func__);
+		return false;
+	}
+	if (!driver_start_read_blocks((uint8_t *)&addr_cis, 1)) {
+		return false;
+	}
+	if (!driver_wait_end_of_read_blocks()) {
+		return false;
+	}
+	addr_cis = le32_to_cpu(addr_cis);
+
+	// Search Fun0 tuple in the CIA area
+	addr = addr_cis;
+	while (1) {
+		// Read a sample of CIA area
+		if (!sdio_cmd53(SDIO_CMD53_READ_FLAG, SDIO_CIA, addr, 1, 3, true)) {
+			sd_mmc_debug("%s: CMD53 Read CIA Fail\n\r", __func__);
+			return false;
+		}
+		if (!driver_start_read_blocks(buf, 1)) {
+			return false;
+		}
+		if (!driver_wait_end_of_read_blocks()) {
+			return false;
+		}
+		if (buf[0] == SDIO_CISTPL_END) {
+			sd_mmc_debug("%s: CMD53 Tuple error\n\r", __func__);
+			return false; // Tuple error
+		}
+		if (buf[0] == SDIO_CISTPL_FUNCE && buf[2] == 0x00) {
+			break; // Fun0 tuple found
+		}
+		if (buf[1] == 0) {
+			sd_mmc_debug("%s: CMD53 Tuple error\n\r", __func__);
+			return false; // Tuple error
+		}
+
+		// Next address
+		addr += (buf[1] + 2);
+		if (addr > (addr_cis + 256)) {
+			sd_mmc_debug("%s: CMD53 Outoff CIS area\n\r", __func__);
+			return false; // Outoff CIS area
+		}
+	}
+
+	// Read all Fun0 tuple fields: fn0_blk_siz & max_tran_speed
+	if (!sdio_cmd53(SDIO_CMD53_READ_FLAG, SDIO_CIA, addr, 1, 6, true)) {
+		sd_mmc_debug("%s: CMD53 Read all Fun0 Fail\n\r", __func__);
+		return false;
+	}
+	if (!driver_start_read_blocks(buf, 1)) {
+		return false;
+	}
+	if (!driver_wait_end_of_read_blocks()) {
+		return false;
+	}
+	tplfe_max_tran_speed = buf[5];
+	if (tplfe_max_tran_speed > 0x32) {
+		/* Error on SDIO register, the high speed is not activated
+		 * and the clock can not be more than 25MHz.
+		 * This error is present on specific SDIO card
+		 * (H&D wireless card - HDG104 WiFi SIP).
+		 */
+		tplfe_max_tran_speed = 0x32; // 25Mhz
+	}
+
+	// Decode transfer speed in Hz.
+	unit = sd_mmc_trans_units[tplfe_max_tran_speed & 0x7];
+	mul = sd_trans_multipliers[(tplfe_max_tran_speed >> 3) & 0xF];
+	sd_mmc_card->clock = unit * mul * 1000;
+	/**
+	 * Note: A combo card shall be a Full-Speed SDIO card
+	 * which supports upto 25MHz.
+	 * A SDIO card alone can be:
+	 * - a Low-Speed SDIO card which supports 400Khz minimum
+	 * - a Full-Speed SDIO card which supports upto 25MHz
+	 */
+	return true;
+}
+
+/**
+ * \brief CMD52 for SDIO - Switches the bus width mode to 4
+ *
+ * \note sd_mmc_card->bus_width is updated.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sdio_cmd52_set_bus_width(void)
+{
+	/**
+	 * A SD memory card always supports bus 4bit
+	 * A SD COMBO card always supports bus 4bit
+	 * A SDIO Full-Speed alone always supports 4bit
+	 * A SDIO Low-Speed alone can supports 4bit (Optional)
+	 */
+	uint8_t u8_value;
+
+	// Check 4bit support in 4BLS of "Card Capability" register
+	if (!sdio_cmd52(SDIO_CMD52_READ_FLAG, SDIO_CIA, SDIO_CCCR_CAP,
+			0, &u8_value)) {
+		return false;
+	}
+	if ((u8_value & SDIO_CAP_4BLS) != SDIO_CAP_4BLS) {
+		// No supported, it is not a protocol error
+		return true;
+	}
+	// HS mode possible, then enable
+	u8_value = SDIO_BUSWIDTH_4B;
+	if (!sdio_cmd52(SDIO_CMD52_WRITE_FLAG, SDIO_CIA, SDIO_CCCR_BUS_CTRL,
+			1, &u8_value)) {
+		return false;
+	}
+	sd_mmc_card->bus_width = 4;
+	sd_mmc_debug("%d-bit bus width enabled.\n\r", (int)sd_mmc_card->bus_width);
+	return true;
+}
+
+/**
+ * \brief CMD52 for SDIO - Enable the high speed mode
+ *
+ * \note sd_mmc_card->high_speed is updated.
+ * \note sd_mmc_card->clock is updated.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sdio_cmd52_set_high_speed(void)
+{
+	uint8_t u8_value;
+
+	// Check CIA.HS
+	if (!sdio_cmd52(SDIO_CMD52_READ_FLAG, SDIO_CIA, SDIO_CCCR_HS, 0, &u8_value)) {
+		return false;
+	}
+	if ((u8_value & SDIO_SHS) != SDIO_SHS) {
+		// No supported, it is not a protocol error
+		return true;
+	}
+	// HS mode possible, then enable
+	u8_value = SDIO_EHS;
+	if (!sdio_cmd52(SDIO_CMD52_WRITE_FLAG, SDIO_CIA, SDIO_CCCR_HS,
+			1, &u8_value)) {
+		return false;
+	}
+	sd_mmc_card->high_speed = 1;
+	sd_mmc_card->clock *= 2;
+	return true;
+}
+
+#else
+static bool sdio_op_cond(void)
+{
+	return true; // No error but card type not updated
+}
+static bool sdio_get_max_speed(void)
+{
+	return false;
+}
+static bool sdio_cmd52_set_bus_width(void)
+{
+	return false;
+}
+static bool sdio_cmd52_set_high_speed(void)
+{
+	return false;
+}
+#endif // SDIO_SUPPORT_ENABLE
+
+/**
+ * \brief CMD6 for SD - Switch card in high speed mode
+ *
+ * \note CMD6 for SD is valid under the "trans" state.
+ * \note sd_mmc_card->high_speed is updated.
+ * \note sd_mmc_card->clock is updated.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_cm6_set_high_speed(void)
+{
+	uint8_t switch_status[SD_SW_STATUS_BSIZE];
+
+	if (!driver_adtc_start(SD_CMD6_SWITCH_FUNC,
+			SD_CMD6_MODE_SWITCH
+			| SD_CMD6_GRP6_NO_INFLUENCE
+			| SD_CMD6_GRP5_NO_INFLUENCE
+			| SD_CMD6_GRP4_NO_INFLUENCE
+			| SD_CMD6_GRP3_NO_INFLUENCE
+			| SD_CMD6_GRP2_DEFAULT
+			| SD_CMD6_GRP1_HIGH_SPEED,
+			SD_SW_STATUS_BSIZE, 1, true)) {
+		return false;
+	}
+	if (!driver_start_read_blocks(switch_status, 1)) {
+		return false;
+	}
+	if (!driver_wait_end_of_read_blocks()) {
+		return false;
+	}
+
+	if (driver_get_response() & CARD_STATUS_SWITCH_ERROR) {
+		sd_mmc_debug("%s: CMD6 CARD_STATUS_SWITCH_ERROR\n\r", __func__);
+		return false;
+	}
+	if (SD_SW_STATUS_FUN_GRP1_RC(switch_status)
+			== SD_SW_STATUS_FUN_GRP_RC_ERROR) {
+		// No supported, it is not a protocol error
+		return true;
+	}
+	if (SD_SW_STATUS_FUN_GRP1_BUSY(switch_status)) {
+		sd_mmc_debug("%s: CMD6 SD_SW_STATUS_FUN_GRP1_BUSY\n\r", __func__);
+		return false;
+	}
+	// CMD6 function switching period is within 8 clocks
+	// after the end bit of status data.
+	driver_send_clock();
+	sd_mmc_card->high_speed = 1;
+	sd_mmc_card->clock *= 2;
+	return true;
+}
+
+/**
+ * \brief CMD6 for MMC - Switches the bus width mode
+ *
+ * \note CMD6 is valid under the "trans" state.
+ * \note sd_mmc_card->bus_width is updated.
+ *
+ * \param bus_width   Bus width to set
+ *
+ * \return true if success, otherwise false
+ */
+static bool mmc_cmd6_set_bus_width(uint8_t bus_width)
+{
+	uint32_t arg;
+
+	switch (bus_width) {
+	case 8:
+		arg = MMC_CMD6_ACCESS_SET_BITS
+				| MMC_CMD6_INDEX_BUS_WIDTH
+				| MMC_CMD6_VALUE_BUS_WIDTH_8BIT;
+		break;
+	case 4:
+		arg = MMC_CMD6_ACCESS_SET_BITS
+				| MMC_CMD6_INDEX_BUS_WIDTH
+				| MMC_CMD6_VALUE_BUS_WIDTH_4BIT;
+		break;
+	default:
+		arg = MMC_CMD6_ACCESS_SET_BITS
+				| MMC_CMD6_INDEX_BUS_WIDTH
+				| MMC_CMD6_VALUE_BUS_WIDTH_1BIT;
+		break;
+	}
+	if (!driver_send_cmd(MMC_CMD6_SWITCH, arg)) {
+		return false;
+	}
+	if (driver_get_response() & CARD_STATUS_SWITCH_ERROR) {
+		// No supported, it is not a protocol error
+		sd_mmc_debug("%s: CMD6 CARD_STATUS_SWITCH_ERROR\n\r", __func__);
+		return false;
+	}
+	sd_mmc_card->bus_width = bus_width;
+	sd_mmc_debug("%d-bit bus width enabled.\n\r", (int)sd_mmc_card->bus_width);
+	return true;
+}
+
+/**
+ * \brief CMD6 for MMC - Switches in high speed mode
+ *
+ * \note CMD6 is valid under the "trans" state.
+ * \note sd_mmc_card->high_speed is updated.
+ * \note sd_mmc_card->clock is updated.
+ *
+ * \return true if success, otherwise false
+ */
+static bool mmc_cmd6_set_high_speed(void)
+{
+	if (!driver_send_cmd(MMC_CMD6_SWITCH,
+			MMC_CMD6_ACCESS_WRITE_BYTE
+			| MMC_CMD6_INDEX_HS_TIMING
+			| MMC_CMD6_VALUE_HS_TIMING_ENABLE)) {
+		return false;
+	}
+	if (driver_get_response() & CARD_STATUS_SWITCH_ERROR) {
+		// No supported, it is not a protocol error
+		sd_mmc_debug("%s: CMD6 CARD_STATUS_SWITCH_ERROR\n\r", __func__);
+		return false;
+	}
+	sd_mmc_card->high_speed = 1;
+	sd_mmc_card->clock = 52000000lu;
+	return true;
+}
+
+/**
+ * \brief CMD8 for SD card - Send Interface Condition Command.
+ *
+ * \note
+ * Send SD Memory Card interface condition, which includes host supply
+ * voltage information and asks the card whether card supports voltage.
+ * Should be performed at initialization time to detect the card type.
+ *
+ * \param v2 Pointer to v2 flag to update
+ *
+ * \return true if success, otherwise false
+ *         with a update of \ref sd_mmc_err.
+ */
+static bool sd_cmd8(uint8_t * v2)
+{
+	uint32_t resp;
+
+	*v2 = 0;
+	// Test for SD version 2
+	if (!driver_send_cmd(SD_CMD8_SEND_IF_COND,
+			SD_CMD8_PATTERN | SD_CMD8_HIGH_VOLTAGE)) {
+		return true; // It is not a V2
+	}
+	// Check R7 response
+	resp = driver_get_response();
+	if (resp == 0xFFFFFFFF) {
+		// No compliance R7 value
+		return true; // It is not a V2
+	}
+	if ((resp & (SD_CMD8_MASK_PATTERN | SD_CMD8_MASK_VOLTAGE))
+				!= (SD_CMD8_PATTERN | SD_CMD8_HIGH_VOLTAGE)) {
+		sd_mmc_debug("%s: CMD8 resp32 0x%08x UNUSABLE CARD\n\r",
+				__func__, resp);
+		return false;
+	}
+	sd_mmc_debug("SD card V2\n\r");
+	*v2 = 1;
+	return true;
+}
+
+/**
+ * \brief CMD8 - The card sends its EXT_CSD register as a block of data.
+ *
+ * \param b_authorize_high_speed Pointer to update with the high speed
+ * support information
+ *
+ * \return true if success, otherwise false
+ */
+static bool mmc_cmd8(uint8_t *b_authorize_high_speed)
+{
+	uint16_t i;
+	uint32_t ext_csd;
+	uint32_t sec_count;
+
+	if (!driver_adtc_start(MMC_CMD8_SEND_EXT_CSD, 0,
+			EXT_CSD_BSIZE, 1, false)) {
+		return false;
+	}
+	//** Read and decode Extended Extended CSD
+	// Note: The read access is done in byte to avoid a buffer
+	// of EXT_CSD_BSIZE Byte in stack.
+
+	// Read card type
+	for (i = 0; i < (EXT_CSD_CARD_TYPE_INDEX + 4) / 4; i++) {
+		if (!driver_read_word(&ext_csd)) {
+			return false;
+		}
+	}
+	*b_authorize_high_speed = (ext_csd >> ((EXT_CSD_CARD_TYPE_INDEX % 4) * 8))
+			& MMC_CTYPE_52MHZ;
+
+	if (MMC_CSD_C_SIZE(sd_mmc_card->csd) == 0xFFF) {
+		// For high capacity SD/MMC card,
+		// memory capacity = SEC_COUNT * 512 byte
+		for (; i <(EXT_CSD_SEC_COUNT_INDEX + 4) / 4; i++) {
+			if (!driver_read_word(&sec_count)) {
+				return false;
+			}
+		}
+		sd_mmc_card->capacity = sec_count / 2;
+	}
+	for (; i < EXT_CSD_BSIZE / 4; i++) {
+		if (!driver_read_word(&sec_count)) {
+			return false;
+		}
+	}
+	return true;
+}
+
+/**
+ * \brief CMD9: Addressed card sends its card-specific
+ * data (CSD) on the CMD line spi.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mmc_cmd9_spi(void)
+{
+	if (!driver_adtc_start(SDMMC_SPI_CMD9_SEND_CSD, (uint32_t)sd_mmc_card->rca << 16,
+			CSD_REG_BSIZE, 1, true)) {
+		return false;
+	}
+	if (!driver_start_read_blocks(sd_mmc_card->csd, 1)) {
+		return false;
+	}
+	return driver_wait_end_of_read_blocks();
+}
+
+/**
+ * \brief CMD9: Addressed card sends its card-specific
+ * data (CSD) on the CMD line mci.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mmc_cmd9_mci(void)
+{
+	if (!driver_send_cmd(SDMMC_MCI_CMD9_SEND_CSD, (uint32_t)sd_mmc_card->rca << 16)) {
+		return false;
+	}
+	driver_get_response_128(sd_mmc_card->csd);
+	return true;
+}
+
+/**
+ * \brief Decodes MMC CSD register
+ */
+static void mmc_decode_csd(void)
+{
+ 	uint32_t unit;
+	uint32_t mul;
+	uint32_t tran_speed;
+
+	// Get MMC System Specification version supported by the card
+	switch (MMC_CSD_SPEC_VERS(sd_mmc_card->csd)) {
+	default:
+	case 0:
+		sd_mmc_card->version = CARD_VER_MMC_1_2;
+		break;
+
+	case 1:
+		sd_mmc_card->version = CARD_VER_MMC_1_4;
+		break;
+
+	case 2:
+		sd_mmc_card->version = CARD_VER_MMC_2_2;
+		break;
+
+	case 3:
+		sd_mmc_card->version = CARD_VER_MMC_3;
+		break;
+
+	case 4:
+		sd_mmc_card->version = CARD_VER_MMC_4;
+		break;
+	}
+
+	// Get MMC memory max transfer speed in Hz.
+	tran_speed = CSD_TRAN_SPEED(sd_mmc_card->csd);
+	unit = sd_mmc_trans_units[tran_speed & 0x7];
+	mul = mmc_trans_multipliers[(tran_speed >> 3) & 0xF];
+	sd_mmc_card->clock = unit * mul * 1000;
+
+	/*
+	 * Get card capacity.
+	 * ----------------------------------------------------
+	 * For normal SD/MMC card:
+	 * memory capacity = BLOCKNR * BLOCK_LEN
+	 * Where
+	 * BLOCKNR = (C_SIZE+1) * MULT
+	 * MULT = 2 ^ (C_SIZE_MULT+2)       (C_SIZE_MULT < 8)
+	 * BLOCK_LEN = 2 ^ READ_BL_LEN      (READ_BL_LEN < 12)
+	 * ----------------------------------------------------
+	 * For high capacity SD/MMC card:
+	 * memory capacity = SEC_COUNT * 512 byte
+	 */
+	if (MMC_CSD_C_SIZE(sd_mmc_card->csd) != 0xFFF) {
+		uint32_t blocknr = ((MMC_CSD_C_SIZE(sd_mmc_card->csd) + 1) *
+			(1 << (MMC_CSD_C_SIZE_MULT(sd_mmc_card->csd) + 2)));
+		sd_mmc_card->capacity = blocknr *
+			(1 << MMC_CSD_READ_BL_LEN(sd_mmc_card->csd)) / 1024;
+	}
+}
+
+/**
+ * \brief Decodes SD CSD register
+ */
+static void sd_decode_csd(void)
+{
+ 	uint32_t unit;
+	uint32_t mul;
+	uint32_t tran_speed;
+
+	// Get SD memory maximum transfer speed in Hz.
+	tran_speed = CSD_TRAN_SPEED(sd_mmc_card->csd);
+	unit = sd_mmc_trans_units[tran_speed & 0x7];
+	mul = sd_trans_multipliers[(tran_speed >> 3) & 0xF];
+	sd_mmc_card->clock = unit * mul * 1000;
+
+	/*
+	 * Get card capacity.
+	 * ----------------------------------------------------
+	 * For normal SD/MMC card:
+	 * memory capacity = BLOCKNR * BLOCK_LEN
+	 * Where
+	 * BLOCKNR = (C_SIZE+1) * MULT
+	 * MULT = 2 ^ (C_SIZE_MULT+2)       (C_SIZE_MULT < 8)
+	 * BLOCK_LEN = 2 ^ READ_BL_LEN      (READ_BL_LEN < 12)
+	 * ----------------------------------------------------
+	 * For high capacity SD card:
+	 * memory capacity = (C_SIZE+1) * 512K byte
+	 */
+	if (CSD_STRUCTURE_VERSION(sd_mmc_card->csd) >= SD_CSD_VER_2_0) {
+		sd_mmc_card->capacity =
+				(SD_CSD_2_0_C_SIZE(sd_mmc_card->csd) + 1)
+				* 512;
+	} else {
+		uint32_t blocknr = ((SD_CSD_1_0_C_SIZE(sd_mmc_card->csd) + 1) *
+				(1 << (SD_CSD_1_0_C_SIZE_MULT(sd_mmc_card->csd) + 2)));
+		sd_mmc_card->capacity = blocknr *
+				(1 << SD_CSD_1_0_READ_BL_LEN(sd_mmc_card->csd))
+				/ 1024;
+	}
+}
+
+/**
+ * \brief CMD13 - Addressed card sends its status register.
+ * This function waits the clear of the busy flag
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mmc_cmd13(void)
+{
+	uint32_t nec_timeout;
+
+	/* Wait for data ready status.
+	 * Nec timing: 0 to unlimited
+	 * However a timeout is used.
+	 * 200 000 * 8 cycles
+	 */
+	nec_timeout = 200000;
+	do {
+		if (sd_mmc_is_spi()) {
+			if (!driver_send_cmd(SDMMC_SPI_CMD13_SEND_STATUS, 0)) {
+				return false;
+			}
+			// Check busy flag
+			if (!(driver_get_response() & 0xFF)) {
+				break;
+			}
+		} else {
+			if (!driver_send_cmd(SDMMC_MCI_CMD13_SEND_STATUS,
+					(uint32_t)sd_mmc_card->rca << 16)) {
+				return false;
+			}
+			// Check busy flag
+			if (driver_get_response() & CARD_STATUS_READY_FOR_DATA) {
+				break;
+			}
+		}
+		if (nec_timeout-- == 0) {
+			sd_mmc_debug("%s: CMD13 Busy timeout\n\r", __func__);
+			return false;
+		}
+	} while (1);
+
+	return true;
+}
+
+#ifdef SDIO_SUPPORT_ENABLE
+/**
+ * \brief CMD52 - SDIO IO_RW_DIRECT command
+ *
+ * \param rw_flag   Direction, 1:write, 0:read.
+ * \param func_nb   Number of the function.
+ * \param rd_after_wr Read after Write flag.
+ * \param reg_addr  register address.
+ * \param io_data   Pointer to input argument and response buffer.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sdio_cmd52(uint8_t rw_flag, uint8_t func_nb,
+		uint32_t reg_addr, uint8_t rd_after_wr, uint8_t *io_data)
+{
+	Assert(io_data != NULL);
+	if (!driver_send_cmd(SDIO_CMD52_IO_RW_DIRECT,
+		((uint32_t)*io_data << SDIO_CMD52_WR_DATA)
+		| ((uint32_t)rw_flag << SDIO_CMD52_RW_FLAG)
+		| ((uint32_t)func_nb << SDIO_CMD52_FUNCTION_NUM)
+		| ((uint32_t)rd_after_wr << SDIO_CMD52_RAW_FLAG)
+		| ((uint32_t)reg_addr << SDIO_CMD52_REG_ADRR))) {
+		return false;
+	}
+	*io_data = driver_get_response() & 0xFF;
+	return true;
+}
+
+/**
+ * \brief CMD53 - SDIO IO_RW_EXTENDED command
+ * This implementation support only the SDIO multi-byte transfer mode which is
+ * similar to the single block transfer on memory.
+ * Note: The SDIO block transfer mode is optional for SDIO card.
+ *
+ * \param rw_flag   Direction, 1:write, 0:read.
+ * \param func_nb   Number of the function.
+ * \param reg_addr  Register address.
+ * \param inc_addr  1:Incrementing address, 0: fixed.
+ * \param size      Transfer data size.
+ * \param access_block  true, if the block access (DMA) is used
+ *
+ * \return true if success, otherwise false
+ */
+static bool sdio_cmd53(uint8_t rw_flag, uint8_t func_nb, uint32_t reg_addr,
+		uint8_t inc_addr, uint32_t size, bool access_block)
+{
+	Assert(size != 0);
+	Assert(size <= 512);
+
+	return driver_adtc_start((rw_flag == SDIO_CMD53_READ_FLAG)?
+			SDIO_CMD53_IO_R_BYTE_EXTENDED :
+			SDIO_CMD53_IO_W_BYTE_EXTENDED,
+			((size % 512) << SDIO_CMD53_COUNT)
+			| ((uint32_t)reg_addr << SDIO_CMD53_REG_ADDR)
+			| ((uint32_t)inc_addr << SDIO_CMD53_OP_CODE)
+			| ((uint32_t)0 << SDIO_CMD53_BLOCK_MODE)
+			| ((uint32_t)func_nb << SDIO_CMD53_FUNCTION_NUM)
+			| ((uint32_t)rw_flag << SDIO_CMD53_RW_FLAG),
+			size, 1, access_block);
+}
+#endif // SDIO_SUPPORT_ENABLE
+
+/**
+ * \brief ACMD6 - Define the data bus width to 4 bits bus
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_acmd6(void)
+{
+	// CMD55 - Indicate to the card that the next command is an
+	// application specific command rather than a standard command.
+	if (!driver_send_cmd(SDMMC_CMD55_APP_CMD, (uint32_t)sd_mmc_card->rca << 16)) {
+		return false;
+	}
+	// 10b = 4 bits bus
+	if (!driver_send_cmd(SD_ACMD6_SET_BUS_WIDTH, 0x2)) {
+		return false;
+	}
+	sd_mmc_card->bus_width = 4;
+	sd_mmc_debug("%d-bit bus width enabled.\n\r", (int)sd_mmc_card->bus_width);
+	return true;
+}
+
+/**
+ * \brief ACMD51 - Read the SD Configuration Register.
+ *
+ * \note
+ * SD Card Configuration Register (SCR) provides information on the SD Memory
+ * Card's special features that were configured into the given card. The size
+ * of SCR register is 64 bits.
+ *
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_acmd51(void)
+{
+	uint8_t scr[SD_SCR_REG_BSIZE];
+
+	// CMD55 - Indicate to the card that the next command is an
+	// application specific command rather than a standard command.
+	if (!driver_send_cmd(SDMMC_CMD55_APP_CMD, (uint32_t)sd_mmc_card->rca << 16)) {
+		return false;
+	}
+	if (!driver_adtc_start(SD_ACMD51_SEND_SCR, 0,
+			SD_SCR_REG_BSIZE, 1, true)) {
+		return false;
+	}
+	if (!driver_start_read_blocks(scr, 1)) {
+		return false;
+	}
+	if (!driver_wait_end_of_read_blocks()) {
+		return false;
+	}
+
+	// Get SD Memory Card - Spec. Version
+	switch (SD_SCR_SD_SPEC(scr)) {
+	case SD_SCR_SD_SPEC_1_0_01:
+		sd_mmc_card->version = CARD_VER_SD_1_0;
+		break;
+
+	case SD_SCR_SD_SPEC_1_10:
+		sd_mmc_card->version = CARD_VER_SD_1_10;
+		break;
+
+	case SD_SCR_SD_SPEC_2_00:
+		if (SD_SCR_SD_SPEC3(scr) == SD_SCR_SD_SPEC_3_00) {
+			sd_mmc_card->version = CARD_VER_SD_3_0;
+		} else {
+			sd_mmc_card->version = CARD_VER_SD_2_0;
+		}
+		break;
+
+	default:
+		sd_mmc_card->version = CARD_VER_SD_1_0;
+		break;
+	}
+	return true;
+}
+
+/**
+ * \brief Select a card slot and initialize the associated driver
+ *
+ * \param slot  Card slot number
+ *
+ * \retval SD_MMC_ERR_SLOT     Wrong slot number
+ * \retval SD_MMC_ERR_NO_CARD  No card present on slot
+ * \retval SD_MMC_ERR_UNUSABLE Unusable card
+ * \retval SD_MMC_INIT_ONGOING Card initialization requested
+ * \retval SD_MMC_OK           Card present
+ */
+static sd_mmc_err_t sd_mmc_select_slot(uint8_t slot)
+{
+	if (slot >= SD_MMC_MEM_CNT) {
+		return SD_MMC_ERR_SLOT;
+	}
+	Assert(sd_mmc_nb_block_remaining == 0);
+
+#if (defined SD_MMC_0_CD_GPIO)
+	//! Card Detect pins
+	if (port_pin_get_input_level(sd_mmc_cards[slot].cd_gpio)
+			!= SD_MMC_0_CD_DETECT_VALUE) {
+		if (sd_mmc_cards[slot].state == SD_MMC_CARD_STATE_DEBOUNCE) {
+			SD_MMC_STOP_TIMEOUT();
+		}
+		sd_mmc_cards[slot].state = SD_MMC_CARD_STATE_NO_CARD;
+		return SD_MMC_ERR_NO_CARD;
+	}
+	if (sd_mmc_cards[slot].state == SD_MMC_CARD_STATE_NO_CARD) {
+		// A card plug on going, but this is not initialized
+		sd_mmc_cards[slot].state = SD_MMC_CARD_STATE_DEBOUNCE;
+		// Debounce + Power On Setup
+		SD_MMC_START_TIMEOUT();
+		return SD_MMC_ERR_NO_CARD;
+	}
+	if (sd_mmc_cards[slot].state == SD_MMC_CARD_STATE_DEBOUNCE) {
+		if (!SD_MMC_IS_TIMEOUT()) {
+			// Debounce on going
+			return SD_MMC_ERR_NO_CARD;
+		}
+		// Card is not initialized
+		sd_mmc_cards[slot].state = SD_MMC_CARD_STATE_INIT;
+		// Set 1-bit bus width and low clock for initialization
+		sd_mmc_cards[slot].clock = SDMMC_CLOCK_INIT;
+		sd_mmc_cards[slot].bus_width = 1;
+		sd_mmc_cards[slot].high_speed = 0;
+	}
+	if (sd_mmc_cards[slot].state == SD_MMC_CARD_STATE_UNUSABLE) {
+		return SD_MMC_ERR_UNUSABLE;
+	}
+#else
+	// No pin card detection, then always try to install it
+	if ((sd_mmc_cards[slot].state == SD_MMC_CARD_STATE_NO_CARD)
+			|| (sd_mmc_cards[slot].state == SD_MMC_CARD_STATE_UNUSABLE)) {
+		// Card is not initialized
+		sd_mmc_cards[slot].state = SD_MMC_CARD_STATE_INIT;
+		// Set 1-bit bus width and low clock for initialization
+		sd_mmc_cards[slot].clock = SDMMC_CLOCK_INIT;
+		sd_mmc_cards[slot].bus_width = 1;
+		sd_mmc_cards[slot].high_speed = 0;
+	}
+#endif
+
+	// Initialize interface
+	sd_mmc_slot_sel = slot;
+	sd_mmc_card = &sd_mmc_cards[slot];
+	sd_mmc_configure_slot();
+	return (sd_mmc_cards[slot].state == SD_MMC_CARD_STATE_INIT) ?
+			SD_MMC_INIT_ONGOING : SD_MMC_OK;
+}
+
+/**
+ * \brief Configures the driver with the selected card configuration
+ */
+static void sd_mmc_configure_slot(void)
+{
+	driver_select_device(sd_mmc_slot_sel, sd_mmc_card->clock,
+			sd_mmc_card->bus_width, sd_mmc_card->high_speed);
+}
+
+/**
+ * \brief Deselect the current card slot
+ */
+static void sd_mmc_deselect_slot(void)
+{
+	if (sd_mmc_slot_sel < SD_MMC_MEM_CNT) {
+		driver_deselect_device(sd_mmc_slot_sel);
+	}
+}
+
+/**
+ * \brief Initialize the SD card in SPI mode.
+ *
+ * \note
+ * This function runs the initialization procedure and the identification
+ * process, then it sets the SD/MMC card in transfer state.
+ * At last, it will automaticly enable maximum bus width and transfer speed.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mmc_spi_card_init(void)
+{
+	uint8_t v2 = 0;
+
+	// In first, try to install SD/SDIO card
+	sd_mmc_card->type = CARD_TYPE_SD;
+	sd_mmc_card->version = CARD_VER_UNKNOWN;
+	sd_mmc_card->rca = 0;
+	sd_mmc_debug("Start SD card install\n\r");
+
+	// Card need of 74 cycles clock minimum to start
+	driver_send_clock();
+
+	// CMD0 - Reset all cards to idle state.
+	if (!driver_send_cmd(SDMMC_SPI_CMD0_GO_IDLE_STATE, 0)) {
+		return false;
+	}
+	if (!sd_cmd8(&v2)) {
+		return false;
+	}
+	// Try to get the SDIO card's operating condition
+	if (!sdio_op_cond()) {
+		return false;
+	}
+
+	if (sd_mmc_card->type & CARD_TYPE_SD) {
+		// Try to get the SD card's operating condition
+		if (!sd_spi_op_cond(v2)) {
+			// It is not a SD card
+			sd_mmc_debug("Start MMC Install\n\r");
+			sd_mmc_card->type = CARD_TYPE_MMC;
+			return sd_mmc_spi_install_mmc();
+		}
+
+		/* The CRC on card is disabled by default.
+		 * However, to be sure, the CRC OFF command is send.
+		 * Unfortunately, specific SDIO card does not support it
+		 * (H&D wireless card - HDG104 WiFi SIP)
+		 * and the command is send only on SD card.
+		 */
+		if (!driver_send_cmd(SDMMC_SPI_CMD59_CRC_ON_OFF, 0)) {
+			return false;
+		}
+	}
+	// SD MEMORY
+	if (sd_mmc_card->type & CARD_TYPE_SD) {
+		// Get the Card-Specific Data
+		if (!sd_mmc_cmd9_spi()) {
+			return false;
+		}
+		sd_decode_csd();
+		// Read the SCR to get card version
+		if (!sd_acmd51()) {
+			return false;
+		}
+	}
+	if (IS_SDIO()) {
+		if (!sdio_get_max_speed()) {
+			return false;
+		}
+	}
+	// SD MEMORY not HC, Set default block size
+	if ((sd_mmc_card->type & CARD_TYPE_SD) &&
+			(0 == (sd_mmc_card->type & CARD_TYPE_HC))) {
+		if (!driver_send_cmd(SDMMC_CMD16_SET_BLOCKLEN, SD_MMC_BLOCK_SIZE)) {
+			return false;
+		}
+	}
+	// Check communication
+	if (sd_mmc_card->type & CARD_TYPE_SD) {
+		if (!sd_mmc_cmd13()) {
+			return false;
+		}
+	}
+	// Reinitialize the slot with the new speed
+	sd_mmc_configure_slot();
+	return true;
+}
+
+/**
+ * \brief Initialize the SD card in MCI mode.
+ *
+ * \note
+ * This function runs the initialization procedure and the identification
+ * process, then it sets the SD/MMC card in transfer state.
+ * At last, it will automaticly enable maximum bus width and transfer speed.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mmc_mci_card_init(void)
+{
+	uint8_t v2 = 0;
+
+	// In first, try to install SD/SDIO card
+	sd_mmc_card->type = CARD_TYPE_SD;
+	sd_mmc_card->version = CARD_VER_UNKNOWN;
+	sd_mmc_card->rca = 0;
+	sd_mmc_debug("Start SD card install\n\r");
+
+	// Card need of 74 cycles clock minimum to start
+	driver_send_clock();
+
+	// CMD0 - Reset all cards to idle state.
+	if (!driver_send_cmd(SDMMC_MCI_CMD0_GO_IDLE_STATE, 0)) {
+		return false;
+	}
+	if (!sd_cmd8(&v2)) {
+		return false;
+	}
+	// Try to get the SDIO card's operating condition
+	if (!sdio_op_cond()) {
+		return false;
+	}
+
+	if (sd_mmc_card->type & CARD_TYPE_SD) {
+		// Try to get the SD card's operating condition
+		if (!sd_mci_op_cond(v2)) {
+			// It is not a SD card
+			sd_mmc_debug("Start MMC Install\n\r");
+			sd_mmc_card->type = CARD_TYPE_MMC;
+			return sd_mmc_mci_install_mmc();
+		}
+	}
+
+	if (sd_mmc_card->type & CARD_TYPE_SD) {
+		// SD MEMORY, Put the Card in Identify Mode
+		// Note: The CID is not used in this stack
+		if (!driver_send_cmd(SDMMC_CMD2_ALL_SEND_CID, 0)) {
+			return false;
+		}
+	}
+	// Ask the card to publish a new relative address (RCA).
+	if (!driver_send_cmd(SD_CMD3_SEND_RELATIVE_ADDR, 0)) {
+		return false;
+	}
+	sd_mmc_card->rca = (driver_get_response() >> 16) & 0xFFFF;
+
+	// SD MEMORY, Get the Card-Specific Data
+	if (sd_mmc_card->type & CARD_TYPE_SD) {
+		if (!sd_mmc_cmd9_mci()) {
+			return false;
+		}
+		sd_decode_csd();
+	}
+	// Select the and put it into Transfer Mode
+	if (!driver_send_cmd(SDMMC_CMD7_SELECT_CARD_CMD,
+			(uint32_t)sd_mmc_card->rca << 16)) {
+		return false;
+	}
+	// SD MEMORY, Read the SCR to get card version
+	if (sd_mmc_card->type & CARD_TYPE_SD) {
+		if (!sd_acmd51()) {
+			return false;
+		}
+	}
+	if (IS_SDIO()) {
+		if (!sdio_get_max_speed()) {
+			return false;
+		}
+	}
+	if ((4 <= driver_get_bus_width(sd_mmc_slot_sel))) {
+		// TRY to enable 4-bit mode
+		if (IS_SDIO()) {
+			if (!sdio_cmd52_set_bus_width()) {
+				return false;
+			}
+		}
+		if (sd_mmc_card->type & CARD_TYPE_SD) {
+			if (!sd_acmd6()) {
+				return false;
+			}
+		}
+		// Switch to selected bus mode
+		sd_mmc_configure_slot();
+	}
+	if (driver_is_high_speed_capable()) {
+		// TRY to enable High-Speed Mode
+		if (IS_SDIO()) {
+			if (!sdio_cmd52_set_high_speed()) {
+				return false;
+			}
+		}
+		if (sd_mmc_card->type & CARD_TYPE_SD) {
+			if (sd_mmc_card->version > CARD_VER_SD_1_0) {
+				if (!sd_cm6_set_high_speed()) {
+					return false;
+				}
+			}
+		}
+		// Valid new configuration
+		sd_mmc_configure_slot();
+	}
+	// SD MEMORY, Set default block size
+	if (sd_mmc_card->type & CARD_TYPE_SD) {
+		if (!driver_send_cmd(SDMMC_CMD16_SET_BLOCKLEN, SD_MMC_BLOCK_SIZE)) {
+			return false;
+		}
+	}
+	return true;
+}
+
+/**
+ * \brief Initialize the MMC card in SPI mode.
+ *
+ * \note
+ * This function runs the initialization procedure and the identification
+ * process, then it sets the SD/MMC card in transfer state.
+ * At last, it will automaticly enable maximum bus width and transfer speed.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mmc_spi_install_mmc(void)
+{
+	uint8_t b_authorize_high_speed;
+
+	// CMD0 - Reset all cards to idle state.
+	if (!driver_send_cmd(SDMMC_SPI_CMD0_GO_IDLE_STATE, 0)) {
+		return false;
+	}
+
+	if (!mmc_spi_op_cond()) {
+		return false;
+	}
+
+	// Disable CRC check for SPI mode
+	if (!driver_send_cmd(SDMMC_SPI_CMD59_CRC_ON_OFF, 0)) {
+		return false;
+	}
+	// Get the Card-Specific Data
+	if (!sd_mmc_cmd9_spi()) {
+		return false;
+	}
+	mmc_decode_csd();
+	// For MMC 4.0 Higher version
+	if (sd_mmc_card->version >= CARD_VER_MMC_4) {
+		// Get EXT_CSD
+		if (!mmc_cmd8(&b_authorize_high_speed)) {
+			return false;
+		}
+	}
+	// Set default block size
+	if (!driver_send_cmd(SDMMC_CMD16_SET_BLOCKLEN, SD_MMC_BLOCK_SIZE)) {
+		return false;
+	}
+	// Check communication
+	if (!sd_mmc_cmd13()) {
+		return false;
+	}
+	// Reinitialize the slot with the new speed
+	sd_mmc_configure_slot();
+	return true;
+}
+
+
+/**
+ * \brief Initialize the MMC card in MCI mode.
+ *
+ * \note
+ * This function runs the initialization procedure and the identification
+ * process, then it sets the SD/MMC card in transfer state.
+ * At last, it will automaticly enable maximum bus width and transfer speed.
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mmc_mci_install_mmc(void)
+{
+	uint8_t b_authorize_high_speed;
+
+	// CMD0 - Reset all cards to idle state.
+	if (!driver_send_cmd(SDMMC_MCI_CMD0_GO_IDLE_STATE, 0)) {
+		return false;
+	}
+
+	if (!mmc_mci_op_cond()) {
+		return false;
+	}
+
+	// Put the Card in Identify Mode
+	// Note: The CID is not used in this stack
+	if (!driver_send_cmd(SDMMC_CMD2_ALL_SEND_CID, 0)) {
+		return false;
+	}
+	// Assign relative address to the card.
+	sd_mmc_card->rca = 1;
+	if (!driver_send_cmd(MMC_CMD3_SET_RELATIVE_ADDR,
+			(uint32_t)sd_mmc_card->rca << 16)) {
+		return false;
+	}
+	// Get the Card-Specific Data
+	if (!sd_mmc_cmd9_mci()) {
+		return false;
+	}
+	mmc_decode_csd();
+	// Select the and put it into Transfer Mode
+	if (!driver_send_cmd(SDMMC_CMD7_SELECT_CARD_CMD,
+			(uint32_t)sd_mmc_card->rca << 16)) {
+		return false;
+	}
+	if (sd_mmc_card->version >= CARD_VER_MMC_4) {
+		// For MMC 4.0 Higher version
+		// Get EXT_CSD
+		if (!mmc_cmd8(&b_authorize_high_speed)) {
+			return false;
+		}
+		if (4 <= driver_get_bus_width(sd_mmc_slot_sel)) {
+			// Enable more bus width
+			if (!mmc_cmd6_set_bus_width(driver_get_bus_width(sd_mmc_slot_sel))) {
+				return false;
+			}
+			// Reinitialize the slot with the bus width
+			sd_mmc_configure_slot();
+		}
+		if (driver_is_high_speed_capable() && b_authorize_high_speed) {
+			// Enable HS
+			if (!mmc_cmd6_set_high_speed()) {
+				return false;
+			}
+			// Reinitialize the slot with the new speed
+			sd_mmc_configure_slot();
+		}
+	} else {
+		// Reinitialize the slot with the new speed
+		sd_mmc_configure_slot();
+	}
+
+	uint8_t retry = 10;
+	while (retry--) {
+		// Retry is a WORKAROUND for no compliance card (Atmel Internal ref. MMC19):
+		// These cards seem not ready immediatly
+		// after the end of busy of mmc_cmd6_set_high_speed()
+
+		// Set default block size
+		if (driver_send_cmd(SDMMC_CMD16_SET_BLOCKLEN, SD_MMC_BLOCK_SIZE)) {
+			return true;
+		}
+	}
+	return false;
+}
+
+//-------------------------------------------------------------------
+//--------------------- PUBLIC FUNCTIONS ----------------------------
+
+void sd_mmc_init(void)
+{
+	//! Enable the PMC clock for the card detect pins
+#if (defined SD_MMC_0_CD_GPIO) && (!defined SAM4L)
+# include "pmc.h"
+# define SD_MMC_ENABLE_CD_PIN(slot, unused) \
+	pmc_enable_periph_clk(SD_MMC_##slot##_CD_PIO_ID);
+	MREPEAT(SD_MMC_MEM_CNT, SD_MMC_ENABLE_CD_PIN, ~)
+# undef SD_MMC_ENABLE_CD_PIN
+#endif
+	//! Enable the PMC clock for the card write protection pins
+#if (defined SD_MMC_0_WP_GPIO) && (!defined SAM4L)
+# include "pmc.h"
+# define SD_MMC_ENABLE_WP_PIN(slot, unused) \
+	pmc_enable_periph_clk(SD_MMC_##slot##_WP_PIO_ID);
+	MREPEAT(SD_MMC_MEM_CNT, SD_MMC_ENABLE_WP_PIN, ~)
+# undef SD_MMC_ENABLE_WP_PIN
+#endif
+	for (uint8_t slot = 0; slot < SD_MMC_MEM_CNT; slot++) {
+		sd_mmc_cards[slot].state = SD_MMC_CARD_STATE_NO_CARD;
+	}
+	sd_mmc_slot_sel = 0xFF; // No slot configurated
+	driver_init();
+}
+
+uint8_t sd_mmc_nb_slot(void)
+{
+	return SD_MMC_MEM_CNT;
+}
+
+sd_mmc_err_t sd_mmc_check(uint8_t slot)
+{
+	sd_mmc_err_t sd_mmc_err;
+
+	sd_mmc_err = sd_mmc_select_slot(slot);
+	if (sd_mmc_err != SD_MMC_INIT_ONGOING) {
+		sd_mmc_deselect_slot();
+		return sd_mmc_err;
+	}
+
+	// Initialization of the card requested
+	if (sd_mmc_is_spi()? sd_mmc_spi_card_init()
+			: sd_mmc_mci_card_init()) {
+		sd_mmc_debug("SD/MMC card ready\n\r");
+		sd_mmc_card->state = SD_MMC_CARD_STATE_READY;
+		sd_mmc_deselect_slot();
+		// To notify that the card has been just initialized
+		// It is necessary for USB Device MSC
+		return SD_MMC_INIT_ONGOING;
+	}
+	sd_mmc_debug("SD/MMC card initialization failed\n\r");
+	sd_mmc_card->state = SD_MMC_CARD_STATE_UNUSABLE;
+	sd_mmc_deselect_slot();
+	return SD_MMC_ERR_UNUSABLE;
+}
+
+card_type_t sd_mmc_get_type(uint8_t slot)
+{
+	if (SD_MMC_OK != sd_mmc_select_slot(slot)) {
+		return CARD_TYPE_UNKNOWN;
+	}
+	sd_mmc_deselect_slot();
+	return sd_mmc_card->type;
+}
+
+card_version_t sd_mmc_get_version(uint8_t slot)
+{
+	if (SD_MMC_OK != sd_mmc_select_slot(slot)) {
+		return CARD_VER_UNKNOWN;
+	}
+	sd_mmc_deselect_slot();
+	return sd_mmc_card->version;
+}
+
+uint32_t sd_mmc_get_capacity(uint8_t slot)
+{
+	if (SD_MMC_OK != sd_mmc_select_slot(slot)) {
+		return 0;
+	}
+	sd_mmc_deselect_slot();
+	return sd_mmc_card->capacity;
+}
+
+bool sd_mmc_is_write_protected(uint8_t slot)
+{
+	UNUSED(slot);
+#if (defined SD_MMC_0_WP_GPIO)
+	//! Card Detect pins
+	if (port_pin_get_input_level(sd_mmc_cards[slot].wp_gpio)
+			== SD_MMC_0_WP_DETECT_VALUE) {
+		return true;
+	}
+#endif
+	return false;
+}
+
+sd_mmc_err_t sd_mmc_init_read_blocks(uint8_t slot, uint32_t start,
+		uint16_t nb_block)
+{
+	sd_mmc_err_t sd_mmc_err;
+	uint32_t cmd, arg, resp;
+
+	sd_mmc_err = sd_mmc_select_slot(slot);
+	if (sd_mmc_err != SD_MMC_OK) {
+		return sd_mmc_err;
+	}
+
+	// Wait for data ready status
+	if (!sd_mmc_cmd13()) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+
+	if (nb_block > 1) {
+		cmd = SDMMC_CMD18_READ_MULTIPLE_BLOCK;
+	} else {
+		cmd = SDMMC_CMD17_READ_SINGLE_BLOCK;
+	}
+	/*
+	 * SDSC Card (CCS=0) uses byte unit address,
+	 * SDHC and SDXC Cards (CCS=1) use block unit address (512 Bytes unit).
+	 */
+	if (sd_mmc_card->type & CARD_TYPE_HC) {
+		arg = start;
+	} else {
+		arg = (start * SD_MMC_BLOCK_SIZE);
+	}
+
+	if (!driver_adtc_start(cmd, arg, SD_MMC_BLOCK_SIZE, nb_block, true)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+	// Check response
+	if (sd_mmc_is_mci()) {
+		resp = driver_get_response();
+		if (resp & CARD_STATUS_ERR_RD_WR) {
+			sd_mmc_debug("%s: Read blocks %02d resp32 0x%08x CARD_STATUS_ERR_RD_WR\n\r",
+					__func__, (int)SDMMC_CMD_GET_INDEX(cmd), resp);
+			sd_mmc_deselect_slot();
+			return SD_MMC_ERR_COMM;
+		}
+	}
+	sd_mmc_nb_block_remaining = nb_block;
+	sd_mmc_nb_block_to_tranfer = nb_block;
+	return SD_MMC_OK;
+}
+
+sd_mmc_err_t sd_mmc_start_read_blocks(void *dest, uint16_t nb_block)
+{
+	Assert(sd_mmc_nb_block_remaining >= nb_block);
+
+	if (!driver_start_read_blocks(dest, nb_block)) {
+		sd_mmc_nb_block_remaining = 0;
+		return SD_MMC_ERR_COMM;
+	}
+	sd_mmc_nb_block_remaining -= nb_block;
+	return SD_MMC_OK;
+}
+
+sd_mmc_err_t sd_mmc_wait_end_of_read_blocks(bool abort)
+{
+	if (!driver_wait_end_of_read_blocks()) {
+		return SD_MMC_ERR_COMM;
+	}
+	if (abort) {
+		sd_mmc_nb_block_remaining = 0;
+	} else if (sd_mmc_nb_block_remaining) {
+		return SD_MMC_OK;
+	}
+
+	// All blocks are transfered then stop read operation
+	if (sd_mmc_nb_block_to_tranfer == 1) {
+		// Single block transfer, then nothing to do
+		sd_mmc_deselect_slot();
+		return SD_MMC_OK;
+	}
+	// WORKAROUND for no compliance card (Atmel Internal ref. !MMC7 !SD19):
+	// The errors on this command must be ignored
+	// and one retry can be necessary in SPI mode for no compliance card.
+	if (!driver_adtc_stop(SDMMC_CMD12_STOP_TRANSMISSION, 0)) {
+		driver_adtc_stop(SDMMC_CMD12_STOP_TRANSMISSION, 0);
+	}
+	sd_mmc_deselect_slot();
+	return SD_MMC_OK;
+}
+
+sd_mmc_err_t sd_mmc_init_write_blocks(uint8_t slot, uint32_t start,
+		uint16_t nb_block)
+{
+	sd_mmc_err_t sd_mmc_err;
+	uint32_t cmd, arg, resp;
+
+	sd_mmc_err = sd_mmc_select_slot(slot);
+	if (sd_mmc_err != SD_MMC_OK) {
+		return sd_mmc_err;
+	}
+	if (sd_mmc_is_write_protected(slot)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_WP;
+	}
+
+	if (nb_block > 1) {
+		cmd = SDMMC_CMD25_WRITE_MULTIPLE_BLOCK;
+	} else {
+		cmd = SDMMC_CMD24_WRITE_BLOCK;
+	}
+	/*
+	 * SDSC Card (CCS=0) uses byte unit address,
+	 * SDHC and SDXC Cards (CCS=1) use block unit address (512 Bytes unit).
+	 */
+	if (sd_mmc_card->type & CARD_TYPE_HC) {
+		arg = start;
+	} else {
+		arg = (start * SD_MMC_BLOCK_SIZE);
+	}
+	if (!driver_adtc_start(cmd, arg, SD_MMC_BLOCK_SIZE, nb_block, true)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+	// Check response
+	if (sd_mmc_is_mci()) {
+		resp = driver_get_response();
+		if (resp & CARD_STATUS_ERR_RD_WR) {
+			sd_mmc_debug("%s: Write blocks %02d r1 0x%08x CARD_STATUS_ERR_RD_WR\n\r",
+					__func__, (int)SDMMC_CMD_GET_INDEX(cmd), resp);
+			sd_mmc_deselect_slot();
+			return SD_MMC_ERR_COMM;
+		}
+	}
+	sd_mmc_nb_block_remaining = nb_block;
+	sd_mmc_nb_block_to_tranfer = nb_block;
+	return SD_MMC_OK;
+}
+
+sd_mmc_err_t sd_mmc_start_write_blocks(const void *src, uint16_t nb_block)
+{
+	Assert(sd_mmc_nb_block_remaining >= nb_block);
+	if (!driver_start_write_blocks(src, nb_block)) {
+		sd_mmc_nb_block_remaining = 0;
+		return SD_MMC_ERR_COMM;
+	}
+	sd_mmc_nb_block_remaining -= nb_block;
+	return SD_MMC_OK;
+}
+
+sd_mmc_err_t sd_mmc_wait_end_of_write_blocks(bool abort)
+{
+	if (!driver_wait_end_of_write_blocks()) {
+		return SD_MMC_ERR_COMM;
+	}
+	if (abort) {
+		sd_mmc_nb_block_remaining = 0;
+	} else if (sd_mmc_nb_block_remaining) {
+		return SD_MMC_OK;
+	}
+
+	// All blocks are transfered then stop write operation
+	if (sd_mmc_nb_block_to_tranfer == 1) {
+		// Single block transfer, then nothing to do
+		sd_mmc_deselect_slot();
+		return SD_MMC_OK;
+	}
+
+	if (sd_mmc_is_mci()) {
+		// Note: SPI multiblock writes terminate using a special
+		// token, not a STOP_TRANSMISSION request.
+		if (!driver_adtc_stop(SDMMC_CMD12_STOP_TRANSMISSION, 0)) {
+			sd_mmc_deselect_slot();
+			return SD_MMC_ERR_COMM;
+		}
+	}
+	sd_mmc_deselect_slot();
+	return SD_MMC_OK;
+}
+
+#ifdef SDIO_SUPPORT_ENABLE
+sd_mmc_err_t sdio_read_direct(uint8_t slot, uint8_t func_num, uint32_t addr,
+		uint8_t *dest)
+{
+	sd_mmc_err_t sd_mmc_err;
+
+	if (dest == NULL) {
+		return SD_MMC_ERR_PARAM;
+	}
+
+	sd_mmc_err = sd_mmc_select_slot(slot);
+	if (sd_mmc_err != SD_MMC_OK) {
+		return sd_mmc_err;
+	}
+
+	if (!sdio_cmd52(SDIO_CMD52_READ_FLAG, func_num, addr, 0, dest)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+	sd_mmc_deselect_slot();
+	return SD_MMC_OK;
+}
+
+sd_mmc_err_t sdio_write_direct(uint8_t slot, uint8_t func_num, uint32_t addr,
+		uint8_t data)
+{
+	sd_mmc_err_t sd_mmc_err;
+
+	sd_mmc_err = sd_mmc_select_slot(slot);
+	if (sd_mmc_err != SD_MMC_OK) {
+		return sd_mmc_err;
+	}
+
+	if (!sdio_cmd52(SDIO_CMD52_WRITE_FLAG, func_num, addr, 0, &data)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+
+	sd_mmc_deselect_slot();
+	return SD_MMC_OK;
+}
+
+sd_mmc_err_t sdio_read_extended(uint8_t slot, uint8_t func_num, uint32_t addr,
+		uint8_t inc_addr, uint8_t *dest, uint16_t size)
+{
+	sd_mmc_err_t sd_mmc_err;
+
+	if ((size == 0) || (size > 512)) {
+		return SD_MMC_ERR_PARAM;
+	}
+
+	sd_mmc_err = sd_mmc_select_slot(slot);
+	if (sd_mmc_err != SD_MMC_OK) {
+		return sd_mmc_err;
+	}
+
+	if (!sdio_cmd53(SDIO_CMD53_READ_FLAG, func_num, addr, inc_addr,
+			size, true)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+	if (!driver_start_read_blocks(dest, 1)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+	if (!driver_wait_end_of_read_blocks()) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+
+	sd_mmc_deselect_slot();
+	return SD_MMC_OK;
+}
+
+sd_mmc_err_t sdio_write_extended(uint8_t slot, uint8_t func_num, uint32_t addr,
+		uint8_t inc_addr, uint8_t *src, uint16_t size)
+{
+	sd_mmc_err_t sd_mmc_err;
+
+	if ((size == 0) || (size > 512)) {
+		return SD_MMC_ERR_PARAM;
+	}
+
+	sd_mmc_err = sd_mmc_select_slot(slot);
+	if (sd_mmc_err != SD_MMC_OK) {
+		return sd_mmc_err;
+	}
+
+	if (!sdio_cmd53(SDIO_CMD53_WRITE_FLAG, func_num, addr, inc_addr,
+			size, true)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+	if (!driver_start_write_blocks(src, 1)) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+	if (!driver_wait_end_of_write_blocks()) {
+		sd_mmc_deselect_slot();
+		return SD_MMC_ERR_COMM;
+	}
+
+	sd_mmc_deselect_slot();
+	return SD_MMC_OK;
+}
+#endif // SDIO_SUPPORT_ENABLE
+
+//! @}
diff --git a/common2/components/memory/sd_mmc/sd_mmc.h b/common2/components/memory/sd_mmc/sd_mmc.h
new file mode 100644
index 00000000..74521e3b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/sd_mmc.h
@@ -0,0 +1,313 @@
+/**
+ * \file
+ *
+ * \brief Common SD/MMC stack header file
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef SD_MMC_H_INCLUDED
+#define SD_MMC_H_INCLUDED
+
+#include "compiler.h"
+#include "conf_sd_mmc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup common_memory
+ * \defgroup sd_mmc_stack_group SD/MMC/SDIO common stack
+ *
+ * SD/MMC/SDIO basic APIs used by SD/MMC/SDIO memory
+ * APIs (\ref sd_mmc_stack_mem_group).
+ * Also, it can be used by application which use the SDIO card
+ * or specific application which does not need of File System.
+ *
+ * For usual application which use the SD/MMC card in
+ * memory mode with a file system, please refer to
+ * \ref sd_mmc_stack_mem_group.
+ * @{
+ */
+
+typedef uint8_t sd_mmc_err_t; //!< Type of return error code
+
+//! \name Return error codes
+//! @{
+#define SD_MMC_OK               0    //! No error
+#define SD_MMC_INIT_ONGOING     1    //! Card not initialized
+#define SD_MMC_ERR_NO_CARD      2    //! No SD/MMC card inserted
+#define SD_MMC_ERR_UNUSABLE     3    //! Unusable card
+#define SD_MMC_ERR_SLOT         4    //! Slot unknow
+#define SD_MMC_ERR_COMM         5    //! General communication error
+#define SD_MMC_ERR_PARAM        6    //! Illeage input parameter
+#define SD_MMC_ERR_WP           7    //! Card write protected
+//! @}
+
+typedef uint8_t card_type_t; //!< Type of card type
+
+//! \name Card Types
+//! @{
+#define CARD_TYPE_UNKNOWN   (0)      //!< Unknown type card
+#define CARD_TYPE_SD        (1 << 0) //!< SD card
+#define CARD_TYPE_MMC       (1 << 1) //!< MMC card
+#define CARD_TYPE_SDIO      (1 << 2) //!< SDIO card
+#define CARD_TYPE_HC        (1 << 3) //!< High capacity card
+//! SD combo card (io + memory)
+#define CARD_TYPE_SD_COMBO  (CARD_TYPE_SD | CARD_TYPE_SDIO)
+//! @}
+
+typedef uint8_t card_version_t; //!< Type of card version
+
+//! \name Card Versions
+//! @{
+#define CARD_VER_UNKNOWN   (0)       //! Unknown card version
+#define CARD_VER_SD_1_0    (0x10)    //! SD version 1.0 and 1.01
+#define CARD_VER_SD_1_10   (0x1A)    //! SD version 1.10
+#define CARD_VER_SD_2_0    (0X20)    //! SD version 2.00
+#define CARD_VER_SD_3_0    (0X30)    //! SD version 3.0X
+#define CARD_VER_MMC_1_2   (0x12)    //! MMC version 1.2
+#define CARD_VER_MMC_1_4   (0x14)    //! MMC version 1.4
+#define CARD_VER_MMC_2_2   (0x22)    //! MMC version 2.2
+#define CARD_VER_MMC_3     (0x30)    //! MMC version 3
+#define CARD_VER_MMC_4     (0x40)    //! MMC version 4
+//! @}
+
+//! This SD MMC stack uses the maximum block size autorized (512 bytes)
+#define SD_MMC_BLOCK_SIZE          512
+
+/**
+ * \brief Initialize the SD/MMC stack and low level driver required
+ */
+void sd_mmc_init(void);
+
+/** \brief Return the number of slot available
+ *
+ * \return Number of card slot available
+ */
+uint8_t sd_mmc_nb_slot(void);
+
+/** \brief Performs a card checks
+ *
+ * \param slot     Card slot to use
+ *
+ * \retval SD_MMC_OK           Card ready
+ * \retval SD_MMC_INIT_ONGOING Initialization on going
+ * \retval SD_MMC_ERR_NO_CARD  Card not present in slot
+ * \retval Other value for error cases, see \ref sd_mmc_err_t
+ */
+sd_mmc_err_t sd_mmc_check(uint8_t slot);
+
+/** \brief Get the card type
+ *
+ * \param slot     Card slot
+ *
+ * \return Card type (\ref card_type_t)
+ */
+card_type_t sd_mmc_get_type(uint8_t slot);
+
+/** \brief Get the card version
+ *
+ * \param slot     Card slot
+ *
+ * \return Card version (\ref card_version_t)
+ */
+card_version_t sd_mmc_get_version(uint8_t slot);
+
+/** \brief Get the memory capacity
+ *
+ * \param slot     Card slot
+ *
+ * \return Capacity (unit KB)
+ */
+uint32_t sd_mmc_get_capacity(uint8_t slot);
+
+/** \brief Get the card write protection status
+ *
+ * \param slot     Card slot
+ *
+ * \return true, if write portected
+ */
+bool sd_mmc_is_write_protected(uint8_t slot);
+
+/**
+ * \brief Initialize the read blocks of data from the card.
+ *
+ * \param slot     Card slot to use
+ * \param start    Start block number to to read.
+ * \param nb_block Total number of blocks to be read.
+ *
+ * \return return SD_MMC_OK if success,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sd_mmc_init_read_blocks(uint8_t slot, uint32_t start,
+		uint16_t nb_block);
+
+/**
+ * \brief Start the read blocks of data from the card.
+ *
+ * \param dest     Pointer to read buffer.
+ * \param nb_block Number of blocks to be read.
+ *
+ * \return return SD_MMC_OK if started,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sd_mmc_start_read_blocks(void *dest, uint16_t nb_block);
+
+/**
+ * \brief Wait the end of read blocks of data from the card.
+ *
+ * \param abort Abort reading process initialized by
+ *              \ref sd_mmc_init_read_blocks() after the reading issued by
+ *              \ref sd_mmc_start_read_blocks() is done
+ *
+ * \return return SD_MMC_OK if success,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sd_mmc_wait_end_of_read_blocks(bool abort);
+
+/**
+ * \brief Initialize the write blocks of data
+ *
+ * \param slot     Card slot to use
+ * \param start    Start block number to be written.
+ * \param nb_block Total number of blocks to be written.
+ *
+ * \return return SD_MMC_OK if success,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sd_mmc_init_write_blocks(uint8_t slot, uint32_t start,
+		uint16_t nb_block);
+
+/**
+ * \brief Start the write blocks of data
+ *
+ * \param src      Pointer to write buffer.
+ * \param nb_block Number of blocks to be written.
+ *
+ * \return return SD_MMC_OK if started,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sd_mmc_start_write_blocks(const void *src, uint16_t nb_block);
+
+/**
+ * \brief Wait the end of write blocks of data
+ *
+ * \param abort Abort writing process initialized by
+ *              \ref sd_mmc_init_write_blocks() after the writing issued by
+ *              \ref sd_mmc_start_write_blocks() is done
+ *
+ * \return return SD_MMC_OK if success,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sd_mmc_wait_end_of_write_blocks(bool abort);
+
+#ifdef SDIO_SUPPORT_ENABLE
+/**
+ * \brief Read one byte from SDIO using RW_DIRECT command.
+ *
+ * \param slot     Card slot to use
+ * \param func_num  Function number.
+ * \param addr      Register address to read from.
+ * \param dest      Pointer to read buffer.
+ *
+ * \return return SD_MMC_OK if success,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sdio_read_direct(uint8_t slot, uint8_t func_num, uint32_t addr,
+		uint8_t *dest);
+/**
+ * \brief Write one byte to SDIO using RW_DIRECT command.
+ *
+ * \param slot     Card slot to use
+ * \param func_num  Function number.
+ * \param addr      Register address to read from.
+ * \param data      Data to be written.
+ *
+ * \return return SD_MMC_OK if success,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sdio_write_direct(uint8_t slot, uint8_t func_num, uint32_t addr,
+		uint8_t data);
+
+/**
+ * \brief Read bytes from SDIO using RW_EXTENDED command.
+ *
+ * \param slot     Card slot to use
+ * \param func_num     Function number.
+ * \param addr         First register address to read from.
+ * \param inc_addr     0 - The data address is fixed.
+ *                     1 - The data address increase automatically.
+ * \param dest         Pointer to read buffer.
+ * \param size         Number of bytes to read (1 ~ 512).
+ *
+ * \return return SD_MMC_OK if success,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sdio_read_extended(uint8_t slot, uint8_t func_num, uint32_t addr,
+		uint8_t inc_addr, uint8_t *dest, uint16_t size);
+
+/**
+ * \brief Write bytes to SDIO using RW_EXTENDED command.
+ *
+ * \param slot     Card slot to use
+ * \param func_num     Function number.
+ * \param addr         First register address to write to.
+ * \param inc_addr     0 - The data address is fixed.
+ *                     1 - The data address increase automatically.
+ * \param src          Pointer to write buffer.
+ * \param size         Number of bytes to read (1 ~ 512).
+ *
+ * \return return SD_MMC_OK if success,
+ *         otherwise return an error code (\ref sd_mmc_err_t).
+ */
+sd_mmc_err_t sdio_write_extended(uint8_t slot, uint8_t func_num, uint32_t addr,
+		uint8_t inc_addr, uint8_t *src, uint16_t size);
+#endif // SDIO_SUPPORT_ENABLE
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SD_MMC_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/sd_mmc_mem.c b/common2/components/memory/sd_mmc/sd_mmc_mem.c
new file mode 100644
index 00000000..894d46a4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/sd_mmc_mem.c
@@ -0,0 +1,369 @@
+/**
+ * \file
+ *
+ * \brief CTRL_ACCESS interface for common SD/MMC stack
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "conf_access.h"
+
+#if (SD_MMC_0_MEM == ENABLE) || (SD_MMC_1_MEM == ENABLE)
+
+#include "conf_sd_mmc.h"
+#include "sd_mmc.h"
+#include "sd_mmc_mem.h"
+
+/**
+ * \ingroup sd_mmc_stack_mem
+ * \defgroup sd_mmc_stack_mem_internal Implementation of SD/MMC Memory
+ * @{
+ */
+
+/**
+ * \name Control Interface
+ * @{
+ */
+
+static bool sd_mmc_ejected[2] = {false, false};
+
+Ctrl_status sd_mmc_test_unit_ready(uint8_t slot)
+{
+	switch (sd_mmc_check(slot))
+	{
+	case SD_MMC_OK:
+		if (sd_mmc_ejected[slot]) {
+			return CTRL_NO_PRESENT;
+		}
+		if (sd_mmc_get_type(slot) & (CARD_TYPE_SD | CARD_TYPE_MMC)) {
+			return CTRL_GOOD;
+		}
+		// It is not a memory card
+		return CTRL_NO_PRESENT;
+
+	case SD_MMC_INIT_ONGOING:
+		return CTRL_BUSY;
+
+	case SD_MMC_ERR_NO_CARD:
+		sd_mmc_ejected[slot] = false;
+		return CTRL_NO_PRESENT;
+
+	default:
+		return CTRL_FAIL;
+	}
+}
+
+Ctrl_status sd_mmc_test_unit_ready_0(void)
+{
+	return sd_mmc_test_unit_ready(0);
+}
+
+
+Ctrl_status sd_mmc_test_unit_ready_1(void)
+{
+	return sd_mmc_test_unit_ready(1);
+}
+
+Ctrl_status sd_mmc_read_capacity(uint8_t slot, uint32_t *nb_sector)
+{
+	// Return last sector address (-1)
+	*nb_sector = (sd_mmc_get_capacity(slot) * 2) - 1;
+	return sd_mmc_test_unit_ready(slot);
+}
+
+Ctrl_status sd_mmc_read_capacity_0(uint32_t *nb_sector)
+{
+	return sd_mmc_read_capacity(0, nb_sector);
+}
+
+Ctrl_status sd_mmc_read_capacity_1(uint32_t *nb_sector)
+{
+	return sd_mmc_read_capacity(1, nb_sector);
+}
+
+bool sd_mmc_unload(uint8_t slot, bool unload)
+{
+	sd_mmc_ejected[slot] = unload;
+	return true;
+}
+
+bool sd_mmc_unload_0(bool unload)
+{
+	return sd_mmc_unload(0, unload);
+}
+
+bool sd_mmc_unload_1(bool unload)
+{
+	return sd_mmc_unload(1, unload);
+}
+
+bool sd_mmc_wr_protect(uint8_t slot)
+{
+	return sd_mmc_is_write_protected(slot);
+}
+
+bool sd_mmc_wr_protect_0(void)
+{
+	return sd_mmc_wr_protect(0);
+}
+
+bool sd_mmc_wr_protect_1(void)
+{
+	return sd_mmc_wr_protect(1);
+}
+
+bool sd_mmc_removal(uint8_t slot)
+{
+	UNUSED(slot);
+	return true;
+}
+
+bool sd_mmc_removal_0(void)
+{
+	return sd_mmc_removal(0);
+}
+
+bool sd_mmc_removal_1(void)
+{
+	return sd_mmc_removal(1);
+}
+//! @}
+
+#if ACCESS_USB == true
+/**
+ * \name MEM <-> USB Interface
+ * @{
+ */
+
+#include "udi_msc.h"
+
+COMPILER_WORD_ALIGNED
+uint8_t sector_buf_0[SD_MMC_BLOCK_SIZE];
+
+COMPILER_WORD_ALIGNED
+uint8_t sector_buf_1[SD_MMC_BLOCK_SIZE];
+
+Ctrl_status sd_mmc_usb_read_10(uint8_t slot, uint32_t addr, uint16_t nb_sector)
+{
+	bool b_first_step = true;
+	uint16_t nb_step;
+
+	switch (sd_mmc_init_read_blocks(slot, addr, nb_sector)) {
+	case SD_MMC_OK:
+		break;
+	case SD_MMC_ERR_NO_CARD:
+		return CTRL_NO_PRESENT;
+	default:
+		return CTRL_FAIL;
+	}
+	// Pipeline the 2 transfer in order to speed-up the performances
+	nb_step = nb_sector + 1;
+	while (nb_step--) {
+		if (nb_step) { // Skip last step
+			// MCI -> RAM
+			if (SD_MMC_OK != sd_mmc_start_read_blocks(((nb_step % 2) == 0) ?
+					sector_buf_0 : sector_buf_1, 1)) {
+				return CTRL_FAIL;
+			}
+		}
+		if (!b_first_step) { // Skip first step
+			// RAM -> USB
+			if (!udi_msc_trans_block(true,
+					((nb_step % 2) == 0) ?
+					sector_buf_1 : sector_buf_0,
+					SD_MMC_BLOCK_SIZE,
+					NULL)) {
+				if (!b_first_step) {
+					sd_mmc_wait_end_of_read_blocks(true);
+				}
+				return CTRL_FAIL;
+			}
+		} else {
+			b_first_step = false;
+		}
+		if (nb_step) { // Skip last step
+			if (SD_MMC_OK != sd_mmc_wait_end_of_read_blocks(false)) {
+				return CTRL_FAIL;
+			}
+		}
+		b_first_step = false;
+	}
+	return CTRL_GOOD;
+}
+
+Ctrl_status sd_mmc_usb_read_10_0(uint32_t addr, uint16_t nb_sector)
+{
+	return sd_mmc_usb_read_10(0, addr, nb_sector);
+}
+
+Ctrl_status sd_mmc_usb_read_10_1(uint32_t addr, uint16_t nb_sector)
+{
+	return sd_mmc_usb_read_10(1, addr, nb_sector);
+}
+
+Ctrl_status sd_mmc_usb_write_10(uint8_t slot, uint32_t addr, uint16_t nb_sector)
+{
+	bool b_first_step = true;
+	uint16_t nb_step;
+
+	switch (sd_mmc_init_write_blocks(slot, addr, nb_sector)) {
+	case SD_MMC_OK:
+		break;
+	case SD_MMC_ERR_NO_CARD:
+		return CTRL_NO_PRESENT;
+	default:
+		return CTRL_FAIL;
+	}
+	// Pipeline the 2 transfer in order to speed-up the performances
+	nb_step = nb_sector + 1;
+	while (nb_step--) {
+		if (!b_first_step) { // Skip first step
+			// RAM -> MCI
+			if (SD_MMC_OK != sd_mmc_start_write_blocks(((nb_step % 2) == 0) ?
+					sector_buf_0 : sector_buf_1, 1)) {
+				return CTRL_FAIL;
+			}
+		}
+		if (nb_step) { // Skip last step
+			// USB -> RAM
+			if (!udi_msc_trans_block(false,
+					((nb_step % 2) == 0) ?
+					sector_buf_1 : sector_buf_0,
+					SD_MMC_BLOCK_SIZE,
+					NULL)) {
+				if (!b_first_step) {
+					sd_mmc_wait_end_of_write_blocks(true);
+				}
+				return CTRL_FAIL;
+			}
+		}
+		if (!b_first_step) { // Skip first step
+			if (SD_MMC_OK != sd_mmc_wait_end_of_write_blocks(false)) {
+				return CTRL_FAIL;
+			}
+		} else {
+			b_first_step = false;
+		}
+	}
+	return CTRL_GOOD;
+}
+
+Ctrl_status sd_mmc_usb_write_10_0(uint32_t addr, uint16_t nb_sector)
+{
+	return sd_mmc_usb_write_10(0, addr, nb_sector);
+}
+
+Ctrl_status sd_mmc_usb_write_10_1(uint32_t addr, uint16_t nb_sector)
+{
+	return sd_mmc_usb_write_10(1, addr, nb_sector);
+}
+//! @}
+#endif // ACCESS_USB == true
+
+
+#if ACCESS_MEM_TO_RAM == true
+/**
+ * \name MEM <-> RAM Interface
+ * @{
+ */
+Ctrl_status sd_mmc_mem_2_ram(uint8_t slot, uint32_t addr, void *ram)
+{
+	switch (sd_mmc_init_read_blocks(slot, addr, 1)) {
+	case SD_MMC_OK:
+		break;
+	case SD_MMC_ERR_NO_CARD:
+		return CTRL_NO_PRESENT;
+	default:
+		return CTRL_FAIL;
+	}
+	if (SD_MMC_OK != sd_mmc_start_read_blocks(ram, 1)) {
+		return CTRL_FAIL;
+	}
+	if (SD_MMC_OK != sd_mmc_wait_end_of_read_blocks(false)) {
+		return CTRL_FAIL;
+	}
+	return CTRL_GOOD;
+}
+
+Ctrl_status sd_mmc_mem_2_ram_0(uint32_t addr, void *ram)
+{
+	return sd_mmc_mem_2_ram(0, addr, ram);
+}
+
+Ctrl_status sd_mmc_mem_2_ram_1(uint32_t addr, void *ram)
+{
+	return sd_mmc_mem_2_ram(1, addr, ram);
+}
+
+Ctrl_status sd_mmc_ram_2_mem(uint8_t slot, uint32_t addr, const void *ram)
+{
+	switch (sd_mmc_init_write_blocks(slot, addr, 1)) {
+	case SD_MMC_OK:
+		break;
+	case SD_MMC_ERR_NO_CARD:
+		return CTRL_NO_PRESENT;
+	default:
+		return CTRL_FAIL;
+	}
+	if (SD_MMC_OK != sd_mmc_start_write_blocks(ram, 1)) {
+		return CTRL_FAIL;
+	}
+	if (SD_MMC_OK != sd_mmc_wait_end_of_write_blocks(false)) {
+		return CTRL_FAIL;
+	}
+	return CTRL_GOOD;
+}
+
+Ctrl_status sd_mmc_ram_2_mem_0(uint32_t addr, const void *ram)
+{
+	return sd_mmc_ram_2_mem(0, addr, ram);
+}
+
+Ctrl_status sd_mmc_ram_2_mem_1(uint32_t addr, const void *ram)
+{
+	return sd_mmc_ram_2_mem(1, addr, ram);
+}
+//! @}
+
+//! @}
+#endif // ACCESS_MEM_TO_RAM == true
+
+#endif // SD_MMC_0_MEM == ENABLE || SD_MMC_1_MEM == ENABLE
diff --git a/common2/components/memory/sd_mmc/sd_mmc_mem.h b/common2/components/memory/sd_mmc/sd_mmc_mem.h
new file mode 100644
index 00000000..68964d83
--- /dev/null
+++ b/common2/components/memory/sd_mmc/sd_mmc_mem.h
@@ -0,0 +1,228 @@
+/**
+ * \file
+ *
+ * \brief CTRL_ACCESS interface for common SD/MMC stack
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _SD_MMC_MEM_H_
+#define _SD_MMC_MEM_H_
+
+/**
+ * \ingroup sd_mmc_stack_group
+ * \defgroup sd_mmc_stack_mem SD/MMC Memory
+ *
+ * SD/MMC memory APIs required by CTRL_ACCESS module
+ * (\ref group_common_services_storage_ctrl_access).
+ *
+ * For usual application which use the SD/MMC card in
+ * memory mode through a file system or a USB device MSC,
+ * only a call of \ref sd_mmc_init() function is required in the startup.
+ *
+ * @{
+ */
+
+#include "conf_access.h"
+#include "ctrl_access.h"
+
+#if (SD_MMC_0_MEM == ENABLE) || (SD_MMC_1_MEM == ENABLE)
+
+/*! \name Control Interface
+ */
+//! @{
+
+/*! \brief Tests the memory state and initializes the memory if required.
+ *
+ * The TEST UNIT READY SCSI primary command allows an application client to poll
+ * a LUN until it is ready without having to allocate memory for returned data.
+ *
+ * This command may be used to check the media status of LUNs with removable
+ * media.
+ *
+ * \param slot SD/MMC Slot Card Selected.
+ *
+ * \return Status.
+ */
+extern Ctrl_status sd_mmc_test_unit_ready(uint8_t slot);
+//! Instance Declaration for sd_mmc_test_unit_ready Slot O
+extern Ctrl_status sd_mmc_test_unit_ready_0(void);
+//! Instance Declaration for sd_mmc_test_unit_ready Slot 1
+extern Ctrl_status sd_mmc_test_unit_ready_1(void);
+
+/*! \brief Returns the address of the last valid sector in the memory.
+ *
+ * \param slot SD/MMC Slot Card Selected.
+ * \param u32_nb_sector Pointer to the address of the last valid sector.
+ *
+ * \return Status.
+ */
+extern Ctrl_status sd_mmc_read_capacity(uint8_t slot,uint32_t *u32_nb_sector);
+//! Instance Declaration for sd_mmc_read_capacity Slot O
+extern Ctrl_status sd_mmc_read_capacity_0(uint32_t *u32_nb_sector);
+//! Instance Declaration for sd_mmc_read_capacity Slot 1
+extern Ctrl_status sd_mmc_read_capacity_1(uint32_t *u32_nb_sector);
+
+/*! \brief Unload/Load the SD/MMC card selected
+ *
+ * The START STOP UNIT SCSI optional command allows an application client to
+ * eject the removable medium on a LUN.
+ *
+ * \param slot SD/MMC Slot Card Selected.
+ * \param unload \c true to unload the medium, \c false to load the medium.
+ *
+ * \return \c true if unload/load done success.
+ */
+extern bool sd_mmc_unload(uint8_t slot, bool unload);
+//! Instance Declaration for sd_mmc_unload Slot O
+extern bool sd_mmc_unload_0(bool unload);
+//! Instance Declaration for sd_mmc_unload Slot 1
+extern bool sd_mmc_unload_1(bool unload);
+
+/*! \brief Returns the write-protection state of the memory.
+ *
+*  \param slot SD/MMC Slot Card Selected.
+ * \return \c true if the memory is write-protected, else \c false.
+ *
+ * \note Only used by removable memories with hardware-specific write
+ *       protection.
+ */
+extern bool sd_mmc_wr_protect(uint8_t slot);
+//! Instance Declaration for sd_mmc_wr_protect Slot O
+extern bool sd_mmc_wr_protect_0(void);
+//! Instance Declaration for sd_mmc_wr_protect Slot 1
+extern bool sd_mmc_wr_protect_1(void);
+
+/*! \brief Tells whether the memory is removable.
+ *
+ * \param slot SD/MMC Slot Card Selected.
+ * \return \c true if the memory is removable, else \c false.
+ */
+extern bool sd_mmc_removal(uint8_t slot);
+//! Instance Declaration for sd_mmc_removal Slot O
+extern bool sd_mmc_removal_0(void);
+//! Instance Declaration for sd_mmc_removal Slot 1
+extern bool sd_mmc_removal_1(void);
+
+//! @}
+
+
+#if ACCESS_USB == true
+
+/*! \name MEM <-> USB Interface
+ */
+//! @{
+
+/*! \brief Transfers data from the memory to USB.
+ *
+ * \param slot SD/MMC Slot Card Selected.
+ * \param addr      Address of first memory sector to read.
+ * \param nb_sector Number of sectors to transfer.
+ *
+ * \return Status.
+ */
+extern Ctrl_status sd_mmc_usb_read_10(uint8_t slot,uint32_t addr, uint16_t nb_sector);
+//! Instance Declaration for sd_mmc_usb_read_10 Slot O
+extern Ctrl_status sd_mmc_usb_read_10_0(uint32_t addr, uint16_t nb_sector);
+//! Instance Declaration for sd_mmc_usb_read_10 Slot 1
+extern Ctrl_status sd_mmc_usb_read_10_1(uint32_t addr, uint16_t nb_sector);
+
+/*! \brief Transfers data from USB to the memory.
+ *
+ * \param slot SD/MMC Slot Card Selected.
+ * \param addr      Address of first memory sector to write.
+ * \param nb_sector Number of sectors to transfer.
+ *
+ * \return Status.
+ */
+extern Ctrl_status sd_mmc_usb_write_10(uint8_t slot,uint32_t addr, uint16_t nb_sector);
+//! Instance Declaration for sd_mmc_usb_write_10 Slot O
+extern Ctrl_status sd_mmc_usb_write_10_0(uint32_t addr, uint16_t nb_sector);
+//! Instance Declaration for sd_mmc_usb_write_10 Slot 1
+extern Ctrl_status sd_mmc_usb_write_10_1(uint32_t addr, uint16_t nb_sector);
+
+//! @}
+
+#endif
+
+
+#if ACCESS_MEM_TO_RAM == true
+
+/*! \name MEM <-> RAM Interface
+ */
+//! @{
+
+/*! \brief Copies 1 data sector from the memory to RAM.
+ *
+ * \param slot SD/MMC Slot Card Selected.
+ * \param addr  Address of first memory sector to read.
+ * \param ram   Pointer to RAM buffer to write.
+ *
+ * \return Status.
+ */
+extern Ctrl_status sd_mmc_mem_2_ram(uint8_t slot, uint32_t addr, void *ram);
+//! Instance Declaration for sd_mmc_mem_2_ram Slot O
+extern Ctrl_status sd_mmc_mem_2_ram_0(uint32_t addr, void *ram);
+//! Instance Declaration for sd_mmc_mem_2_ram Slot 1
+extern Ctrl_status sd_mmc_mem_2_ram_1(uint32_t addr, void *ram);
+
+/*! \brief Copies 1 data sector from RAM to the memory.
+ *
+ * \param slot SD/MMC Slot Card Selected.
+ * \param addr  Address of first memory sector to write.
+ * \param ram   Pointer to RAM buffer to read.
+ *
+ * \return Status.
+ */
+extern Ctrl_status sd_mmc_ram_2_mem(uint8_t slot, uint32_t addr, const void *ram);
+//! Instance Declaration for sd_mmc_mem_2_ram Slot O
+extern Ctrl_status sd_mmc_ram_2_mem_0(uint32_t addr, const void *ram);
+//! Instance Declaration for sd_mmc_mem_2_ram Slot 1
+extern Ctrl_status sd_mmc_ram_2_mem_1(uint32_t addr, const void *ram);
+
+//! @}
+
+#endif
+#endif
+
+//! @}
+
+#endif // _SD_MMC_MEM_H_
diff --git a/common2/components/memory/sd_mmc/sd_mmc_protocol.h b/common2/components/memory/sd_mmc/sd_mmc_protocol.h
new file mode 100644
index 00000000..fc0e166f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/sd_mmc_protocol.h
@@ -0,0 +1,1007 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC protocol definitions.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef SD_MMC_PROTOCOL_H_INCLUDED
+#define SD_MMC_PROTOCOL_H_INCLUDED
+
+#include  "compiler.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \addtogroup sd_mmc_protocol SD/MMC Protocol Definition
+ * \ingroup sd_mmc_stack_group
+ * @{
+ */
+
+// SD/MMC/SDIO default clock frequency for initialization (400KHz)
+#define SDMMC_CLOCK_INIT   400000
+
+
+/**
+ * \name Macros for command definition
+ *
+ * Commands types:
+ * - broadcast commands (bc), no response
+ * - broadcast commands with response (bcr) (Note: No open drain on SD card)
+ * - addressed (point-to-point) commands (ac), no data transfer on DAT lines
+ * - addressed (point-to-point) data transfer commands (adtc), data transfer
+ * on DAT lines
+ *
+ * Specific MMC norms:
+ * CMD1, CMD2 & CMD3 are processed in the open-drain mode.
+ * The CMD line is driven with push-pull drivers.
+ *
+ * Specific SD norms:
+ * There is no open drain mode in SD memory card.
+ *
+ ***************************************
+ * Responses types:
+ *
+ * R1, R3, R4 & R5 use a 48 bits response protected by a 7bit CRC checksum
+ * - R1 receiv data not specified
+ * - R3 receiv OCR
+ * - R4, R5 RCA management (MMC only)
+ * - R6, R7 RCA management (SD only)
+ *
+ * R1b assert the BUSY signal and respond with R1.
+ * If the busy signal is asserted, it is done two clock cycles (Nsr time)
+ * after the end bit of the command. The DAT0 line is driven low.
+ * DAT1-DAT7 lines are driven by the card though their values are not relevant.
+ *
+ * R2 use a 136 bits response protected by a 7bit CRC checksum
+ * The content is CID or CSD
+ *
+ * Specific MMC norms:
+ * - R4 (Fast I/O) return RCA
+ * - R5 (interrupt request) return RCA null
+ *
+ * Specific SD norms:
+ * - R6 (Published RCA) return RCA
+ * - R7 (Card interface condition) return RCA null
+ *
+ * @{
+ */
+
+//! Value to define a SD/MMC/SDIO command
+typedef uint32_t sdmmc_cmd_def_t;
+
+//! \name Flags used to define a SD/MMC/SDIO command
+//! @{
+#define SDMMC_CMD_GET_INDEX(cmd) (cmd & 0x3F)
+//! Have response (MCI only)
+#define SDMMC_RESP_PRESENT      (1lu << 8)
+//! 8 bit response (SPI only)
+#define SDMMC_RESP_8            (1lu << 9)
+//! 32 bit response (SPI only)
+#define SDMMC_RESP_32           (1lu << 10)
+//! 136 bit response (MCI only)
+#define SDMMC_RESP_136          (1lu << 11)
+//! Expect valid crc (MCI only)
+#define SDMMC_RESP_CRC          (1lu << 12)
+//! Card may send busy
+#define SDMMC_RESP_BUSY         (1lu << 13)
+// Open drain for a braodcast command (bc)
+// or to enter in inactive state (MCI only)
+#define SDMMC_CMD_OPENDRAIN     (1lu << 14)
+//! To signal a data write operation
+#define SDMMC_CMD_WRITE         (1lu << 15)
+//! To signal a SDIO tranfer in multi byte mode
+#define SDMMC_CMD_SDIO_BYTE     (1lu << 16)
+//! To signal a SDIO tranfer in block mode
+#define SDMMC_CMD_SDIO_BLOCK    (1lu << 17)
+//! To signal a data transfer in stream mode
+#define SDMMC_CMD_STREAM        (1lu << 18)
+//! To signal a data transfer in single block mode
+#define SDMMC_CMD_SINGLE_BLOCK  (1lu << 19)
+//! To signal a data transfer in multi block mode
+#define SDMMC_CMD_MULTI_BLOCK   (1lu << 20)
+//! @}
+
+//! \name Set of flags to define a reponse type
+//! @{
+#define SDMMC_CMD_NO_RESP (0)
+#define SDMMC_CMD_R1      (SDMMC_RESP_PRESENT | SDMMC_RESP_CRC)
+#define SDMMC_CMD_R1B     (SDMMC_RESP_PRESENT | SDMMC_RESP_CRC | SDMMC_RESP_BUSY)
+#define SDMMC_CMD_R2      (SDMMC_RESP_PRESENT | SDMMC_RESP_8 | SDMMC_RESP_136 | SDMMC_RESP_CRC)
+#define SDMMC_CMD_R3      (SDMMC_RESP_PRESENT | SDMMC_RESP_32)
+#define SDMMC_CMD_R4      (SDMMC_RESP_PRESENT | SDMMC_RESP_32)
+#define SDMMC_CMD_R5      (SDMMC_RESP_PRESENT | SDMMC_RESP_8 | SDMMC_RESP_CRC)
+#define SDMMC_CMD_R6      (SDMMC_RESP_PRESENT | SDMMC_RESP_CRC)
+#define SDMMC_CMD_R7      (SDMMC_RESP_PRESENT | SDMMC_RESP_32 | SDMMC_RESP_CRC)
+//! @}
+
+//! \name SD/MMC/SDIO command definitions
+//! SDMMC_CMDx are include in SD and MMC norms
+//! MMC_CMDx   are include in MMC norms only
+//! SD_CMDx    are include in SD norms only
+//! SDIO_CMDx  are include in SDIO norms only
+//! @{
+
+/*
+ * --- Basic commands and read-stream command (class 0 and class 1) ---
+ */
+
+/** Cmd0(bc): Reset all cards to idle state */
+#define SDMMC_SPI_CMD0_GO_IDLE_STATE     (0 | SDMMC_CMD_R1)
+#define SDMMC_MCI_CMD0_GO_IDLE_STATE     (0 | SDMMC_CMD_NO_RESP | SDMMC_CMD_OPENDRAIN)
+/** MMC Cmd1(bcr, R3): Ask the card to send its Operating Conditions */
+#define MMC_SPI_CMD1_SEND_OP_COND        (1 | SDMMC_CMD_R1)
+#define MMC_MCI_CMD1_SEND_OP_COND        (1 | SDMMC_CMD_R3 | SDMMC_CMD_OPENDRAIN)
+/** Cmd2(bcr, R2): Ask the card to send its CID number (stuff but arg 0 used) */
+#define SDMMC_CMD2_ALL_SEND_CID          (2 | SDMMC_CMD_R2 | SDMMC_CMD_OPENDRAIN)
+/** SD Cmd3(bcr, R6): Ask the card to publish a new relative address (RCA) */
+#define SD_CMD3_SEND_RELATIVE_ADDR       (3 | SDMMC_CMD_R6 | SDMMC_CMD_OPENDRAIN)
+/** MMC Cmd3(ac, R1): Assigns relative address to the card */
+#define MMC_CMD3_SET_RELATIVE_ADDR       (3 | SDMMC_CMD_R1)
+/** Cmd4(bc): Program the DSR of all cards (MCI only) */
+#define SDMMC_CMD4_SET_DSR               (4 | SDMMC_CMD_NO_RESP)
+/** MMC Cmd5(ac, R1b): Toggle the card between Sleep state and Standby state. */
+#define MMC_CMD5_SLEEP_AWAKE             (5 | SDMMC_CMD_R1B)
+/** Cmd7(ac, R1/R1b): Select/Deselect card
+ * For SD: R1b only from the selected card.
+ * For MMC: R1 while selecting from Stand-By State to Transfer State;
+ *          R1b while selecting from Disconnected State to Programming State.
+ */
+#define SDMMC_CMD7_SELECT_CARD_CMD       (7 | SDMMC_CMD_R1B)
+#define SDMMC_CMD7_DESELECT_CARD_CMD     (7 | SDMMC_CMD_R1)
+/** MMC Cmd8(adtc, R1): Send EXT_CSD register as a block of data */
+#define MMC_CMD8_SEND_EXT_CSD            (8 | SDMMC_CMD_R1 | SDMMC_CMD_SINGLE_BLOCK)
+/** SD Cmd8(bcr, R7) : Send SD Memory Card interface condition */
+#define SD_CMD8_SEND_IF_COND             (8 | SDMMC_CMD_R7 | SDMMC_CMD_OPENDRAIN)
+/** Cmd9 SPI (R1): Addressed card sends its card-specific data (CSD) */
+#define SDMMC_SPI_CMD9_SEND_CSD          (9 | SDMMC_CMD_R1 | SDMMC_CMD_SINGLE_BLOCK)
+/** Cmd9 MCI (ac, R2): Addressed card sends its card-specific data (CSD) */
+#define SDMMC_MCI_CMD9_SEND_CSD          (9 | SDMMC_CMD_R2)
+/** Cmd10(ac, R2): Addressed card sends its card identification (CID) */
+#define SDMMC_CMD10_SEND_CID             (10 | SDMMC_CMD_R2)
+/**
+ * MMC Cmd11(adtc, R1): Read data stream from the card, starting at the given
+ * address, until a STOP_TRANSMISSION follows.
+ */
+#define MMC_CMD11_READ_DAT_UNTIL_STOP    (11 | SDMMC_CMD_R1)
+/* SD Cmd11 MCI (ac, R1): Voltage switching */
+#define SD_CMD11_READ_DAT_UNTIL_STOP     (11 | SDMMC_CMD_R1)
+/** Cmd12(ac, R1b): Force the card to stop transmission */
+#define SDMMC_CMD12_STOP_TRANSMISSION    (12 | SDMMC_CMD_R1B)
+/** Cmd13(R2): Addressed card sends its status register. */
+#define SDMMC_SPI_CMD13_SEND_STATUS      (13 | SDMMC_CMD_R2)
+/** Cmd13(ac, R1): Addressed card sends its status register. */
+#define SDMMC_MCI_CMD13_SEND_STATUS      (13 | SDMMC_CMD_R1)
+/** MMC Cmd14(adtc, R1): Read the reversed bus testing data pattern from a card. */
+#define MMC_CMD14_BUSTEST_R              (14 | SDMMC_CMD_R1)
+/** Cmd15(ac): Send an addressed card into the Inactive State. */
+// Note: It is a ac cmd, but it must be send like bc cmd to open drain
+#define SDMMC_CMD15_GO_INACTIVE_STATE    (15 | SDMMC_CMD_NO_RESP | SDMMC_CMD_OPENDRAIN)
+/** MMC Cmd19(adtc, R1): Send the bus test data pattern */
+#define MMC_CMD19_BUSTEST_W              (19 | SDMMC_CMD_R1)
+/** Cmd58(R3): Reads the OCR register of a card */
+#define SDMMC_SPI_CMD58_READ_OCR         (58 | SDMMC_CMD_R3)
+/** Cmd59(R1): Turns the CRC option on or off */
+#define SDMMC_SPI_CMD59_CRC_ON_OFF       (59 | SDMMC_CMD_R1)
+
+/*
+ * --- Block-oriented read commands (class 2) ---
+ */
+/** Cmd16(ac, R1): Set the block length (in bytes) */
+#define SDMMC_CMD16_SET_BLOCKLEN         (16 | SDMMC_CMD_R1)
+/** Cmd17(adtc, R1): Read single block */
+#define SDMMC_CMD17_READ_SINGLE_BLOCK    (17 | SDMMC_CMD_R1 | SDMMC_CMD_SINGLE_BLOCK)
+/** Cmd18(adtc, R1): Read multiple block */
+#define SDMMC_CMD18_READ_MULTIPLE_BLOCK  (18 | SDMMC_CMD_R1 | SDMMC_CMD_MULTI_BLOCK)
+
+/*
+ * --- Sequential write commands (class 3) ---
+ */
+
+/**
+ * MMC Cmd20(adtc, R1): Write a data stream from the host, starting at the
+ * given address, until a STOP_TRANSMISSION follows.
+ */
+#define MMC_CMD20_WRITE_DAT_UNTIL_STOP   (20 | SDMMC_CMD_R1)
+
+/*
+ * --- Block-oriented write commands (class 4) ---
+ */
+/** MMC Cmd23(ac, R1): Set block count */
+#define MMC_CMD23_SET_BLOCK_COUNT        (23 | SDMMC_CMD_R1)
+/** Cmd24(adtc, R1): Write block */
+#define SDMMC_CMD24_WRITE_BLOCK          (24 | SDMMC_CMD_R1 | SDMMC_CMD_WRITE | SDMMC_CMD_SINGLE_BLOCK)
+/** Cmd25(adtc, R1): Write multiple block */
+#define SDMMC_CMD25_WRITE_MULTIPLE_BLOCK (25 | SDMMC_CMD_R1 | SDMMC_CMD_WRITE | SDMMC_CMD_MULTI_BLOCK)
+/** MMC Cmd26(adtc, R1): Programming of the card identification register. */
+#define MMC_CMD26_PROGRAM_CID            (26 | SDMMC_CMD_R1)
+/** Cmd27(adtc, R1): Programming of the programmable bits of the CSD. */
+#define SDMMC_CMD27_PROGRAM_CSD          (27 | SDMMC_CMD_R1)
+
+/*
+ * --- Erase commands  (class 5) ---
+ */
+/** SD Cmd32(ac, R1): */
+#define SD_CMD32_ERASE_WR_BLK_START      (32 | SDMMC_CMD_R1)
+/** SD Cmd33(ac, R1): */
+#define SD_CMD33_ERASE_WR_BLK_END        (33 | SDMMC_CMD_R1)
+/** MMC Cmd35(ac, R1): */
+#define MMC_CMD35_ERASE_GROUP_START      (35 | SDMMC_CMD_R1)
+/** MMC Cmd36(ac, R1): */
+#define MMC_CMD36_ERASE_GROUP_END        (36 | SDMMC_CMD_R1)
+/** Cmd38(ac, R1B): */
+#define SDMMC_CMD38_ERASE                (38 | SDMMC_CMD_R1B)
+
+/*
+ * --- Block Oriented Write Protection Commands (class 6) ---
+ */
+/** Cmd28(ac, R1b): Set write protection */
+#define SDMMC_CMD28_SET_WRITE_PROT       (28 | SDMMC_CMD_R1B)
+/** Cmd29(ac, R1b): Clr write protection */
+#define SDMMC_CMD29_CLR_WRITE_PROT       (29 | SDMMC_CMD_R1B)
+/** Cmd30(adtc, R1b): Send write protection */
+#define SDMMC_CMD30_SEND_WRITE_PROT      (30 | SDMMC_CMD_R1)
+
+/*
+ * --- Lock Card (class 7) ---
+ */
+/** Cmd42(adtc, R1): Used to set/reset the password or lock/unlock the card. */
+#define SDMMC_CMD42_LOCK_UNLOCK          (42 | SDMMC_CMD_R1)
+
+/*
+ * --- Application-specific commands (class 8) ---
+ */
+/**
+ * Cmd55(ac, R1): Indicate to the card that the next command is an application
+ * specific command rather than a standard command.
+ */
+#define SDMMC_CMD55_APP_CMD              (55 | SDMMC_CMD_R1)
+/**
+ * Cmd 56(adtc, R1): Used either to transfer a data block to the card or to get
+ * a data block from the card for general purpose/application specific commands.
+ */
+#define SDMMC_CMD56_GEN_CMD              (56 | SDMMC_CMD_R1)
+
+/**
+ * MMC Cmd6(ac, R1b) : Switche the mode of operation of the selected card
+ * or modifies the EXT_CSD registers.
+ */
+#define MMC_CMD6_SWITCH                  (6 | SDMMC_CMD_R1B)
+/**
+ * SD Cmd6(adtc, R1) : Check switchable function (mode 0)
+ * and switch card function (mode 1).
+ */
+#define SD_CMD6_SWITCH_FUNC              (6 | SDMMC_CMD_R1 | SDMMC_CMD_SINGLE_BLOCK)
+/** ACMD6(ac, R1): Define the data bus width */
+#define SD_ACMD6_SET_BUS_WIDTH           (6 | SDMMC_CMD_R1)
+/** ACMD13(adtc, R1): Send the SD Status. */
+#define SD_ACMD13_SD_STATUS              (13 | SDMMC_CMD_R1)
+/**
+ * ACMD22(adtc, R1): Send the number of the written (with-out errors) write
+ * blocks.
+ */
+#define SD_ACMD22_SEND_NUM_WR_BLOCKS     (22 | SDMMC_CMD_R1)
+/**
+ * ACMD23(ac, R1): Set the number of write blocks to be pre-erased before
+ * writing
+ */
+#define SD_ACMD23_SET_WR_BLK_ERASE_COUNT (23 | SDMMC_CMD_R1)
+/**
+ * ACMD41(bcr, R3): Send host capacity support information (HCS) and asks the
+ * accessed card to send its operating condition register (OCR) content
+ * in the response
+ */
+#define SD_MCI_ACMD41_SD_SEND_OP_COND    (41 | SDMMC_CMD_R3 | SDMMC_CMD_OPENDRAIN)
+/**
+ * ACMD41(R1): Send host capacity support information (HCS) and activates the
+ * card's initilization process
+ */
+#define SD_SPI_ACMD41_SD_SEND_OP_COND    (41 | SDMMC_CMD_R1)
+/**
+ * ACMD42(ac, R1): Connect[1]/Disconnect[0] the 50 KOhm pull-up resistor on
+ * CD/DAT3 (pin 1) of the card.
+ */
+#define SD_ACMD42_SET_CLR_CARD_DETECT    (42 | SDMMC_CMD_R1)
+/** ACMD51(adtc, R1): Read the SD Configuration Register (SCR). */
+#define SD_ACMD51_SEND_SCR               (51 | SDMMC_CMD_R1 | SDMMC_CMD_SINGLE_BLOCK)
+
+/*
+ * --- I/O mode commands (class 9) ---
+ */
+/** MMC Cmd39(ac, R4): Used to write and read 8 bit (register) data fields. */
+#define MMC_CMD39_FAST_IO                (39 | SDMMC_CMD_R4)
+/** MMC Cmd40(bcr, R5): Set the system into interrupt mode */
+#define MMC_CMD40_GO_IRQ_STATE           (40 | SDMMC_CMD_R5 | SDMMC_CMD_OPENDRAIN)
+/** SDIO Cmd5(R4): Send operation condition */
+#define SDIO_CMD5_SEND_OP_COND           (5 | SDMMC_CMD_R4 | SDMMC_CMD_OPENDRAIN)
+/** SDIO CMD52(R5): Direct IO read/write */
+#define SDIO_CMD52_IO_RW_DIRECT          (52 | SDMMC_CMD_R5)
+/** SDIO CMD53(R5): Extended IO read/write */
+#define SDIO_CMD53_IO_R_BYTE_EXTENDED    (53 | SDMMC_CMD_R5 | SDMMC_CMD_SDIO_BYTE)
+#define SDIO_CMD53_IO_W_BYTE_EXTENDED    (53 | SDMMC_CMD_R5 | SDMMC_CMD_SDIO_BYTE | SDMMC_CMD_WRITE)
+#define SDIO_CMD53_IO_R_BLOCK_EXTENDED   (53 | SDMMC_CMD_R5 | SDMMC_CMD_SDIO_BLOCK)
+#define SDIO_CMD53_IO_W_BLOCK_EXTENDED   (53 | SDMMC_CMD_R5 | SDMMC_CMD_SDIO_BLOCK | SDMMC_CMD_WRITE)
+//! @}
+//! @}
+
+
+//! \name Macros for command argument definition
+//! @{
+
+  //! \name MMC CMD6 argument structure
+  //! @{
+//! [31:26] Set to 0
+//! [25:24] Access
+#define MMC_CMD6_ACCESS_COMMAND_SET (0lu << 24)
+#define MMC_CMD6_ACCESS_SET_BITS    (1lu << 24)
+#define MMC_CMD6_ACCESS_CLEAR_BITS  (2lu << 24)
+#define MMC_CMD6_ACCESS_WRITE_BYTE  (3lu << 24)
+//! [23:16] Index for Mode Segment
+#define MMC_CMD6_INDEX_CMD_SET         (EXT_CSD_CMD_SET_INDEX << 16)
+#define MMC_CMD6_INDEX_CMD_SET_REV     (EXT_CSD_CMD_SET_REV_INDEX << 16)
+#define MMC_CMD6_INDEX_POWER_CLASS     (EXT_CSD_POWER_CLASS_INDEX << 16)
+#define MMC_CMD6_INDEX_HS_TIMING       (EXT_CSD_HS_TIMING_INDEX << 16)
+#define MMC_CMD6_INDEX_BUS_WIDTH       (EXT_CSD_BUS_WIDTH_INDEX << 16)
+#define MMC_CMD6_INDEX_ERASED_MEM_CONT (EXT_CSD_ERASED_MEM_CONT_INDEX << 16)
+#define MMC_CMD6_INDEX_BOOT_CONFIG     (EXT_CSD_BOOT_CONFIG_INDEX << 16)
+#define MMC_CMD6_INDEX_BOOT_BUS_WIDTH  (EXT_CSD_BOOT_BUS_WIDTH_INDEX << 16)
+#define MMC_CMD6_INDEX_ERASE_GROUP_DEF (EXT_CSD_ERASE_GROUP_DEF_INDEX << 16)
+//! [15:8] Value
+#define MMC_CMD6_VALUE_BUS_WIDTH_1BIT    (0x0lu << 8)
+#define MMC_CMD6_VALUE_BUS_WIDTH_4BIT    (0x1lu << 8)
+#define MMC_CMD6_VALUE_BUS_WIDTH_8BIT    (0x2lu << 8)
+#define MMC_CMD6_VALUE_HS_TIMING_ENABLE  (0x1lu << 8)
+#define MMC_CMD6_VALUE_HS_TIMING_DISABLE (0x0lu << 8)
+//! [7:3] Set to 0
+//! [2:0] Cmd Set
+  //! @}
+
+  //! \name SD CMD6 argument structure
+  //! @{
+//! CMD6 arg[ 3: 0] function group 1, access mode
+#define SD_CMD6_GRP1_HIGH_SPEED     (0x1lu << 0)
+#define SD_CMD6_GRP1_DEFAULT        (0x0lu << 0)
+//! CMD6 arg[ 7: 4] function group 2, command system
+#define SD_CMD6_GRP2_NO_INFLUENCE   (0xFlu << 4)
+#define SD_CMD6_GRP2_DEFAULT        (0x0lu << 4)
+//! CMD6 arg[11: 8] function group 3, 0xF or 0x0
+#define SD_CMD6_GRP3_NO_INFLUENCE   (0xFlu << 8)
+#define SD_CMD6_GRP3_DEFAULT        (0x0lu << 8)
+//! CMD6 arg[15:12] function group 4, 0xF or 0x0
+#define SD_CMD6_GRP4_NO_INFLUENCE   (0xFlu << 12)
+#define SD_CMD6_GRP4_DEFAULT        (0x0lu << 12)
+//! CMD6 arg[19:16] function group 5, 0xF or 0x0
+#define SD_CMD6_GRP5_NO_INFLUENCE   (0xFlu << 16)
+#define SD_CMD6_GRP5_DEFAULT        (0x0lu << 16)
+//! CMD6 arg[23:20] function group 6, 0xF or 0x0
+#define SD_CMD6_GRP6_NO_INFLUENCE   (0xFlu << 20)
+#define SD_CMD6_GRP6_DEFAULT        (0x0lu << 20)
+//! CMD6 arg[30:24] reserved 0
+//! CMD6 arg[31   ] Mode, 0: Check, 1: Switch
+#define SD_CMD6_MODE_CHECK          (0lu << 31)
+#define SD_CMD6_MODE_SWITCH         (1lu << 31)
+  //! @}
+
+  //! \name SD CMD8 argument structure
+  //! @{
+#define SD_CMD8_PATTERN       0xAA
+#define SD_CMD8_MASK_PATTERN  0xFF
+#define SD_CMD8_HIGH_VOLTAGE  0x100
+#define SD_CMD8_MASK_VOLTAGE  0xF00
+  //! @}
+
+  //! \name SD ACMD41 arguments
+  //! @{
+#define SD_ACMD41_HCS   (1lu << 30) //!< (SD) Host Capacity Support
+  //! @}
+//! @}
+
+
+//! \name SDIO definitions
+//! @{
+
+  //! \name SDIO state (in R5)
+  //! @{
+#define SDIO_R5_COM_CRC_ERROR   (1lu << 15) /**< CRC check error */
+#define SDIO_R5_ILLEGAL_COMMAND (1lu << 14) /**< Illegal command */
+#define SDIO_R5_STATE           (3lu << 12) /**< SDIO R5 state mask */
+#define SDIO_R5_STATE_DIS       (0lu << 12) /**< Disabled */
+#define SDIO_R5_STATE_CMD       (1lu << 12) /**< DAT lines free */
+#define SDIO_R5_STATE_TRN       (2lu << 12) /**< Transfer */
+#define SDIO_R5_STATE_RFU       (3lu << 12) /**< Reserved */
+#define SDIO_R5_ERROR           (1lu << 11) /**< General error */
+#define SDIO_R5_FUNC_NUM        (1lu << 9)  /**< Invalid function number */
+#define SDIO_R5_OUT_OF_RANGE    (1lu << 8)  /**< Argument out of range */
+#define SDIO_R5_STATUS_ERR      (SDIO_R5_ERROR | SDIO_R5_FUNC_NUM \
+		| SDIO_R5_OUT_OF_RANGE) //!< Errro status bits mask
+  //! @}
+
+  //! \name SDIO state (in R6)
+  //! @{
+/** The CRC check of the previous command failed. */
+#define SDIO_R6_COM_CRC_ERROR   (1lu << 15)
+/** Command not legal for the card state. */
+#define SDIO_R6_ILLEGAL_COMMAND (1lu << 14)
+/** A general or an unknown error occurred during the operation. */
+#define SDIO_R6_ERROR           (1lu << 13)
+/** Status bits mask for SDIO R6 */
+#define SDIO_STATUS_R6  (SDIO_R6_COM_CRC_ERROR \
+		| SDIO_R6_ILLEGAL_COMMAND | SDIO_R6_ERROR)
+  //! @}
+
+  //! \name SDIO CMD52 argument bit offset
+  //! @{
+//! CMD52 arg[ 7: 0] Write data or stuff bits
+#define SDIO_CMD52_WR_DATA      0
+//! CMD52 arg[    8] Reserved
+#define SDIO_CMD52_STUFF0       8
+//! CMD52 arg[25: 9] Register address
+#define SDIO_CMD52_REG_ADRR     9
+//! CMD52 arg[   26] Reserved
+#define SDIO_CMD52_STUFF1       26
+//! CMD52 arg[   27] Read after Write flag
+#define SDIO_CMD52_RAW_FLAG     27
+//! CMD52 arg[30:28] Number of the function
+#define SDIO_CMD52_FUNCTION_NUM 28
+//! CMD52 arg[   31] Direction, 1:write, 0:read.
+#define SDIO_CMD52_RW_FLAG      31
+#  define SDIO_CMD52_READ_FLAG    0
+#  define SDIO_CMD52_WRITE_FLAG   1
+  //! @}
+
+  //! \name SDIO CMD53 argument structure
+  //! @{
+/**
+ * [ 8: 0] Byte mode: number of bytes to transfer,
+ *                    0 cause 512 bytes transfer.
+ *         Block mode: number of blocks to transfer,
+ *                    0 set count to infinite.
+ */
+#define SDIO_CMD53_COUNT        0
+//! CMD53 arg[25: 9] Start Address I/O register
+#define SDIO_CMD53_REG_ADDR     9
+//! CMD53 arg[   26] 1:Incrementing address, 0: fixed
+#define SDIO_CMD53_OP_CODE      26
+//! CMD53 arg[   27] (Optional) 1:block mode
+#define SDIO_CMD53_BLOCK_MODE   27
+//! CMD53 arg[30:28] Number of the function
+#define SDIO_CMD53_FUNCTION_NUM 28
+//! CMD53 arg[   31] Direction, 1:WR, 0:RD
+#define SDIO_CMD53_RW_FLAG      31
+#  define SDIO_CMD53_READ_FLAG    0
+#  define SDIO_CMD53_WRITE_FLAG   1
+  //! @}
+
+  //! \name SDIO Functions
+  //! @{
+#define SDIO_CIA  0 /**< SDIO Function 0 (CIA) */
+#define SDIO_FN0  0 /**< SDIO Function 0 */
+#define SDIO_FN1  1 /**< SDIO Function 1 */
+#define SDIO_FN2  2 /**< SDIO Function 2 */
+#define SDIO_FN3  3 /**< SDIO Function 3 */
+#define SDIO_FN4  4 /**< SDIO Function 4 */
+#define SDIO_FN5  5 /**< SDIO Function 5 */
+#define SDIO_FN6  6 /**< SDIO Function 6 */
+#define SDIO_FN7  7 /**< SDIO Function 7 */
+  //! @}
+
+  //! \name SDIO Card Common Control Registers (CCCR)
+  //! @{
+#define SDIO_CCCR_SDIO_REV    0x00         /**< CCCR/SDIO revision (RO) */
+#define   SDIO_CCCR_REV_1_00    (0x0lu << 0)  /**< CCCR/FBR Version 1.00 */
+#define   SDIO_CCCR_REV_1_10    (0x1lu << 0)  /**< CCCR/FBR Version 1.10 */
+#define   SDIO_CCCR_REV_2_00    (0x2lu << 0)  /**< CCCR/FBR Version 2.00 */
+#define   SDIO_CCCR_REV_3_00    (0x3lu << 0)  /**< CCCR/FBR Version 3.00 */
+#define   SDIO_SDIO_REV_1_00    (0x0lu << 4)  /**< SDIO Spec 1.00 */
+#define   SDIO_SDIO_REV_1_10    (0x1lu << 4)  /**< SDIO Spec 1.10 */
+#define   SDIO_SDIO_REV_1_20    (0x2lu << 4)  /**< SDIO Spec 1.20(unreleased) */
+#define   SDIO_SDIO_REV_2_00    (0x3lu << 4)  /**< SDIO Spec Version 2.00 */
+#define   SDIO_SDIO_REV_3_00    (0x4lu << 4)  /**< SDIO Spec Version 3.00 */
+#define SDIO_CCCR_SD_REV      0x01         /**< SD Spec Revision (RO) */
+#define   SDIO_SD_REV_1_01      (0x0lu << 0)  /**< SD 1.01 (Mar 2000) */
+#define   SDIO_SD_REV_1_10      (0x1lu << 0)  /**< SD 1.10 (Oct 2004) */
+#define   SDIO_SD_REV_2_00      (0x2lu << 0)  /**< SD 2.00 (May 2006) */
+#define   SDIO_SD_REV_3_00      (0x3lu << 0)  /**< SD 3.00 */
+#define SDIO_CCCR_IOE         0x02         /**< I/O Enable (R/W) */
+#define   SDIO_IOE_FN1          (0x1lu << 1)  /**< Function 1 Enable/Disable */
+#define   SDIO_IOE_FN2          (0x1lu << 2)  /**< Function 2 Enable/Disable */
+#define   SDIO_IOE_FN3          (0x1lu << 3)  /**< Function 3 Enable/Disable */
+#define   SDIO_IOE_FN4          (0x1lu << 4)  /**< Function 4 Enable/Disable */
+#define   SDIO_IOE_FN5          (0x1lu << 5)  /**< Function 5 Enable/Disable */
+#define   SDIO_IOE_FN6          (0x1lu << 6)  /**< Function 6 Enable/Disable */
+#define   SDIO_IOE_FN7          (0x1lu << 7)  /**< Function 7 Enable/Disable */
+#define SDIO_CCCR_IOR         0x03         /**< I/O Ready (RO) */
+#define   SDIO_IOR_FN1          (0x1lu << 1)  /**< Function 1 ready */
+#define   SDIO_IOR_FN2          (0x1lu << 2)  /**< Function 2 ready */
+#define   SDIO_IOR_FN3          (0x1lu << 3)  /**< Function 3 ready */
+#define   SDIO_IOR_FN4          (0x1lu << 4)  /**< Function 4 ready */
+#define   SDIO_IOR_FN5          (0x1lu << 5)  /**< Function 5 ready */
+#define   SDIO_IOR_FN6          (0x1lu << 6)  /**< Function 6 ready */
+#define   SDIO_IOR_FN7          (0x1lu << 7)  /**< Function 7 ready */
+#define SDIO_CCCR_IEN         0x04         /**< Int Enable */
+#define   SDIO_IENM             (0x1lu << 0)  /**< Int Enable Master (R/W) */
+#define   SDIO_IEN_FN1          (0x1lu << 1)  /**< Function 1 Int Enable */
+#define   SDIO_IEN_FN2          (0x1lu << 2)  /**< Function 2 Int Enable */
+#define   SDIO_IEN_FN3          (0x1lu << 3)  /**< Function 3 Int Enable */
+#define   SDIO_IEN_FN4          (0x1lu << 4)  /**< Function 4 Int Enable */
+#define   SDIO_IEN_FN5          (0x1lu << 5)  /**< Function 5 Int Enable */
+#define   SDIO_IEN_FN6          (0x1lu << 6)  /**< Function 6 Int Enable */
+#define   SDIO_IEN_FN7          (0x1lu << 7)  /**< Function 7 Int Enable */
+#define SDIO_CCCR_INT         0x05         /**< Int Pending */
+#define   SDIO_INT_FN1          (0x1lu << 1)  /**< Function 1 Int pending */
+#define   SDIO_INT_FN2          (0x1lu << 2)  /**< Function 2 Int pending */
+#define   SDIO_INT_FN3          (0x1lu << 3)  /**< Function 3 Int pending */
+#define   SDIO_INT_FN4          (0x1lu << 4)  /**< Function 4 Int pending */
+#define   SDIO_INT_FN5          (0x1lu << 5)  /**< Function 5 Int pending */
+#define   SDIO_INT_FN6          (0x1lu << 6)  /**< Function 6 Int pending */
+#define   SDIO_INT_FN7          (0x1lu << 7)  /**< Function 7 Int pending */
+#define SDIO_CCCR_IOA         0x06         /**< I/O Abort */
+#define   SDIO_AS_FN1           (0x1lu << 0)  /**< Abort function 1 IO */
+#define   SDIO_AS_FN2           (0x2lu << 0)  /**< Abort function 2 IO */
+#define   SDIO_AS_FN3           (0x3lu << 0)  /**< Abort function 3 IO */
+#define   SDIO_AS_FN4           (0x4lu << 0)  /**< Abort function 4 IO */
+#define   SDIO_AS_FN5           (0x5lu << 0)  /**< Abort function 5 IO */
+#define   SDIO_AS_FN6           (0x6lu << 0)  /**< Abort function 6 IO */
+#define   SDIO_AS_FN7           (0x7lu << 0)  /**< Abort function 7 IO */
+#define   SDIO_RES              (0x1lu << 3)  /**< IO CARD RESET (WO) */
+#define SDIO_CCCR_BUS_CTRL    0x07         /**< Bus Interface Control */
+#define   SDIO_BUSWIDTH_1B      (0x0lu << 0)  /**< 1-bit data bus */
+#define   SDIO_BUSWIDTH_4B      (0x2lu << 0)  /**< 4-bit data bus */
+/** Enable Continuous SPI interrupt (R/W) */
+#define   SDIO_BUS_ECSI         (0x1lu << 5)
+/** Support Continuous SPI interrupt (RO) */
+#define   SDIO_BUS_SCSI         (0x1lu << 6)
+/** Connect(0)/Disconnect(1) pull-up on CD/DAT[3] (R/W) */
+#define   SDIO_BUS_CD_DISABLE   (0x1lu << 7)
+#define SDIO_CCCR_CAP         0x08         /**< Card Capability */
+/** Support Direct Commands during data transfer (RO) */
+#define   SDIO_CAP_SDC          (0x1lu << 0)
+/** Support Multi-Block (RO) */
+#define   SDIO_CAP_SMB          (0x1lu << 1)
+/** Support Read Wait (RO) */
+#define   SDIO_CAP_SRW          (0x1lu << 2)
+/** Support Suspend/Resume (RO) */
+#define   SDIO_CAP_SBS          (0x1lu << 3)
+/** Support interrupt between blocks of data in 4-bit SD mode (RO) */
+#define   SDIO_CAP_S4MI         (0x1lu << 4)
+/** Enable interrupt between blocks of data in 4-bit SD mode (R/W) */
+#define   SDIO_CAP_E4MI         (0x1lu << 5)
+/** Low-Speed Card (RO) */
+#define   SDIO_CAP_LSC          (0x1lu << 6)
+/** 4-bit support for Low-Speed Card (RO) */
+#define   SDIO_CAP_4BLS         (0x1lu << 7)
+/** Pointer to CIS (3B, LSB first) */
+#define SDIO_CCCR_CIS_PTR     0x09
+/** Bus Suspend */
+#define SDIO_CCCR_BUS_SUSPEND 0x0C
+/** Bus Status (transfer on DAT[x] lines) (RO) */
+#define   SDIO_BS               (0x1lu << 0)
+/** Bus Release Request/Status (R/W) */
+#define   SDIO_BR               (0x1lu << 1)
+#define SDIO_CCCR_FUN_SEL     0x0D         /**< Function select */
+#define   SDIO_DF               (0x1lu << 7)  /**< Resume Data Flag (RO) */
+#define   SDIO_FS_CIA           (0x0lu << 0)  /**< Select CIA (function 0) */
+#define   SDIO_FS_FN1           (0x1lu << 0)  /**< Select Function 1 */
+#define   SDIO_FS_FN2           (0x2lu << 0)  /**< Select Function 2 */
+#define   SDIO_FS_FN3           (0x3lu << 0)  /**< Select Function 3 */
+#define   SDIO_FS_FN4           (0x4lu << 0)  /**< Select Function 4 */
+#define   SDIO_FS_FN5           (0x5lu << 0)  /**< Select Function 5 */
+#define   SDIO_FS_FN6           (0x6lu << 0)  /**< Select Function 6 */
+#define   SDIO_FS_FN7           (0x7lu << 0)  /**< Select Function 7 */
+#define   SDIO_FS_MEM           (0x8lu << 0)  /**< Select memory in combo card */
+#define SDIO_CCCR_EXEC        0x0E         /**< Exec Flags (RO) */
+#define   SDIO_EXM              (0x1lu << 0)  /**< Executing status of memory */
+#define   SDIO_EX_FN1           (0x1lu << 1)  /**< Executing status of func 1 */
+#define   SDIO_EX_FN2           (0x1lu << 2)  /**< Executing status of func 2 */
+#define   SDIO_EX_FN3           (0x1lu << 3)  /**< Executing status of func 3 */
+#define   SDIO_EX_FN4           (0x1lu << 4)  /**< Executing status of func 4 */
+#define   SDIO_EX_FN5           (0x1lu << 5)  /**< Executing status of func 5 */
+#define   SDIO_EX_FN6           (0x1lu << 6)  /**< Executing status of func 6 */
+#define   SDIO_EX_FN7           (0x1lu << 7)  /**< Executing status of func 7 */
+#define SDIO_CCCR_READY       0x0F         /**< Ready Flags (RO) */
+#define   SDIO_RFM              (0x1lu << 0)  /**< Ready Flag for memory */
+#define   SDIO_RF_FN1           (0x1lu << 1)  /**< Ready Flag for function 1 */
+#define   SDIO_RF_FN2           (0x1lu << 2)  /**< Ready Flag for function 2 */
+#define   SDIO_RF_FN3           (0x1lu << 3)  /**< Ready Flag for function 3 */
+#define   SDIO_RF_FN4           (0x1lu << 4)  /**< Ready Flag for function 4 */
+#define   SDIO_RF_FN5           (0x1lu << 5)  /**< Ready Flag for function 5 */
+#define   SDIO_RF_FN6           (0x1lu << 6)  /**< Ready Flag for function 6 */
+#define   SDIO_RF_FN7           (0x1lu << 7)  /**< Ready Flag for function 7 */
+#define SDIO_CCCR_FN0_BLKSIZ  0x10  /**< FN0 Block Size (2B, LSB first) (R/W) */
+#define SDIO_CCCR_POWER       0x12         /**< Power Control */
+#define   SDIO_POWER_SMPC       (0x1lu << 0)  /**< Support Master Power Control*/
+#define   SDIO_POWER_EMPC       (0x1lu << 1)  /**< Enable Master Power Control */
+#define SDIO_CCCR_HS          0x13         /**< High-Speed */
+#define   SDIO_SHS              (0x1lu << 0)  /**< Support High-Speed (RO) */
+#define   SDIO_EHS              (0x1lu << 1)  /**< Enable High-Speed (R/W) */
+  //! @}
+
+  //! \name SDIO Card Metaformat
+  //! @{
+/** Null tuple (PCMCIA 3.1.9) */
+#define SDIO_CISTPL_NULL     0x00
+/** Device tuple (PCMCIA 3.2.2) */
+#define SDIO_CISTPL_DEVICE   0x01
+/** Checksum control (PCMCIA 3.1.1) */
+#define SDIO_CISTPL_CHECKSUM 0x10
+/** Level 1 version (PCMCIA 3.2.10) */
+#define SDIO_CISTPL_VERS_1   0x15
+/** Alternate Language String (PCMCIA 3.2.1) */
+#define SDIO_CISTPL_ALTSTR   0x16
+/** Manufacturer Identification String (PCMCIA 3.2.9) */
+#define SDIO_CISTPL_MANFID   0x20
+/** Function Identification (PCMCIA 3.2.7) */
+#define SDIO_CISTPL_FUNCID   0x21
+/** Function Extensions (PCMCIA 3.2.6) */
+#define SDIO_CISTPL_FUNCE    0x22
+/** Additional information for SDIO (PCMCIA 6.1.2) */
+#define SDIO_CISTPL_SDIO_STD 0x91
+/** Reserved for future SDIO (PCMCIA 6.1.3) */
+#define SDIO_CISTPL_SDIO_EXT 0x92
+/** The End-of-chain Tuple (PCMCIA 3.1.2) */
+#define SDIO_CISTPL_END      0xFF
+  //! @}
+
+//! @}
+
+//! \name CSD, OCR, SCR, Switch status, extend CSD definitions
+//! @{
+
+/**
+ * \brief Macro function to extract a bits field from a large SD MMC register
+ * Used by : CSD, SCR, Switch status
+ */
+static inline uint32_t SDMMC_UNSTUFF_BITS(uint8_t *reg, uint16_t reg_size,
+		uint16_t pos, uint8_t size)
+{
+	uint32_t value;
+	value = reg[((reg_size - pos + 7) / 8) - 1] >> (pos % 8);
+	if (((pos % 8) + size) > 8) {
+		value |= (uint32_t)reg[((reg_size - pos + 7) / 8) - 2] << (8 - (pos % 8));
+	}
+	if (((pos % 8) + size) > 16) {
+		value |= (uint32_t)reg[((reg_size - pos + 7) / 8) - 3] << (16 - (pos % 8));
+	}
+	if (((pos % 8) + size) > 16) {
+		value |= (uint32_t)reg[((reg_size - pos + 7) / 8) - 3] << (16 - (pos % 8));
+	}
+	value &=  ((uint32_t)1 << size) - 1;
+	return value;
+}
+
+  //! \name CSD Fields
+  //! @{
+#define CSD_REG_BIT_SIZE            128 //!< 128 bits
+#define CSD_REG_BSIZE               (CSD_REG_BIT_SIZE / 8) //!< 16 bytes
+#define CSD_STRUCTURE(csd, pos, size) \
+		SDMMC_UNSTUFF_BITS(csd, CSD_REG_BIT_SIZE, pos, size)
+#define CSD_STRUCTURE_VERSION(csd)  CSD_STRUCTURE(csd, 126, 2)
+#define   SD_CSD_VER_1_0            0
+#define   SD_CSD_VER_2_0            1
+#define   MMC_CSD_VER_1_0           0
+#define   MMC_CSD_VER_1_1           1
+#define   MMC_CSD_VER_1_2           2
+#define CSD_TRAN_SPEED(csd)         CSD_STRUCTURE(csd, 96, 8)
+#define SD_CSD_1_0_C_SIZE(csd)      CSD_STRUCTURE(csd, 62, 12)
+#define SD_CSD_1_0_C_SIZE_MULT(csd) CSD_STRUCTURE(csd, 47, 3)
+#define SD_CSD_1_0_READ_BL_LEN(csd) CSD_STRUCTURE(csd, 80, 4)
+#define SD_CSD_2_0_C_SIZE(csd)      CSD_STRUCTURE(csd, 48, 22)
+#define MMC_CSD_C_SIZE(csd)         CSD_STRUCTURE(csd, 62, 12)
+#define MMC_CSD_C_SIZE_MULT(csd)    CSD_STRUCTURE(csd, 47, 3)
+#define MMC_CSD_READ_BL_LEN(csd)    CSD_STRUCTURE(csd, 80, 4)
+#define MMC_CSD_SPEC_VERS(csd)      CSD_STRUCTURE(csd, 122, 4)
+  //! @}
+
+  //! \name OCR Register Fields
+  //! @{
+#define OCR_REG_BSIZE          (32 / 8)    /**< 32 bits, 4 bytes */
+#define OCR_VDD_170_195        (1lu << 7)
+#define OCR_VDD_20_21          (1lu << 8)
+#define OCR_VDD_21_22          (1lu << 9)
+#define OCR_VDD_22_23          (1lu << 10)
+#define OCR_VDD_23_24          (1lu << 11)
+#define OCR_VDD_24_25          (1lu << 12)
+#define OCR_VDD_25_26          (1lu << 13)
+#define OCR_VDD_26_27          (1lu << 14)
+#define OCR_VDD_27_28          (1lu << 15)
+#define OCR_VDD_28_29          (1lu << 16)
+#define OCR_VDD_29_30          (1lu << 17)
+#define OCR_VDD_30_31          (1lu << 18)
+#define OCR_VDD_31_32          (1lu << 19)
+#define OCR_VDD_32_33          (1lu << 20)
+#define OCR_VDD_33_34          (1lu << 21)
+#define OCR_VDD_34_35          (1lu << 22)
+#define OCR_VDD_35_36          (1lu << 23)
+#define OCR_SDIO_S18R          (1lu << 24) /**< Switching to 1.8V Accepted */
+#define OCR_SDIO_MP            (1lu << 27) /**< Memory Present */
+#define OCR_SDIO_NF            (7lu << 28) /**< Number of I/O Functions */
+#define OCR_ACCESS_MODE_MASK   (3lu << 29) /**< (MMC) Access mode mask */
+#define OCR_ACCESS_MODE_BYTE   (0lu << 29) /**< (MMC) Byte access mode */
+#define OCR_ACCESS_MODE_SECTOR (2lu << 29) /**< (MMC) Sector access mode */
+#define OCR_CCS                (1lu << 30) /**< (SD) Card Capacity Status */
+#define OCR_POWER_UP_BUSY      (1lu << 31) /**< Card power up status bit */
+  //! @}
+
+  //! \name SD SCR Register Fields
+  //! @{
+#define SD_SCR_REG_BIT_SIZE    64 //!< 64 bits
+#define SD_SCR_REG_BSIZE       (SD_SCR_REG_BIT_SIZE / 8) //!< 8 bytes
+#define SD_SCR_STRUCTURE(scr, pos, size) \
+		SDMMC_UNSTUFF_BITS(scr, SD_SCR_REG_BIT_SIZE, pos, size)
+#define SD_SCR_SCR_STRUCTURE(scr)            SD_SCR_STRUCTURE(scr, 60, 4)
+#define   SD_SCR_SCR_STRUCTURE_1_0             0
+#define SD_SCR_SD_SPEC(scr)                  SD_SCR_STRUCTURE(scr, 56, 4)
+#define   SD_SCR_SD_SPEC_1_0_01                0
+#define   SD_SCR_SD_SPEC_1_10                  1
+#define   SD_SCR_SD_SPEC_2_00                  2
+#define SD_SCR_DATA_STATUS_AFTER_ERASE(scr)  SD_SCR_STRUCTURE(scr, 55, 1)
+#define SD_SCR_SD_SECURITY(scr)              SD_SCR_STRUCTURE(scr, 52, 3)
+#define   SD_SCR_SD_SECURITY_NO                0
+#define   SD_SCR_SD_SECURITY_NOTUSED           1
+#define   SD_SCR_SD_SECURITY_1_01              2
+#define   SD_SCR_SD_SECURITY_2_00              3
+#define   SD_SCR_SD_SECURITY_3_00              4
+#define SD_SCR_SD_BUS_WIDTHS(scr)            SD_SCR_STRUCTURE(scr, 48, 4)
+#define   SD_SCR_SD_BUS_WIDTH_1BITS            (1lu << 0)
+#define   SD_SCR_SD_BUS_WIDTH_4BITS            (1lu << 2)
+#define SD_SCR_SD_SPEC3(scr)                 SD_SCR_STRUCTURE(scr, 47, 1)
+#define   SD_SCR_SD_SPEC_3_00                  1
+#define SD_SCR_SD_EX_SECURITY(scr)           SD_SCR_STRUCTURE(scr, 43, 4)
+#define SD_SCR_SD_CMD_SUPPORT(scr)           SD_SCR_STRUCTURE(scr, 32, 2)
+  //! @}
+
+  //! \name SD Switch Status Fields
+  //! @{
+#define SD_SW_STATUS_BIT_SIZE   512 //!< 512 bits
+#define SD_SW_STATUS_BSIZE      (SD_SW_STATUS_BIT_SIZE / 8) //!< 64 bytes
+#define SD_SW_STATUS_STRUCTURE(sd_sw_status, pos, size) \
+		SDMMC_UNSTUFF_BITS(sd_sw_status, SD_SW_STATUS_BIT_SIZE, pos, size)
+#define SD_SW_STATUS_MAX_CURRENT_CONSUMPTION(status) \
+		SD_SW_STATUS_STRUCTURE(status, 496, 16)
+#define SD_SW_STATUS_FUN_GRP6_INFO(status) \
+		SD_SW_STATUS_STRUCTURE(status, 480, 16)
+#define SD_SW_STATUS_FUN_GRP5_INFO(status) \
+		SD_SW_STATUS_STRUCTURE(status, 464, 16)
+#define SD_SW_STATUS_FUN_GRP4_INFO(status) \
+		SD_SW_STATUS_STRUCTURE(status, 448, 16)
+#define SD_SW_STATUS_FUN_GRP3_INFO(status) \
+		SD_SW_STATUS_STRUCTURE(status, 432, 16)
+#define SD_SW_STATUS_FUN_GRP2_INFO(status) \
+		SD_SW_STATUS_STRUCTURE(status, 416, 16)
+#define SD_SW_STATUS_FUN_GRP1_INFO(status) \
+		SD_SW_STATUS_STRUCTURE(status, 400, 16)
+#define SD_SW_STATUS_FUN_GRP6_RC(status) \
+		SD_SW_STATUS_STRUCTURE(status, 396, 4)
+#define SD_SW_STATUS_FUN_GRP5_RC(status) \
+		SD_SW_STATUS_STRUCTURE(status, 392, 4)
+#define SD_SW_STATUS_FUN_GRP4_RC(status) \
+		SD_SW_STATUS_STRUCTURE(status, 388, 4)
+#define SD_SW_STATUS_FUN_GRP3_RC(status) \
+		SD_SW_STATUS_STRUCTURE(status, 384, 4)
+#define SD_SW_STATUS_FUN_GRP2_RC(status) \
+		SD_SW_STATUS_STRUCTURE(status, 380, 4)
+#define SD_SW_STATUS_FUN_GRP1_RC(status) \
+		SD_SW_STATUS_STRUCTURE(status, 376, 4)
+#define SD_SW_STATUS_FUN_GRP_RC_ERROR   0xFU
+#define SD_SW_STATUS_DATA_STRUCT_VER(status) \
+		SD_SW_STATUS_STRUCTURE(status, 368, 8)
+#define SD_SW_STATUS_FUN_GRP6_BUSY(status) \
+		SD_SW_STATUS_STRUCTURE(status, 352, 16)
+#define SD_SW_STATUS_FUN_GRP5_BUSY(status) \
+		SD_SW_STATUS_STRUCTURE(status, 336, 16)
+#define SD_SW_STATUS_FUN_GRP4_BUSY(status) \
+		SD_SW_STATUS_STRUCTURE(status, 320, 16)
+#define SD_SW_STATUS_FUN_GRP3_BUSY(status) \
+		SD_SW_STATUS_STRUCTURE(status, 304, 16)
+#define SD_SW_STATUS_FUN_GRP2_BUSY(status) \
+		SD_SW_STATUS_STRUCTURE(status, 288, 16)
+#define SD_SW_STATUS_FUN_GRP1_BUSY(status) \
+		SD_SW_STATUS_STRUCTURE(status, 272, 16)
+  //! @}
+
+  //! \name Card Status Fields
+  //! @{
+#define CARD_STATUS_APP_CMD           (1lu << 5)
+#define CARD_STATUS_SWITCH_ERROR      (1lu << 7)
+#define CARD_STATUS_READY_FOR_DATA    (1lu << 8)
+#define CARD_STATUS_STATE_IDLE        (0lu << 9)
+#define CARD_STATUS_STATE_READY       (1lu << 9)
+#define CARD_STATUS_STATE_IDENT       (2lu << 9)
+#define CARD_STATUS_STATE_STBY        (3lu << 9)
+#define CARD_STATUS_STATE_TRAN        (4lu << 9)
+#define CARD_STATUS_STATE_DATA        (5lu << 9)
+#define CARD_STATUS_STATE_RCV         (6lu << 9)
+#define CARD_STATUS_STATE_PRG         (7lu << 9)
+#define CARD_STATUS_STATE_DIS         (8lu << 9)
+#define CARD_STATUS_STATE             (0xFlu << 9)
+#define CARD_STATUS_ERASE_RESET       (1lu << 13)
+#define CARD_STATUS_WP_ERASE_SKIP     (1lu << 15)
+#define CARD_STATUS_CIDCSD_OVERWRITE  (1lu << 16)
+#define CARD_STATUS_OVERRUN           (1lu << 17)
+#define CARD_STATUS_UNERRUN           (1lu << 18)
+#define CARD_STATUS_ERROR             (1lu << 19)
+#define CARD_STATUS_CC_ERROR          (1lu << 20)
+#define CARD_STATUS_CARD_ECC_FAILED   (1lu << 21)
+#define CARD_STATUS_ILLEGAL_COMMAND   (1lu << 22)
+#define CARD_STATUS_COM_CRC_ERROR     (1lu << 23)
+#define CARD_STATUS_UNLOCK_FAILED     (1lu << 24)
+#define CARD_STATUS_CARD_IS_LOCKED    (1lu << 25)
+#define CARD_STATUS_WP_VIOLATION      (1lu << 26)
+#define CARD_STATUS_ERASE_PARAM       (1lu << 27)
+#define CARD_STATUS_ERASE_SEQ_ERROR   (1lu << 28)
+#define CARD_STATUS_BLOCK_LEN_ERROR   (1lu << 29)
+#define CARD_STATUS_ADDRESS_MISALIGN  (1lu << 30)
+#define CARD_STATUS_ADDR_OUT_OF_RANGE (1lu << 31)
+
+#define CARD_STATUS_ERR_RD_WR    (CARD_STATUS_ADDR_OUT_OF_RANGE \
+		| CARD_STATUS_ADDRESS_MISALIGN \
+		| CARD_STATUS_BLOCK_LEN_ERROR \
+		| CARD_STATUS_WP_VIOLATION \
+		| CARD_STATUS_ILLEGAL_COMMAND \
+		| CARD_STATUS_CC_ERROR \
+		| CARD_STATUS_ERROR)
+  //! @}
+
+  //! \name SD Status Field
+  //! @{
+#define SD_STATUS_BSIZE    (512 / 8)  /**< 512 bits, 64bytes */
+  //! @}
+
+  //! \name MMC Extended CSD Register Field
+  //! @{
+#define EXT_CSD_BSIZE    512  /**< 512 bytes. */
+/* Below belongs to Properties Segment */
+#define EXT_CSD_S_CMD_SET_INDEX              504lu
+#define EXT_CSD_BOOT_INFO_INDEX              228lu
+#define EXT_CSD_BOOT_SIZE_MULTI_INDEX        226lu
+#define EXT_CSD_ACC_SIZE_INDEX               225lu
+#define EXT_CSD_HC_ERASE_GRP_SIZE_INDEX      224lu
+#define EXT_CSD_ERASE_TIMEOUT_MULT_INDEX     223lu
+#define EXT_CSD_REL_WR_SEC_C_INDEX           222lu
+#define EXT_CSD_HC_WP_GRP_SIZE_INDEX         221lu
+#define EXT_CSD_S_C_VCC_INDEX                220lu
+#define EXT_CSD_S_C_VCCQ_INDEX               219lu
+#define EXT_CSD_S_A_TIMEOUT_INDEX            217lu
+#define EXT_CSD_SEC_COUNT_INDEX              212lu
+#define EXT_CSD_MIN_PERF_W_8_52_INDEX        210lu
+#define EXT_CSD_MIN_PERF_R_8_52_INDEX        209lu
+#define EXT_CSD_MIN_PERF_W_8_26_4_52_INDEX   208lu
+#define EXT_CSD_MIN_PERF_R_8_26_4_52_INDEX   207lu
+#define EXT_CSD_MIN_PERF_W_4_26_INDEX        206lu
+#define EXT_CSD_MIN_PERF_R_4_26_INDEX        205lu
+#define EXT_CSD_PWR_CL_26_360_INDEX          203lu
+#define EXT_CSD_PWR_CL_52_360_INDEX          202lu
+#define EXT_CSD_PWR_CL_26_195_INDEX          201lu
+#define EXT_CSD_PWR_CL_52_195_INDEX          200lu
+#define EXT_CSD_CARD_TYPE_INDEX              196lu
+/* MMC card type */
+#  define MMC_CTYPE_26MHZ    0x1
+#  define MMC_CTYPE_52MHZ    0x2
+#define EXT_CSD_CSD_STRUCTURE_INDEX          194lu
+#define EXT_CSD_EXT_CSD_REV_INDEX            192lu
+
+/* Below belongs to Mode Segment */
+#define EXT_CSD_CMD_SET_INDEX                191lu
+#define EXT_CSD_CMD_SET_REV_INDEX            189lu
+#define EXT_CSD_POWER_CLASS_INDEX            187lu
+#define EXT_CSD_HS_TIMING_INDEX              185lu
+#define EXT_CSD_BUS_WIDTH_INDEX              183lu
+#define EXT_CSD_ERASED_MEM_CONT_INDEX        181lu
+#define EXT_CSD_BOOT_CONFIG_INDEX            179lu
+#define EXT_CSD_BOOT_BUS_WIDTH_INDEX         177lu
+#define EXT_CSD_ERASE_GROUP_DEF_INDEX        175lu
+  //! @}
+//! @}
+
+
+//! \name Definition for SPI mode only
+//! @{
+
+//! SPI commands start with a start bit "0" and a transmit bit "1"
+#define SPI_CMD_ENCODE(x) (0x40 | (x & 0x3F))
+
+//! \name Register R1 definition for SPI mode
+//! The R1 register is always send after a command.
+//! @{
+#define R1_SPI_IDLE                 (1lu << 0)
+#define R1_SPI_ERASE_RESET          (1lu << 1)
+#define R1_SPI_ILLEGAL_COMMAND      (1lu << 2)
+#define R1_SPI_COM_CRC              (1lu << 3)
+#define R1_SPI_ERASE_SEQ            (1lu << 4)
+#define R1_SPI_ADDRESS              (1lu << 5)
+#define R1_SPI_PARAMETER            (1lu << 6)
+// R1 bit 7 is always zero, reuse this bit for error
+#define R1_SPI_ERROR                (1lu << 7)
+//! @}
+
+//! \name Register R2 definition for SPI mode
+//! The R2 register can be send after R1 register.
+//! @{
+#define R2_SPI_CARD_LOCKED      (1lu << 0)
+#define R2_SPI_WP_ERASE_SKIP    (1lu << 1)
+#define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP
+#define R2_SPI_ERROR            (1lu << 2)
+#define R2_SPI_CC_ERROR         (1lu << 3)
+#define R2_SPI_CARD_ECC_ERROR   (1lu << 4)
+#define R2_SPI_WP_VIOLATION     (1lu << 5)
+#define R2_SPI_ERASE_PARAM      (1lu << 6)
+#define R2_SPI_OUT_OF_RANGE     (1lu << 7)
+#define R2_SPI_CSD_OVERWRITE    R2_SPI_OUT_OF_RANGE
+//! @}
+
+//! \name Control Tokens in SPI Mode
+//! @{
+  //! \name Tokens used for a read operation
+  //! @{
+#define SPI_TOKEN_SINGLE_MULTI_READ       0xFE
+#define SPI_TOKEN_DATA_ERROR_VALID(token) (((token) & 0xF0) == 0)
+#define SPI_TOKEN_DATA_ERROR_ERRORS       (0x0F)
+#define SPI_TOKEN_DATA_ERROR_ERROR        (1lu << 0)
+#define SPI_TOKEN_DATA_ERROR_CC_ERROR     (1lu << 1)
+#define SPI_TOKEN_DATA_ERROR_ECC_ERROR    (1lu << 2)
+#define SPI_TOKEN_DATA_ERROR_OUT_RANGE    (1lu << 3)
+  //! @}
+  //! \name Tokens used for a write operation
+  //! @{
+#define SPI_TOKEN_SINGLE_WRITE            0xFE
+#define SPI_TOKEN_MULTI_WRITE             0xFC
+#define SPI_TOKEN_STOP_TRAN               0xFD
+#define SPI_TOKEN_DATA_RESP_VALID(token)  \
+		((((token) & (1 << 4)) == 0) && (((token) & (1 << 0)) == 1))
+#define SPI_TOKEN_DATA_RESP_CODE(token)   ((token) & 0x1E)
+#define SPI_TOKEN_DATA_RESP_ACCEPTED      (2lu << 1)
+#define SPI_TOKEN_DATA_RESP_CRC_ERR       (5lu << 1)
+#define SPI_TOKEN_DATA_RESP_WRITE_ERR     (6lu << 1)
+  //! @}
+//! @}
+//! @}
+
+
+//! @} end of sd_mmc_protocol
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SD_MMC_PROTOCOL_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/sd_mmc_spi.c b/common2/components/memory/sd_mmc/sd_mmc_spi.c
new file mode 100644
index 00000000..5fe18e26
--- /dev/null
+++ b/common2/components/memory/sd_mmc/sd_mmc_spi.c
@@ -0,0 +1,654 @@
+/**
+ * \file
+ *
+ * \brief Common SPI interface for SD/MMC stack
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include <string.h>
+#include "conf_board.h"
+#include "conf_sd_mmc.h"
+#include "sd_mmc_protocol.h"
+#include "sd_mmc_spi.h"
+
+#ifdef SD_MMC_SPI_MODE
+
+/**
+ * \ingroup sd_mmc_stack_spi
+ * \defgroup sd_mmc_stack_spi_internal Common SPI interface for SD/MMC stack
+ * implementation
+ *
+ * @{
+ */
+
+// Enable debug information for SD/MMC SPI module
+#ifdef SD_MMC_SPI_DEBUG
+#include <stdio.h>
+#define sd_mmc_spi_debug(...)      printf(__VA_ARGS__)
+#else
+#define sd_mmc_spi_debug(...)
+#endif
+
+// Check configurations
+#if (!defined SD_MMC_SPI_MEM_CNT) || (SD_MMC_SPI_MEM_CNT == 0)
+#  warning SD_MMC_SPI_MEM_CNT must be defined in conf_sd_mmc.h file.
+#  define SD_MMC_SPI_MEM_CNT 1
+#endif
+
+static struct spi_module sd_mmc_master;
+//! Slot array of SPI structures
+static struct spi_slave_inst sd_mmc_spi_devices[SD_MMC_SPI_MEM_CNT];
+static struct spi_slave_inst_config slave_configs[SD_MMC_SPI_MEM_CNT];
+uint8_t ss_pins[SD_MMC_SPI_MEM_CNT] = {SD_MMC_CS};
+
+//! Internal global error status
+static sd_mmc_spi_errno_t sd_mmc_spi_err;
+
+//! 32 bits response of the last command
+static uint32_t sd_mmc_spi_response_32;
+//! Current position (byte) of the transfer started by mci_adtc_start()
+static uint32_t sd_mmc_spi_transfert_pos;
+//! Size block requested by last mci_adtc_start()
+static uint16_t sd_mmc_spi_block_size;
+//! Total number of block requested by last mci_adtc_start()
+static uint16_t sd_mmc_spi_nb_block;
+
+static uint8_t sd_mmc_spi_crc7(uint8_t * buf, uint8_t size);
+static bool sd_mmc_spi_wait_busy(void);
+static bool sd_mmc_spi_start_read_block(void);
+static void sd_mmc_spi_stop_read_block(void);
+static void sd_mmc_spi_start_write_block(void);
+static bool sd_mmc_spi_stop_write_block(void);
+static bool sd_mmc_spi_stop_multiwrite_block(void);
+
+
+/**
+ * \brief Calculates the CRC7
+ *
+ * \param buf     Buffer data to compute
+ * \param size    Size of buffer data
+ *
+ * \return CRC7 computed
+ */
+static uint8_t sd_mmc_spi_crc7(uint8_t * buf, uint8_t size)
+{
+	uint8_t crc, value, i;
+
+	crc = 0;
+	while (size--) {
+		value = *buf++;
+		for (i = 0; i < 8; i++) {
+			crc <<= 1;
+			if ((value & 0x80) ^ (crc & 0x80)) {
+				crc ^= 0x09;
+			}
+			value <<= 1;
+		}
+	}
+	crc = (crc << 1) | 1;
+	return crc;
+}
+
+/**
+ * \brief Wait the end of busy on DAT0 line
+ *
+ * \return true if success, otherwise false
+ */
+static bool sd_mmc_spi_wait_busy(void)
+{
+	uint8_t line = 0xFF;
+	uint16_t dummy = 0xFF;
+
+	/* Delay before check busy
+	 * Nbr timing minimum = 8 cylces
+	 */
+	spi_read_buffer_wait(&sd_mmc_master, &line, 1,
+			dummy);
+
+	/* Wait end of busy signal
+	 * Nec timing: 0 to unlimited
+	 * However a timeout is used.
+	 * 200 000 * 8 cycles
+	 */
+	uint32_t nec_timeout = 200000;
+	spi_read_buffer_wait(&sd_mmc_master, &line, 1,
+			dummy);
+	do {
+		spi_read_buffer_wait(&sd_mmc_master, &line, 1,
+			dummy);
+		if (!(nec_timeout--)) {
+			return false;
+		}
+	} while (line != 0xFF);
+	return true;
+}
+
+/**
+ * \brief Sends the correct TOKEN on the line to start a read block transfer
+ *
+ * \return true if success, otherwise false
+ *         with a update of \ref sd_mmc_spi_err.
+ */
+static bool sd_mmc_spi_start_read_block(void)
+{
+	uint32_t i;
+	uint8_t token;
+	uint16_t dummy = 0xFF;
+
+	Assert(!(sd_mmc_spi_transfert_pos % sd_mmc_spi_block_size));
+
+	/* Wait for start data token:
+	 * The read timeout is the Nac timing.
+	 * Nac must be computed trough CSD values,
+	 * or it is 100ms for SDHC / SDXC
+	 * Compute the maximum timeout:
+	 * Frequency maximum = 25MHz
+	 * 1 byte = 8 cycles
+	 * 100ms = 312500 x spi_read_buffer_wait() maximum
+	 */
+	token = 0;
+	i = 500000;
+	do {
+		if (i-- == 0) {
+			sd_mmc_spi_err = SD_MMC_SPI_ERR_READ_TIMEOUT;
+			sd_mmc_spi_debug("%s: Read blocks timeout\n\r", __func__);
+			return false;
+		}
+		spi_read_buffer_wait(&sd_mmc_master, &token, 1,
+			dummy);
+		if (SPI_TOKEN_DATA_ERROR_VALID(token)) {
+			Assert(SPI_TOKEN_DATA_ERROR_ERRORS & token);
+			if (token & (SPI_TOKEN_DATA_ERROR_ERROR
+					| SPI_TOKEN_DATA_ERROR_ECC_ERROR
+					| SPI_TOKEN_DATA_ERROR_CC_ERROR)) {
+				sd_mmc_spi_debug("%s: CRC data error token\n\r", __func__);
+				sd_mmc_spi_err = SD_MMC_SPI_ERR_READ_CRC;
+			} else {
+				sd_mmc_spi_debug("%s: Out of range data error token\n\r", __func__);
+				sd_mmc_spi_err = SD_MMC_SPI_ERR_OUT_OF_RANGE;
+			}
+			return false;
+		}
+	} while (token != SPI_TOKEN_SINGLE_MULTI_READ);
+
+	return true;
+}
+
+/**
+ * \brief Executed the end of a read block transfer
+ */
+static void sd_mmc_spi_stop_read_block(void)
+{
+	uint8_t crc[2];
+	uint16_t dummy = 0xFF;
+	// Read 16-bit CRC (not cheked)
+	spi_read_buffer_wait(&sd_mmc_master, crc, 2,
+			dummy);
+}
+
+/**
+ * \brief Sends the correct TOKEN on the line to start a write block transfer
+ */
+static void sd_mmc_spi_start_write_block(void)
+{
+	uint8_t dummy = 0xFF;
+	Assert(!(sd_mmc_spi_transfert_pos % sd_mmc_spi_block_size));
+	// Delay before start write block:
+	// Nwr timing minimum = 8 cylces
+	spi_write_buffer_wait(&sd_mmc_master,&dummy, 1);
+	// Send start token
+	uint8_t token;
+	if (1 == sd_mmc_spi_nb_block) {
+		token = SPI_TOKEN_SINGLE_WRITE;
+	} else {
+		token = SPI_TOKEN_MULTI_WRITE;
+	}
+	spi_write_buffer_wait(&sd_mmc_master,&token, 1);
+}
+
+/**
+ * \brief Waits the TOKEN which notify the end of write block transfer
+ *
+ * \return true if success, otherwise false
+ *         with a update of \ref sd_mmc_spi_err.
+ */
+static bool sd_mmc_spi_stop_write_block(void)
+{
+	uint8_t resp;
+	uint16_t crc;
+	uint16_t dummy = 0xFF;
+
+	// Send CRC
+	crc = 0xFFFF; /// CRC is disabled in SPI mode
+	spi_write_buffer_wait(&sd_mmc_master, (uint8_t *)&crc, 2);
+	// Receiv data response token
+	spi_read_buffer_wait(&sd_mmc_master, &resp, 1,
+			dummy);
+	if (!SPI_TOKEN_DATA_RESP_VALID(resp)) {
+		sd_mmc_spi_err = SD_MMC_SPI_ERR;
+		sd_mmc_spi_debug("%s: Invalid Data Response Token 0x%x\n\r", __func__, resp);
+		return false;
+	}
+	// Check data response
+	switch (SPI_TOKEN_DATA_RESP_CODE(resp)) {
+	case SPI_TOKEN_DATA_RESP_ACCEPTED:
+		break;
+	case SPI_TOKEN_DATA_RESP_CRC_ERR:
+		sd_mmc_spi_err = SD_MMC_SPI_ERR_WRITE_CRC;
+		sd_mmc_spi_debug("%s: Write blocks, SD_MMC_SPI_ERR_CRC, resp 0x%x\n\r",
+				__func__, resp);
+		return false;
+	case SPI_TOKEN_DATA_RESP_WRITE_ERR:
+	default:
+		sd_mmc_spi_err = SD_MMC_SPI_ERR_WRITE;
+		sd_mmc_spi_debug("%s: Write blocks SD_MMC_SPI_ERR_WR, resp 0x%x\n\r",
+				__func__, resp);
+		return false;
+	}
+	return true;
+}
+
+/**
+ * \brief Executed the end of a multi blocks write transfer
+ *
+ * \return true if success, otherwise false
+ *         with a update of \ref sd_mmc_spi_err.
+ */
+static bool sd_mmc_spi_stop_multiwrite_block(void)
+{
+	uint8_t value;
+
+	if (1 == sd_mmc_spi_nb_block) {
+		return true; // Single block write
+	}
+	if (sd_mmc_spi_nb_block >
+		(sd_mmc_spi_transfert_pos / sd_mmc_spi_block_size)) {
+		return true; // It is not the End of multi write
+	}
+
+	// Delay before start write block:
+	// Nwr timing minimum = 8 cylces
+	value = 0xFF;
+	spi_write_buffer_wait(&sd_mmc_master, &value, 1);
+	// Send stop token
+	value = SPI_TOKEN_STOP_TRAN;
+	spi_write_buffer_wait(&sd_mmc_master, &value, 1);
+	// Wait busy
+	if (!sd_mmc_spi_wait_busy()) {
+		sd_mmc_spi_err = SD_MMC_SPI_ERR_WRITE_TIMEOUT;
+		sd_mmc_spi_debug("%s: Stop write blocks timeout\n\r",
+				__func__);
+		return false;
+	}
+	return true;
+}
+
+
+//-------------------------------------------------------------------
+//--------------------- PUBLIC FUNCTIONS ----------------------------
+
+sd_mmc_spi_errno_t sd_mmc_spi_get_errno(void)
+{
+	return sd_mmc_spi_err;
+}
+
+void sd_mmc_spi_init(void)
+{
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+
+	// Initialize card detect pin
+	struct port_config pin_conf;
+	port_get_config_defaults(&pin_conf);
+
+	// Set card detect pin as inputs
+	pin_conf.direction	= PORT_PIN_DIR_INPUT;
+	pin_conf.input_pull = PORT_PIN_PULL_UP;
+	port_pin_set_config(SD_MMC_0_CD_GPIO, &pin_conf);
+
+	// Initialize SPI interface and enable it
+	struct spi_config config;
+	spi_get_config_defaults(&config);
+
+	config.mux_setting = SD_MMC_SPI_PINMUX_SETTING;
+	config.pinmux_pad0 = SD_MMC_SPI_PINMUX_PAD0;
+	config.pinmux_pad1 = SD_MMC_SPI_PINMUX_PAD1;
+	config.pinmux_pad2 = SD_MMC_SPI_PINMUX_PAD2;
+	config.pinmux_pad3 = SD_MMC_SPI_PINMUX_PAD3;
+	config.generator_source = SD_MMC_SPI_SOURCE_CLOCK;
+	config.mode_specific.master.baudrate = SDMMC_CLOCK_INIT;
+
+	spi_init(&sd_mmc_master, SD_MMC_SPI, &config);
+	spi_enable(&sd_mmc_master);
+
+	spi_slave_inst_get_config_defaults(&slave_configs[0]);
+	slave_configs[0].ss_pin = ss_pins[0];
+	spi_attach_slave(&sd_mmc_spi_devices[0], &slave_configs[0]);
+}
+
+void sd_mmc_spi_select_device(uint8_t slot, uint32_t clock, uint8_t bus_width,
+		bool high_speed)
+{
+	UNUSED(bus_width);
+	UNUSED(high_speed);
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+
+#ifdef SD_MMC_SPI_MAX_CLOCK
+	if (clock > SD_MMC_SPI_MAX_CLOCK) {
+		clock = SD_MMC_SPI_MAX_CLOCK;
+	}
+#endif
+	while (STATUS_ERR_INVALID_ARG == spi_set_baudrate(&sd_mmc_master, clock)) {
+		clock -= clock / 8;
+	}
+	spi_select_slave(&sd_mmc_master, &sd_mmc_spi_devices[slot], true);
+}
+
+void sd_mmc_spi_deselect_device(uint8_t slot)
+{
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+	spi_select_slave(&sd_mmc_master, &sd_mmc_spi_devices[slot], false);
+}
+
+void sd_mmc_spi_send_clock(void)
+{
+	uint8_t i;
+	uint8_t dummy = 0xFF;
+
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+	//! Send 80 cycles
+	for (i = 0; i < 10; i++) {
+		spi_write_buffer_wait(&sd_mmc_master, &dummy, 1); // 8 cycles
+	}
+}
+
+bool sd_mmc_spi_send_cmd(sdmmc_cmd_def_t cmd, uint32_t arg)
+{
+	return sd_mmc_spi_adtc_start(cmd, arg, 0, 0, false);
+}
+
+bool sd_mmc_spi_adtc_start(sdmmc_cmd_def_t cmd, uint32_t arg,
+		uint16_t block_size, uint16_t nb_block, bool access_block)
+{
+	uint8_t dummy = 0xFF;
+	uint8_t cmd_token[6];
+	uint8_t ncr_timeout;
+	uint8_t r1; //! R1 response
+	uint16_t dummy2 = 0xFF;
+
+	UNUSED(access_block);
+	Assert(cmd & SDMMC_RESP_PRESENT); // Always a response in SPI mode
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+
+	// Encode SPI command
+	cmd_token[0] = SPI_CMD_ENCODE(SDMMC_CMD_GET_INDEX(cmd));
+	cmd_token[1] = arg >> 24;
+	cmd_token[2] = arg >> 16;
+	cmd_token[3] = arg >> 8;
+	cmd_token[4] = arg;
+	cmd_token[5] = sd_mmc_spi_crc7(cmd_token, 5);
+
+	// 8 cycles to respect Ncs timing
+	// Note: This byte does not include start bit "0",
+	// thus it is ignored by card.
+	spi_write_buffer_wait(&sd_mmc_master, &dummy, 1);
+	// Send command
+	spi_write_buffer_wait(&sd_mmc_master, cmd_token, sizeof(cmd_token));
+
+	// Wait for response
+	// Two retry will be done to manage the Ncr timing between command and reponse
+	// Ncr: Min. 1x8 clock  cycle, Max. 8x8 clock cycles
+	// WORKAROUND for no compliance card (Atmel Internal ref. SD13):
+	r1 = 0xFF;
+	// Ignore first byte because Ncr min. = 8 clock cylces
+	spi_read_buffer_wait(&sd_mmc_master, &r1, 1,
+			dummy2);
+	ncr_timeout = 7;
+	while (1) {
+		spi_read_buffer_wait(&sd_mmc_master, &r1, 1,
+			dummy2); // 8 cycles
+		if ((r1 & R1_SPI_ERROR) == 0) {
+			// Valid R1 response
+			break;
+		}
+		if (--ncr_timeout == 0) {
+			// Here Valid R1 response received
+			sd_mmc_spi_debug("%s: cmd %02d, arg 0x%08lX, R1 timeout\n\r",
+					__func__, (int)SDMMC_CMD_GET_INDEX(cmd), arg);
+			sd_mmc_spi_err = SD_MMC_SPI_ERR_RESP_TIMEOUT;
+			return false;
+		}
+	}
+
+	// Save R1 (Specific to SPI interface) in 32 bit response
+	// The R1_SPI_IDLE bit can be checked by high level
+	sd_mmc_spi_response_32 = r1;
+
+	// Manage error in R1
+	if (r1 & R1_SPI_COM_CRC) {
+		sd_mmc_spi_debug("%s: cmd %02d, arg 0x%08lx, r1 0x%02x, R1_SPI_COM_CRC\n\r",
+				__func__, (int)SDMMC_CMD_GET_INDEX(cmd), arg, r1);
+		sd_mmc_spi_err = SD_MMC_SPI_ERR_RESP_CRC;
+		return false;
+	}
+	if (r1 & R1_SPI_ILLEGAL_COMMAND) {
+		sd_mmc_spi_debug("%s: cmd %02d, arg 0x%08lx, r1 0x%x, R1 ILLEGAL_COMMAND\n\r",
+				__func__, (int)SDMMC_CMD_GET_INDEX(cmd), arg, r1);
+		sd_mmc_spi_err = SD_MMC_SPI_ERR_ILLEGAL_COMMAND;
+		return false;
+	}
+	if (r1 & ~R1_SPI_IDLE) {
+		// Other error
+		sd_mmc_spi_debug("%s: cmd %02d, arg 0x%08lx, r1 0x%x, R1 error\n\r",
+				__func__, (int)SDMMC_CMD_GET_INDEX(cmd), arg, r1);
+		sd_mmc_spi_err = SD_MMC_SPI_ERR;
+		return false;
+	}
+
+	// Manage other responses
+	if (cmd & SDMMC_RESP_BUSY) {
+		if (!sd_mmc_spi_wait_busy()) {
+			sd_mmc_spi_err = SD_MMC_SPI_ERR_RESP_BUSY_TIMEOUT;
+			sd_mmc_spi_debug("%s: cmd %02d, arg 0x%08lx, Busy signal always high\n\r",
+					__func__, (int)SDMMC_CMD_GET_INDEX(cmd), arg);
+			return false;
+		}
+	}
+	if (cmd & SDMMC_RESP_8) {
+		sd_mmc_spi_response_32 = 0;
+		spi_read_buffer_wait(&sd_mmc_master, (uint8_t *)&sd_mmc_spi_response_32, 1,
+			dummy2);
+		sd_mmc_spi_response_32 = le32_to_cpu(sd_mmc_spi_response_32);
+	}
+	if (cmd & SDMMC_RESP_32) {
+		spi_read_buffer_wait(&sd_mmc_master, (uint8_t *)&sd_mmc_spi_response_32, 4,
+			dummy2);
+		sd_mmc_spi_response_32 = be32_to_cpu(sd_mmc_spi_response_32);
+	}
+
+	sd_mmc_spi_block_size = block_size;
+	sd_mmc_spi_nb_block = nb_block;
+	sd_mmc_spi_transfert_pos = 0;
+	return true; // Command complete
+}
+
+uint32_t sd_mmc_spi_get_response(void)
+{
+	return sd_mmc_spi_response_32;
+}
+
+bool sd_mmc_spi_read_word(uint32_t* value)
+{
+	uint16_t dummy = 0xFF;
+
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+	Assert(sd_mmc_spi_nb_block >
+			(sd_mmc_spi_transfert_pos / sd_mmc_spi_block_size));
+
+	if (!(sd_mmc_spi_transfert_pos % sd_mmc_spi_block_size)) {
+		// New block
+		if (!sd_mmc_spi_start_read_block()) {
+			return false;
+		}
+	}
+	// Read data
+	spi_read_buffer_wait(&sd_mmc_master, (uint8_t *)&value, 4,
+			dummy);
+	*value = le32_to_cpu(*value);
+	sd_mmc_spi_transfert_pos += 4;
+
+	if (!(sd_mmc_spi_transfert_pos % sd_mmc_spi_block_size)) {
+		// End of block
+		sd_mmc_spi_stop_read_block();
+	}
+	return true;
+}
+
+bool sd_mmc_spi_write_word(uint32_t value)
+{
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+	Assert(sd_mmc_spi_nb_block >
+			(sd_mmc_spi_transfert_pos / sd_mmc_spi_block_size));
+
+	if (!(sd_mmc_spi_transfert_pos % sd_mmc_spi_block_size)) {
+		// New block
+		sd_mmc_spi_start_write_block();
+	}
+
+	// Write data
+	value = cpu_to_le32(value);
+	spi_write_buffer_wait(&sd_mmc_master, (uint8_t*)&value, 4);
+	sd_mmc_spi_transfert_pos += 4;
+
+	if (!(sd_mmc_spi_transfert_pos % sd_mmc_spi_block_size)) {
+		// End of block
+		if (!sd_mmc_spi_stop_write_block()) {
+			return false;
+		}
+		// Wait busy due to data programmation
+		if (!sd_mmc_spi_wait_busy()) {
+			sd_mmc_spi_err = SD_MMC_SPI_ERR_WRITE_TIMEOUT;
+			sd_mmc_spi_debug("%s: Write blocks timeout\n\r", __func__);
+			return false;
+		}
+	}
+	return sd_mmc_spi_stop_multiwrite_block();
+}
+
+bool sd_mmc_spi_start_read_blocks(void *dest, uint16_t nb_block)
+{
+	uint32_t pos;
+	uint16_t dummy = 0xFF;
+
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+	pos = 0;
+	while (nb_block--) {
+		Assert(sd_mmc_spi_nb_block >
+				(sd_mmc_spi_transfert_pos / sd_mmc_spi_block_size));
+		if (!sd_mmc_spi_start_read_block()) {
+			return false;
+		}
+
+		// Read block
+		spi_read_buffer_wait(&sd_mmc_master, &((uint8_t*)dest)[pos],
+			sd_mmc_spi_block_size, dummy);
+		pos += sd_mmc_spi_block_size;
+		sd_mmc_spi_transfert_pos += sd_mmc_spi_block_size;
+
+		sd_mmc_spi_stop_read_block();
+	}
+	return true;
+}
+
+bool sd_mmc_spi_wait_end_of_read_blocks(void)
+{
+	return true;
+}
+
+bool sd_mmc_spi_start_write_blocks(const void *src, uint16_t nb_block)
+{
+	uint32_t pos;
+
+	sd_mmc_spi_err = SD_MMC_SPI_NO_ERR;
+	pos = 0;
+	while (nb_block--) {
+		Assert(sd_mmc_spi_nb_block >
+				(sd_mmc_spi_transfert_pos / sd_mmc_spi_block_size));
+		sd_mmc_spi_start_write_block();
+
+		// Write block
+		spi_write_buffer_wait(&sd_mmc_master, &((uint8_t*)src)[pos],
+				sd_mmc_spi_block_size);
+		pos += sd_mmc_spi_block_size;
+		sd_mmc_spi_transfert_pos += sd_mmc_spi_block_size;
+
+		if (!sd_mmc_spi_stop_write_block()) {
+			return false;
+		}
+		// Do not check busy of last block
+		// but delay it to mci_wait_end_of_write_blocks()
+		if (nb_block) {
+			// Wait busy due to data programmation
+			if (!sd_mmc_spi_wait_busy()) {
+				sd_mmc_spi_err = SD_MMC_SPI_ERR_WRITE_TIMEOUT;
+				sd_mmc_spi_debug("%s: Write blocks timeout\n\r", __func__);
+				return false;
+			}
+		}
+	}
+	return true;
+}
+
+bool sd_mmc_spi_wait_end_of_write_blocks(void)
+{
+	// Wait busy due to data programmation of last block writed
+	if (!sd_mmc_spi_wait_busy()) {
+		sd_mmc_spi_err = SD_MMC_SPI_ERR_WRITE_TIMEOUT;
+		sd_mmc_spi_debug("%s: Write blocks timeout\n\r", __func__);
+		return false;
+	}
+	return sd_mmc_spi_stop_multiwrite_block();
+}
+
+//! @}
+
+#endif // SD_MMC_SPI_MODE
diff --git a/common2/components/memory/sd_mmc/sd_mmc_spi.h b/common2/components/memory/sd_mmc/sd_mmc_spi.h
new file mode 100644
index 00000000..8a9faec5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/sd_mmc_spi.h
@@ -0,0 +1,237 @@
+/**
+ * \file
+ *
+ * \brief Common SPI interface for SD/MMC stack
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef SD_MMC_SPI_H_INCLUDED
+#define SD_MMC_SPI_H_INCLUDED
+
+#include "compiler.h"
+#include "sd_mmc_protocol.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup sd_mmc_stack_group
+ * \defgroup sd_mmc_stack_spi Common SPI interface for SD/MMC stack
+ * @{
+ */
+
+//! Type of return error code
+typedef uint8_t sd_mmc_spi_errno_t;
+
+//! \name Return error codes
+//! @{
+#define SD_MMC_SPI_NO_ERR                 0 //! No error
+#define SD_MMC_SPI_ERR                    1 //! General or an unknown error
+#define SD_MMC_SPI_ERR_RESP_TIMEOUT       2 //! Timeout during command
+#define SD_MMC_SPI_ERR_RESP_BUSY_TIMEOUT  3 //! Timeout on busy signal of R1B response
+#define SD_MMC_SPI_ERR_READ_TIMEOUT       4 //! Timeout during read operation
+#define SD_MMC_SPI_ERR_WRITE_TIMEOUT      5 //! Timeout during write operation
+#define SD_MMC_SPI_ERR_RESP_CRC           6 //! Command CRC error
+#define SD_MMC_SPI_ERR_READ_CRC           7 //! CRC error during read operation
+#define SD_MMC_SPI_ERR_WRITE_CRC          8 //! CRC error during write operation
+#define SD_MMC_SPI_ERR_ILLEGAL_COMMAND    9 //! Command not supported
+#define SD_MMC_SPI_ERR_WRITE             10 //! Error during write operation
+#define SD_MMC_SPI_ERR_OUT_OF_RANGE      11 //! Data access out of range
+//! @}
+
+
+/** \brief Return the error code of last function
+ *
+ * \return error code
+ */
+sd_mmc_spi_errno_t sd_mmc_spi_get_errno(void);
+
+/** \brief Initializes the low level driver
+ *
+ * This enable the clock required and the hardware interface.
+ */
+void sd_mmc_spi_init(void);
+
+/** \brief Return the maximum bus width of a slot
+ *
+ * \param slot     Selected slot
+ *
+ * \return 1, 4 or 8 lines.
+ */
+static __inline__ uint8_t sd_mmc_spi_get_bus_width(uint8_t slot) {
+	UNUSED(slot);
+	return 1;
+}
+
+/** \brief Return the high speed capability of the driver
+ *
+ * \return true, if the high speed is supported
+ */
+static __inline__ bool sd_mmc_spi_is_high_speed_capable(void) {
+	return false;
+}
+
+/**
+ * \brief Select a slot and initialize it
+ *
+ * \param slot       Selected slot
+ * \param clock      Maximum clock to use (Hz)
+ * \param bus_width  Bus width to use (1, 4 or 8)
+ * \param high_speed true, to enable high speed mode
+ */
+void sd_mmc_spi_select_device(uint8_t slot, uint32_t clock, uint8_t bus_width,
+		bool high_speed);
+
+/**
+ * \brief Deselect a slot
+ *
+ * \param slot       Selected slot
+ */
+void sd_mmc_spi_deselect_device(uint8_t slot);
+
+/** \brief Send 74 clock cycles on the line of selected slot
+ * Note: It is required after card plug and before card install.
+ */
+void sd_mmc_spi_send_clock(void);
+
+/** \brief Send a command on the selected slot
+ *
+ * \param cmd        Command definition
+ * \param arg        Argument of the command
+ *
+ * \return true if success, otherwise false
+ */
+bool sd_mmc_spi_send_cmd(sdmmc_cmd_def_t cmd, uint32_t arg);
+
+/** \brief Return the 32 bits response of the last command
+ *
+ * \return 32 bits response
+ */
+uint32_t sd_mmc_spi_get_response(void);
+static __inline__ void sd_mmc_spi_get_response_128(uint8_t *resp) {
+	UNUSED(resp);
+	return;
+}
+
+
+/** \brief Send a adtc command on the selected slot
+ * A adtc command is used for read/write access.
+ *
+ * \param cmd          Command definition
+ * \param arg          Argument of the command
+ * \param block_size   Block size used for the transfer
+ * \param nb_block     Total number of block for this transfer
+ * \param access_block if true, the x_read_blocks() and x_write_blocks()
+ * functions must be used after this function.
+ * If false, the mci_read_word() and mci_write_word()
+ * functions must be used after this function.
+ *
+ * \return true if success, otherwise false
+ */
+bool sd_mmc_spi_adtc_start(sdmmc_cmd_def_t cmd, uint32_t arg,
+		uint16_t block_size, uint16_t nb_block, bool access_block);
+
+/** \brief Send a command to stop a adtc command on the selected slot
+ *
+ * \param cmd        Command definition
+ * \param arg        Argument of the command
+ *
+ * \return true if success, otherwise false
+ */
+bool sd_mmc_spi_adtc_stop(sdmmc_cmd_def_t cmd, uint32_t arg);
+
+/** \brief Read a word on the line
+ *
+ * \param value  Pointer on a word to fill
+ *
+ * \return true if success, otherwise false
+ */
+bool sd_mmc_spi_read_word(uint32_t* value);
+
+/** \brief Write a word on the line
+ *
+ * \param value  Word to send
+ *
+ * \return true if success, otherwise false
+ */
+bool sd_mmc_spi_write_word(uint32_t value);
+
+/** \brief Start a read blocks transfer on the line
+ * Note: The driver will use the DMA available to speed up the transfer.
+ *
+ * \param dest       Pointer on the buffer to fill
+ * \param nb_block   Number of block to transfer
+ *
+ * \return true if started, otherwise false
+ */
+bool sd_mmc_spi_start_read_blocks(void *dest, uint16_t nb_block);
+
+/** \brief Wait the end of transfer initiated by mci_start_read_blocks()
+ *
+ * \return true if success, otherwise false
+ */
+bool sd_mmc_spi_wait_end_of_read_blocks(void);
+
+/** \brief Start a write blocks transfer on the line
+ * Note: The driver will use the DMA available to speed up the transfer.
+ *
+ * \param src        Pointer on the buffer to send
+ * \param nb_block   Number of block to transfer
+ *
+ * \return true if started, otherwise false
+ */
+bool sd_mmc_spi_start_write_blocks(const void *src, uint16_t nb_block);
+
+/** \brief Wait the end of transfer initiated by mci_start_write_blocks()
+ *
+ * \return true if success, otherwise false
+ */
+bool sd_mmc_spi_wait_end_of_write_blocks(void);
+
+//! @}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SD_MMC_SPI_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..56f4ec6f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..0a3a68a9
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,172 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_test.h b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_test.h
new file mode 100644
index 00000000..a414ddc7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/conf_test.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro test configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H_INCLUDED
+#define CONF_TEST_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_TEST_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..c8df7eb0
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Unit Tests for the SAMD20 SD/MMC driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../unit_tests.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../common/utils/unit_test/suite.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/samd20_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_sd_mmc.h ../conf_spi.h ../conf_test.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h ../../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h ../../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h ../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h ../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../common/utils/unit_test/suite.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd20/include ../../../../../../../sam0/utils/cmsis/samd20/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd20 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd20_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true TEST_SUITE_DEFINE_ASSERT_MACRO _ASSERT_ENABLE_ SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAMD20_XPLAINED_PRO __SAMD20J18__ __SAMD20J18__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..9b6ff606
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..d2b2f9ea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc/config.mk
@@ -0,0 +1,182 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_unit_tests_flash.elf
+TARGET_SRAM = sd_mmc_unit_tests_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/components/memory/sd_mmc/unit_tests/unit_tests.c \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/unit_tests        \
+       common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..9b6ff606
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests.eww b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests.eww
new file mode 100644
index 00000000..16af509a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_unit_tests_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
new file mode 100644
index 00000000..7e71700b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
new file mode 100644
index 00000000..d1c14415
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd20j18_samd20_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
@@ -0,0 +1,2701 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd20</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd20_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>unit_tests</name>
+						<file>
+							<name>$PROJ_DIR$/../../unit_tests.c</name>
+						</file>
+						<group>
+							<name>samd20j18_samd20_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_test.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..ad644c05
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..a0ee3392
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         true
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               false
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          true
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        true
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_test.h b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_test.h
new file mode 100644
index 00000000..07e0a2cd
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/conf_test.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro test configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H_INCLUDED
+#define CONF_TEST_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_TEST_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..ab6a9bc4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Unit Tests for the SAMD21 SD/MMC driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../unit_tests.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../common/utils/unit_test/suite.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_sd_mmc.h ../conf_spi.h ../conf_test.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h ../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h ../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../common/utils/unit_test/suite.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samd21/include ../../../../../../../sam0/utils/cmsis/samd21/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samd21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true TEST_SUITE_DEFINE_ASSERT_MACRO _ASSERT_ENABLE_ SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAMD21_XPLAINED_PRO __SAMD21J18A__ __SAMD21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..e0bc212b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..a4e78a91
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc/config.mk
@@ -0,0 +1,182 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_unit_tests_flash.elf
+TARGET_SRAM = sd_mmc_unit_tests_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/components/memory/sd_mmc/unit_tests/unit_tests.c \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/unit_tests        \
+       common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..e0bc212b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests.eww b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests.eww
new file mode 100644
index 00000000..16af509a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_unit_tests_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
new file mode 100644
index 00000000..451f82ab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
new file mode 100644
index 00000000..fce876f7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samd21j18a_samd21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
@@ -0,0 +1,2740 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>unit_tests</name>
+						<file>
+							<name>$PROJ_DIR$/../../unit_tests.c</name>
+						</file>
+						<group>
+							<name>samd21j18a_samd21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_test.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..667fac38
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_test.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_test.h
new file mode 100644
index 00000000..4d98422e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/conf_test.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro test configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H_INCLUDED
+#define CONF_TEST_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_TEST_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..69ebb06c
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Unit Tests for the SAM L21 SD/MMC driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../unit_tests.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../common/utils/unit_test/suite.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/saml21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_sd_mmc.h ../conf_spi.h ../conf_test.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h ../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../common/utils/unit_test/suite.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml21/include ../../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true TEST_SUITE_DEFINE_ASSERT_MACRO _ASSERT_ENABLE_ SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAML21_XPLAINED_PRO __SAML21J18A__ __SAML21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..c1be4a88
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..e1d36a26
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,182 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_unit_tests_flash.elf
+TARGET_SRAM = sd_mmc_unit_tests_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/components/memory/sd_mmc/unit_tests/unit_tests.c \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/unit_tests        \
+       common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include                    \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAML21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..c1be4a88
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests.eww b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests.eww
new file mode 100644
index 00000000..16af509a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_unit_tests_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
new file mode 100644
index 00000000..250c73cf
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
new file mode 100644
index 00000000..acb9aa1c
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18a_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
@@ -0,0 +1,2632 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h</name>
+							</file>
+						</group>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>unit_tests</name>
+						<file>
+							<name>$PROJ_DIR$/../../unit_tests.c</name>
+						</file>
+						<group>
+							<name>saml21j18a_saml21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_test.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..a439e52c
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,201 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..2ccd8b3f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_test.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_test.h
new file mode 100644
index 00000000..4d98422e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/conf_test.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro test configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H_INCLUDED
+#define CONF_TEST_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_TEST_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..57798d50
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Unit Tests for the SAM L21 SD/MMC driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../unit_tests.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../common/utils/unit_test/suite.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_sd_mmc.h ../conf_spi.h ../conf_test.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h ../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h ../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../common/utils/unit_test/suite.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml21/include_b ../../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml21_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true TEST_SUITE_DEFINE_ASSERT_MACRO _ASSERT_ENABLE_ SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAML21_XPLAINED_PRO __SAML21J18B__ __SAML21J18B__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..c1be4a88
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..dfcc4fe0
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,182 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18b
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_unit_tests_flash.elf
+TARGET_SRAM = sd_mmc_unit_tests_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/components/memory/sd_mmc/unit_tests/unit_tests.c \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml21_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/unit_tests        \
+       common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include_b                  \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAML21J18B__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..c1be4a88
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests.eww b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests.eww
new file mode 100644
index 00000000..16af509a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_unit_tests_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
new file mode 100644
index 00000000..2bca7a88
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18b-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
new file mode 100644
index 00000000..1712bf70
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml21j18b_saml21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
@@ -0,0 +1,2674 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include_b</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>unit_tests</name>
+						<file>
+							<name>$PROJ_DIR$/../../unit_tests.c</name>
+						</file>
+						<group>
+							<name>saml21j18b_saml21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_test.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..7a526ec5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..1f61b945
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_test.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_test.h
new file mode 100644
index 00000000..d297a262
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/conf_test.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro test configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H_INCLUDED
+#define CONF_TEST_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_TEST_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..a6feaffb
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Unit Tests for the SAM L22 SD/MMC driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../unit_tests.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../common/utils/unit_test/suite.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_sd_mmc.h ../conf_spi.h ../conf_test.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../common/utils/unit_test/suite.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true TEST_SUITE_DEFINE_ASSERT_MACRO _ASSERT_ENABLE_ SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAML22_XPLAINED_PRO __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..67e7f12f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..62713ceb
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc/config.mk
@@ -0,0 +1,182 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_unit_tests_flash.elf
+TARGET_SRAM = sd_mmc_unit_tests_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/components/memory/sd_mmc/unit_tests/unit_tests.c \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml22_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/unit_tests        \
+       common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..67e7f12f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests.eww b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests.eww
new file mode 100644
index 00000000..16af509a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_unit_tests_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
new file mode 100644
index 00000000..03c7016f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
new file mode 100644
index 00000000..934bf911
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
@@ -0,0 +1,2659 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>unit_tests</name>
+						<file>
+							<name>$PROJ_DIR$/../../unit_tests.c</name>
+						</file>
+						<group>
+							<name>saml22n18a_saml22_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_test.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_board.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_clocks.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h
new file mode 100644
index 00000000..7a526ec5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h
new file mode 100644
index 00000000..1f61b945
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_spi.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_test.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_test.h
new file mode 100644
index 00000000..e818d0a1
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/conf_test.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B test configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H_INCLUDED
+#define CONF_TEST_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_TEST_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..937ccb2b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Unit Tests for the SAM L22 SD/MMC driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../unit_tests.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../common/utils/unit_test/suite.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../conf_sd_mmc.h ../conf_spi.h ../conf_test.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../common/utils/unit_test/suite.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/saml22_xplained_pro_b ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true TEST_SUITE_DEFINE_ASSERT_MACRO _ASSERT_ENABLE_ SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAML22_XPLAINED_PRO_B __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/Makefile b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/asf.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..67e7f12f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/config.mk b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..72326d61
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,182 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_unit_tests_flash.elf
+TARGET_SRAM = sd_mmc_unit_tests_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/components/memory/sd_mmc/unit_tests/unit_tests.c \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/saml22_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/unit_tests        \
+       common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO_B                     \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/asf.h b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..67e7f12f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests.eww b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests.eww
new file mode 100644
index 00000000..16af509a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_unit_tests_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests_flash.ewd b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests_flash.ewd
new file mode 100644
index 00000000..69c49251
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests_flash.ewp b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests_flash.ewp
new file mode 100644
index 00000000..d72a591e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/saml22n18a_saml22_xplained_pro_b/iar/sd_mmc_unit_tests_flash.ewp
@@ -0,0 +1,2659 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>unit_tests</name>
+						<file>
+							<name>$PROJ_DIR$/../../unit_tests.c</name>
+						</file>
+						<group>
+							<name>saml22n18a_saml22_xplained_pro_b</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_test.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..814b959e
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..07e5d6a5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         true
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    false
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000/32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 8)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 8)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               false
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          true
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        true
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..2d08abd4
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT1_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT1_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT1_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..b4187ac5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_test.h b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_test.h
new file mode 100644
index 00000000..7e4f4483
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/conf_test.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro test configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H_INCLUDED
+#define CONF_TEST_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_TEST_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..7875e1c7
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Unit Tests for the SAMR21 SD/MMC driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../unit_tests.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../common/utils/unit_test/suite.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/samr21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_sd_mmc.h ../conf_spi.h ../conf_test.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/port.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h ../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h ../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../../common/utils/unit_test/suite.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samr21/include ../../../../../../../sam0/utils/cmsis/samr21/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samr21_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true TEST_SUITE_DEFINE_ASSERT_MACRO _ASSERT_ENABLE_ SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAMR21_XPLAINED_PRO __SAMR21G18A__ __SAMR21G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..e0bc212b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..68c8c363
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc/config.mk
@@ -0,0 +1,182 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr21g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_unit_tests_flash.elf
+TARGET_SRAM = sd_mmc_unit_tests_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/components/memory/sd_mmc/unit_tests/unit_tests.c \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samr21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr21/source/gcc/startup_samr21.c \
+       sam0/utils/cmsis/samr21/source/system_samr21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/unit_tests        \
+       common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr21/include                    \
+       sam0/utils/cmsis/samr21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR21_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAMR21G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..e0bc212b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests.eww b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests.eww
new file mode 100644
index 00000000..16af509a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_unit_tests_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
new file mode 100644
index 00000000..4fe70101
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR21\samr21g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
new file mode 100644
index 00000000..bbdbc0e1
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr21g18a_samr21_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
@@ -0,0 +1,2608 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>unit_tests</name>
+						<file>
+							<name>$PROJ_DIR$/../../unit_tests.c</name>
+						</file>
+						<group>
+							<name>samr21g18a_samr21_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_test.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/iar/startup_samr21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_board.h b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_board.h
new file mode 100644
index 00000000..29176c86
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_clocks.h b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..979269ed
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h
new file mode 100644
index 00000000..b028bbcc
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_sd_mmc.h
@@ -0,0 +1,83 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC stack configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SD_MMC_H_INCLUDED
+#define CONF_SD_MMC_H_INCLUDED
+
+// Define to enable the SPI mode instead of Multimedia Card interface mode
+#define SD_MMC_SPI_MODE
+
+// Define to enable the SDIO support
+//#define SDIO_SUPPORT_ENABLE
+
+// Define to enable the debug trace to the current standard output (stdio)
+//#define SD_MMC_DEBUG
+
+// Define to memory count
+#define SD_MMC_SPI_MEM_CNT          1
+
+//! Select the SPI module SD/MMC is connected to
+#define SD_MMC_SPI                 EXT3_SPI_MODULE
+
+#define SD_MMC_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#define SD_MMC_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#define SD_MMC_SPI_PINMUX_PAD1     EXT3_SPI_SERCOM_PINMUX_PAD1
+#define SD_MMC_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#define SD_MMC_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+#define SD_MMC_CS                  EXT3_PIN_15
+
+#define SD_MMC_0_CD_GPIO           (EXT3_PIN_10)
+#define SD_MMC_0_CD_DETECT_VALUE   0
+
+// Define the SPI clock source
+#define SD_MMC_SPI_SOURCE_CLOCK    GCLK_GENERATOR_0
+
+// Define the SPI max clock
+#define SD_MMC_SPI_MAX_CLOCK       10000000
+
+#endif /* CONF_SD_MMC_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h
new file mode 100644
index 00000000..00512bdf
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific sleep manager configuration
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SLEEPMGR_INCLUDED
+#define CONF_SLEEPMGR_INCLUDED
+
+// Sleep manager options
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_spi.h b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..f44cac37
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 SPI configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_test.h b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_test.h
new file mode 100644
index 00000000..eefb437d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/conf_test.h
@@ -0,0 +1,58 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro test configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H_INCLUDED
+#define CONF_TEST_H_INCLUDED
+
+#define CONF_STDIO_USART          EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING    EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0    EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1    EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2    EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3    EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE       38400
+
+#endif /* CONF_TEST_H_INCLUDED */
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..4745a89b
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Unit Tests for the SAM R30 SD/MMC driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = USART_CALLBACK_MODE SPI_CALLBACK_MODE
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../unit_tests.c ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c ../../../../../../../sam0/drivers/sercom/usart/usart.c ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c ../../../../../../../sam0/drivers/sercom/sercom.c ../../../../../../../sam0/drivers/sercom/sercom_interrupt.c ../../../../../../../sam0/drivers/system/system.c ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c ../../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../../sam0/utils/stdio/read.c ../../../../../../../sam0/utils/stdio/write.c ../../../../../../../common/utils/unit_test/suite.c ../../../sd_mmc.c ../../../sd_mmc_spi.c ../../../../../../../sam0/drivers/sercom/spi/spi.c ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c ../../../../../../../sam0/drivers/port/port.c ../../../../../../services/delay/sam0/cycle_counter.c ../../../../../../../sam0/boards/samr30_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../conf_sd_mmc.h ../conf_spi.h ../conf_test.h ../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../../common/services/serial/sam0_usart/usart_serial.h ../../../../../../../common/services/serial/serial.h ../../../../../../../sam0/utils/compiler.h ../../../../../../../sam0/utils/header_files/io.h ../../../../../../../sam0/utils/status_codes.h ../../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../../common/utils/interrupt.h ../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../../common/utils/parts.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/port.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h ../../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h ../../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h ../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h ../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h ../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h ../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h ../../../../../../../sam0/drivers/sercom/usart/usart.h ../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom.h ../../../../../../../sam0/drivers/sercom/sercom_interrupt.h ../../../../../../../sam0/drivers/sercom/sercom_pinout.h ../../../../../../../sam0/drivers/system/system.h ../../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h ../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h ../../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h ../../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../../common/utils/unit_test/suite.h ../../../sd_mmc.h ../../../sd_mmc_spi.h ../../../sd_mmc_protocol.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h ../../../../../../../sam0/drivers/sercom/spi/spi.h ../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h ../../../../../../../sam0/drivers/port/port.h ../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../services/delay/delay.h ../../../../../../services/delay/sam0/cycle_counter.h ../../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h ../../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../../sam0/drivers/sercom/usart/quick_start ../../../../../../../sam0/drivers/sercom/usart/quick_start_callback ../../../../../../../sam0/drivers/sercom/usart/quick_start_dma ../../../../../../../sam0/drivers/sercom/usart/quick_start_lin ../../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../../sam0/drivers/sercom/spi/quick_start_dma ../../../../../../../sam0/drivers/sercom/spi/quick_start_master ../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave ../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback ../../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../../../../../../sam0/drivers/sercom/usart/docimg
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../.. ../../../../../../../sam0/utils/stdio/stdio_serial ../../../../../../../common/services/serial ../../../../../../../sam0/utils ../../../../../../../sam0/utils/header_files ../../../../../../../sam0/utils/preprocessor ../../../../../../../common/utils ../../../../../../../sam0/utils/cmsis/samr30/include ../../../../../../../sam0/utils/cmsis/samr30/source ../../../../../../../sam0/drivers/sercom/usart ../../../../../../../sam0/drivers/sercom ../../../../../../../sam0/drivers/system ../../../../../../../sam0/drivers/system/clock ../../../../../../../sam0/drivers/system/clock/clock_samr30 ../../../../../../../sam0/drivers/system/interrupt ../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30 ../../../../../../../sam0/drivers/system/pinmux ../../../../../../../sam0/drivers/system/power ../../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../../sam0/drivers/system/reset ../../../../../../../sam0/drivers/system/reset/reset_sam_l ../../.. ../../../../../../../sam0/drivers/sercom/spi ../../../../../../../sam0/drivers/port ../../../../../../services/delay ../../../../../../services/delay/sam0 ../../../../../../../sam0/boards ../../../../../../../sam0/boards/samr30_xplained_pro ../../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM0PLUS=true USART_CALLBACK_MODE=true TEST_SUITE_DEFINE_ASSERT_MACRO _ASSERT_ENABLE_ SPI_CALLBACK_MODE=true CYCLE_MODE BOARD=SAMR30_XPLAINED_PRO __SAMR30G18A__ __SAMR30G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/Makefile b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..db035aea
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/asf.h b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..f014819d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/config.mk b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..e65d1e4f
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc/config.mk
@@ -0,0 +1,182 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr30g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = sd_mmc_unit_tests_flash.elf
+TARGET_SRAM = sd_mmc_unit_tests_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/sd_mmc/sd_mmc.c          \
+       common2/components/memory/sd_mmc/sd_mmc_spi.c      \
+       common2/components/memory/sd_mmc/unit_tests/unit_tests.c \
+       common2/services/delay/sam0/cycle_counter.c        \
+       sam0/boards/samr30_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samr30/clock.c     \
+       sam0/drivers/system/clock/clock_samr30/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr30/source/gcc/startup_samr30.c \
+       sam0/utils/cmsis/samr30/source/system_samr30.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/sd_mmc                   \
+       common2/components/memory/sd_mmc/unit_tests        \
+       common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr30_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samr30             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr30 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr30/include                    \
+       sam0/utils/cmsis/samr30/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR30_XPLAINED_PRO                       \
+       -D CYCLE_MODE                                      \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAMR30G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+                                                          \
+       -Wl,--defsym,STACK_SIZE=0x2000                     \
+       -Wl,--defsym,__stack_size__=0x2000
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/asf.h b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..f014819d
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SD/MMC stack on SPI interface

+#include <sd_mmc.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests.eww b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests.eww
new file mode 100644
index 00000000..16af509a
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\sd_mmc_unit_tests_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
new file mode 100644
index 00000000..356aca08
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR30\samr30g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
new file mode 100644
index 00000000..45832dab
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/samr30g18a_samr30_xplained_pro/iar/sd_mmc_unit_tests_flash.ewp
@@ -0,0 +1,2602 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>CYCLE_MODE</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../services/delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>sd_mmc_unit_tests_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr30</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/iar/startup_samr30.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/utils/cmsis/samr30/include/samr30.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr30_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>sd_mmc</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.c</name>
+					</file>
+					<group>
+						<name>unit_tests</name>
+						<file>
+							<name>$PROJ_DIR$/../../unit_tests.c</name>
+						</file>
+						<group>
+							<name>samr30g18a_samr30_xplained_pro</name>
+							<file>
+								<name>$PROJ_DIR$/../conf_board.h</name>
+							</file>
+							<group>
+								<name>iar</name>
+								<file>
+									<name>$PROJ_DIR$/asf.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../conf_sd_mmc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_test.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_spi.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../conf_clocks.h</name>
+							</file>
+						</group>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_spi.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sd_mmc_protocol.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../services/delay/sam0/cycle_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../services/delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/sd_mmc/unit_tests/unit_tests.c b/common2/components/memory/sd_mmc/unit_tests/unit_tests.c
new file mode 100644
index 00000000..562ee6a5
--- /dev/null
+++ b/common2/components/memory/sd_mmc/unit_tests/unit_tests.c
@@ -0,0 +1,348 @@
+/**
+ * \file
+ *
+ * \brief SD/MMC card unit tests
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \mainpage SD/MMC Card Unit tests
+ *
+ * \section intro Introduction
+ * This is the unit test application for the SD/MMC stack.
+ * It consists of test cases for the following functionalities:
+ * - SD/MMC card initialization.
+ * - SD/MMC card read and write test.
+ * The SD/MMC stack supports all MCI/SPI interfaces from AVR and SAM devices.
+ *
+ * \note Please connect a SD/MMC card on the board before running the test.
+ * While using Xplained Pro evaluation kits, the IO1 Xplained Pro
+ * extension board should be attached to EXT1.
+ *
+ * \section Description
+ *
+ * The unit tests executes the following sequences:
+ * - Wait a card insertion on the first slot of the board
+ * - Inilialize an SD, MMC card.
+ * - If the inserted card is an SD or MMC card, test read/write access.
+ * Three modes are tested: SINGLE, MULTIPLE block, and fragmented MULTIPLE block.
+ *     - Read data from the card, save it
+ *     - Write data into the card
+ *     - Read data from the card
+ *     - Verify the written data.
+ *     - Write the data saved
+ *     - Read the data saved
+ *     - Verify the written data.
+ *
+ * The example outputs the information through the standard utput (stdio).
+ * To know the output used by the board, look in  the conf_test.h file
+ * and connect a terminal on the correct port.
+ *
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ * Support and FAQ: http://www.atmel.com/design-support/
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include <conf_test.h>
+#include "sd_mmc_protocol.h"
+
+//! \name Test configurations
+//! @{
+//! Number of blocks for multiple read or write
+#define NB_MULTI_BLOCKS     (2)
+
+//! The value used to generate test data
+#define TEST_FILL_VALUE_U32     (0x5500AAFFU)
+
+//! Buffer used to save the sector area used by read/write tests
+COMPILER_WORD_ALIGNED
+static uint8_t buf_save[SD_MMC_BLOCK_SIZE * NB_MULTI_BLOCKS];
+
+//! Buffer used by read/write tests
+COMPILER_WORD_ALIGNED
+static uint8_t buf_test[SD_MMC_BLOCK_SIZE * NB_MULTI_BLOCKS];
+
+//! Read and write test length of CIA in bytes
+#define TEST_CIA_SIZE           (0x16)
+
+//! Structure for UART module connected to EDBG (used for unit test output)
+struct usart_module cdc_uart_module;
+//! @}
+
+
+/**
+ * \brief SD/MMC card read and write test.
+ *
+ * \param test Current test case.
+ * \param nb_block Test blocks.
+ * \param split_tansfer Split transfer setting.
+ */
+static void rw_test(const struct test_case *test, uint16_t nb_block,
+		bool split_tansfer)
+{
+	uint32_t i;
+	uint32_t last_blocks_addr;
+	uint16_t nb_trans;
+
+	/* Compute the last address */
+	last_blocks_addr = sd_mmc_get_capacity(0) * (1024/SD_MMC_BLOCK_SIZE) - 50;
+	test_assert_true(test, last_blocks_addr > NB_MULTI_BLOCKS,
+			"Error: SD/MMC capacity.");
+
+	last_blocks_addr -= NB_MULTI_BLOCKS;
+	
+	/* Read (save blocks) the last blocks */
+	test_assert_true(test, SD_MMC_OK ==
+			sd_mmc_init_read_blocks(0, last_blocks_addr, nb_block),
+			"Error: SD/MMC initialize read sector(s).");
+
+	for (nb_trans = 0; nb_trans < (split_tansfer? nb_block : 1); nb_trans++) {
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_start_read_blocks(
+				&buf_save[nb_trans * SD_MMC_BLOCK_SIZE],
+				split_tansfer? 1 : nb_block),
+				"Error: SD/MMC start read sector(s).");
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_wait_end_of_read_blocks(false),
+				"Error: SD/MMC wait end of read sector(s).");
+	}
+
+	test_assert_true(test, !sd_mmc_is_write_protected(0),
+			"Error: SD/MMC is write protected.");
+
+	/* Fill buffer */
+	for (i = 0; i < (SD_MMC_BLOCK_SIZE * nb_block / sizeof(uint32_t)); i++) {
+		((uint32_t*)buf_test)[i] = TEST_FILL_VALUE_U32;
+	}
+	
+	/* Write the last blocks */
+	test_assert_true(test, SD_MMC_OK ==
+			sd_mmc_init_write_blocks(0, last_blocks_addr, nb_block),
+			"Error: SD/MMC initialize write sector(s).");
+
+	for (nb_trans = 0; nb_trans < (split_tansfer? nb_block : 1); nb_trans++) {
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_start_write_blocks(
+				&buf_test[nb_trans * SD_MMC_BLOCK_SIZE],
+				split_tansfer? 1 : nb_block),
+				"Error: SD/MMC start write sector(s).");
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_wait_end_of_write_blocks(false),
+				"Error: SD/MMC wait end of write sector(s).");
+	}
+
+	/* Clean buffer */
+	for (i = 0; i < (SD_MMC_BLOCK_SIZE * nb_block / sizeof(uint32_t)); i++) {
+		((uint32_t*)buf_test)[i] = 0xFFFFFFFF;
+	}
+
+	/* Read the last block */
+	test_assert_true(test, SD_MMC_OK ==
+			sd_mmc_init_read_blocks(0, last_blocks_addr, nb_block),
+			"Error: SD/MMC initialize read sector(s).");
+
+	for (nb_trans = 0; nb_trans < (split_tansfer? nb_block : 1); nb_trans++) {
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_start_read_blocks(
+				&buf_test[nb_trans * SD_MMC_BLOCK_SIZE],
+				split_tansfer? 1 : nb_block),
+				"Error: SD/MMC start read sector(s).");
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_wait_end_of_read_blocks(false),
+				"Error: SD/MMC wait end of read sector(s).");
+	}
+
+	/* Check buffer */
+	for (i = 0; i < (SD_MMC_BLOCK_SIZE * nb_block / sizeof(uint32_t)); i++) {
+		test_assert_true(test,
+				((uint32_t*)buf_test)[i] == TEST_FILL_VALUE_U32,
+				"Error: SD/MMC verify write operation.");
+	}
+
+	/* Write (restore) the last block */
+	test_assert_true(test, SD_MMC_OK ==
+			sd_mmc_init_write_blocks(0, last_blocks_addr, nb_block),
+			"Error: SD/MMC initialize write restore sector(s).");
+
+	for (nb_trans = 0; nb_trans < (split_tansfer? nb_block : 1); nb_trans++) {
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_start_write_blocks(
+				&buf_save[nb_trans * SD_MMC_BLOCK_SIZE],
+				split_tansfer? 1 : nb_block),
+				"Error: SD/MMC start write restore sector(s).");
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_wait_end_of_write_blocks(false),
+				"Error: SD/MMC wait end of write restore sector(s).");
+	}
+
+	/* Read (check restore) the last block */
+	test_assert_true(test, SD_MMC_OK ==
+			sd_mmc_init_read_blocks(0, last_blocks_addr, nb_block),
+			"Error: SD/MMC initialize read sector(s).");
+
+	for (nb_trans = 0; nb_trans < (split_tansfer? nb_block : 1); nb_trans++) {
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_start_read_blocks(
+				&buf_test[nb_trans * SD_MMC_BLOCK_SIZE],
+				split_tansfer? 1 : nb_block),
+				"Error: SD/MMC start read sector(s).");
+		test_assert_true(test, SD_MMC_OK ==
+				sd_mmc_wait_end_of_read_blocks(false),
+				"Error: SD/MMC wait end of read sector(s).");
+	}
+
+	/* Check buffer restored */
+	for (i = 0; i < (SD_MMC_BLOCK_SIZE * nb_block / sizeof(uint32_t)); i++) {
+		test_assert_true(test,
+				((uint32_t*)buf_test)[i] == ((uint32_t*)buf_save)[i],
+				"Error: SD/MMC verify restore operation.");
+	}
+}
+
+/**
+ * \brief SD/MMC stack initialization test.
+ *
+ * \param test Current test case.
+ */
+static void run_sd_mmc_init_test(const struct test_case *test)
+{
+	sd_mmc_err_t err;
+
+	/* Initialize SD MMC stack */
+	sd_mmc_init();
+
+	/* Wait card connection */
+	do {
+		err = sd_mmc_check(0);
+	} while (SD_MMC_ERR_NO_CARD == err);
+
+	/* Check if the first state is an initialization */
+	test_assert_true(test, err == SD_MMC_INIT_ONGOING,
+			"No card initialization phase detected.");
+
+	/* Check if the second step is an installation success */
+	test_assert_true(test, sd_mmc_check(0) == SD_MMC_OK,
+			"SD/MMC card initialization failed.");
+}
+
+/**
+ * \brief SD/MMC card read and write test.
+ *
+ * \param test Current test case.
+ */
+static void run_sd_mmc_rw_test(const struct test_case *test)
+{
+	test_assert_true(test, SD_MMC_OK == sd_mmc_check(0),
+			"SD/MMC card is not initialized OK.");
+
+	if (sd_mmc_get_type(0) & (CARD_TYPE_SD | CARD_TYPE_MMC)) {
+		rw_test(test, 1, false);
+		rw_test(test, NB_MULTI_BLOCKS, false);
+		rw_test(test, NB_MULTI_BLOCKS, true);
+	}
+}
+
+/**
+ * \brief Initialize the USART for unit test
+ *
+ * Initializes the SERCOM USART used for sending the unit test status to the
+ * computer via the EDBG CDC gateway.
+ */
+static void cdc_uart_init(void)
+{
+	struct usart_config usart_conf;
+
+	/* Configure USART for unit test output */
+	usart_get_config_defaults(&usart_conf);
+	usart_conf.mux_setting = CONF_STDIO_MUX_SETTING;
+	usart_conf.pinmux_pad0 = CONF_STDIO_PINMUX_PAD0;
+	usart_conf.pinmux_pad1 = CONF_STDIO_PINMUX_PAD1;
+	usart_conf.pinmux_pad2 = CONF_STDIO_PINMUX_PAD2;
+	usart_conf.pinmux_pad3 = CONF_STDIO_PINMUX_PAD3;
+	usart_conf.baudrate    = CONF_STDIO_BAUDRATE;
+
+	stdio_serial_init(&cdc_uart_module, CONF_STDIO_USART, &usart_conf);
+	usart_enable(&cdc_uart_module);
+}
+
+/**
+ * \brief Application entry point.
+ *
+ * \return Unused (ANSI-C compatibility).
+ */
+int main(void)
+{
+	system_init();
+	delay_init();
+	cdc_uart_init();
+
+	/* Wait stdio stable */
+	delay_ms(5);
+
+	irq_initialize_vectors();
+	cpu_irq_enable();
+
+	/* Define all the test cases */
+	DEFINE_TEST_CASE(sd_mmc_init_test, NULL, run_sd_mmc_init_test,
+			NULL, "SD/MMC card initialization test.");
+
+	DEFINE_TEST_CASE(sd_mmc_rw_test, NULL, run_sd_mmc_rw_test,
+			NULL, "SD/MMC card read and write test.");
+
+	/* Put test case addresses in an array */
+	DEFINE_TEST_ARRAY(sd_mmc_tests) = {
+		&sd_mmc_init_test,
+		&sd_mmc_rw_test
+	};
+
+	/* Define the test suite */
+	DEFINE_TEST_SUITE(sd_mmc_suite, sd_mmc_tests,
+			"SD/MMC stack test suite");
+
+	/* Run all tests in the test suite */
+	test_suite_run(&sd_mmc_suite);
+
+	while (1) {
+		/* Busy-wait forever */
+	}
+}
diff --git a/common2/components/memory/serial_flash/at25dfx/at25dfx.c b/common2/components/memory/serial_flash/at25dfx/at25dfx.c
new file mode 100644
index 00000000..f1b3dd37
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/at25dfx.c
@@ -0,0 +1,767 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx SerialFlash driver implementation.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "at25dfx.h"
+
+/** SerialFlash command opcodes */
+enum at25dfx_command_opcode {
+	AT25DFX_COMMAND_PROGRAM_PAGE         = 0x02,
+	AT25DFX_COMMAND_READ_STATUS          = 0x05,
+	AT25DFX_COMMAND_READ_ARRAY           = 0x0b,
+	AT25DFX_COMMAND_READ_DEVICE_ID       = 0x9f,
+	AT25DFX_COMMAND_WRITE_ENABLE         = 0x06,
+	AT25DFX_COMMAND_WRITE_DISABLE        = 0x04,
+	AT25DFX_COMMAND_ERASE_CHIP           = 0xc7,
+	AT25DFX_COMMAND_ERASE_BLOCK_4KB      = 0x20,
+	AT25DFX_COMMAND_ERASE_BLOCK_32KB     = 0x52,
+	AT25DFX_COMMAND_ERASE_BLOCK_64KB     = 0xd8,
+	AT25DFX_COMMAND_WRITE_STATUS         = 0x01,
+	AT25DFX_COMMAND_PROTECT_SECTOR       = 0x36,
+	AT25DFX_COMMAND_UNPROTECT_SECTOR     = 0x39,
+	AT25DFX_COMMAND_READ_PROTECT_SECTOR  = 0x3c,
+	AT25DFX_COMMAND_SLEEP                = 0xb9,
+	AT25DFX_COMMAND_WAKE                 = 0xab,
+};
+
+/** AT25DFx page size in bytes */
+#define AT25DFX_PAGE_SIZE         256
+/** Maximum length of a SerialFlash command */
+#define AT25DFX_COMMAND_MAX_SIZE  (1 + 3 + 2)
+
+/** SerialFlash status bits */
+enum at25dfx_status_field {
+	// These two are read-fields
+	AT25DFX_STATUS_BUSY            = (1 << 0),
+	AT25DFX_STATUS_ERROR           = (1 << 5),
+	// This is a write-field
+	AT25DFX_STATUS_GLOBAL_PROTECT  = (0x0f << 2),
+};
+
+/** SerialFlash command container */
+struct at25dfx_command {
+	/** Opcode to send */
+	enum at25dfx_command_opcode opcode;
+	/** Size: opcode byte (1) [+ address bytes (3)] [+ dummy bytes (N)] */
+	uint8_t command_size;
+	/** SerialFlash address to operate on */
+	at25dfx_address_t address;
+	/** Buffer to read from/write to */
+	union {
+		const uint8_t *tx;
+		uint8_t *rx;
+	} data;
+	/** Number of bytes to read/write */
+	at25dfx_datalen_t length;
+};
+
+//! \name SerialFlash chip info helpers
+//@{
+
+/**
+ * \brief Get the device ID of a specific SerialFlash type.
+ *
+ * \param[in] type Type of SerialFlash.
+ *
+ * \return SerialFlash device ID.
+ */
+static inline uint32_t _at25dfx_get_device_id(enum at25dfx_type type)
+{
+	switch (type) {
+	case AT25DFX_512B:
+		return 0x00651f;
+
+	case AT25DFX_021:
+		return 0x00431f;
+
+	case AT25DFX_041A:
+		return 0x01441f;
+
+	case AT25DFX_081:
+		return 0x02451f;
+
+	case AT25DFX_081A:
+		return 0x01451f;
+
+	case AT25DFX_161:
+		return 0x02461f;
+
+	case AT25DFX_L161:
+		return 0x03461f;
+
+	case AT25DFX_Q161:
+		return 0x00861f;
+
+	case AT25DFX_321A:
+		return 0x01471f;
+
+	case AT25DFX_641:
+		return 0x00481f;
+
+	default:
+		Assert(false);
+		return 0;
+	}
+}
+
+/**
+ * \brief Get the storage size of a specific SerialFlash type.
+ *
+ * \param[in] type Type of SerialFlash.
+ *
+ * \return SerialFlash storage size.
+ */
+static inline uint32_t _at25dfx_get_device_size(enum at25dfx_type type)
+{
+	switch (type) {
+	case AT25DFX_512B:
+		return 64 * 1024UL;
+
+	case AT25DFX_021:
+		return 256 * 1024UL;
+
+	case AT25DFX_041A:
+		return 512 * 1024UL;
+
+	case AT25DFX_081:
+	case AT25DFX_081A:
+		return 1024 * 1024UL;
+
+	case AT25DFX_161:
+	case AT25DFX_L161:
+	case AT25DFX_Q161:
+		return 2048 * 1024UL;
+
+	case AT25DFX_321A:
+		return 4096 * 1024UL;
+
+	case AT25DFX_641:
+		return 8192 * 1024UL;
+
+	default:
+		Assert(false);
+		return 0;
+	}
+}
+
+//@}
+
+//! \name Private chip helpers
+//@{
+
+/**
+ * \brief Select the chip
+ *
+ * This function selects the specified chip by driving its CS line low.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ */
+static inline void _at25dfx_chip_select(struct at25dfx_chip_module *chip)
+{
+	port_pin_set_output_level(chip->cs_pin, false);
+}
+
+/**
+ * \brief Deselect the chip
+ *
+ * This function deselects the specified chip by driving its CS line high.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ */
+static inline void _at25dfx_chip_deselect(struct at25dfx_chip_module *chip)
+{
+	port_pin_set_output_level(chip->cs_pin, true);
+}
+
+#include <at25dfx_priv_hal.h>
+
+/**
+ * \brief Issue command to enable writing
+ *
+ * This function issues the command that enables operations which change the
+ * SerialFlash content or operation, i.e., programming, erasing and protecting
+ * or unprotecting sectors.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ */
+static inline void _at25dfx_chip_enable_write(struct at25dfx_chip_module *chip)
+{
+	struct at25dfx_command cmd;
+
+	cmd.opcode = AT25DFX_COMMAND_WRITE_ENABLE;
+	cmd.command_size = 1;
+	cmd.length = 0;
+
+	// Init to avoid warnings with -Os
+	cmd.address = (at25dfx_address_t)NULL;
+	cmd.data.tx = NULL;
+
+	_at25dfx_chip_issue_write_command_wait(chip, cmd);
+}
+
+//@}
+
+/**
+ * \brief Check presence of chip
+ *
+ * This function checks whether or not the SerialFlash device is present by
+ * attempting to read out its device ID, and comparing it with the one that
+ * its type should have.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if chip responded with ID matching its type.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ * \retval STATUS_ERR_NOT_FOUND if chip did not respond, or with wrong ID.
+ */
+enum status_code at25dfx_chip_check_presence(struct at25dfx_chip_module *chip)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+	uint32_t id = 0;
+
+	Assert(chip);
+
+	// Reserve the SPI for us
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	cmd.opcode = AT25DFX_COMMAND_READ_DEVICE_ID;
+	cmd.command_size = 1;
+	cmd.data.rx = (uint8_t *)&id;
+	cmd.length = 3;
+
+	// Init to avoid warnings with -Os
+	cmd.address = (at25dfx_address_t)NULL;
+
+	_at25dfx_chip_issue_read_command_wait(chip, cmd);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	if (id == _at25dfx_get_device_id(chip->type)) {
+		return STATUS_OK;
+	} else {
+		return STATUS_ERR_NOT_FOUND;
+	}
+}
+
+/**
+ * \brief Read data from chip
+ *
+ * This function reads data from the SerialFlash device, into a buffer.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ * \param[in] address SerialFlash internal address to start reading from.
+ * \param[out] data Buffer to write data into.
+ * \param[in] length Number of bytes to read.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if operation succeeded.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ * \retval STATUS_ERR_INVALID_ARG if address and/or length is out of bounds.
+ */
+enum status_code at25dfx_chip_read_buffer(struct at25dfx_chip_module *chip,
+		at25dfx_address_t address, void *data, at25dfx_datalen_t length)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+
+	Assert(chip);
+	Assert(data);
+	Assert(length);
+
+	// Address out of range?
+	if ((address + length) > _at25dfx_get_device_size(chip->type)) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	cmd.opcode = AT25DFX_COMMAND_READ_ARRAY;
+	cmd.command_size = 5;
+	cmd.address = address;
+	cmd.data.rx = (uint8_t *)data;
+	cmd.length = length;
+	_at25dfx_chip_issue_read_command_wait(chip, cmd);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Write data to chip
+ *
+ * This function writes data to the SerialFlash device, from a buffer.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ * \param[in] address SerialFlash internal address to start writing to.
+ * \param[in] data Buffer to read data from.
+ * \param[in] length Number of bytes to write.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if operation succeeded.
+ * \retval STATUS_ERR_IO if operation failed.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ * \retval STATUS_ERR_INVALID_ARG if address and/or length is out of bounds.
+ */
+enum status_code at25dfx_chip_write_buffer(struct at25dfx_chip_module *chip,
+		at25dfx_address_t address, const void *data, at25dfx_datalen_t length)
+{
+	at25dfx_datalen_t page_bytes;
+	enum status_code status;
+	struct at25dfx_command cmd;
+
+	Assert(chip);
+	Assert(data);
+	Assert(length);
+
+	if ((address + length) > _at25dfx_get_device_size(chip->type)) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	_at25dfx_chip_enable_write(chip);
+
+	cmd.opcode = AT25DFX_COMMAND_PROGRAM_PAGE;
+	cmd.command_size = 4;
+	cmd.address = address;
+	cmd.data.tx = (uint8_t *)data;
+	page_bytes = AT25DFX_PAGE_SIZE - (address % AT25DFX_PAGE_SIZE);
+	cmd.length = min(page_bytes, length);
+	_at25dfx_chip_issue_write_command_wait(chip, cmd);
+
+	status = _at25dfx_chip_get_nonbusy_status(chip);
+
+	length -= cmd.length;
+
+	while (length && (status == STATUS_OK)) {
+		_at25dfx_chip_enable_write(chip);
+
+		cmd.address += cmd.length;
+		cmd.data.tx += cmd.length;
+		cmd.length = min(AT25DFX_PAGE_SIZE, length);
+
+		_at25dfx_chip_issue_write_command_wait(chip, cmd);
+
+		status = _at25dfx_chip_get_nonbusy_status(chip);
+
+		length -= cmd.length;
+	}
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return status;
+}
+
+/**
+ * \brief Erase chip
+ *
+ * This function erases all content of the SerialFlash device.
+ *
+ * \pre All sectors must be unprotected prior to a chip erase, or it will not be
+ * performed.
+ *
+ * \sa at25dfx_chip_set_global_sector_protect()
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if operation succeeded.
+ * \retval STATUS_ERR_IO if operation failed.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ */
+enum status_code at25dfx_chip_erase(struct at25dfx_chip_module *chip)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+
+	Assert(chip);
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	_at25dfx_chip_enable_write(chip);
+
+	cmd.opcode = AT25DFX_COMMAND_ERASE_CHIP;
+	cmd.command_size = 1;
+	cmd.length = 0;
+
+	// Init to avoid warnings with -Os
+	cmd.address = (at25dfx_address_t)NULL;
+	cmd.data.tx = NULL;
+
+	_at25dfx_chip_issue_write_command_wait(chip, cmd);
+
+	status = _at25dfx_chip_get_nonbusy_status(chip);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return status;
+}
+
+/**
+ * \brief Erase block
+ *
+ * This function erases all content within a block of the SerialFlash device.
+ *
+ * \pre The sector(s) which the block resides in must be unprotected prior to a
+ * block erase, or it will not be performed.
+ *
+ * \sa at25dfx_chip_set_sector_protect()
+ *
+ * \note The alignment of the erase blocks is given by the erase block size. The
+ * SerialFlash device will simply ignore address bits which index within the
+ * block. For example, doing a 4 kB block erase with the start address set to
+ * the 2 kB boundary will cause the first 4 kB to get erased, not 4 kB starting
+ * at the 2 kB boundary.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ * \param[in] address Address within the block to erase.
+ * \param[in] block_size Size of block to erase.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if operation succeeded.
+ * \retval STATUS_ERR_IO if operation failed.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ * \retval STATUS_ERR_INVALID_ARG if address is out of bounds.
+ */
+enum status_code at25dfx_chip_erase_block(struct at25dfx_chip_module *chip,
+		at25dfx_address_t address, enum at25dfx_block_size block_size)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+
+	Assert(chip);
+
+	if (address >= _at25dfx_get_device_size(chip->type)) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	_at25dfx_chip_enable_write(chip);
+
+	switch (block_size) {
+	case AT25DFX_BLOCK_SIZE_4KB:
+		cmd.opcode = AT25DFX_COMMAND_ERASE_BLOCK_4KB;
+		break;
+
+	case AT25DFX_BLOCK_SIZE_32KB:
+		cmd.opcode = AT25DFX_COMMAND_ERASE_BLOCK_32KB;
+		break;
+
+	case AT25DFX_BLOCK_SIZE_64KB:
+		cmd.opcode = AT25DFX_COMMAND_ERASE_BLOCK_64KB;
+		break;
+
+	default:
+		Assert(false);
+		cmd.opcode = (enum at25dfx_command_opcode)0;
+	}
+	cmd.command_size = 4;
+	cmd.address = address;
+	cmd.length = 0;
+
+	// Init to avoid warnings with -Os
+	cmd.data.tx = NULL;
+
+	_at25dfx_chip_issue_write_command_wait(chip, cmd);
+
+	status = _at25dfx_chip_get_nonbusy_status(chip);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return status;
+}
+
+/**
+ * \brief Set sector protection globally
+ *
+ * This function applies a protect setting to all sectors.
+ *
+ * \note Global setting of sector protection is done by writing to the status
+ * register of the device.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ * \param[in] bool Protection setting to apply.
+ * \arg \c true if the sectors should be protected.
+ * \arg \c false if the sectors should be unprotected.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if write operation succeeded.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ */
+enum status_code at25dfx_chip_set_global_sector_protect(
+		struct at25dfx_chip_module *chip, bool protect)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+	uint8_t temp_data;
+
+	Assert(chip);
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	_at25dfx_chip_enable_write(chip);
+
+	temp_data = protect ? AT25DFX_STATUS_GLOBAL_PROTECT : 0;
+	cmd.opcode = AT25DFX_COMMAND_WRITE_STATUS;
+	cmd.command_size = 1;
+	cmd.length = 1;
+	cmd.data.tx = &temp_data;
+
+	// Init to avoid warnings with -Os
+	cmd.address = (at25dfx_address_t)NULL;
+
+	_at25dfx_chip_issue_write_command_wait(chip, cmd);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Set protection setting of a single sector
+ *
+ * This function applies a protect setting to a single sector.
+ *
+ * \note The granularity of the sectors for protection can vary between
+ * SerialFlash devices and is not necessarily uniform. Please refer to the
+ * datasheet for details.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ * \param[in] address Address within sector to protect.
+ * \param[in] bool Protection setting to apply.
+ * \arg \c true if the sector should be protected.
+ * \arg \c false if the sector should be unprotected.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if write operation succeeded.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ * \retval STATUS_ERR_INVALID_ARG if address is out of bounds.
+ */
+enum status_code at25dfx_chip_set_sector_protect(
+		struct at25dfx_chip_module *chip, at25dfx_address_t address,
+		bool protect)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+
+	Assert(chip);
+
+	if ((address) >= _at25dfx_get_device_size(chip->type)) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	_at25dfx_chip_enable_write(chip);
+
+	cmd.opcode = protect ?
+			AT25DFX_COMMAND_PROTECT_SECTOR : AT25DFX_COMMAND_UNPROTECT_SECTOR;
+	cmd.command_size = 4;
+	cmd.address = address;
+	cmd.length = 0;
+
+	// Init to avoid warnings with -Os
+	cmd.data.tx = NULL;
+
+	_at25dfx_chip_issue_write_command_wait(chip, cmd);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Get protection setting of a single sector
+ *
+ * This function gets the protect setting of a single sector.
+ *
+ * \sa at25dfx_chip_set_sector_protect()
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ * \param[in] address Address within sector to get setting of.
+ * \param[out] bool Address of variable to store the setting to.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if operation succeeded.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ * \retval STATUS_ERR_INVALID_ARG if address is out of bounds.
+ */
+enum status_code at25dfx_chip_get_sector_protect(
+		struct at25dfx_chip_module *chip, at25dfx_address_t address,
+		bool *protect)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+
+	Assert(chip);
+
+	if ((address) >= _at25dfx_get_device_size(chip->type)) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	cmd.opcode = AT25DFX_COMMAND_READ_PROTECT_SECTOR;
+	cmd.command_size = 4;
+	cmd.address = address;
+	cmd.length = 1;
+	cmd.data.rx = (uint8_t *)protect;
+	_at25dfx_chip_issue_read_command_wait(chip, cmd);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Put device to sleep
+ *
+ * This function puts the SerialFlash device to sleep for the purpose of
+ * reducing power consumption while the device is not needed.
+ *
+ * \sa at25dfx_chip_wake()
+ *
+ * \note The device will not respond to any commands until it is woken up.
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if write operation succeeded.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ */
+enum status_code at25dfx_chip_sleep(struct at25dfx_chip_module *chip)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+
+	Assert(chip);
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	cmd.opcode = AT25DFX_COMMAND_SLEEP;
+	cmd.command_size = 1;
+	cmd.length = 0;
+
+	// Init to avoid warnings with -Os
+	cmd.address = (at25dfx_address_t)NULL;
+	cmd.data.tx = NULL;
+
+	_at25dfx_chip_issue_write_command_wait(chip, cmd);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Wake device from sleep
+ *
+ * This function wakes the SerialFlash device from sleep.
+ *
+ * \sa at25dfx_chip_sleep()
+ *
+ * \param[in] chip Address of SerialFlash chip instance to operate on.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK if write operation succeeded.
+ * \retval STATUS_BUSY if SPI is busy with some other operation.
+ */
+enum status_code at25dfx_chip_wake(struct at25dfx_chip_module *chip)
+{
+	enum status_code status;
+	struct at25dfx_command cmd;
+
+	Assert(chip);
+
+	status = _at25dfx_spi_lock(chip->spi);
+	if (status == STATUS_BUSY) {
+		return status;
+	}
+
+	cmd.opcode = AT25DFX_COMMAND_WAKE;
+	cmd.command_size = 1;
+	cmd.length = 0;
+
+	// Init to avoid warnings with -Os
+	cmd.address = (at25dfx_address_t)NULL;
+	cmd.data.tx = NULL;
+
+	_at25dfx_chip_issue_write_command_wait(chip, cmd);
+
+	_at25dfx_spi_unlock(chip->spi);
+
+	return STATUS_OK;
+}
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/at25dfx.h b/common2/components/memory/serial_flash/at25dfx/at25dfx.h
new file mode 100644
index 00000000..db919ee2
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/at25dfx.h
@@ -0,0 +1,435 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx SerialFlash driver interface.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef AT25DFX_H
+#define AT25DFX_H
+
+/**
+ * \defgroup asfdoc_common2_at25dfx_group AT25DFx SerialFlash Driver
+ *
+ * This driver provides an interface for basic usage of SerialFlash devices,
+ * i.e., read/write, global and local protect/unprotect of sectors, and
+ * sleep/wake.
+ *
+ * It supports multiple instances, and the instances can be connected to either
+ * common or individual SPI interfaces. For a list of the supported SerialFlash
+ * types, see \ref at25dfx_type.
+ *
+ * The following peripherals are used by this module:
+ * - \ref SERCOM SPI (data transfer)
+ * - \ref PORT (chip selection)
+ *
+ * The outline of this documentation is as follows:
+ * - \ref asfdoc_common2_at25dfx_prerequisites
+ * - \ref asfdoc_common2_at25dfx_module_overview
+ * - \ref asfdoc_common2_at25dfx_special_considerations
+ * - \ref asfdoc_common2_at25dfx_extra_info
+ * - \ref asfdoc_common2_at25dfx_examples
+ * - \ref asfdoc_common2_at25dfx_api_overview
+ *
+ *
+ * \section asfdoc_common2_at25dfx_prerequisites Prerequisites
+ *
+ * This driver requires that the SPI drivers are instantiated, initialized and
+ * enabled by the user, and that the SPI instances are persistent for as long as
+ * the associated instances of this driver exist or are used. To ensure
+ * persistence of the SPI instances, the convention is to define them in the
+ * same scope as the instances of this driver, which is usually a global one.
+ *
+ * The hardware abstraction layer (HAL) of this driver supports several SPI
+ * driver implementations, but not at the same time. So for a given project, one
+ * must select which implementation to support, and use it for all instances.
+ * The reader is assumed to be familiar with how to configure and initialize the
+ * SPI drivers, but the basic configuration to use is supplied by this driver's
+ * HAL:
+ * - \ref at25dfx_spi_get_config_defaults() for polled SERCOM SPI
+ * - \ref at25dfx_spi_master_vec_get_config_defaults() for SERCOM SPI Master
+ *    with Vectored I/O
+ *
+ * To ensure correct operation, the user should not change anything in the base
+ * configuration except the baud rate, the SERCOM MUX and the pin MUX settings.
+ *
+ *
+ * \section asfdoc_common2_at25dfx_module_overview Module Overview
+ *
+ * This driver enables the user to do basic operations on SerialFlash devices in
+ * the AT25DFx series, such as checking their presence, reading from and writing
+ * to them, putting them to sleep and waking them back up when needed. Basic
+ * security is implemented, i.e., sector protection to prevent accidental erase
+ * and write. Functionality for permanently locking and securing AT25DFx devices
+ * is not implemented in this driver.
+ *
+ * Each instance of this driver corresponds to a single AT25DFx device, and must
+ * be associated with an instance of the SPI driver supported by the selected
+ * HAL implementation, as well as a PORT pin for chip select (CS).
+ *
+ * All functions of this driver are blocking, which means that they do not
+ * return until the initiated operation completes. Further, since the selected
+ * HAL might use an interrupt-driven driver, this driver should not be used
+ * within interrupts.
+ *
+ *
+ * \subsection asfdoc_common2_at25dfx_module_spi_share SPI Bus Sharing
+ *
+ * SerialFlash devices can share a SPI bus, due to the use of CS lines. SPI bus
+ * sharing is supported by this driver without any special configuration. To
+ * share a SPI bus, simply associate the same SPI driver instance to multiple
+ * instances of this driver.
+ *
+ * The \ref asfdoc_sam0_at25dfx_example "figure below" illustrates an example
+ * where two out of three instances of this driver are associated with the same
+ * SPI driver instance.
+ *
+ * \anchor asfdoc_sam0_at25dfx_example
+ * \image html at25dfx.png "AT25DFx and SPI instance sharing."
+ *
+ *
+ * \subsection asfdoc_common2_at25dfx_module_threads Use in Threaded Environments
+ *
+ * The functions of this driver rely on the locking mechanism in the SPI drivers
+ * to ensure exclusive access to a SPI driver instance for the entire duration
+ * of an operation, such as writing data to the AT25DFx device. They will not
+ * wait for an already locked instance to be unlocked. Instead, they will simply
+ * return a status code indicating that it was busy.
+ *
+ * This behavior means that the functions are thread safe in the sense that no
+ * two operations may interfere with each other. It also means that there is no
+ * queueing of operations. Assuming the illustration above was a multi-threaded
+ * application, it would have to wait for an operation on AT25DFx instance #2 to
+ * end before one could be initiated on instance #3, and vice versa. If queueing
+ * of operations is needed, it must be implemented as a layer on top of this
+ * driver.
+ *
+ * Be aware that the protocol implementation in this driver is not interrupt-
+ * driven, and the HAL may use a polled driver. Hence, an on-going operation may
+ * be temporarily paused if the MCU switches threads.
+ *
+ *
+ * \section asfdoc_common2_at25dfx_special_considerations Special Considerations
+ *
+ * \subsection asfdoc_common2_at25dfx_special_dev Device Specifics
+ *
+ * The available erase block sizes, and the availability and granularity of
+ * protection sectors may differ between devices.
+ *
+ * For example, with AT25F512B (\ref AT25DFX_512B), issuing a 64 kB block erase
+ * command will cause a 32 kB erase, and it does not support setting protection
+ * on individual sectors, only globally.
+ *
+ * Refer to the SerialFlash device's datasheet for details about which
+ * operations are supported and what limitations apply to them.
+ *
+ *
+ * \subsection asfdoc_common2_at25dfx_special_flash Flash Memory Behavior
+ *
+ * The reader should be aware of some details of how flash memory generally
+ * functions:
+ * -# Erasing a flash memory block means that all bits in the block are reset to
+ *    a high level (logical "1"), i.e., all bytes will read as \c 0xFF.
+ * -# Writing to a flash memory location will only set relevant bits to a low
+ *    level (logical "0"), never to a high level.
+ * -# It is possible to write several times to a flash memory block without
+ *    erasing, but there may be limitations on the number of times it can be
+ *    done.
+ *
+ *
+ * \section asfdoc_common2_at25dfx_extra_info Extra Information
+ *
+ * For extra information, see
+ * \subpage asfdoc_common2_at25dfx_extra. This includes:
+ * - \ref asfdoc_common2_at25dfx_extra_acronyms
+ * - \ref asfdoc_common2_at25dfx_extra_dependencies
+ * - \ref asfdoc_common2_at25dfx_extra_errata
+ * - \ref asfdoc_common2_at25dfx_extra_history
+ *
+ * \section asfdoc_common2_at25dfx_examples Examples
+ *
+ * For a list of examples related to this driver, see
+ * \subpage asfdoc_common2_at25dfx_exqsg.
+ *
+ * \section asfdoc_common2_at25dfx_api_overview API Overview
+ *
+ * @{
+ */
+
+#include <compiler.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** SerialFlash type. */
+enum at25dfx_type {
+	/** AT25F512B, compatible with AT25BCM512B */
+	AT25DFX_512B,
+	/** AT25DF021 */
+	AT25DFX_021,
+	/** AT25DF041A */
+	AT25DFX_041A,
+	/** AT25DF081, compatible with AT25DL081 */
+	AT25DFX_081,
+	/** AT25DF081A, compatible with AT26DF081A */
+	AT25DFX_081A,
+	/** AT25DF161 */
+	AT25DFX_161,
+	/** AT25DL161 */
+	AT25DFX_L161,
+	/** AT25DQ161 */
+	AT25DFX_Q161,
+	/** AT25DF321A */
+	AT25DFX_321A,
+	/** AT25DF641, compatible with AT25DF641A */
+	AT25DFX_641,
+};
+
+#include <at25dfx_hal.h>
+
+/** Size of block to erase. */
+enum at25dfx_block_size {
+	/** 4 kiloByte block size. */
+	AT25DFX_BLOCK_SIZE_4KB,
+	/** 32 kiloByte block size. */
+	AT25DFX_BLOCK_SIZE_32KB,
+	/** 64 kiloByte block size. */
+	AT25DFX_BLOCK_SIZE_64KB,
+};
+
+/** SerialFlash internal address. */
+typedef uint32_t at25dfx_address_t;
+
+/** Length of data package to read/write. */
+typedef uint16_t at25dfx_datalen_t;
+
+/** SerialFlash chip driver instance. */
+struct at25dfx_chip_module {
+#if !defined(__DOXYGEN__)
+	/** SPI module to use. */
+	at25dfx_spi_module_t *spi;
+	/** Type of SerialFlash */
+	enum at25dfx_type type;
+	/** Chip Select (CS) pin. */
+	uint8_t cs_pin;
+#endif
+};
+
+/** SerialFlash chip configuration. */
+struct at25dfx_chip_config {
+	/** Type of SerialFlash */
+	enum at25dfx_type type;
+	/** Chip Select (CS) pin. */
+	uint8_t cs_pin;
+};
+
+//! \name Initialization
+//@{
+
+/**
+ * \brief Initialize chip driver instance.
+ *
+ * This function initializes a chip instance and associates it with a specified
+ * SPI instance.
+ *
+ * \param[out] module Pointer to the chip instance to initialize.
+ * \param[in] spi_module Pointer to the SPI instance to associate with.
+ * \param[in] config Pointer to the configuration for the chip.
+ */
+static inline enum status_code at25dfx_chip_init(
+		struct at25dfx_chip_module *const module,
+		at25dfx_spi_module_t *const spi_module,
+		const struct at25dfx_chip_config *const config)
+{
+	struct port_config port_config;
+
+	module->type = config->type;
+	module->cs_pin = config->cs_pin;
+	module->spi = spi_module;
+
+	// Configure CS pin as output, high
+	port_get_config_defaults(&port_config);
+	port_config.direction = PORT_PIN_DIR_OUTPUT;
+	port_pin_set_config(module->cs_pin, &port_config);
+	port_pin_set_output_level(module->cs_pin, true);
+
+	return STATUS_OK;
+}
+
+//@}
+
+//! \name Presence
+//@{
+enum status_code at25dfx_chip_check_presence(struct at25dfx_chip_module *chip);
+//@}
+
+//! \name Read/Write
+//@{
+enum status_code at25dfx_chip_read_buffer(struct at25dfx_chip_module *chip,
+		at25dfx_address_t address, void *data, at25dfx_datalen_t length);
+enum status_code at25dfx_chip_write_buffer(struct at25dfx_chip_module *chip,
+		at25dfx_address_t address, const void *data, at25dfx_datalen_t length);
+//@}
+
+//! \name Erase
+//@{
+enum status_code at25dfx_chip_erase(struct at25dfx_chip_module *chip);
+enum status_code at25dfx_chip_erase_block(struct at25dfx_chip_module *chip,
+		at25dfx_address_t address, enum at25dfx_block_size block_size);
+//@}
+
+//! \name Sector Protect
+//@{
+enum status_code at25dfx_chip_set_global_sector_protect(
+		struct at25dfx_chip_module *chip, bool protect);
+enum status_code at25dfx_chip_set_sector_protect(
+		struct at25dfx_chip_module *chip, at25dfx_address_t address,
+		bool protect);
+enum status_code at25dfx_chip_get_sector_protect(
+		struct at25dfx_chip_module *chip, at25dfx_address_t address,
+		bool *protect);
+//@}
+
+//! \name Sleep/Wake
+//@{
+enum status_code at25dfx_chip_sleep(struct at25dfx_chip_module *chip);
+enum status_code at25dfx_chip_wake(struct at25dfx_chip_module *chip);
+//@}
+
+/** @} */
+
+/**
+ * \page asfdoc_common2_at25dfx_extra Extra Information for AT25DFx SerialFlash Driver
+ *
+ *
+ * \section asfdoc_common2_at25dfx_extra_acronyms Acronyms
+ *
+ * The table below presents the acronyms used in this module.
+ *
+ * <table>
+ *   <tr>
+ *     <th>Acronym</td>
+ *     <th>Description</td>
+ *   </tr>
+ *   <tr>
+ *     <td>CS</td>
+ *     <td>Chip Select</td>
+ *   </tr>
+ *   <tr>
+ *     <td>HAL</td>
+ *     <td>Hardware Abstraction Layer</td>
+ *   </tr>
+ *   <tr>
+ *     <td>SPI</td>
+ *     <td>Serial Peripheral Interface</td>
+ *   </tr>
+ * </table>
+ *
+ *
+ * \section asfdoc_common2_at25dfx_extra_dependencies Dependencies
+ *
+ * This driver has the following dependencies:
+ * - \ref asfdoc_sam0_sercom_spi_group "SERCOM SPI driver" (depending on
+ *    selected HAL)
+ * - \ref asfdoc_sam0_sercom_spi_master_vec_group "SERCOM SPI master driver w/ vectored I/O"
+ *    (depending on selected HAL)
+ * - \ref asfdoc_sam0_port_group "PORT driver"
+ * - \ref group_sam0_utils "Compiler driver"
+ *
+ *
+ * \section asfdoc_common2_at25dfx_extra_errata Errata
+ *
+ * There are no errata related to this driver.
+ *
+ *
+ * \section asfdoc_common2_at25dfx_extra_history Module History
+ *
+ * An overview of the module history is presented in the table below, with
+ * details on the enhancements and fixes made to the module since its first
+ * release. The current version of this corresponds to the newest version in the
+ * table.
+ *
+ * <table>
+ *   <tr>
+ *     <th>Changelog</th>
+ *   </tr>
+ *   <tr>
+ *     <td>Initial Release</td>
+ *   </tr>
+ * </table>
+ */
+
+/**
+ * \page asfdoc_common2_at25dfx_exqsg Examples for AT25DFx SerialFlash Driver
+ *
+ * This is a list of the available Quick Start guides (QSGs) and example
+ * applications for \ref asfdoc_common2_at25dfx_group. QSGs are
+ * simple examples with step-by-step instructions to configure and use this
+ * driver in a selection of use cases. Note that QSGs can be compiled as a
+ * standalone application or be added to the user application.
+ *
+ * - \subpage asfdoc_common2_at25dfx_basic_use
+ */
+
+/**
+ * \page asfdoc_common2_at25dfx_document_revision_history Document Revision History
+ *
+ * <table>
+ * <tr>
+ * <th>Doc. Rev.</td>
+ * <th>Date</td>
+ * <th>Comments</td>
+ * </tr>
+ * <tr>
+ * <td>A</td>
+ * <td>01/2014</td>
+ * <td>Initial release</td>
+ * </tr>
+ * </table>
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // AT25DFX_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/docimg/at25dfx.png b/common2/components/memory/serial_flash/at25dfx/docimg/at25dfx.png
new file mode 100644
index 00000000..62d81b1f
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/docimg/at25dfx.png
diff --git a/common2/components/memory/serial_flash/at25dfx/docimg/at25dfx.svg b/common2/components/memory/serial_flash/at25dfx/docimg/at25dfx.svg
new file mode 100644
index 00000000..d1949837
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/docimg/at25dfx.svg
@@ -0,0 +1,143 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd">
+<svg width="25cm" height="20cm" viewBox="-44 -162 485 399" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+  <g>
+    <rect style="fill: #d9e4ff" x="0" y="-160" width="100" height="60"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="0" y="-160" width="100" height="60"/>
+    <text font-size="12.7998" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="50" y="-133.2">
+      <tspan x="50" y="-133.2">AT25DFx</tspan>
+      <tspan x="50" y="-117.2">instance #1</tspan>
+    </text>
+  </g>
+  <g>
+    <rect style="fill: #d9e4ff" x="158.425" y="-160" width="103.15" height="60"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="158.425" y="-160" width="103.15" height="60"/>
+    <text font-size="12.7998" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="210" y="-133.2">
+      <tspan x="210" y="-133.2">AT25DFx</tspan>
+      <tspan x="210" y="-117.2">instance #2</tspan>
+    </text>
+  </g>
+  <g>
+    <rect style="fill: #d9e4ff" x="320" y="-160" width="103.15" height="60"/>
+    <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="320" y="-160" width="103.15" height="60"/>
+    <text font-size="12.7998" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="371.575" y="-133.2">
+      <tspan x="371.575" y="-133.2">AT25DFx</tspan>
+      <tspan x="371.575" y="-117.2">instance #3</tspan>
+    </text>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="50.0439" y1="-89.2874" x2="50.1286" y2="-10.7126"/>
+    <polygon style="fill: #000000" points="50.0358,-96.7874 55.0466,-86.7928 50.0439,-89.2874 45.0466,-86.782 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="50.0358,-96.7874 55.0466,-86.7928 50.0439,-89.2874 45.0466,-86.782 "/>
+    <polygon style="fill: #000000" points="50.1367,-3.21263 45.126,-13.2072 50.1286,-10.7126 55.1259,-13.218 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="50.1367,-3.21263 45.126,-13.2072 50.1286,-10.7126 55.1259,-13.218 "/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="230.125" y1="-90.3413" x2="271.068" y2="-9.65873"/>
+    <polygon style="fill: #000000" points="226.731,-97.0294 235.715,-90.3745 230.125,-90.3413 226.798,-85.8493 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="226.731,-97.0294 235.715,-90.3745 230.125,-90.3413 226.798,-85.8493 "/>
+    <polygon style="fill: #000000" points="274.462,-2.97058 265.478,-9.62549 271.068,-9.65873 274.395,-14.1507 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="274.462,-2.97058 265.478,-9.62549 271.068,-9.65873 274.395,-14.1507 "/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="351.642" y1="-90.3236" x2="311.126" y2="-9.67643"/>
+    <polygon style="fill: #000000" points="355.009,-97.0254 354.988,-85.845 351.642,-90.3236 346.052,-90.3342 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="355.009,-97.0254 354.988,-85.845 351.642,-90.3236 346.052,-90.3342 "/>
+    <polygon style="fill: #000000" points="307.759,-2.97465 307.78,-14.155 311.126,-9.67643 316.716,-9.66576 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="307.759,-2.97465 307.78,-14.155 311.126,-9.67643 316.716,-9.66576 "/>
+  </g>
+  <g>
+    <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="50.1308" y1="70.6618" x2="50.05" y2="149.279"/>
+    <polygon style="fill: #000000" points="50.1385,63.1618 55.1282,73.167 50.1308,70.6618 45.1282,73.1567 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="50.1385,63.1618 55.1282,73.167 50.1308,70.6618 45.1282,73.1567 "/>
+    <polygon style="fill: #000000" points="50.0423,156.779 45.0526,146.773 50.05,149.279 55.0526,146.784 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="50.0423,156.779 45.0526,146.773 50.05,149.279 55.0526,146.784 "/>
+  </g>
+  <g>
+    <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="291.193,70.7436 291.193,110 210,110 210,149.256 "/>
+    <polygon style="fill: #000000" points="291.193,63.2436 296.193,73.2436 291.193,70.7436 286.193,73.2436 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="291.193,63.2436 296.193,73.2436 291.193,70.7436 286.193,73.2436 "/>
+    <polygon style="fill: #000000" points="210,156.756 205,146.756 210,149.256 215,146.756 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="210,156.756 205,146.756 210,149.256 215,146.756 "/>
+  </g>
+  <g>
+    <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="291.193,70.7436 291.193,110 371.575,110 371.575,149.256 "/>
+    <polygon style="fill: #000000" points="291.193,63.2436 296.193,73.2436 291.193,70.7436 286.193,73.2436 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="291.193,63.2436 296.193,73.2436 291.193,70.7436 286.193,73.2436 "/>
+    <polygon style="fill: #000000" points="371.575,156.756 366.575,146.756 371.575,149.256 376.575,146.756 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="371.575,156.756 366.575,146.756 371.575,149.256 376.575,146.756 "/>
+  </g>
+  <text font-size="12.7998" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="-44" y="119.569">
+    <tspan x="-44" y="119.569">CS</tspan>
+  </text>
+  <text font-size="12.7998" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="116" y="119.569">
+    <tspan x="116" y="119.569">CS</tspan>
+  </text>
+  <text font-size="12.7998" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="416" y="119.569">
+    <tspan x="416" y="119.569">CS</tspan>
+  </text>
+  <text font-size="12.7998" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="24" y="100">
+    <tspan x="24" y="100">SPI</tspan>
+  </text>
+  <text font-size="12.7998" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="264" y="100">
+    <tspan x="264" y="100">SPI</tspan>
+  </text>
+  <g>
+    <polygon style="fill: #eef3ff" points="10.8181,0 111.365,0 89.527,60 -11.0201,60 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="10.8181,0 111.365,0 89.527,60 -11.0201,60 "/>
+    <text font-size="12.7998" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="50.1726" y="26.8">
+      <tspan x="50.1726" y="26.8">SPI</tspan>
+      <tspan x="50.1726" y="42.8">instance #1</tspan>
+    </text>
+  </g>
+  <g>
+    <polygon style="fill: #eef3ff" points="251.838,0 352.385,0 330.547,60 230,60 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="251.838,0 352.385,0 330.547,60 230,60 "/>
+    <text font-size="12.7998" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="291.193" y="26.8">
+      <tspan x="291.193" y="26.8">SPI</tspan>
+      <tspan x="291.193" y="42.8">instance #2</tspan>
+    </text>
+  </g>
+  <g>
+    <path style="fill: #f3f3f3" d="M 0 172.667 C 20,163.167 30,160 50,160 C 70,160 80,163.167 100,172.667 L 100,223.333 C 80,232.833 70,236 50,236 C 30,236 20,232.833 0,223.333 L 0,172.667z"/>
+    <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 0 172.667 C 20,163.167 30,160 50,160 C 70,160 80,163.167 100,172.667 L 100,223.333 C 80,232.833 70,236 50,236 C 30,236 20,232.833 0,223.333 L 0,172.667"/>
+    <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 0 172.667 C 20,182.167 30,185.333 50,185.333 C 70,185.333 80,182.167 100,172.667"/>
+    <text font-size="12.7998" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="50" y="201.333">
+      <tspan x="50" y="201.333">AT25DFx</tspan>
+      <tspan x="50" y="217.333">chip #1</tspan>
+    </text>
+  </g>
+  <g>
+    <path style="fill: #f3f3f3" d="M 160 172.667 C 180,163.167 190,160 210,160 C 230,160 240,163.167 260,172.667 L 260,223.333 C 240,232.833 230,236 210,236 C 190,236 180,232.833 160,223.333 L 160,172.667z"/>
+    <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 160 172.667 C 180,163.167 190,160 210,160 C 230,160 240,163.167 260,172.667 L 260,223.333 C 240,232.833 230,236 210,236 C 190,236 180,232.833 160,223.333 L 160,172.667"/>
+    <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 160 172.667 C 180,182.167 190,185.333 210,185.333 C 230,185.333 240,182.167 260,172.667"/>
+    <text font-size="12.7998" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="210" y="201.333">
+      <tspan x="210" y="201.333">AT25DFx</tspan>
+      <tspan x="210" y="217.333">chip #2</tspan>
+    </text>
+  </g>
+  <g>
+    <path style="fill: #f3f3f3" d="M 320 172.667 C 340,163.167 350,160 370,160 C 390,160 400,163.167 420,172.667 L 420,223.333 C 400,232.833 390,236 370,236 C 350,236 340,232.833 320,223.333 L 320,172.667z"/>
+    <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 320 172.667 C 340,163.167 350,160 370,160 C 390,160 400,163.167 420,172.667 L 420,223.333 C 400,232.833 390,236 370,236 C 350,236 340,232.833 320,223.333 L 320,172.667"/>
+    <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 320 172.667 C 340,182.167 350,185.333 370,185.333 C 390,185.333 400,182.167 420,172.667"/>
+    <text font-size="12.7998" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="370" y="201.333">
+      <tspan x="370" y="201.333">AT25DFx</tspan>
+      <tspan x="370" y="217.333">chip #3</tspan>
+    </text>
+  </g>
+  <g>
+    <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-1.00464,-130 -20,-130 -20,207.5 -9.73607,207.5 "/>
+    <polygon style="fill: #000000" points="-2.23607,207.5 -12.2361,212.5 -9.73607,207.5 -12.2361,202.5 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-2.23607,207.5 -12.2361,212.5 -9.73607,207.5 -12.2361,202.5 "/>
+  </g>
+  <g>
+    <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="158.425,-130 140,-130 140,207.5 150.264,207.5 "/>
+    <polygon style="fill: #000000" points="157.764,207.5 147.764,212.5 150.264,207.5 147.764,202.5 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="157.764,207.5 147.764,212.5 150.264,207.5 147.764,202.5 "/>
+  </g>
+  <g>
+    <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="423.15,-130 440,-130 440,207.5 429.736,207.5 "/>
+    <polygon style="fill: #000000" points="422.236,207.5 432.236,202.5 429.736,207.5 432.236,212.5 "/>
+    <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="422.236,207.5 432.236,202.5 429.736,207.5 432.236,212.5 "/>
+  </g>
+</svg>
diff --git a/common2/components/memory/serial_flash/at25dfx/hal/spi_master_vec/at25dfx_hal.h b/common2/components/memory/serial_flash/at25dfx/hal/spi_master_vec/at25dfx_hal.h
new file mode 100644
index 00000000..a7191607
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/hal/spi_master_vec/at25dfx_hal.h
@@ -0,0 +1,88 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx SerialFlash driver public SPI HAL interface.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef AT25DFX_HAL_H
+#define AT25DFX_HAL_H
+
+#include <spi_master_vec.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_at25dfx_group
+ *
+ * @{
+ */
+
+/** Typedef for SPI HAL */
+typedef struct spi_master_vec_module at25dfx_spi_module_t;
+
+/**
+ * \brief Initialize SPI configuration
+ *
+ * This function initializes the SPI configuration struct with default settings
+ * that should work with SerialFlash devices.
+ *
+ * The user can change the baud rate and the MUX settings for SERCOM and GPIO
+ * pads, but should leave all other settings intact.
+ *
+ * \param[out] config Address of config struct to initialize.
+ */
+static inline void at25dfx_spi_master_vec_get_config_defaults(
+		struct spi_master_vec_config *const config)
+{
+	spi_master_vec_get_config_defaults(config);
+}
+
+/** @ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // AT25DFX_HAL_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/hal/spi_master_vec/at25dfx_priv_hal.h b/common2/components/memory/serial_flash/at25dfx/hal/spi_master_vec/at25dfx_priv_hal.h
new file mode 100644
index 00000000..65fc52e6
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/hal/spi_master_vec/at25dfx_priv_hal.h
@@ -0,0 +1,224 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx SerialFlash driver private SPI HAL interface.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef AT25DFX_PRIV_HAL_H
+#define AT25DFX_PRIV_HAL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//! \name Private SPI helpers
+//@{
+
+/** Alias for SPI lock function */
+#define _at25dfx_spi_lock    spi_master_vec_lock
+/** Alias for SPI unlock function */
+#define _at25dfx_spi_unlock  spi_master_vec_unlock
+
+/**
+ * \brief Issue a read command
+ *
+ * \param chip Address of SerialFlash chip instance to operate on.
+ * \param cmd The command to issue.
+ */
+static inline void _at25dfx_chip_issue_read_command_wait(
+		struct at25dfx_chip_module *chip, struct at25dfx_command cmd)
+{
+	struct spi_master_vec_bufdesc vectors[2];
+
+	enum status_code status;
+	uint8_t cmd_buffer[AT25DFX_COMMAND_MAX_SIZE];
+
+	Assert((cmd.command_size) && (cmd.command_size <= AT25DFX_COMMAND_MAX_SIZE));
+
+	// Construct command to send
+	cmd_buffer[0] = cmd.opcode;
+
+	if (cmd.command_size > 1) {
+		Assert(cmd.command_size >= 4);
+
+		cmd_buffer[3] = cmd.address & 0xff;
+		cmd_buffer[2] = (cmd.address >> 8) & 0xff;
+		cmd_buffer[1] = (cmd.address >> 16) & 0xff;
+	}
+	// Don't bother with init of dummy bytes
+
+	// Issue command, then start read
+	_at25dfx_chip_select(chip);
+
+	vectors[0].data = cmd_buffer;
+	vectors[0].length = cmd.command_size;
+	vectors[1].length = 0;
+
+	status = spi_master_vec_transceive_buffer_job(chip->spi, vectors, NULL);
+	Assert(status == STATUS_OK);
+	status = spi_master_vec_get_job_status_wait(chip->spi);
+	Assert(status == STATUS_OK);
+
+	if (cmd.length) {
+		vectors[0].data = cmd.data.rx;
+		vectors[0].length = cmd.length;
+
+		status = spi_master_vec_transceive_buffer_job(chip->spi, NULL, vectors);
+		Assert(status == STATUS_OK);
+		status = spi_master_vec_get_job_status_wait(chip->spi);
+		Assert(status == STATUS_OK);
+	}
+
+	_at25dfx_chip_deselect(chip);
+}
+
+/**
+ * \brief Issue a read command
+ *
+ * \param chip Address of SerialFlash chip instance to operate on.
+ * \param cmd The command to issue.
+ */
+static inline void _at25dfx_chip_issue_write_command_wait(
+		struct at25dfx_chip_module *chip, struct at25dfx_command cmd)
+{
+	struct spi_master_vec_bufdesc vectors[2];
+
+	enum status_code status;
+	uint8_t cmd_buffer[AT25DFX_COMMAND_MAX_SIZE];
+
+	Assert((cmd.command_size) && (cmd.command_size <= AT25DFX_COMMAND_MAX_SIZE));
+
+	cmd_buffer[0] = cmd.opcode;
+
+	if (cmd.command_size > 1) {
+		Assert(cmd.command_size >= 4);
+
+		cmd_buffer[3] = cmd.address & 0xff;
+		cmd_buffer[2] = (cmd.address >> 8) & 0xff;
+		cmd_buffer[1] = (cmd.address >> 16) & 0xff;
+	}
+
+	_at25dfx_chip_select(chip);
+
+	vectors[0].data = cmd_buffer;
+	vectors[0].length = cmd.command_size;
+	vectors[1].length = 0;
+
+	status = spi_master_vec_transceive_buffer_job(chip->spi, vectors, NULL);
+	Assert(status == STATUS_OK);
+	status = spi_master_vec_get_job_status_wait(chip->spi);
+	Assert(status == STATUS_OK);
+
+	if (cmd.length) {
+		// Cast away const to avoid compiler warning
+		vectors[0].data = (uint8_t *)cmd.data.tx;
+		vectors[0].length = cmd.length;
+
+		status = spi_master_vec_transceive_buffer_job(chip->spi, vectors, NULL);
+		Assert(status == STATUS_OK);
+		status = spi_master_vec_get_job_status_wait(chip->spi);
+		Assert(status == STATUS_OK);
+	}
+
+	_at25dfx_chip_deselect(chip);
+}
+
+/**
+ * \brief Get status after current operation completes
+ *
+ * This function will issue a command to read out the status, and will then read
+ * the status continuously from the chip until it indicates that it is not busy.
+ * The error flag of the status is then checked, before returning the result.
+ *
+ * \param chip Address of SerialFlash chip instance to operate on.
+ *
+ * \return Status of the operation.
+ * \retval STATUS_OK if operation succeeded.
+ * \retval STATUS_ERR_IO if an error occurred.
+ */
+static inline enum status_code _at25dfx_chip_get_nonbusy_status(
+		struct at25dfx_chip_module *chip)
+{
+	struct spi_master_vec_bufdesc vectors[2];
+
+	enum status_code status;
+	uint8_t data;
+
+	vectors[0].data = &data;
+	vectors[0].length = 1;
+	vectors[1].length = 0;
+
+	_at25dfx_chip_select(chip);
+
+	// Issue status read command
+	data = AT25DFX_COMMAND_READ_STATUS;
+
+	status = spi_master_vec_transceive_buffer_job(chip->spi, vectors, NULL);
+	Assert(status == STATUS_OK);
+	status = spi_master_vec_get_job_status_wait(chip->spi);
+	Assert(status == STATUS_OK);
+
+	// Keep reading until busy flag clears
+	do {
+		status = spi_master_vec_transceive_buffer_job(chip->spi, NULL, vectors);
+		Assert(status == STATUS_OK);
+		status = spi_master_vec_get_job_status_wait(chip->spi);
+		Assert(status == STATUS_OK);
+	} while (data & AT25DFX_STATUS_BUSY);
+
+	_at25dfx_chip_deselect(chip);
+
+	// Return final status
+	if (data & AT25DFX_STATUS_ERROR) {
+		return STATUS_ERR_IO;
+	}
+	return STATUS_OK;
+}
+
+//@}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // AT25DFX_PRIV_HAL_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/hal/spi_polled/at25dfx_hal.h b/common2/components/memory/serial_flash/at25dfx/hal/spi_polled/at25dfx_hal.h
new file mode 100644
index 00000000..2260e2db
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/hal/spi_polled/at25dfx_hal.h
@@ -0,0 +1,88 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx SerialFlash driver public SPI HAL interface.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef AT25DFX_HAL_H
+#define AT25DFX_HAL_H
+
+#include <spi.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_at25dfx_group
+ *
+ * @{
+ */
+
+/** Typedef for SPI HAL */
+typedef struct spi_module at25dfx_spi_module_t;
+
+/**
+ * \brief Initialize SPI configuration
+ *
+ * This function initializes the SPI configuration struct with default settings
+ * that should work with SerialFlash devices.
+ *
+ * The user can change the baud rate and the MUX settings for SERCOM and GPIO
+ * pads, but should leave all other settings intact.
+ *
+ * \param[out] config Address of config struct to initialize.
+ */
+static inline void at25dfx_spi_get_config_defaults(
+		struct spi_config *const config)
+{
+	spi_get_config_defaults(config);
+}
+
+/** @ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // AT25DFX_HAL_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/hal/spi_polled/at25dfx_priv_hal.h b/common2/components/memory/serial_flash/at25dfx/hal/spi_polled/at25dfx_priv_hal.h
new file mode 100644
index 00000000..cdbc4562
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/hal/spi_polled/at25dfx_priv_hal.h
@@ -0,0 +1,207 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx SerialFlash driver private SPI HAL interface.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef AT25DFX_PRIV_HAL_H
+#define AT25DFX_PRIV_HAL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//! \name Private SPI helpers
+//@{
+
+/** Alias for SPI lock function */
+#define _at25dfx_spi_lock    spi_lock
+/** Alias for SPI unlock function */
+#define _at25dfx_spi_unlock  spi_unlock
+
+/**
+ * \brief Issue a read command
+ *
+ * \param chip Address of SerialFlash chip instance to operate on.
+ * \param cmd The command to issue.
+ */
+static inline void _at25dfx_chip_issue_read_command_wait(
+		struct at25dfx_chip_module *chip, struct at25dfx_command cmd)
+{
+	enum status_code status;
+	uint8_t cmd_buffer[AT25DFX_COMMAND_MAX_SIZE];
+
+	UNUSED(status);
+
+	Assert((cmd.command_size) && (cmd.command_size <= AT25DFX_COMMAND_MAX_SIZE));
+
+	// Construct command to send
+	cmd_buffer[0] = cmd.opcode;
+
+	if (cmd.command_size > 1) {
+		Assert(cmd.command_size >= 4);
+
+		cmd_buffer[3] = cmd.address & 0xff;
+		cmd_buffer[2] = (cmd.address >> 8) & 0xff;
+		cmd_buffer[1] = (cmd.address >> 16) & 0xff;
+	}
+	// Don't bother with init of dummy bytes
+
+	// Issue command, then start read
+	_at25dfx_chip_select(chip);
+
+	status = spi_write_buffer_wait(chip->spi, cmd_buffer, cmd.command_size);
+	Assert(status == STATUS_OK);
+
+	if (cmd.length) {
+		status = spi_read_buffer_wait(chip->spi, cmd.data.rx, cmd.length, 0);
+		Assert(status == STATUS_OK);
+	}
+
+	_at25dfx_chip_deselect(chip);
+}
+
+/**
+ * \brief Issue a read command
+ *
+ * \param chip Address of SerialFlash chip instance to operate on.
+ * \param cmd The command to issue.
+ */
+static inline void _at25dfx_chip_issue_write_command_wait(
+		struct at25dfx_chip_module *chip, struct at25dfx_command cmd)
+{
+	enum status_code status;
+	uint8_t cmd_buffer[AT25DFX_COMMAND_MAX_SIZE];
+
+	UNUSED(status);
+
+	Assert((cmd.command_size) && (cmd.command_size <= AT25DFX_COMMAND_MAX_SIZE));
+
+	cmd_buffer[0] = cmd.opcode;
+
+	if (cmd.command_size > 1) {
+		Assert(cmd.command_size >= 4);
+
+		cmd_buffer[3] = cmd.address & 0xff;
+		cmd_buffer[2] = (cmd.address >> 8) & 0xff;
+		cmd_buffer[1] = (cmd.address >> 16) & 0xff;
+	}
+
+	_at25dfx_chip_select(chip);
+
+	status = spi_write_buffer_wait(chip->spi, cmd_buffer, cmd.command_size);
+	Assert(status == STATUS_OK);
+
+	if (cmd.length) {
+		status = spi_write_buffer_wait(chip->spi, cmd.data.tx, cmd.length);
+		Assert(status == STATUS_OK);
+	}
+
+	_at25dfx_chip_deselect(chip);
+}
+
+/**
+ * \brief Get status after current operation completes
+ *
+ * This function will issue a command to read out the status, and will then read
+ * the status continuously from the chip until it indicates that it is not busy.
+ * The error flag of the status is then checked, before returning the result.
+ *
+ * \param chip Address of SerialFlash chip instance to operate on.
+ *
+ * \return Status of the operation.
+ * \retval STATUS_OK if operation succeeded.
+ * \retval STATUS_ERR_IO if an error occurred.
+ */
+static inline enum status_code _at25dfx_chip_get_nonbusy_status(
+		struct at25dfx_chip_module *chip)
+{
+	enum status_code status;
+	uint16_t status_reg = 0;
+
+	UNUSED(status);
+
+	// Issue status read command
+	while (!spi_is_ready_to_write(chip->spi)) {
+	}
+
+	_at25dfx_chip_select(chip);
+	status = spi_write(chip->spi, AT25DFX_COMMAND_READ_STATUS);
+	Assert(status == STATUS_OK);
+
+	while (!spi_is_ready_to_read(chip->spi)) {
+	}
+	status = spi_read(chip->spi, &status_reg);
+	Assert(status == STATUS_OK);
+
+	// Keep reading until busy flag clears
+	// TODO: Add some timeout functionality here!
+	do {
+		// Do dummy writes to read out status
+		while (!spi_is_ready_to_write(chip->spi)) {
+		}
+		status = spi_write(chip->spi, 0);
+		Assert(status == STATUS_OK);
+
+		while (!spi_is_ready_to_read(chip->spi)) {
+		}
+		status = spi_read(chip->spi, &status_reg);
+		Assert(status == STATUS_OK);
+	} while (status_reg & AT25DFX_STATUS_BUSY);
+
+	_at25dfx_chip_deselect(chip);
+
+	// Return final status
+	if (status_reg & AT25DFX_STATUS_ERROR) {
+		return STATUS_ERR_IO;
+	}
+	return STATUS_OK;
+}
+
+//@}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // AT25DFX_PRIV_HAL_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/qs_at25dfx_basic.c b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/qs_at25dfx_basic.c
new file mode 100644
index 00000000..002f9fa4
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/qs_at25dfx_basic.c
@@ -0,0 +1,137 @@
+/**
+* \file
+*
+* \brief AT25DFx SerialFlash driver quick start
+*
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+*
+* \asf_license_start
+*
+* \page License
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*
+* 1. Redistributions of source code must retain the above copyright notice,
+* this list of conditions and the following disclaimer.
+*
+* 2. Redistributions in binary form must reproduce the above copyright notice,
+* this list of conditions and the following disclaimer in the documentation
+* and/or other materials provided with the distribution.
+*
+* 3. The name of Atmel may not be used to endorse or promote products derived
+* from this software without specific prior written permission.
+*
+* 4. This software may only be redistributed and used in connection with an
+* Atmel microcontroller product.
+*
+* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+*
+* \asf_license_stop
+*
+*/
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include "conf_at25dfx.h"
+
+
+//! [buffers]
+#define AT25DFX_BUFFER_SIZE  (10)
+
+static uint8_t read_buffer[AT25DFX_BUFFER_SIZE];
+static uint8_t write_buffer[AT25DFX_BUFFER_SIZE] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9};
+//! [buffers]
+
+//! [driver_instances]
+struct spi_module at25dfx_spi;
+struct at25dfx_chip_module at25dfx_chip;
+//! [driver_instances]
+
+//! [init_function]
+static void at25dfx_init(void)
+{
+//! [config_instances]
+	struct at25dfx_chip_config at25dfx_chip_config;
+	struct spi_config at25dfx_spi_config;	
+//! [config_instances]
+
+//! [spi_setup]
+	at25dfx_spi_get_config_defaults(&at25dfx_spi_config);
+	at25dfx_spi_config.mode_specific.master.baudrate = AT25DFX_CLOCK_SPEED;
+	at25dfx_spi_config.mux_setting = AT25DFX_SPI_PINMUX_SETTING;
+	at25dfx_spi_config.pinmux_pad0 = AT25DFX_SPI_PINMUX_PAD0;
+	at25dfx_spi_config.pinmux_pad1 = AT25DFX_SPI_PINMUX_PAD1;
+	at25dfx_spi_config.pinmux_pad2 = AT25DFX_SPI_PINMUX_PAD2;
+	at25dfx_spi_config.pinmux_pad3 = AT25DFX_SPI_PINMUX_PAD3;
+
+	spi_init(&at25dfx_spi, AT25DFX_SPI, &at25dfx_spi_config);
+	spi_enable(&at25dfx_spi);
+		
+//! [spi_setup]
+
+//! [chip_setup]
+	at25dfx_chip_config.type = AT25DFX_MEM_TYPE;
+	at25dfx_chip_config.cs_pin = AT25DFX_CS;
+
+	at25dfx_chip_init(&at25dfx_chip, &at25dfx_spi, &at25dfx_chip_config);
+
+//! [chip_setup]
+}
+//! [init_function]
+
+int main(void)
+{
+//! [init_calls]
+	system_init();
+	at25dfx_init();
+//! [init_calls]
+
+//! [use_code]
+//! [wake_chip]
+	at25dfx_chip_wake(&at25dfx_chip);
+//! [wake_chip]
+	
+//! [check_presence]
+	if (at25dfx_chip_check_presence(&at25dfx_chip) != STATUS_OK) {
+		// Handle missing or non-responsive device
+	}
+//! [check_presence]
+
+//! [read_buffer]
+	at25dfx_chip_read_buffer(&at25dfx_chip, 0x0000, read_buffer, AT25DFX_BUFFER_SIZE);
+//! [read_buffer]
+
+//! [unprotect_sector]
+	at25dfx_chip_set_sector_protect(&at25dfx_chip, 0x10000, false);
+//! [unprotect_sector]
+
+//! [erase_block]
+	at25dfx_chip_erase_block(&at25dfx_chip, 0x10000, AT25DFX_BLOCK_SIZE_4KB);
+//! [erase_block]
+
+//! [write_buffer]
+	at25dfx_chip_write_buffer(&at25dfx_chip, 0x10000, write_buffer, AT25DFX_BUFFER_SIZE);
+//! [write_buffer]
+
+//! [global_protect]
+	at25dfx_chip_set_global_sector_protect(&at25dfx_chip, true);
+//! [global_protect]
+
+//! [sleep]
+	at25dfx_chip_sleep(&at25dfx_chip);
+//! [sleep]
+//! [use_code]
+}
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/qs_at25dfx_basic.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/qs_at25dfx_basic.h
new file mode 100644
index 00000000..d75da291
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/qs_at25dfx_basic.h
@@ -0,0 +1,146 @@
+/**
+* \file
+*
+* \brief AT25DFx SerialFlash driver quick start
+*
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+*
+* \asf_license_start
+*
+* \page License
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*
+* 1. Redistributions of source code must retain the above copyright notice,
+* this list of conditions and the following disclaimer.
+*
+* 2. Redistributions in binary form must reproduce the above copyright notice,
+* this list of conditions and the following disclaimer in the documentation
+* and/or other materials provided with the distribution.
+*
+* 3. The name of Atmel may not be used to endorse or promote products derived
+* from this software without specific prior written permission.
+*
+* 4. This software may only be redistributed and used in connection with an
+* Atmel microcontroller product.
+*
+* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+*
+* \asf_license_stop
+*
+*/
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef QS_AT25DFX_BASIC_H
+#define QS_AT25DFX_BASIC_H
+
+/**
+* \page asfdoc_common2_at25dfx_basic_use Quick Start Guide for AT25DFx SerialFlash Driver
+*
+* This quick start will read, unprotect, erase and write bytes to an AT25DF081A
+* that is connected to the SPI interface on EXT1 header of SAM D20 Xplained Pro or EXT3 of SAM D21 Xplained Pro.
+*
+* The SERCOM SPI will be configured with the following settings:
+*
+* For SAM D20 Xplained Pro
+* - 500 kHz baud rate
+* - SCK, MISO and MOSI on EXT1 header's SPI pins
+*
+* For SAM D21 Xplained Pro 
+* - 120 kHz baud rate
+* - SCK, MISO and MOSI on EXT3
+*
+* The AT25DFx driver instance will be configured with the following settings:
+*
+* For SAM D20 Xplained Pro 
+* - CS on EXT1 header's SS0 pin
+*
+* For SAM D21 Xplained Pro 
+* - CS on EXT3 PA13
+*
+*
+* \section asfdoc_common2_at25dfx_basic_setup Setup
+*
+* \subsection asfdoc_common2_at25dfx_basic_prereq Prerequisites
+*
+* There are no special setup requirements for this use-case.
+*
+*
+* \subsection asfdoc_common2_at25dfx_basic_setup_code Code
+*
+* Add to the main application source file, outside of any functions:
+* \snippet qs_at25dfx_basic.c buffers
+* \snippet qs_at25dfx_basic.c driver_instances
+*
+* Create a new function for initializing the AT25DFx:
+* \snippet qs_at25dfx_basic.c init_function
+*
+* If not already present, add to the initialization code:
+* \snippet qs_at25dfx_basic.c init_calls
+*
+*
+* \subsection asfdoc_common2_at25dfx_basic_setup_flow Workflow
+*
+* -# Create read and write buffers.
+*    \snippet qs_at25dfx_basic.c buffers
+* -# Create global instances of SPI and AT25DFx chip.
+*    \snippet qs_at25dfx_basic.c driver_instances
+* -# Create a function to contain the AT25DFx initialization code.
+* -# Create local instances of SPI and AT25DFx configurations.
+*    \snippet qs_at25dfx_basic.c config_instances
+* -# Initialize the SPI for AT25DFx connected to EXT1 header.
+*    \snippet qs_at25dfx_basic.c spi_setup
+* -# Initialize the AT25DFx instance for AT25DF081A, with Slave Select on the
+* SS_0 pin on EXT1.
+*    \snippet qs_at25dfx_basic.c chip_setup
+*
+*
+* \section asfdoc_common2_at25dfx_basic_use_case Use Case
+*
+* \subsection asfdoc_common2_at25dfx_basic_use_case_code Code
+*
+* Copy into main application:
+* \snippet qs_at25dfx_basic.c use_code
+*
+*
+* \subsection asfdoc_common2_at25dfx_basic_use_case_flow Workflow
+*
+* -# Wakeup serialFlash.
+*    \snippet qs_at25dfx_basic.c wake_chip
+* -# Check that the SerialFlash is present.
+*    \snippet qs_at25dfx_basic.c check_presence
+* -# Read out the first \ref AT25DFX_BUFFER_SIZE bytes, starting at the very
+* first flash address.
+*    \snippet qs_at25dfx_basic.c read_buffer
+* -# Disable protection of the second sector.
+*    \note This device has sectors with a uniform size of 64 kB, so the address
+* \c 0x10000 marks the start of the second sector. This can differ between
+* devices.
+*
+*    \snippet qs_at25dfx_basic.c unprotect_sector
+* -# Erase the first 4 kB of the second 64 kB block (64-68 kB range).
+*    \snippet qs_at25dfx_basic.c erase_block
+* -# Write \ref AT25DFX_BUFFER_SIZE bytes, starting at the beginning of the
+* sector and the newly erased memory locations.
+*    \snippet qs_at25dfx_basic.c write_buffer
+* -# Enable protection of all sectors, to prevent accidental erases of content.
+*    \snippet qs_at25dfx_basic.c global_protect
+* -# Put SerialFlash device to sleep, to conserve power.
+*    \snippet qs_at25dfx_basic.c sleep
+*
+*/
+
+#endif // QS_AT25DFX_BASIC_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_at25dfx.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_at25dfx.h
new file mode 100644
index 00000000..7d3880a0
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_at25dfx.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_AT25DFX_H_INCLUDED
+#define CONF_AT25DFX_H_INCLUDED
+
+#include <board.h>
+#include "at25dfx.h"
+
+//! Select the SPI module AT25DFx is connected to
+#define AT25DFX_SPI                 EXT1_SPI_MODULE
+
+/** AT25DFx device type */
+#define AT25DFX_MEM_TYPE            AT25DFX_081A
+
+#define AT25DFX_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define AT25DFX_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define AT25DFX_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#define AT25DFX_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define AT25DFX_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define AT25DFX_CS                  EXT1_PIN_SPI_SS_0 
+
+//! SPI master speed in Hz.
+#define AT25DFX_CLOCK_SPEED         500000
+
+#endif  /* CONF_AT25DFX_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_board.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..6cf2ce95
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro board configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_clocks.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..6858b8e5
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,173 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              false
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  true
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                true
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_ULP32K
+#  define CONF_CLOCK_GCLK_4_PRESCALER             32
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_spi.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..39d15541
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/Makefile b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/asf.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2dd1ab81
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/asf.h
@@ -0,0 +1,101 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/config.mk b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..fe31f007
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc/config.mk
@@ -0,0 +1,164 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at25dfx_quick_start_basic_flash.elf
+TARGET_SRAM = at25dfx_quick_start_basic_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/serial_flash/at25dfx/at25dfx.c \
+       common2/components/memory/serial_flash/at25dfx/quick_start_basic/qs_at25dfx_basic.c \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/memory/serial_flash/at25dfx     \
+       common2/components/memory/serial_flash/at25dfx/hal/spi_polled \
+       common2/components/memory/serial_flash/at25dfx/quick_start_basic \
+       common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd20_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_at25dfx.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_at25dfx.h
new file mode 100644
index 00000000..a1f55db6
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_at25dfx.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_AT25DFX_H_INCLUDED
+#define CONF_AT25DFX_H_INCLUDED
+
+#include <board.h>
+#include "at25dfx.h"
+
+//! Select the SPI module AT25DFx is connected to
+#define AT25DFX_SPI                 SERIALFLASH_SPI_MODULE
+
+/** AT25DFx device type */
+#define AT25DFX_MEM_TYPE            AT25DFX_081A
+
+#define AT25DFX_SPI_PINMUX_SETTING  SERIALFLASH_SPI_MUX_SETTING
+#define AT25DFX_SPI_PINMUX_PAD0     SERIALFLASH_SPI_PINMUX_PAD0
+#define AT25DFX_SPI_PINMUX_PAD1     SERIALFLASH_SPI_PINMUX_PAD1
+#define AT25DFX_SPI_PINMUX_PAD2     SERIALFLASH_SPI_PINMUX_PAD2
+#define AT25DFX_SPI_PINMUX_PAD3     SERIALFLASH_SPI_PINMUX_PAD3
+
+#define AT25DFX_CS                  SERIALFLASH_SPI_CS 
+
+//! SPI master speed in Hz.
+#define AT25DFX_CLOCK_SPEED         120000
+
+#endif  /* CONF_AT25DFX_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_board.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..44865987
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_board.h
@@ -0,0 +1,51 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 configuration for the AT25DFX example
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#include "samd21_xplained_pro.h"
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_clocks.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..a0638af3
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_spi.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/Makefile b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/asf.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..1bb1e6c6
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/asf.h
@@ -0,0 +1,101 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/config.mk b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..b1f3dd85
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc/config.mk
@@ -0,0 +1,164 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at25dfx_quick_start_basic_flash.elf
+TARGET_SRAM = at25dfx_quick_start_basic_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/serial_flash/at25dfx/at25dfx.c \
+       common2/components/memory/serial_flash/at25dfx/quick_start_basic/qs_at25dfx_basic.c \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/memory/serial_flash/at25dfx     \
+       common2/components/memory/serial_flash/at25dfx/hal/spi_polled \
+       common2/components/memory/serial_flash/at25dfx/quick_start_basic \
+       common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/asf.h b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..1bb1e6c6
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/asf.h
@@ -0,0 +1,101 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic.eww b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic.eww
new file mode 100644
index 00000000..9c2a4a5d
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\at25dfx_quick_start_basic_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic_flash.ewd b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic_flash.ewd
new file mode 100644
index 00000000..4cb5f0b8
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic_flash.ewp b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic_flash.ewp
new file mode 100644
index 00000000..9f0c94ee
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/quick_start_basic/samd21_xplained_pro/iar/at25dfx_quick_start_basic_flash.ewp
@@ -0,0 +1,2618 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../hal/spi_polled</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../hal/spi_polled</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>at25dfx_quick_start_basic_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>at25dfx_quick_start_basic_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../hal/spi_polled</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../hal/spi_polled</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>at25dfx_quick_start_basic_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>at25dfx_quick_start_basic_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>serial_flash</name>
+					<group>
+						<name>at25dfx</name>
+						<group>
+							<name>quick_start_basic</name>
+							<file>
+								<name>$PROJ_DIR$/../../qs_at25dfx_basic.c</name>
+							</file>
+							<group>
+								<name>samd21_xplained_pro</name>
+								<file>
+									<name>$PROJ_DIR$/../conf_at25dfx.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_board.h</name>
+								</file>
+								<group>
+									<name>iar</name>
+									<file>
+										<name>$PROJ_DIR$/asf.h</name>
+									</file>
+								</group>
+								<file>
+									<name>$PROJ_DIR$/../conf_spi.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_clocks.h</name>
+								</file>
+							</group>
+							<file>
+								<name>$PROJ_DIR$/../../qs_at25dfx_basic.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../at25dfx.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../at25dfx.h</name>
+						</file>
+						<group>
+							<name>hal</name>
+							<group>
+								<name>spi_polled</name>
+								<file>
+									<name>$PROJ_DIR$/../../../hal/spi_polled/at25dfx_priv_hal.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../../../hal/spi_polled/at25dfx_hal.h</name>
+								</file>
+							</group>
+						</group>
+					</group>
+				</group>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_at25dfx.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_at25dfx.h
new file mode 100644
index 00000000..cee68dbf
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_at25dfx.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_AT25DFX_H_INCLUDED
+#define CONF_AT25DFX_H_INCLUDED
+
+#include <board.h>
+#include "at25dfx.h"
+
+//! Select the SPI module AT25DFx is connected to
+#define AT25DFX_SPI                 EXT1_SPI_MODULE
+
+/** AT25DFx device type */
+#define AT25DFX_MEM_TYPE            AT25DFX_081A
+
+#define AT25DFX_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define AT25DFX_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define AT25DFX_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#define AT25DFX_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define AT25DFX_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define AT25DFX_CS                  EXT1_PIN_SPI_SS_0 
+
+//! SPI master speed in Hz.
+#define AT25DFX_CLOCK_SPEED         1000000
+
+#endif  /* CONF_AT25DFX_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_board.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_board.h
new file mode 100644
index 00000000..6cf2ce95
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro board configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_clocks.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_clocks.h
new file mode 100644
index 00000000..79deb786
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_clocks.h
@@ -0,0 +1,173 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              false
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  true
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                true
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_ULP32K
+#  define CONF_CLOCK_GCLK_4_PRESCALER             32
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_spi.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_spi.h
new file mode 100644
index 00000000..39d15541
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_test.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_test.h
new file mode 100644
index 00000000..9e53f1fd
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/conf_test.h
@@ -0,0 +1,60 @@
+/**
+ * \file
+ *
+ * \brief Configuration of unit tests for AT25DFx driver.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H
+#define CONF_TEST_H
+
+#include <board.h>
+
+#define CONF_STDIO_USART_MODULE  EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING   EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0   EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1   EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2   EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3   EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE      115200
+
+#endif // CONF_TEST_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/Makefile b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/asf.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/asf.h
new file mode 100644
index 00000000..cf746efb
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/config.mk b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/config.mk
new file mode 100644
index 00000000..93e1aad7
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at25dfx_unit_test_flash.elf
+TARGET_SRAM = at25dfx_unit_test_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/serial_flash/at25dfx/at25dfx.c \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/unit_tests.c \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/serial_flash/at25dfx     \
+       common2/components/memory/serial_flash/at25dfx/hal/spi_polled \
+       common2/components/memory/serial_flash/at25dfx/unit_tests \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_polled_spi/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_at25dfx.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_at25dfx.h
new file mode 100644
index 00000000..cee68dbf
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_at25dfx.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_AT25DFX_H_INCLUDED
+#define CONF_AT25DFX_H_INCLUDED
+
+#include <board.h>
+#include "at25dfx.h"
+
+//! Select the SPI module AT25DFx is connected to
+#define AT25DFX_SPI                 EXT1_SPI_MODULE
+
+/** AT25DFx device type */
+#define AT25DFX_MEM_TYPE            AT25DFX_081A
+
+#define AT25DFX_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#define AT25DFX_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#define AT25DFX_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#define AT25DFX_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#define AT25DFX_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+#define AT25DFX_CS                  EXT1_PIN_SPI_SS_0 
+
+//! SPI master speed in Hz.
+#define AT25DFX_CLOCK_SPEED         1000000
+
+#endif  /* CONF_AT25DFX_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_board.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_board.h
new file mode 100644
index 00000000..6cf2ce95
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro board configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H
+#define CONF_BOARD_H
+
+#endif // CONF_BOARD_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_clocks.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_clocks.h
new file mode 100644
index 00000000..79deb786
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_clocks.h
@@ -0,0 +1,173 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              false
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  true
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                true
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_ULP32K
+#  define CONF_CLOCK_GCLK_4_PRESCALER             32
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_spi.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_spi.h
new file mode 100644
index 00000000..39d15541
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_spi_master_vec.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_spi_master_vec.h
new file mode 100644
index 00000000..394b1fa6
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_spi_master_vec.h
@@ -0,0 +1,68 @@
+/**
+ * \file
+ *
+ * \brief SERCOM SPI master with vectored I/O driver configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SPI_MASTER_VEC_H
+#define CONF_SPI_MASTER_VEC_H
+
+#if defined(__FREERTOS__) || defined(__DOXYGEN__)
+#  include <FreeRTOS.h>
+#  include <semphr.h>
+
+#  define CONF_SPI_MASTER_VEC_OS_SUPPORT
+#  define CONF_SPI_MASTER_VEC_SEMAPHORE_TYPE                   xSemaphoreHandle
+#  define CONF_SPI_MASTER_VEC_CREATE_SEMAPHORE(semaphore)  \
+		vSemaphoreCreateBinary(semaphore)
+#  define CONF_SPI_MASTER_VEC_DELETE_SEMAPHORE(semaphore)  \
+		vSemaphoreDelete(semaphore)
+#  define CONF_SPI_MASTER_VEC_TAKE_SEMAPHORE(semaphore)  \
+		xSemaphoreTake((semaphore), portMAX_DELAY)
+#  define CONF_SPI_MASTER_VEC_GIVE_SEMAPHORE(semaphore)  \
+		xSemaphoreGive((semaphore))
+#  define CONF_SPI_MASTER_VEC_GIVE_SEMAPHORE_FROM_ISR(semaphore)  \
+		xSemaphoreGiveFromISR((semaphore), NULL)
+#endif
+
+#endif // CONF_SPI_MASTER_VEC_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_test.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_test.h
new file mode 100644
index 00000000..9437486e
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/conf_test.h
@@ -0,0 +1,62 @@
+/**
+ * \file
+ *
+ * \brief Configuration of unit tests for AT25DFx driver.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H
+#define CONF_TEST_H
+
+#include <board.h>
+
+#define CONF_STDIO_USART_MODULE  EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING   EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0   EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1   EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2   EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3   EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE      115200
+
+#define CONF_TEST_VECTORED_MASTER
+
+#endif // CONF_TEST_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/Makefile b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/asf.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/asf.h
new file mode 100644
index 00000000..d9f79a6c
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Master Mode, Vectored I/O)

+#include <spi_master_vec.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/config.mk b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/config.mk
new file mode 100644
index 00000000..d0efd29d
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc/config.mk
@@ -0,0 +1,177 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at25dfx_unit_test_flash.elf
+TARGET_SRAM = at25dfx_unit_test_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/serial_flash/at25dfx/at25dfx.c \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/unit_tests.c \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/spi_master_vec/spi_master_vec.c \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/serial_flash/at25dfx     \
+       common2/components/memory/serial_flash/at25dfx/hal/spi_master_vec \
+       common2/components/memory/serial_flash/at25dfx/unit_tests \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/spi_master_vec                 \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/samd20_xplained_pro_vectored_master_spi/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_at25dfx.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_at25dfx.h
new file mode 100644
index 00000000..65f4fdaf
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_at25dfx.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_AT25DFX_H_INCLUDED
+#define CONF_AT25DFX_H_INCLUDED
+
+#include <board.h>
+#include "at25dfx.h"
+
+//! Select the SPI module AT25DFx is connected to
+#define AT25DFX_SPI                 SERIALFLASH_SPI_MODULE
+
+/** AT25DFx device type */
+#define AT25DFX_MEM_TYPE            AT25DFX_081A
+
+#define AT25DFX_SPI_PINMUX_SETTING  SERIALFLASH_SPI_MUX_SETTING
+#define AT25DFX_SPI_PINMUX_PAD0     SERIALFLASH_SPI_PINMUX_PAD0
+#define AT25DFX_SPI_PINMUX_PAD1     SERIALFLASH_SPI_PINMUX_PAD1
+#define AT25DFX_SPI_PINMUX_PAD2     SERIALFLASH_SPI_PINMUX_PAD2
+#define AT25DFX_SPI_PINMUX_PAD3     SERIALFLASH_SPI_PINMUX_PAD3
+
+#define AT25DFX_CS                  SERIALFLASH_SPI_CS 
+
+//! SPI master speed in Hz.
+#define AT25DFX_CLOCK_SPEED         1000000
+
+#endif  /* CONF_AT25DFX_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_board.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_board.h
new file mode 100644
index 00000000..44865987
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_board.h
@@ -0,0 +1,51 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 configuration for the AT25DFX example
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#include "samd21_xplained_pro.h"
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_clocks.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_clocks.h
new file mode 100644
index 00000000..a0638af3
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_spi.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_test.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_test.h
new file mode 100644
index 00000000..9e53f1fd
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/conf_test.h
@@ -0,0 +1,60 @@
+/**
+ * \file
+ *
+ * \brief Configuration of unit tests for AT25DFx driver.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H
+#define CONF_TEST_H
+
+#include <board.h>
+
+#define CONF_STDIO_USART_MODULE  EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING   EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0   EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1   EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2   EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3   EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE      115200
+
+#endif // CONF_TEST_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/Makefile b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/asf.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/asf.h
new file mode 100644
index 00000000..9df0c111
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/config.mk b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/config.mk
new file mode 100644
index 00000000..a2420b36
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at25dfx_unit_test_flash.elf
+TARGET_SRAM = at25dfx_unit_test_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/serial_flash/at25dfx/at25dfx.c \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/unit_tests.c \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/serial_flash/at25dfx     \
+       common2/components/memory/serial_flash/at25dfx/hal/spi_polled \
+       common2/components/memory/serial_flash/at25dfx/unit_tests \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/asf.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/asf.h
new file mode 100644
index 00000000..9df0c111
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/asf.h
@@ -0,0 +1,114 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test.eww b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test.eww
new file mode 100644
index 00000000..2d3e921c
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\at25dfx_unit_test_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test_flash.ewd b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test_flash.ewd
new file mode 100644
index 00000000..4cb5f0b8
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test_flash.ewp b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test_flash.ewp
new file mode 100644
index 00000000..2915fbc1
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_polled_spi/iar/at25dfx_unit_test_flash.ewp
@@ -0,0 +1,2726 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../hal/spi_polled</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../hal/spi_polled</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>at25dfx_unit_test_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>at25dfx_unit_test_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../hal/spi_polled</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../hal/spi_polled</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>at25dfx_unit_test_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>at25dfx_unit_test_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>serial_flash</name>
+					<group>
+						<name>at25dfx</name>
+						<group>
+							<name>unit_tests</name>
+							<file>
+								<name>$PROJ_DIR$/../../unit_tests.c</name>
+							</file>
+							<group>
+								<name>samd21_xplained_pro_polled_spi</name>
+								<file>
+									<name>$PROJ_DIR$/../conf_at25dfx.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_board.h</name>
+								</file>
+								<group>
+									<name>iar</name>
+									<file>
+										<name>$PROJ_DIR$/asf.h</name>
+									</file>
+								</group>
+								<file>
+									<name>$PROJ_DIR$/../conf_test.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_spi.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_clocks.h</name>
+								</file>
+							</group>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../at25dfx.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../at25dfx.h</name>
+						</file>
+						<group>
+							<name>quick_start_basic</name>
+							<file>
+								<name>$PROJ_DIR$/../../../quick_start_basic/qs_at25dfx_basic.h</name>
+							</file>
+						</group>
+						<group>
+							<name>hal</name>
+							<group>
+								<name>spi_polled</name>
+								<file>
+									<name>$PROJ_DIR$/../../../hal/spi_polled/at25dfx_priv_hal.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../../../hal/spi_polled/at25dfx_hal.h</name>
+								</file>
+							</group>
+						</group>
+					</group>
+				</group>
+			</group>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_at25dfx.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_at25dfx.h
new file mode 100644
index 00000000..65f4fdaf
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_at25dfx.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief AT25DFx configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_AT25DFX_H_INCLUDED
+#define CONF_AT25DFX_H_INCLUDED
+
+#include <board.h>
+#include "at25dfx.h"
+
+//! Select the SPI module AT25DFx is connected to
+#define AT25DFX_SPI                 SERIALFLASH_SPI_MODULE
+
+/** AT25DFx device type */
+#define AT25DFX_MEM_TYPE            AT25DFX_081A
+
+#define AT25DFX_SPI_PINMUX_SETTING  SERIALFLASH_SPI_MUX_SETTING
+#define AT25DFX_SPI_PINMUX_PAD0     SERIALFLASH_SPI_PINMUX_PAD0
+#define AT25DFX_SPI_PINMUX_PAD1     SERIALFLASH_SPI_PINMUX_PAD1
+#define AT25DFX_SPI_PINMUX_PAD2     SERIALFLASH_SPI_PINMUX_PAD2
+#define AT25DFX_SPI_PINMUX_PAD3     SERIALFLASH_SPI_PINMUX_PAD3
+
+#define AT25DFX_CS                  SERIALFLASH_SPI_CS 
+
+//! SPI master speed in Hz.
+#define AT25DFX_CLOCK_SPEED         1000000
+
+#endif  /* CONF_AT25DFX_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_board.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_board.h
new file mode 100644
index 00000000..44865987
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_board.h
@@ -0,0 +1,51 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 configuration for the AT25DFX example
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#include "samd21_xplained_pro.h"
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_clocks.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_clocks.h
new file mode 100644
index 00000000..a0638af3
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_spi.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_spi_master_vec.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_spi_master_vec.h
new file mode 100644
index 00000000..394b1fa6
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_spi_master_vec.h
@@ -0,0 +1,68 @@
+/**
+ * \file
+ *
+ * \brief SERCOM SPI master with vectored I/O driver configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SPI_MASTER_VEC_H
+#define CONF_SPI_MASTER_VEC_H
+
+#if defined(__FREERTOS__) || defined(__DOXYGEN__)
+#  include <FreeRTOS.h>
+#  include <semphr.h>
+
+#  define CONF_SPI_MASTER_VEC_OS_SUPPORT
+#  define CONF_SPI_MASTER_VEC_SEMAPHORE_TYPE                   xSemaphoreHandle
+#  define CONF_SPI_MASTER_VEC_CREATE_SEMAPHORE(semaphore)  \
+		vSemaphoreCreateBinary(semaphore)
+#  define CONF_SPI_MASTER_VEC_DELETE_SEMAPHORE(semaphore)  \
+		vSemaphoreDelete(semaphore)
+#  define CONF_SPI_MASTER_VEC_TAKE_SEMAPHORE(semaphore)  \
+		xSemaphoreTake((semaphore), portMAX_DELAY)
+#  define CONF_SPI_MASTER_VEC_GIVE_SEMAPHORE(semaphore)  \
+		xSemaphoreGive((semaphore))
+#  define CONF_SPI_MASTER_VEC_GIVE_SEMAPHORE_FROM_ISR(semaphore)  \
+		xSemaphoreGiveFromISR((semaphore), NULL)
+#endif
+
+#endif // CONF_SPI_MASTER_VEC_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_test.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_test.h
new file mode 100644
index 00000000..9437486e
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/conf_test.h
@@ -0,0 +1,62 @@
+/**
+ * \file
+ *
+ * \brief Configuration of unit tests for AT25DFx driver.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_TEST_H
+#define CONF_TEST_H
+
+#include <board.h>
+
+#define CONF_STDIO_USART_MODULE  EDBG_CDC_MODULE
+#define CONF_STDIO_MUX_SETTING   EDBG_CDC_SERCOM_MUX_SETTING
+#define CONF_STDIO_PINMUX_PAD0   EDBG_CDC_SERCOM_PINMUX_PAD0
+#define CONF_STDIO_PINMUX_PAD1   EDBG_CDC_SERCOM_PINMUX_PAD1
+#define CONF_STDIO_PINMUX_PAD2   EDBG_CDC_SERCOM_PINMUX_PAD2
+#define CONF_STDIO_PINMUX_PAD3   EDBG_CDC_SERCOM_PINMUX_PAD3
+#define CONF_STDIO_BAUDRATE      115200
+
+#define CONF_TEST_VECTORED_MASTER
+
+#endif // CONF_TEST_H
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/Makefile b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/asf.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/asf.h
new file mode 100644
index 00000000..e564696b
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Master Mode, Vectored I/O)

+#include <spi_master_vec.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/config.mk b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/config.mk
new file mode 100644
index 00000000..ab67d348
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc/config.mk
@@ -0,0 +1,177 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at25dfx_unit_test_flash.elf
+TARGET_SRAM = at25dfx_unit_test_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common/utils/unit_test/suite.c                     \
+       common2/components/memory/serial_flash/at25dfx/at25dfx.c \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/unit_tests.c \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/sercom/spi_master_vec/spi_master_vec.c \
+       sam0/drivers/sercom/usart/usart.c                  \
+       sam0/drivers/sercom/usart/usart_interrupt.c        \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/stdio/read.c                            \
+       sam0/utils/stdio/write.c                           \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/services/serial                             \
+       common/utils                                       \
+       common2/components/memory/serial_flash/at25dfx     \
+       common2/components/memory/serial_flash/at25dfx/hal/spi_master_vec \
+       common2/components/memory/serial_flash/at25dfx/unit_tests \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/sercom/spi_master_vec                 \
+       sam0/drivers/sercom/usart                          \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       sam0/utils/stdio/stdio_serial                      \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D TEST_SUITE_DEFINE_ASSERT_MACRO                  \
+       -D USART_CALLBACK_MODE=true                        \
+       -D _ASSERT_ENABLE_                                 \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/asf.h b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/asf.h
new file mode 100644
index 00000000..e564696b
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/asf.h
@@ -0,0 +1,117 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Common files for AT25DFx SerialFlash drivers

+#include <at25dfx.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Master Mode, Vectored I/O)

+#include <spi_master_vec.h>

+

+// From module: SERCOM USART - Serial Communications (Callback APIs)

+#include <usart.h>

+#include <usart_interrupt.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+

+// From module: Standard serial I/O (stdio)

+#include <stdio_serial.h>

+

+// From module: USART - Serial interface- SAM implementation for devices with only USART

+#include <serial.h>

+

+// From module: Unit test framework - SAM0 implementation

+#include <unit_test/suite.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test.eww b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test.eww
new file mode 100644
index 00000000..2d3e921c
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\at25dfx_unit_test_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test_flash.ewd b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test_flash.ewd
new file mode 100644
index 00000000..4cb5f0b8
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test_flash.ewp b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test_flash.ewp
new file mode 100644
index 00000000..2459d721
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/samd21_xplained_pro_vectored_master_spi/iar/at25dfx_unit_test_flash.ewp
@@ -0,0 +1,2748 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../hal/spi_master_vec</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi_master_vec</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../hal/spi_master_vec</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi_master_vec</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>at25dfx_unit_test_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>at25dfx_unit_test_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../hal/spi_master_vec</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi_master_vec</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>_ASSERT_ENABLE_</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>TEST_SUITE_DEFINE_ASSERT_MACRO</state>
+					<state>USART_CALLBACK_MODE=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../hal/spi_master_vec</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/services/serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi_master_vec</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial</state>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>at25dfx_unit_test_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>at25dfx_unit_test_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/usart.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/quick_start_callback/qs_usart_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/usart_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/quick_start/qs_usart_basic_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_lin</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/quick_start_lin/qs_lin.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/quick_start_dma/qs_usart_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/usart/usart.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<group>
+					<name>spi_master_vec</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi_master_vec/spi_master_vec.c</name>
+					</file>
+					<group>
+						<name>quick_start_basic</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi_master_vec/quick_start_basic/qs_spi_master_vec_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/spi_master_vec/spi_master_vec.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>stdio</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/write.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/read.c</name>
+				</file>
+				<group>
+					<name>stdio_serial</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../sam0/utils/stdio/stdio_serial/stdio_serial.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>memory</name>
+				<group>
+					<name>serial_flash</name>
+					<group>
+						<name>at25dfx</name>
+						<group>
+							<name>unit_tests</name>
+							<file>
+								<name>$PROJ_DIR$/../../unit_tests.c</name>
+							</file>
+							<group>
+								<name>samd21_xplained_pro_vectored_master_spi</name>
+								<file>
+									<name>$PROJ_DIR$/../conf_at25dfx.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_spi_master_vec.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_board.h</name>
+								</file>
+								<group>
+									<name>iar</name>
+									<file>
+										<name>$PROJ_DIR$/asf.h</name>
+									</file>
+								</group>
+								<file>
+									<name>$PROJ_DIR$/../conf_test.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_spi.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../conf_clocks.h</name>
+								</file>
+							</group>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../at25dfx.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../at25dfx.h</name>
+						</file>
+						<group>
+							<name>hal</name>
+							<group>
+								<name>spi_master_vec</name>
+								<file>
+									<name>$PROJ_DIR$/../../../hal/spi_master_vec/at25dfx_priv_hal.h</name>
+								</file>
+								<file>
+									<name>$PROJ_DIR$/../../../hal/spi_master_vec/at25dfx_hal.h</name>
+								</file>
+							</group>
+						</group>
+						<group>
+							<name>quick_start_basic</name>
+							<file>
+								<name>$PROJ_DIR$/../../../quick_start_basic/qs_at25dfx_basic.h</name>
+							</file>
+						</group>
+					</group>
+				</group>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>unit_test</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/unit_test/suite.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/unit_test/suite.h</name>
+				</file>
+			</group>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/utils/parts.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/utils/interrupt.h</name>
+			</file>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>serial</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../../../common/services/serial/serial.h</name>
+				</file>
+				<group>
+					<name>sam0_usart</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../../../common/services/serial/sam0_usart/usart_serial.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/components/memory/serial_flash/at25dfx/unit_tests/unit_tests.c b/common2/components/memory/serial_flash/at25dfx/unit_tests/unit_tests.c
new file mode 100644
index 00000000..b27dfa1b
--- /dev/null
+++ b/common2/components/memory/serial_flash/at25dfx/unit_tests/unit_tests.c
@@ -0,0 +1,558 @@
+/**
+ * \file
+ *
+ * \brief Unit tests for AT25DFx driver.
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \mainpage AT25DFx SerialFlash Driver Unit Test
+ *
+ * See \ref appdoc_main "here" for project documentation.
+ * \copydetails appdoc_preface
+ *
+ *
+ * \page appdoc_preface Overview
+ *
+ * This application runs a suite of tests for the AT25DFx SerialFlash driver
+ * with any SPI HAL that is supported by the driver and for which setup code
+ * has been added to this application.
+ */
+
+/**
+ * \page appdoc_main AT25DFx SerialFlash Driver Unit Test
+ *
+ * Overview:
+ * - \ref appdoc_common2_at25dfx_unit_test_intro
+ * - \ref appdoc_common2_at25dfx_unit_test_setup
+ * - \ref appdoc_common2_at25dfx_unit_test_compinfo
+ * - \ref appdoc_common2_at25dfx_unit_test_contactinfo
+ *
+ *
+ * \section appdoc_common2_at25dfx_unit_test_intro Introduction
+ * \copydetails appdoc_preface
+ *
+ * The test suite consists of test cases for the following functionality:
+ * - chip presence checking
+ * - reading and writing of buffers
+ * - chip erase
+ * - block erase
+ * - global protection
+ * - sector protection
+ * - sleeping and waking
+ *
+ * The test suite has been written to test with an AT25DF081A on the EXT1 header
+ * of an Xplained Pro board.
+ *
+ * Test reporting is done via UART configured on \ref CONF_STDIO_USART_MODULE,
+ * with baud rate \ref CONF_STDIO_BAUDRATE. The convention is to use EDBG CDC.
+ *
+ *
+ * \section appdoc_common2_at25dfx_unit_test_setup Setup
+ *
+ * Connect a SerialFlash () wing board to EXT1 of the Xplained Pro.
+ * The SPI pin mapping is according to the convention, meaning the regular MISO,
+ * MOSI, SCK and SS_0 as defined in the board definition header file.
+ *
+ * \note SS_1 is used as a dummy pin in verification of presence checking.
+ *
+ *
+ * \section appdoc_common2_at25dfx_unit_test_compinfo Compilation Info
+ *
+ * This software was written for the GNU GCC for ARM.
+ * Other compilers may or may not work.
+ *
+ *
+ * \section appdoc_common2_at25dfx_unit_test_contactinfo Contact Information
+ *
+ * For further information, visit
+ * <a href="http://www.atmel.com">http://www.atmel.com</a>.
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include <asf.h>
+#include <conf_test.h>
+#include <conf_at25dfx.h>
+
+#define TEST_BUFFER_SIZE  16
+#define TEST_ERASE_VALUE  0xff
+#define TEST_FLASH_SIZE   (1024 * 1024UL)
+#define TEST_PAGE_SIZE    256
+
+
+static at25dfx_spi_module_t at25dfx_spi;
+
+static struct at25dfx_chip_module at25dfx_chip;
+static struct at25dfx_chip_module at25dfx_dummy;
+static struct usart_module cdc_uart_module;
+
+static uint8_t test_rx_buffer[TEST_BUFFER_SIZE];
+static uint8_t test_tx_buffer[TEST_BUFFER_SIZE] = {
+		0x12, 0x34, 0x56, 0x78,
+		0x9a, 0xbc, 0xde, 0xf0,
+		0x21, 0x43, 0x65, 0x87,
+		0xa9, 0xcb, 0xed, 0x0f,
+	};
+
+
+static void cdc_uart_init(void)
+{
+	struct usart_config usart_conf;
+
+	/* Configure USART for unit test output */
+	usart_get_config_defaults(&usart_conf);
+	usart_conf.mux_setting = CONF_STDIO_MUX_SETTING;
+	usart_conf.pinmux_pad0 = CONF_STDIO_PINMUX_PAD0;
+	usart_conf.pinmux_pad1 = CONF_STDIO_PINMUX_PAD1;
+	usart_conf.pinmux_pad2 = CONF_STDIO_PINMUX_PAD2;
+	usart_conf.pinmux_pad3 = CONF_STDIO_PINMUX_PAD3;
+	usart_conf.baudrate    = CONF_STDIO_BAUDRATE;
+
+	stdio_serial_init(&cdc_uart_module, CONF_STDIO_USART_MODULE, &usart_conf);
+	usart_enable(&cdc_uart_module);
+}
+
+static void test_at25dfx_init(void)
+{
+	struct at25dfx_chip_config at25dfx_chip_config;
+
+#ifdef CONF_TEST_VECTORED_MASTER
+	struct spi_master_vec_config at25dfx_spi_config;
+	at25dfx_spi_master_vec_get_config_defaults(&at25dfx_spi_config);
+	at25dfx_spi_config.baudrate = AT25DFX_CLOCK_SPEED;
+#else
+	struct spi_config at25dfx_spi_config;
+	at25dfx_spi_get_config_defaults(&at25dfx_spi_config);
+	at25dfx_spi_config.mode_specific.master.baudrate = AT25DFX_CLOCK_SPEED;
+#endif
+
+	at25dfx_spi_config.mux_setting = AT25DFX_SPI_PINMUX_SETTING;
+	at25dfx_spi_config.pinmux_pad0 = AT25DFX_SPI_PINMUX_PAD0;
+	at25dfx_spi_config.pinmux_pad1 = AT25DFX_SPI_PINMUX_PAD1; 
+	at25dfx_spi_config.pinmux_pad2 = AT25DFX_SPI_PINMUX_PAD2;
+	at25dfx_spi_config.pinmux_pad3 = AT25DFX_SPI_PINMUX_PAD3;
+
+#ifdef CONF_TEST_VECTORED_MASTER
+	spi_master_vec_init(&at25dfx_spi, AT25DFX_SPI, &at25dfx_spi_config);
+	spi_master_vec_enable(&at25dfx_spi);
+#else
+	spi_init(&at25dfx_spi, AT25DFX_SPI, &at25dfx_spi_config);
+	spi_enable(&at25dfx_spi);
+#endif
+
+	// Initialize real and dummy chip
+	at25dfx_chip_config.type = AT25DFX_MEM_TYPE;
+	at25dfx_chip_config.cs_pin = AT25DFX_CS;
+
+	at25dfx_chip_init(&at25dfx_chip, &at25dfx_spi, &at25dfx_chip_config);
+
+	at25dfx_chip_config.cs_pin = EXT1_PIN_SPI_SS_1;
+
+	at25dfx_chip_init(&at25dfx_dummy, &at25dfx_spi, &at25dfx_chip_config);
+}
+
+
+//! \name Tests
+//@{
+
+static void run_check_presence_test(const struct test_case *test)
+{
+	enum status_code status;
+
+	status = at25dfx_chip_check_presence(&at25dfx_chip);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to detect presence of chip");
+
+	status = at25dfx_chip_check_presence(&at25dfx_dummy);
+	test_assert_true(test, status == STATUS_ERR_NOT_FOUND,
+			"Failed to detect absence of chip");
+}
+
+
+static void run_read_write_buffer_test(const struct test_case *test)
+{
+	enum status_code status;
+
+// Globally disable sector protect
+	at25dfx_chip_set_global_sector_protect(&at25dfx_chip, false);
+
+// Read out of bounds, verify ARG ERROR status
+	status = at25dfx_chip_read_buffer(&at25dfx_chip,
+			TEST_FLASH_SIZE, test_rx_buffer, 1);
+	test_assert_true(test, status == STATUS_ERR_INVALID_ARG,
+			"Failed to detect out of bounds read");
+
+// Write out of bounds, verify ARG ERROR status
+	status = at25dfx_chip_write_buffer(&at25dfx_chip,
+			TEST_FLASH_SIZE, test_tx_buffer, 1);
+	test_assert_true(test, status == STATUS_ERR_INVALID_ARG,
+			"Failed to detect out of bounds write");
+
+// Erase device
+	at25dfx_chip_erase(&at25dfx_chip);
+
+// Write first byte
+	status = at25dfx_chip_write_buffer(&at25dfx_chip,
+			0, &test_tx_buffer[0], 1);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to write first byte");
+
+// Write last byte
+	status = at25dfx_chip_write_buffer(&at25dfx_chip,
+			TEST_FLASH_SIZE - 1, &test_tx_buffer[1], 1);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to write last byte");
+
+// Read two first bytes back, verify values
+	status = at25dfx_chip_read_buffer(&at25dfx_chip,
+			0, &test_rx_buffer[0], 2);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to read two first bytes");
+
+	test_assert_true(test,
+			(test_rx_buffer[0] == test_tx_buffer[0])
+			&& (test_rx_buffer[1] == TEST_ERASE_VALUE),
+			"Verification of two first bytes failed");
+
+// Read last byte back, verify value
+	status = at25dfx_chip_read_buffer(&at25dfx_chip,
+			TEST_FLASH_SIZE - 1, &test_rx_buffer[1], 1);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to read last byte");
+
+	test_assert_true(test, test_rx_buffer[1] == test_tx_buffer[1],
+			"Verification of last byte failed");
+
+// Do write of multiple bytes across page boundary
+	status = at25dfx_chip_write_buffer(&at25dfx_chip,
+			TEST_PAGE_SIZE - TEST_BUFFER_SIZE/2,
+			&test_tx_buffer[0], TEST_BUFFER_SIZE);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to write across page boundary");
+
+// Read bytes back, verify
+	status = at25dfx_chip_read_buffer(&at25dfx_chip,
+			TEST_PAGE_SIZE - TEST_BUFFER_SIZE/2,
+			&test_rx_buffer[0], TEST_BUFFER_SIZE);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to read multiple bytes");
+
+	test_assert_true(test,
+			test_rx_buffer[0] == test_tx_buffer[0],
+			"Verification of cross page boundary write failed at first byte");
+	test_assert_true(test,
+			test_rx_buffer[TEST_BUFFER_SIZE/2 - 1] == test_tx_buffer[TEST_BUFFER_SIZE/2 - 1],
+			"Verification of cross page boundary write failed at last byte in first page");
+	test_assert_true(test,
+			test_rx_buffer[TEST_BUFFER_SIZE/2] == test_tx_buffer[TEST_BUFFER_SIZE/2],
+			"Verification of cross page boundary write failed at first byte in new page");
+	test_assert_true(test,
+			test_rx_buffer[TEST_BUFFER_SIZE - 1] == test_tx_buffer[TEST_BUFFER_SIZE - 1],
+			"Verification of cross page boundary write failed at last byte in new page");
+}
+
+static void run_erase_test(const struct test_case *test)
+{
+	enum status_code status;
+
+// Globally disable sector protect
+	at25dfx_chip_set_global_sector_protect(&at25dfx_chip, false);
+
+// Write first and last byte
+	at25dfx_chip_write_buffer(&at25dfx_chip, 0, &test_tx_buffer[0], 1);
+	at25dfx_chip_write_buffer(&at25dfx_chip, TEST_FLASH_SIZE - 1, &test_tx_buffer[1], 1);
+
+// Do chip erase
+	status = at25dfx_chip_erase(&at25dfx_chip);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to erase chip");
+
+// Read back first and last byte
+	at25dfx_chip_read_buffer(&at25dfx_chip,	0, &test_rx_buffer[0], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip,	TEST_FLASH_SIZE - 1, &test_rx_buffer[1], 1);
+
+// Verify both bytes erased
+	test_assert_true(test,
+			(test_rx_buffer[0] == TEST_ERASE_VALUE)
+			&& (test_rx_buffer[1] == TEST_ERASE_VALUE),
+			"Verification of chip erase failed");
+}
+
+static void run_erase_block_test(const struct test_case *test)
+{
+	enum status_code status;
+
+// Globally disable sector protect
+	at25dfx_chip_set_global_sector_protect(&at25dfx_chip, false);
+
+// Erase out of bounds block, verify ARG ERR status
+	status = at25dfx_chip_erase_block(&at25dfx_chip,
+		TEST_FLASH_SIZE, AT25DFX_BLOCK_SIZE_4KB);
+	test_assert_true(test, status == STATUS_ERR_INVALID_ARG,
+			"Failed to detect out of bounds erase");
+
+// Write to first byte, 4k boundary, 32k boundary and 64k boundary
+	at25dfx_chip_write_buffer(&at25dfx_chip, 0, &test_tx_buffer[0], 1);
+	at25dfx_chip_write_buffer(&at25dfx_chip, 1UL << 12, &test_tx_buffer[1], 1);
+	at25dfx_chip_write_buffer(&at25dfx_chip, 1UL << 15, &test_tx_buffer[2], 1);
+	at25dfx_chip_write_buffer(&at25dfx_chip, 1UL << 16, &test_tx_buffer[3], 1);
+
+// Erase first 4 k block
+	at25dfx_chip_erase_block(&at25dfx_chip, 0, AT25DFX_BLOCK_SIZE_4KB);
+	
+// Verify byte 0 erased, others intact
+	at25dfx_chip_read_buffer(&at25dfx_chip, 0, &test_rx_buffer[0], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip, 1UL << 12, &test_rx_buffer[1], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip, 1UL << 15, &test_rx_buffer[2], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip, 1UL << 16, &test_rx_buffer[3], 1);
+	test_assert_true(test,
+			(test_rx_buffer[0] == TEST_ERASE_VALUE)
+			&& (test_rx_buffer[1] == test_tx_buffer[1])
+			&& (test_rx_buffer[2] == test_tx_buffer[2])
+			&& (test_rx_buffer[3] == test_tx_buffer[3]),
+			"Verification of 4 kB block erase failed");
+
+// Erase first 32 k block
+	at25dfx_chip_erase_block(&at25dfx_chip, 0, AT25DFX_BLOCK_SIZE_32KB);
+
+// Verify byte 2^14 erased, 2^15 intact
+	at25dfx_chip_read_buffer(&at25dfx_chip, 1UL << 12, &test_rx_buffer[1], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip, 1UL << 15, &test_rx_buffer[2], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip, 1UL << 16, &test_rx_buffer[3], 1);
+	test_assert_true(test,
+			(test_rx_buffer[1] == TEST_ERASE_VALUE)
+			&& (test_rx_buffer[2] == test_tx_buffer[2])
+			&& (test_rx_buffer[3] == test_tx_buffer[3]),
+			"Verification of 32 kB block erase failed");
+
+// Erase first 64 k block
+	at25dfx_chip_erase_block(&at25dfx_chip, 0, AT25DFX_BLOCK_SIZE_64KB);
+
+// Verify byte 2^15 erased, 2^16 intact
+	at25dfx_chip_read_buffer(&at25dfx_chip, 1UL << 15, &test_rx_buffer[2], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip, 1UL << 16, &test_rx_buffer[3], 1);
+	test_assert_true(test,
+			(test_rx_buffer[2] == TEST_ERASE_VALUE)
+			&& (test_rx_buffer[3] == test_tx_buffer[3]),
+			"Verification of 64 kB block erase failed");
+}
+
+static void run_global_sector_protect_test(const struct test_case *test)
+{
+	enum status_code status;
+
+// Globally disable sector protect
+	status = at25dfx_chip_set_global_sector_protect(&at25dfx_chip, false);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to globally disable sector protection");
+
+// Write to first and last byte
+	at25dfx_chip_write_buffer(&at25dfx_chip, 0, &test_tx_buffer[0], 1);
+	at25dfx_chip_write_buffer(&at25dfx_chip, TEST_FLASH_SIZE - 1, &test_tx_buffer[1], 1);
+
+// Globally enable protect
+	status = at25dfx_chip_set_global_sector_protect(&at25dfx_chip, true);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to globally enable sector protection");
+
+// Attempt chip erase
+	at25dfx_chip_erase(&at25dfx_chip);
+
+// Verify bytes intact
+	at25dfx_chip_read_buffer(&at25dfx_chip, 0, &test_rx_buffer[0], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip, TEST_FLASH_SIZE - 1, &test_rx_buffer[1], 1);
+	test_assert_true(test,
+			(test_rx_buffer[0] == test_tx_buffer[0])
+			&& (test_rx_buffer[1] == test_tx_buffer[1]),
+			"Verification of intact bytes failed");
+
+// Globally disable protect
+	at25dfx_chip_set_global_sector_protect(&at25dfx_chip, false);
+
+// Attempt chip erase
+	at25dfx_chip_erase(&at25dfx_chip);
+
+// Verify bytes erased
+	at25dfx_chip_read_buffer(&at25dfx_chip, 0, &test_rx_buffer[0], 1);
+	at25dfx_chip_read_buffer(&at25dfx_chip, TEST_FLASH_SIZE - 1, &test_rx_buffer[1], 1);
+	test_assert_true(test,
+			(test_rx_buffer[0] == TEST_ERASE_VALUE)
+			&& (test_rx_buffer[1] == TEST_ERASE_VALUE),
+			"Verification of erased bytes failed");
+}
+
+static void run_set_get_sector_protect_test(const struct test_case *test)
+{
+	bool protect_1, protect_2;
+	enum status_code status;
+
+// Globally disable sector protect
+	at25dfx_chip_set_global_sector_protect(&at25dfx_chip, false);
+
+// Get out of bounds sector protect
+	status = at25dfx_chip_get_sector_protect(&at25dfx_chip, TEST_FLASH_SIZE, &protect_1);
+	test_assert_true(test, status == STATUS_ERR_INVALID_ARG,
+			"Failed to detect getting out of bounds sector protect");
+
+// Set out of bounds sector protect
+	status = at25dfx_chip_set_sector_protect(&at25dfx_chip, TEST_FLASH_SIZE, true);
+	test_assert_true(test, status == STATUS_ERR_INVALID_ARG,
+			"Failed to detect setting out of bounds sector protect");
+
+// Get sector protect of first and last sector
+	status = at25dfx_chip_get_sector_protect(&at25dfx_chip, 0, &protect_1);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to get first sector protect");
+
+	status = at25dfx_chip_get_sector_protect(&at25dfx_chip, TEST_FLASH_SIZE - 1, &protect_2);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to get last sector protect");
+
+	test_assert_true(test,
+			(protect_1 == false)
+			&& (protect_2 == false),
+			"Verification of sector protect getting failed");
+
+// Set and clear sector protect of first sector
+	status = at25dfx_chip_set_sector_protect(&at25dfx_chip, 0, true);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to set first sector protect");
+
+	status = at25dfx_chip_set_sector_protect(&at25dfx_chip, 0, false);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to clear first sector protect");
+
+// Set sector protect of last sector
+	status = at25dfx_chip_set_sector_protect(&at25dfx_chip, TEST_FLASH_SIZE - 1, true);
+	test_assert_true(test, status == STATUS_OK,
+			"Failed to set last sector protect");
+
+// Get sector protects and verify 
+	at25dfx_chip_get_sector_protect(&at25dfx_chip, 0, &protect_1);
+	at25dfx_chip_get_sector_protect(&at25dfx_chip, TEST_FLASH_SIZE - 1, &protect_2);
+
+	test_assert_true(test, protect_1 == false,
+			"Verification of sector protect clear failed");
+	test_assert_true(test, protect_2 == true,
+			"Verification of sector protect set failed");
+}
+
+static void run_sleep_wake_test(const struct test_case *test)
+{
+	// Globally disable sector protect
+	at25dfx_chip_set_global_sector_protect(&at25dfx_chip, false);
+
+	// Erase first block
+	at25dfx_chip_erase_block(&at25dfx_chip, 0, AT25DFX_BLOCK_SIZE_4KB);
+	at25dfx_chip_write_buffer(&at25dfx_chip, 0, &test_tx_buffer[0], 1);
+
+	// Put device to sleep
+	at25dfx_chip_sleep(&at25dfx_chip);
+
+	// Read out first byte, verify device did not respond
+	at25dfx_chip_read_buffer(&at25dfx_chip, 0, &test_rx_buffer[0], 1);
+	test_assert_true(test, test_rx_buffer[0] == 0,
+			"Verification of read during sleep failed");
+
+	// Wake device up
+	at25dfx_chip_wake(&at25dfx_chip);
+
+	// Redo test, verify device response
+	at25dfx_chip_read_buffer(&at25dfx_chip, 0, &test_rx_buffer[0], 1);
+	test_assert_true(test, test_rx_buffer[0] == test_tx_buffer[0],
+			"Verification of read during wake failed");
+}
+
+//@}
+
+int main(void)
+{
+	system_init();
+	cdc_uart_init();
+	test_at25dfx_init();
+
+	DEFINE_TEST_CASE(check_presence_test, NULL,
+			run_check_presence_test, NULL,
+			"Testing presence checking");
+
+	DEFINE_TEST_CASE(read_write_buffer_test, NULL,
+			run_read_write_buffer_test, NULL,
+			"Testing read and write");
+
+	DEFINE_TEST_CASE(erase_test, NULL,
+			run_erase_test, NULL,
+			"Testing chip erase");
+
+	DEFINE_TEST_CASE(erase_block_test, NULL,
+			run_erase_block_test, NULL,
+			"Testing block erase");
+
+	DEFINE_TEST_CASE(global_sector_protect_test, NULL,
+			run_global_sector_protect_test, NULL,
+			"Testing global sector protect setting");
+
+	DEFINE_TEST_CASE(set_get_sector_protect_test, NULL,
+			run_set_get_sector_protect_test, NULL,
+			"Testing sector protect setting and getting");
+
+	DEFINE_TEST_CASE(sleep_wake_test, NULL,
+			run_sleep_wake_test, NULL,
+			"Testing sleep and wake");
+
+	DEFINE_TEST_ARRAY(at25dfx_tests) = {
+		&check_presence_test,
+		&read_write_buffer_test,
+		&erase_test,
+		&erase_block_test,
+		&global_sector_protect_test,
+		&set_get_sector_protect_test,
+		&sleep_wake_test,
+	};
+
+	DEFINE_TEST_SUITE(at25dfx_test_suite, at25dfx_tests,
+			"AT25DFx driver test suite");
+
+	test_suite_run(&at25dfx_test_suite);
+
+	while (true) {
+		/* Intentionally left empty */
+	}
+}
diff --git a/common2/components/memory/serial_flash/mx25l/doxygen/common2.components.memory.serial_flash.mx25l/doxyfile.doxygen b/common2/components/memory/serial_flash/mx25l/doxygen/common2.components.memory.serial_flash.mx25l/doxyfile.doxygen
new file mode 100644
index 00000000..76eeeffa
--- /dev/null
+++ b/common2/components/memory/serial_flash/mx25l/doxygen/common2.components.memory.serial_flash.mx25l/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "MX25L Serial Flash"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../mx25l.c ../../mx25l.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 __SAMR21E18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/serial_flash/mx25l/doxygen/common2.components.memory.serial_flash.mx25l/doxygen_module_mainpage.h b/common2/components/memory/serial_flash/mx25l/doxygen/common2.components.memory.serial_flash.mx25l/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/components/memory/serial_flash/mx25l/doxygen/common2.components.memory.serial_flash.mx25l/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/components/memory/serial_flash/mx25l/mx25l.c b/common2/components/memory/serial_flash/mx25l/mx25l.c
new file mode 100644
index 00000000..040d7a6b
--- /dev/null
+++ b/common2/components/memory/serial_flash/mx25l/mx25l.c
@@ -0,0 +1,731 @@
+/**
+ * \file
+ *
+ * \brief Management of the Serial Flash MX25L driver through SPI.
+ * This file manages the access to the Serial Flash MX25L components.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "mx25l.h"
+
+#if SAM_PART_IS_DEFINED(SAMR21E18A) || defined(__DOXYGEN__)
+/** \name MX25L2006E Pin Connection in ATSAMR21B18-MZ210PA
+ * @{
+ */
+#  define MX25L_SPI                SERCOM3
+#  define MX25L_SPI_PIN_SI         PIN_PA25
+#  define MX25L_SPI_PIN_SO         PIN_PA24
+#  define MX25L_SPI_PIN_SCLK       PIN_PA28
+#  define MX25L_SPI_PIN_CS         PIN_PA27
+#  define MX25L_SPI_PINMUX_SI      PINMUX_PA25C_SERCOM3_PAD3
+#  define MX25L_SPI_PINMUX_SO      PINMUX_PA24C_SERCOM3_PAD2
+#  define MX25L_SPI_PINMUX_SCLK    PINMUX_PA28F_SERCOM3_PAD1
+#  define MX25L_SPI_PINMUX_CS      PINMUX_UNUSED
+#  define MX25L_SPI_MUX_SETTING    SPI_SIGNAL_MUX_SETTING_K
+
+/* @} */
+#else
+#  error This Serial Flash is not supported by the driver.
+#endif
+
+/** \name MX25L Command HEX Code Definition
+ * @{
+ */
+ /** RDID (Read Identification) */
+#define MX25L_CMD_RDID         0x9F
+/** RES (Read Electronic ID) */
+#define MX25L_CMD_RES          0xAB
+/** REMS (Read Electronic & Device ID) */
+#define MX25L_CMD_REMS         0x90
+
+/** WRSR (Write Status Register) */
+#define MX25L_CMD_WRSR         0x01
+/** RDSR (Read Status Register) */
+#define MX25L_CMD_RDSR         0x05
+
+/** READ (1 x I/O) */
+#define MX25L_CMD_READ         0x03
+/** FAST READ (Fast read data) */
+#define MX25L_CMD_FASTREAD     0x0B
+/** DREAD (1In/2 Out fast read) */
+#define MX25L_CMD_DREAD        0x3B
+
+/** WREN (Write Enable) */
+#define MX25L_CMD_WREN         0x06
+/** WRDI (Write Disable) */
+#define MX25L_CMD_WRDI         0x04
+/** PP (page program) */
+#define MX25L_CMD_PP           0x02
+
+/** SE (Sector Erase) */
+#define MX25L_CMD_SE           0x20
+/** BE (Block Erase) */
+#define MX25L_CMD_BE           0xD8
+/** CE (Chip Erase) hex code: 60 or C7 */
+#define MX25L_CMD_CE           0x60
+
+/** DP (Deep Power Down) */
+#define MX25L_CMD_DP           0xB9
+/** RDP (Release form Deep Power Down) */
+#define MX25L_CMD_RDP          0xAB
+/* @} */
+
+/** Timeout value for waiting write operation done. */
+#define MX25L_WAIT_TIMEOUT    50000000
+
+/** SPI instance. */
+struct spi_module _mx25l_spi;
+
+/** \name Internal Functions
+ * @{
+ */
+
+/**
+ * \brief Select the chip.
+ *
+ * This function selects the specified chip by driving its CS line low.
+ */
+static inline void _mx25l_chip_select(void)
+{
+	port_pin_set_output_level(MX25L_SPI_PIN_CS, false);
+}
+
+/**
+ * \brief Deselect the chip.
+ *
+ * This function deselects the specified chip by driving its CS line high.
+ */
+static inline void _mx25l_chip_deselect(void)
+{
+	port_pin_set_output_level(MX25L_SPI_PIN_CS, true);
+}
+
+/**
+ * \brief Send command to set or reset WEL bit.
+ *
+ * The WREN instruction is for setting Write Enable Latch (WEL) bit.
+ * The WRDI instruction is to reset Write Enable Latch (WEL) bit.
+ *
+ * \param[in] cmd WREN or WRDI command
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+static enum status_code _mx25l_send_cmd_write_latch(uint8_t cmd)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {cmd};
+
+	_mx25l_chip_select();
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	_mx25l_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Check if Serial Flash in busy.
+ *
+ * \return true or false.
+ * \retval true   Busy (WIP bit = 1)
+ * \retval false  Ready (WIP bit = 0)
+ */
+static bool _mx25l_is_flash_busy(void)
+{
+	uint8_t mx25_status;
+
+	mx25l_read_status(&mx25_status);
+	if (mx25_status & MX25L_STATUS_WIP) {
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/**
+ * \brief Wait Serial Flash ready with timeout.
+ *
+ * \param[in] timeout Time to wait
+ *
+ * \return true or false.
+ * \retval true   Flash is ready
+ * \retval false  flash is time-out
+ */
+static bool _mx25l_wait_flash_ready(uint32_t timeout)
+{
+	while (1) {
+		if (_mx25l_is_flash_busy()) {
+			if (timeout) {
+				timeout--;
+			}
+			if (timeout == 0) {
+				return false;
+			}
+		} else {
+			break;
+		}
+	}
+
+	return true;
+}
+
+/* @} */
+
+/**
+ * \brief Initialize chip driver instance.
+ *
+ * This function initializes a chip instance and associates it with a specified
+ * SPI instance.
+ *
+ * \param[in] config Pointer to the configuration for the SPI interface.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25l_init(struct mx25l_spi_config *const config)
+{
+	enum status_code status;
+
+	/* Initialize SPI interface */
+	struct spi_config spi_conf;
+
+	spi_get_config_defaults(&spi_conf);
+	spi_conf.transfer_mode = config->spi_transfer_mode;
+	spi_conf.mode_specific.master.baudrate = config->spi_baudrate;
+	spi_conf.mux_setting = MX25L_SPI_MUX_SETTING;
+	spi_conf.pinmux_pad0 = MX25L_SPI_PINMUX_SI;
+	spi_conf.pinmux_pad1 = MX25L_SPI_PINMUX_CS;
+	spi_conf.pinmux_pad2 = MX25L_SPI_PINMUX_SO;
+	spi_conf.pinmux_pad3 = MX25L_SPI_PINMUX_SCLK;
+
+	status = spi_init(&_mx25l_spi, MX25L_SPI, &spi_conf);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	spi_enable(&_mx25l_spi);
+
+	/* Initialize CS pin */
+	struct port_config pin_conf;
+	port_get_config_defaults(&pin_conf);
+
+	pin_conf.direction  = PORT_PIN_DIR_OUTPUT;
+	port_pin_set_config(MX25L_SPI_PIN_CS, &pin_conf);
+	port_pin_set_output_level(MX25L_SPI_PIN_CS, true);
+
+	return STATUS_OK;
+};
+
+/**
+ * \brief Read Serial Flash identification.
+ * Read ID information with command RDID, RES and REMS.
+ *
+ * \param[out] id Pointer to Serial Flash id struct
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25l_read_id(struct mx25l_id *id)
+{
+	enum status_code status;
+	uint8_t tx_buf[4] = {0, 0, 0, 0};
+	uint8_t rx_buf[3];
+
+	/* Read RDID */
+	_mx25l_chip_select();
+	tx_buf[0] = MX25L_CMD_RDID;
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	status = spi_read_buffer_wait(&_mx25l_spi, rx_buf, 3, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	id->manufacturer_id = rx_buf[0];
+	id->memory_type = rx_buf[1];
+	id->memroy_density = rx_buf[2];
+	_mx25l_chip_deselect();
+
+	/* Read RES */
+	_mx25l_chip_select();
+	tx_buf[0] = MX25L_CMD_RES; /* 1 byte cmd + 3 bytes dummy data */
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	status = spi_read_buffer_wait(&_mx25l_spi, rx_buf, 1, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	id->electronic_id = rx_buf[0];
+	_mx25l_chip_deselect();
+
+	/* Read REMS */
+	_mx25l_chip_select();
+	tx_buf[0] = MX25L_CMD_REMS;
+	tx_buf[3] = 0; /* ADD = 0 */
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	status = spi_read_buffer_wait(&_mx25l_spi, rx_buf, 2, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	} 
+	id->device_id = rx_buf[1];
+	_mx25l_chip_deselect();
+
+	return STATUS_OK;
+};
+
+/**
+ * \brief Read Status Register.
+ *
+ * The RDSR instruction is for reading Status Register Bits.
+ *
+ * \param[out] value Pointer to status buffer
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25l_read_status(uint8_t *value)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {MX25L_CMD_RDSR};
+
+	_mx25l_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	status = spi_read_buffer_wait(&_mx25l_spi, value, 1, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25l_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Write Status Register.
+ *
+ * The WRSR instruction is for changing the values of Status Register Bits
+ * (and configuration register).
+ *
+ * \param[out] value Value to be write
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25l_write_status(uint8_t value)
+{
+	enum status_code status;
+	uint8_t tx_buf[2] = {MX25L_CMD_WRSR, value};
+
+	if (_mx25l_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	_mx25l_send_cmd_write_latch(MX25L_CMD_WREN);
+
+	_mx25l_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 2);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25l_chip_deselect();
+
+	if (!_mx25l_wait_flash_ready(MX25L_WAIT_TIMEOUT)) {
+		return STATUS_ERR_IO;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Read data from Serial Flash device.
+ *
+ * This function reads data from the Serial Flash device, into a buffer.
+ *
+ * \param[in] address SerialFlash internal address to start reading from
+ * \param[out] data  Buffer to write data into
+ * \param[in] length Number of bytes to read
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_ERR_INVALID_ARG if address and/or length is out of bounds
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25l_read_buffer(uint32_t address, void *data, uint32_t length)
+{
+	enum status_code status;
+	uint8_t tx_buf[4] = {
+		MX25L_CMD_READ,
+		(uint8_t)(address >> 16),
+		(uint8_t)(address >> 8),
+		(uint8_t)(address)
+	};
+
+	Assert(data);
+
+	if ((address + length) > MX25L_FLASH_SIZE) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	_mx25l_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	status = spi_read_buffer_wait(&_mx25l_spi, data, length, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25l_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Write data to Serial Flash device.
+ *
+ * This function writes data to the Serial Flash device, from a buffer.
+ *
+ * \note Please erase related memory area before write operation.
+ *
+ * \param[in] address SerialFlash internal address to start writing to
+ * \param[in] data    Buffer to read data from
+ * \param[in] length  Number of bytes to write
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_ERR_INVALID_ARG if address and/or length is out of bounds
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25l_write_buffer(uint32_t address, const void *data, uint32_t length)
+{
+	enum status_code status;
+	uint32_t write_address;
+	uint32_t write_length;
+	uint8_t *data_wr = (uint8_t *)data;
+	uint8_t tx_buf[4] = {MX25L_CMD_PP};
+
+	Assert(data);
+
+	if ((address + length) > MX25L_FLASH_SIZE) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	if (_mx25l_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	write_address = address;
+	write_length = MX25L_PAGE_SIZE - (address % MX25L_PAGE_SIZE);
+	if (write_length) {
+		_mx25l_send_cmd_write_latch(MX25L_CMD_WREN);
+		_mx25l_chip_select();
+
+		/* Write page program command */
+		tx_buf[1] = (uint8_t)(write_address >> 16);
+		tx_buf[2] = (uint8_t)(write_address >> 8);
+		tx_buf[3] = (uint8_t)(write_address);
+		status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 4);
+		if (status != STATUS_OK) {
+			return STATUS_ERR_IO;
+		}
+
+		/* Write page data into flash */
+		status = spi_write_buffer_wait(&_mx25l_spi, data_wr, write_length);
+		if (status != STATUS_OK) {
+			return STATUS_ERR_IO;
+		}
+
+		_mx25l_chip_deselect();
+
+		if (!_mx25l_wait_flash_ready(MX25L_WAIT_TIMEOUT)) {
+			return STATUS_ERR_IO;
+		}
+
+		write_address += write_length;
+		data_wr += write_length;
+		length -= write_length;
+	}
+
+	while (length) {
+		write_length = min(MX25L_PAGE_SIZE, length);
+		_mx25l_send_cmd_write_latch(MX25L_CMD_WREN);
+		_mx25l_chip_select();
+
+		/* Write page program command */
+		tx_buf[1] = (uint8_t)(write_address >> 16);
+		tx_buf[2] = (uint8_t)(write_address >> 8);
+		tx_buf[3] = (uint8_t)(write_address);
+		status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 4);
+		if (status != STATUS_OK) {
+			return STATUS_ERR_IO;
+		}
+
+		/* Write page data into flash */
+		status = spi_write_buffer_wait(&_mx25l_spi, data_wr, write_length);
+		if (status != STATUS_OK) {
+			return STATUS_ERR_IO;
+		}
+
+		_mx25l_chip_deselect();
+
+		if (!_mx25l_wait_flash_ready(MX25L_WAIT_TIMEOUT)) {
+			return STATUS_ERR_IO;
+		}
+
+		write_address += write_length;
+		data_wr += write_length;
+		length -= write_length;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Erase sector of Serial Flash device.
+ *
+ * The SE instruction is for erasing the data of the chosen
+ * sector (4KB) to be "1".
+ *
+ * \param[in] address Serial flash internal address in the sector
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25l_erase_sector(uint32_t address) //do we have to dispose the address?
+{
+	enum status_code status;
+	uint8_t tx_buf[4] = {
+		MX25L_CMD_SE,
+		(uint8_t)(address >> 16),
+		(uint8_t)(address >> 8),
+		(uint8_t)(address)
+	};
+
+	if ((address) >= MX25L_FLASH_SIZE) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	if (_mx25l_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	_mx25l_send_cmd_write_latch(MX25L_CMD_WREN);
+	_mx25l_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25l_chip_deselect();
+
+	if (!_mx25l_wait_flash_ready(MX25L_WAIT_TIMEOUT)) {
+		return STATUS_ERR_IO;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Erase block of Serial Flash device.
+ *
+ * The BE instruction is for erasing the data of the chosen
+ * sector (64KB) to be "1".
+ *
+ * \param[in] address Serial flash internal address in the block
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25l_erase_block(uint32_t address)
+{
+	enum status_code status;
+	uint8_t tx_buf[4] = {
+		MX25L_CMD_BE,
+		(uint8_t)(address >> 16),
+		(uint8_t)(address >> 8),
+		(uint8_t)(address)
+	};
+
+	if ((address) >= MX25L_FLASH_SIZE) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	if (_mx25l_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	_mx25l_send_cmd_write_latch(MX25L_CMD_WREN);
+	_mx25l_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25l_chip_deselect();
+
+	if (!_mx25l_wait_flash_ready(MX25L_WAIT_TIMEOUT)) {
+		return STATUS_ERR_IO;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Erase all chip of Serial Flash device.
+ *
+ * The CE instruction is for erasing the data of the whole chip to be "1".
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25l_erase_chip(void)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {MX25L_CMD_CE};
+
+	if (_mx25l_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	_mx25l_send_cmd_write_latch(MX25L_CMD_WREN);
+	_mx25l_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25l_chip_deselect();
+
+	if (!_mx25l_wait_flash_ready(MX25L_WAIT_TIMEOUT)) {
+		return STATUS_ERR_IO;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Enter deep power down mode.
+ *
+ * The DP instruction is for setting the device on the minimizing
+ * the power consumption.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25l_enter_deep_powerdown(void)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {MX25L_CMD_DP};
+
+	_mx25l_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25l_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Exit deep power down mode.
+ *
+ * The Release from RDP instruction is putting the device in the
+ * Stand-by Power mode.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25l_exit_deep_powerdown(void)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {MX25L_CMD_RDP};
+
+	_mx25l_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25l_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25l_chip_deselect();
+
+	return STATUS_OK;
+}
diff --git a/common2/components/memory/serial_flash/mx25l/mx25l.h b/common2/components/memory/serial_flash/mx25l/mx25l.h
new file mode 100644
index 00000000..bfbb5189
--- /dev/null
+++ b/common2/components/memory/serial_flash/mx25l/mx25l.h
@@ -0,0 +1,312 @@
+/**
+ * \file
+ *
+ * \brief API driver for Serial Flash MX25L (Known Good Die) in SAM device.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef MX25L_H_INCLUDED
+#define MX25L_H_INCLUDED
+
+/**
+ * \defgroup asfdoc_common2_mx25l_group MX25L Serial Flash Driver
+ *
+ * This driver provides an interface for basic usage of MX25L Serial Flash
+ * devices, i.e., initialization, data read/write, block protection, 
+ * device ID read, enter or exit deep power mode etc.
+ *
+ * SPI polling mode is used in this driver.
+ *
+ * Boards can use this module:
+ * - ATSAMR21B18-MZ210PA
+ *
+ * The following peripherals are used by this module:
+ * - SERCOM SPI (data transfer)
+ * - PORT (chip selection)
+ *
+ * For quick start guide related to this driver, see
+ * \ref asfdoc_common2_mx25l_exqsg.
+ *
+ * \section asfdoc_common2_mx25l_api_overview API Overview
+ *
+ * @{
+ */
+
+#include "compiler.h"
+#include "spi.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if SAM_PART_IS_DEFINED(SAMR21E18A) || defined(__DOXYGEN__)
+/**
+ * \name MX25L2006E Related Parameter Definition
+ * @{
+ */
+#  define MX25L_FLASH_SIZE   0x40000  /**< Flash size 256 KB */
+#  define MX25L_BLOCK_SIZE   0x10000  /**< 64K block size */
+#  define MX25L_SECTOR_SIZE  0x1000   /**< 4K sector size */
+#  define MX25L_PAGE_SIZE    0x0100   /**< 256 byte page size */
+
+#  define MX25L_BLOCK_NUM    (MX25L_FLASH_SIZE / MX25L_BLOCK_SIZE)
+#  define MX25L_SECTOR_NUM   (MX25L_FLASH_SIZE / MX25L_SECTOR_SIZE)
+#  define MX25L_PAGE_NUM     (MX25L_FLASH_SIZE / MX25L_PAGE_SIZE)
+/* @} */
+#else
+#  error This Serial Flash is not supported by the driver.
+#endif
+
+/**
+ * \name Bit Mask Definition for Status Register
+ * @{
+ */
+/** The Write in Progress (WIP) bit */
+#define MX25L_STATUS_WIP    (0x01 << 0)
+/** The Write Enable Latch (WEL) bit */
+#define MX25L_STATUS_WEL    (0x01 << 1)
+/** The Block Protect BP0 bit */
+#define MX25L_STATUS_BP0    (0x01 << 2)
+/** The Block Protect BP1 bit */
+#define MX25L_STATUS_BP1    (0x01 << 3)
+/** The Status Register Write Disable (SRWD) bit */
+#define MX25L_STATUS_SRWD   (0x01 << 7)
+/* @} */
+
+ /**
+ * \name Protect Level for Status register
+ * @{
+ */
+/** The protect level 0 */
+#define MX25L_STATUS_PROTECT_LEVEL_0    (0x00 << 2)
+/** The protect level 1 */
+#define MX25L_STATUS_PROTECT_LEVEL_1    (0x01 << 2)
+/** The protect level 2 */
+#define MX25L_STATUS_PROTECT_LEVEL_2    (0x02 << 2)
+/** The protect level 3 */
+#define MX25L_STATUS_PROTECT_LEVEL_3    (0x03 << 2)
+/** The protect level mask */
+#define MX25L_STATUS_PROTECT_LEVEL_MASK (0x03 << 2)
+/* @} */
+
+/** SPI interface configuration for Serial Flash. */
+struct mx25l_spi_config {
+	/** SPI transfer mode: Mode 0 and Mode 3 are supported */
+	enum spi_transfer_mode spi_transfer_mode;
+	/** SPI baudrate of serial clock */
+	uint32_t spi_baudrate;
+};
+
+/** Serial Flash identification. */
+struct mx25l_id {
+	/** Manufacturer ID */
+	uint8_t manufacturer_id;
+	/** Memory type */
+	uint8_t memory_type;
+	/** Density ID */
+	uint8_t memroy_density;
+	/** Electronic ID */
+	uint8_t electronic_id;
+	/** Device ID */
+	uint8_t device_id;
+};
+
+/**
+ * \name Initialization
+ * @{
+ */
+/**
+ * \brief Get default SPI interface configuration.
+ *
+ * This function initializes the SPI configuration struct with default settings
+ * that should work with Serial Flash devices.
+ *
+ * The default configuration is as follows:
+ *  \li Transfer mode 0
+ *  \li Baudrate 100000
+ *
+ * \param[out] config Address of config struct to initialize
+ */
+static inline void mx25l_spi_get_config_defaults(
+		struct mx25l_spi_config *const config)
+{
+	config->spi_transfer_mode = SPI_TRANSFER_MODE_0;
+	config->spi_baudrate = 100000;
+}
+
+enum status_code mx25l_init(struct mx25l_spi_config *const config);
+/* @} */
+
+/**
+ * \name Read Device ID
+ * @{
+ */
+enum status_code mx25l_read_id(struct mx25l_id *id);
+/* @} */
+
+/**
+ * \name Read/Write Status Register
+ * @{
+ */
+enum status_code mx25l_read_status(uint8_t *value);
+enum status_code mx25l_write_status(uint8_t value);
+/* @} */
+
+/**
+ * \name Read/Write Data
+ * @{
+ */
+enum status_code mx25l_read_buffer(uint32_t address,
+		void *data, uint32_t length);
+enum status_code mx25l_write_buffer(uint32_t address,
+		const void *data, uint32_t length);
+/* @} */
+
+/**
+ * \name Erase Sector/Block/Chip
+ * @{
+ */
+enum status_code mx25l_erase_sector(uint32_t address);
+enum status_code mx25l_erase_block(uint32_t address);
+enum status_code mx25l_erase_chip(void);
+/* @} */
+
+/**
+ * \name Enter/Exit Deep Power Down
+ * @{
+ */
+enum status_code mx25l_enter_deep_powerdown(void);
+enum status_code mx25l_exit_deep_powerdown(void);
+/* @} */
+
+#ifdef __cplusplus
+}
+#endif
+/** @} */
+
+/**
+ * \page asfdoc_common2_mx25l_exqsg Quick Start Guide for MX25L Driver
+ *
+ * This is the quick start guide for the \ref asfdoc_common2_mx25l_group, with
+ * step-by-step instructions on how to configure and use the driver for
+ * a specific use case. The code examples can be copied into the main
+ * application loop or any other function that will need to control the
+ * MX25L module.
+ *
+ * \section asfdoc_common2_mx25l_qsg_use_cases Use Cases
+ * - \ref asfdoc_common2_mx25l_qsg_basic
+ *
+ * \section asfdoc_common2_mx25l_qsg_basic Basic Usage of MX25L Driver
+ *
+ * This use case will demonstrate:
+ * * How to initialize the MX25L module with SPI interface
+ * * Read device ID
+ * * Basic erase, read, and write functions
+ *
+ * \section asfdoc_common2_mx25l_qsg_basic_setup Setup Steps
+ *
+ * \subsection asfdoc_common2_mx25l_qsg_basic_prereq Prerequisites
+ *
+ * There are no special setup requirements for this use-case.
+ *
+ * \subsection asfdoc_common2_mx25l_qsg_basic_setup_code Setup Code
+ *
+ * Add this to the main application source file, outside of any functions:
+ * \code
+	#define TEST_ADDR    0
+
+	struct mx25l_id mx25l_id;
+	uint8_t mx25l_rd_buf[MX25L_PAGE_SIZE];
+	uint8_t mx25l_wr_buf[MX25L_PAGE_SIZE];
+ * \endcode
+ *
+ * Add setup code to your main application C-file (typically the start of \c main()):
+ * \code
+	struct mx25l_spi_config spi_config;
+	enum status_code status;
+
+	system_init();
+
+	mx25l_spi_get_config_defaults(&spi_config);
+	status = mx25l_init(&spi_config);
+ * \endcode
+ *
+ * \subsection asfdoc_common2_mx25l_qsg_basic_capture_setup_workflow Workflow
+ *
+ * -# Exit from deep power down mode
+ *  \code status = mx25l_exit_deep_powerdown(); \endcode
+ * -# Read Device ID
+ *  \code
+	status = mx25l_read_id(&mx25l_id);
+ *  \endcode
+ * -# Read a number of data from a specific address
+ *  \code
+	status = mx25l_read_buffer(TEST_ADDR, mx25l_rd_buf, MX25L_PAGE_SIZE);
+ *  \endcode
+ * -# Erase sector
+ *  \code
+	status = mx25l_erase_sector(TEST_ADDR);
+ *  \endcode
+ *
+ *  More erase functions:
+ *  \code
+	status = mx25l_erase_block(TEST_ADDR);
+	status = mx25l_erase_chip();
+ *  \endcode
+ * -# Write a number of data to a specific address
+ *  \code
+	for (i = 0 ; i < MX25L_PAGE_SIZE; i++) {
+		mx25l_wr_buf[i] = i;
+	}
+
+	status = mx25l_write_buffer(TEST_ADDR, mx25l_wr_buf, MX25L_PAGE_SIZE);
+ *  \endcode
+ * -# Enter deep power down mode
+ *  \code status = mx25l_enter_deep_powerdown(); \endcode
+ * -# Enter infinite loop
+ *  \code
+	while (1) {
+	};
+ *  \endcode
+ */
+
+#endif /* MX25L_H_INCLUDED */
diff --git a/common2/components/memory/serial_flash/mx25v/doxygen/common2.components.memory.serial_flash.mx25v/doxyfile.doxygen b/common2/components/memory/serial_flash/mx25v/doxygen/common2.components.memory.serial_flash.mx25v/doxyfile.doxygen
new file mode 100644
index 00000000..ef8b4201
--- /dev/null
+++ b/common2/components/memory/serial_flash/mx25v/doxygen/common2.components.memory.serial_flash.mx25v/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "MX25V Serial Flash (Known Good Die)"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../mx25v.c ../../mx25v.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 __SAMR21E19A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/components/memory/serial_flash/mx25v/doxygen/common2.components.memory.serial_flash.mx25v/doxygen_module_mainpage.h b/common2/components/memory/serial_flash/mx25v/doxygen/common2.components.memory.serial_flash.mx25v/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/components/memory/serial_flash/mx25v/doxygen/common2.components.memory.serial_flash.mx25v/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/components/memory/serial_flash/mx25v/mx25v.c b/common2/components/memory/serial_flash/mx25v/mx25v.c
new file mode 100644
index 00000000..65a85b1d
--- /dev/null
+++ b/common2/components/memory/serial_flash/mx25v/mx25v.c
@@ -0,0 +1,775 @@
+/**
+ * \file
+ *
+ * \brief Management of the Serial Flash MX25V driver through SPI.
+ * This file manages the access to the Serial Flash MX25V components.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "mx25v.h"
+
+
+#if SAM_PART_IS_DEFINED(SAMR21E19A) || defined(__DOXYGEN__)
+/** \name MX25V4006E Pin Connection in SAMR21E19
+ * @{
+ */
+#  define MX25V_SPI                SERCOM5
+#  define MX25V_SPI_PIN_SI         PIN_PA22
+#  define MX25V_SPI_PIN_SO         PIN_PB22
+#  define MX25V_SPI_PIN_SCLK       PIN_PB23
+#  define MX25V_SPI_PIN_CS         PIN_PA23
+#  define MX25V_SPI_PINMUX_SI      PINMUX_PA22D_SERCOM5_PAD0
+#  define MX25V_SPI_PINMUX_SO      PINMUX_PB22D_SERCOM5_PAD2
+#  define MX25V_SPI_PINMUX_SCLK    PINMUX_PB23D_SERCOM5_PAD3
+#  define MX25V_SPI_PINMUX_CS      PINMUX_PA23D_SERCOM5_PAD1
+#  define MX25V_SPI_MUX_SETTING    SPI_SIGNAL_MUX_SETTING_O
+
+#  define MX25V_PIN_HOLD           PIN_PA00
+#  define MX25V_PIN_WP             PIN_PA12
+/* @} */
+#else
+#  error This Serial Flash is not supported by the driver.
+#endif
+
+/** \name MX25V Command HEX Code Definition
+ * @{
+ */
+ /** RDID (Read Identification) */
+#define MX25V_CMD_RDID         0x9F
+/** RES (Read Electronic ID) */
+#define MX25V_CMD_RES          0xAB
+/** REMS (Read Electronic & Device ID) */
+#define MX25V_CMD_REMS         0x90
+
+/** WRSR (Write Status Register) */
+#define MX25V_CMD_WRSR         0x01
+/** RDSR (Read Status Register) */
+#define MX25V_CMD_RDSR         0x05
+
+/** READ (1 x I/O) */
+#define MX25V_CMD_READ         0x03
+/** FAST READ (Fast read data) */
+#define MX25V_CMD_FASTREAD     0x0B
+/** DREAD (1In/2 Out fast read) */
+#define MX25V_CMD_DREAD        0x3B
+/** RDSFDP (Read SFDP) */
+#define MX25V_CMD_RDSFDP       0x5A
+
+/** WREN (Write Enable) */
+#define MX25V_CMD_WREN         0x06
+/** WRDI (Write Disable) */
+#define MX25V_CMD_WRDI         0x04
+/** PP (page program) */
+#define MX25V_CMD_PP           0x02
+
+/** SE (Sector Erase) */
+#define MX25V_CMD_SE           0x20
+/** BE (Block Erase) */
+#define MX25V_CMD_BE           0xD8
+/** CE (Chip Erase) hex code: 60 or C7 */
+#define MX25V_CMD_CE           0x60
+
+/** DP (Deep Power Down) */
+#define MX25V_CMD_DP           0xB9
+/** RDP (Release form Deep Power Down) */
+#define MX25V_CMD_RDP          0xAB
+/* @} */
+
+/** Timeout value for waiting write operation done. */
+#define MX25V_WAIT_TIMEOUT    50000000
+
+/** SPI instance. */
+struct spi_module _mx25v_spi;
+
+/** \name Internal Functions
+ * @{
+ */
+
+/**
+ * \brief Select the chip.
+ *
+ * This function selects the specified chip by driving its CS line low.
+ */
+static inline void _mx25v_chip_select(void)
+{
+	port_pin_set_output_level(MX25V_SPI_PIN_CS, false);
+}
+
+/**
+ * \brief Deselect the chip.
+ *
+ * This function deselects the specified chip by driving its CS line high.
+ */
+static inline void _mx25v_chip_deselect(void)
+{
+	port_pin_set_output_level(MX25V_SPI_PIN_CS, true);
+}
+
+/**
+ * \brief Send command to set or reset WEL bit.
+ *
+ * The WREN instruction is for setting Write Enable Latch (WEL) bit.
+ * The WRDI instruction is to reset Write Enable Latch (WEL) bit.
+ *
+ * \param[in] cmd WREN or WRDI command
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+static enum status_code _mx25v_send_cmd_write_latch(uint8_t cmd)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {cmd};
+
+	_mx25v_chip_select();
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	_mx25v_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Check if Serial Flash in busy.
+ *
+ * \return true or false.
+ * \retval true   Busy (WIP bit = 1)
+ * \retval false  Ready (WIP bit = 0)
+ */
+static bool _mx25v_is_flash_busy(void)
+{
+	uint8_t mx25_status;
+
+	mx25v_read_status(&mx25_status);
+	if (mx25_status & MX25V_STATUS_WIP) {
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/**
+ * \brief Wait Serial Flash ready with timeout.
+ *
+ * \param[in] timeout Time to wait
+ *
+ * \return true or false.
+ * \retval true   Flash is ready
+ * \retval false  flash is time-out
+ */
+static bool _mx25v_wait_flash_ready(uint32_t timeout)
+{
+	while (1) {
+		if (_mx25v_is_flash_busy()) {
+			if (timeout) {
+				timeout--;
+			}
+			if (timeout == 0) {
+				return false;
+			}
+		} else {
+			break;
+		}
+	}
+
+	return true;
+}
+
+/* @} */
+
+/**
+ * \brief Initialize chip driver instance.
+ *
+ * This function initializes a chip instance and associates it with a specified
+ * SPI instance.
+ *
+ * \param[in] config Pointer to the configuration for the SPI interface.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25v_init(struct mx25v_spi_config *const config)
+{
+	enum status_code status;
+
+	/* Initialize SPI interface */
+	struct spi_config spi_conf;
+
+	spi_get_config_defaults(&spi_conf);
+	spi_conf.transfer_mode = config->spi_transfer_mode;
+	spi_conf.mode_specific.master.baudrate = config->spi_baudrate;
+	spi_conf.mux_setting = MX25V_SPI_MUX_SETTING;
+	spi_conf.pinmux_pad0 = MX25V_SPI_PINMUX_SI;
+	spi_conf.pinmux_pad1 = MX25V_SPI_PINMUX_CS;
+	spi_conf.pinmux_pad2 = MX25V_SPI_PINMUX_SO;
+	spi_conf.pinmux_pad3 = MX25V_SPI_PINMUX_SCLK;
+
+	status = spi_init(&_mx25v_spi, MX25V_SPI, &spi_conf);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	spi_enable(&_mx25v_spi);
+
+	/* Initialize HOLD, WP and CS pin */
+	struct port_config pin_conf;
+	port_get_config_defaults(&pin_conf);
+
+	pin_conf.direction  = PORT_PIN_DIR_OUTPUT;
+
+	port_pin_set_config(MX25V_PIN_HOLD, &pin_conf);
+	port_pin_set_output_level(MX25V_PIN_HOLD, true);
+
+	port_pin_set_config(MX25V_PIN_WP, &pin_conf);
+	port_pin_set_output_level(MX25V_PIN_WP, true);
+
+	port_pin_set_config(MX25V_SPI_PIN_CS, &pin_conf);
+	port_pin_set_output_level(MX25V_SPI_PIN_CS, true);
+
+	return STATUS_OK;
+};
+
+/**
+ * \brief Read Serial Flash identification.
+ * Read ID information with command RDID, RES and REMS.
+ *
+ * \param[out] id Pointer to Serial Flash id struct
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25v_read_id(struct mx25v_id *id)
+{
+	enum status_code status;
+	uint8_t tx_buf[4] = {0, 0, 0, 0};
+	uint8_t rx_buf[3];
+
+	/* Read RDID */
+	_mx25v_chip_select();
+	tx_buf[0] = MX25V_CMD_RDID;
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	status = spi_read_buffer_wait(&_mx25v_spi, rx_buf, 3, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	id->manufacturer_id = rx_buf[0];
+	id->memory_type = rx_buf[1];
+	id->memroy_density = rx_buf[2];
+	_mx25v_chip_deselect();
+
+	/* Read RES */
+	_mx25v_chip_select();
+	tx_buf[0] = MX25V_CMD_RES; /* 1 byte cmd + 3 bytes dummy data */
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	status = spi_read_buffer_wait(&_mx25v_spi, rx_buf, 1, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	id->electronic_id = rx_buf[0];
+	_mx25v_chip_deselect();
+
+	/* Read REMS */
+	_mx25v_chip_select();
+	tx_buf[0] = MX25V_CMD_REMS;
+	tx_buf[3] = 0; /* ADD = 0 */
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	status = spi_read_buffer_wait(&_mx25v_spi, rx_buf, 2, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+	id->device_id = rx_buf[1];
+	_mx25v_chip_deselect();
+
+	return STATUS_OK;
+};
+
+/**
+ * \brief Read Status Register.
+ *
+ * The RDSR instruction is for reading Status Register Bits.
+ *
+ * \param[out] value Pointer to status buffer
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25v_read_status(uint8_t *value)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {MX25V_CMD_RDSR};
+
+	_mx25v_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	status = spi_read_buffer_wait(&_mx25v_spi, value, 1, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25v_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Write Status Register.
+ *
+ * The WRSR instruction is for changing the values of Status Register Bits
+ * (and configuration register).
+ *
+ * \param[out] value Value to be write
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25v_write_status(uint8_t value)
+{
+	enum status_code status;
+	uint8_t tx_buf[2] = {MX25V_CMD_WRSR, value};
+
+	if (_mx25v_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	_mx25v_send_cmd_write_latch(MX25V_CMD_WREN);
+
+	_mx25v_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 2);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25v_chip_deselect();
+
+	if (!_mx25v_wait_flash_ready(MX25V_WAIT_TIMEOUT)) {
+		return STATUS_ERR_IO;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Read data from Serial Flash device.
+ *
+ * This function reads data from the Serial Flash device, into a buffer.
+ *
+ * \param[in] address SerialFlash internal address to start reading from
+ * \param[out] data  Buffer to write data into
+ * \param[in] length Number of bytes to read
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_ERR_INVALID_ARG if address and/or length is out of bounds
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25v_read_buffer(uint32_t address, void *data, uint32_t length)
+{
+	enum status_code status;
+	uint8_t tx_buf[4] = {
+		MX25V_CMD_READ,
+		(uint8_t)(address >> 16),
+		(uint8_t)(address >> 8),
+		(uint8_t)(address)
+	};
+
+	Assert(data);
+
+	if ((address + length) > MX25V_FLASH_SIZE) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	_mx25v_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	status = spi_read_buffer_wait(&_mx25v_spi, data, length, 0);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25v_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Write data to Serial Flash device.
+ *
+ * This function writes data to the Serial Flash device, from a buffer.
+ *
+ * \note Please erase related memory area before write operation.
+ *
+ * \param[in] address SerialFlash internal address to start writing to
+ * \param[in] data    Buffer to read data from
+ * \param[in] length  Number of bytes to write
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_ERR_INVALID_ARG if address and/or length is out of bounds
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25v_write_buffer(uint32_t address, const void *data, uint32_t length)
+{
+	enum status_code status;
+	uint32_t write_address;
+	uint32_t write_length;
+	uint8_t *data_wr = (uint8_t *)data;
+	uint8_t tx_buf[4] = {MX25V_CMD_PP};
+
+	Assert(data);
+
+	if ((address + length) > MX25V_FLASH_SIZE) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	if (_mx25v_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	write_address = address;
+	write_length = MX25V_PAGE_SIZE - (address % MX25V_PAGE_SIZE);
+	if (write_length) {
+		_mx25v_send_cmd_write_latch(MX25V_CMD_WREN);
+		_mx25v_chip_select();
+
+		/* Write page program command */
+		tx_buf[1] = (uint8_t)(write_address >> 16);
+		tx_buf[2] = (uint8_t)(write_address >> 8);
+		tx_buf[3] = (uint8_t)(write_address);
+		status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 4);
+		if (status != STATUS_OK) {
+			return STATUS_ERR_IO;
+		}
+
+		/* Write page data into flash */
+		status = spi_write_buffer_wait(&_mx25v_spi, data_wr, write_length);
+		if (status != STATUS_OK) {
+			return STATUS_ERR_IO;
+		}
+
+		_mx25v_chip_deselect();
+
+		if (!_mx25v_wait_flash_ready(MX25V_WAIT_TIMEOUT)) {
+			return STATUS_ERR_IO;
+		}
+
+		write_address += write_length;
+		data_wr += write_length;
+		length -= write_length;
+	}
+
+	while (length) {
+		write_length = min(MX25V_PAGE_SIZE, length);
+		_mx25v_send_cmd_write_latch(MX25V_CMD_WREN);
+		_mx25v_chip_select();
+
+		/* Write page program command */
+		tx_buf[1] = (uint8_t)(write_address >> 16);
+		tx_buf[2] = (uint8_t)(write_address >> 8);
+		tx_buf[3] = (uint8_t)(write_address);
+		status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 4);
+		if (status != STATUS_OK) {
+			return STATUS_ERR_IO;
+		}
+
+		/* Write page data into flash */
+		status = spi_write_buffer_wait(&_mx25v_spi, data_wr, write_length);
+		if (status != STATUS_OK) {
+			return STATUS_ERR_IO;
+		}
+
+		_mx25v_chip_deselect();
+
+		if (!_mx25v_wait_flash_ready(MX25V_WAIT_TIMEOUT)) {
+			return STATUS_ERR_IO;
+		}
+
+		write_address += write_length;
+		data_wr += write_length;
+		length -= write_length;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Erase sector of Serial Flash device.
+ *
+ * The SE instruction is for erasing the data of the chosen
+ * sector (4KB) to be "1".
+ *
+ * \param[in] address Serial flash internal address in the sector
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25v_erase_sector(uint32_t address)
+{
+	enum status_code status;
+	uint8_t tx_buf[4] = {
+		MX25V_CMD_SE,
+		(uint8_t)(address >> 16),
+		(uint8_t)(address >> 8),
+		(uint8_t)(address)
+	};
+
+	if ((address) >= MX25V_FLASH_SIZE) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	if (_mx25v_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	_mx25v_send_cmd_write_latch(MX25V_CMD_WREN);
+	_mx25v_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25v_chip_deselect();
+
+	if (!_mx25v_wait_flash_ready(MX25V_WAIT_TIMEOUT)) {
+		return STATUS_ERR_IO;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Erase block of Serial Flash device.
+ *
+ * The BE instruction is for erasing the data of the chosen
+ * sector (64KB) to be "1".
+ *
+ * \param[in] address Serial flash internal address in the block
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25v_erase_block(uint32_t address)
+{
+	enum status_code status;
+	uint8_t tx_buf[4] = {
+		MX25V_CMD_BE,
+		(uint8_t)(address >> 16),
+		(uint8_t)(address >> 8),
+		(uint8_t)(address)
+	};
+
+	if ((address) >= MX25V_FLASH_SIZE) {
+		return STATUS_ERR_INVALID_ARG;
+	}
+
+	if (_mx25v_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	_mx25v_send_cmd_write_latch(MX25V_CMD_WREN);
+	_mx25v_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 4);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25v_chip_deselect();
+
+	if (!_mx25v_wait_flash_ready(MX25V_WAIT_TIMEOUT)) {
+		return STATUS_ERR_IO;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Erase all chip of Serial Flash device.
+ *
+ * The CE instruction is for erasing the data of the whole chip to be "1".
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ * \retval STATUS_BUSY            if flash in busy
+ */
+enum status_code mx25v_erase_chip(void)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {MX25V_CMD_CE};
+
+	if (_mx25v_is_flash_busy()) {
+		return STATUS_BUSY;
+	}
+
+	_mx25v_send_cmd_write_latch(MX25V_CMD_WREN);
+	_mx25v_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25v_chip_deselect();
+
+	if (!_mx25v_wait_flash_ready(MX25V_WAIT_TIMEOUT)) {
+		return STATUS_ERR_IO;
+	}
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Enter deep power down mode.
+ *
+ * The DP instruction is for setting the device on the minimizing
+ * the power consumption.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25v_enter_deep_powerdown(void)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {MX25V_CMD_DP};
+
+	_mx25v_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25v_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Exit deep power down mode.
+ *
+ * The Release from RDP instruction is putting the device in the
+ * Stand-by Power mode.
+ *
+ * \return Status of operation.
+ * \retval STATUS_OK              if operation succeeded
+ * \retval STATUS_ERR_IO          if operation failed
+ */
+enum status_code mx25v_exit_deep_powerdown(void)
+{
+	enum status_code status;
+	uint8_t tx_buf[1] = {MX25V_CMD_RDP};
+
+	_mx25v_chip_select();
+
+	status = spi_write_buffer_wait(&_mx25v_spi, tx_buf, 1);
+	if (status != STATUS_OK) {
+		return STATUS_ERR_IO;
+	}
+
+	_mx25v_chip_deselect();
+
+	return STATUS_OK;
+}
+
+/**
+ * \brief Set WP pin to high level.
+ */
+void mx25v_set_wp_pin(void)
+{
+	port_pin_set_output_level(MX25V_PIN_WP, true);
+}
+
+/**
+ * \brief Clr WP pin to low level.
+ */
+void mx25v_clr_wp_pin(void)
+{
+	port_pin_set_output_level(MX25V_PIN_WP, false);
+}
+
+/**
+ * \brief Set HOLD pin to high level.
+ */
+void mx25v_set_hold_pin(void)
+{
+	port_pin_set_output_level(MX25V_PIN_HOLD, true);
+}
+
+/**
+ * \brief Clr HOLD pin to low level.
+ */
+void mx25v_clr_hold_pin(void)
+{
+	port_pin_set_output_level(MX25V_PIN_HOLD, false);
+}
diff --git a/common2/components/memory/serial_flash/mx25v/mx25v.h b/common2/components/memory/serial_flash/mx25v/mx25v.h
new file mode 100644
index 00000000..0b580de7
--- /dev/null
+++ b/common2/components/memory/serial_flash/mx25v/mx25v.h
@@ -0,0 +1,332 @@
+/**
+ * \file
+ *
+ * \brief API driver for Serial Flash MX25V (Known Good Die) in SAM device.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef MX25V_H_INCLUDED
+#define MX25V_H_INCLUDED
+
+/**
+ * \defgroup asfdoc_common2_mx25v_group MX25V Serial Flash Driver
+ *
+ * This driver provides an interface for basic usage of MX25V Serial Flash
+ * (Known Good Die) devices, i.e., initialization, data read/write,
+ * block protection, device ID read, enter or exit deep power mode etc.
+ *
+ * SPI polling mode is used in this driver.
+ *
+ * Devices from the following series can use this module:
+ * - Atmel | SMART SAMR21E19
+ *
+ * The following peripherals are used by this module:
+ * - SERCOM SPI (data transfer)
+ * - PORT (chip selection)
+ *
+ * For quick start guide related to this driver, see
+ * \ref asfdoc_common2_mx25v_exqsg.
+ *
+ * \section asfdoc_common2_mx25v_api_overview API Overview
+ *
+ * @{
+ */
+
+#include "compiler.h"
+#include "spi.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if SAM_PART_IS_DEFINED(SAMR21E19A) || defined(__DOXYGEN__)
+/**
+ * \name MX25V4006E Related Parameter Definition
+ * @{
+ */
+#  define MX25V_FLASH_SIZE   0x80000  /**< Flash size 512 KB */
+#  define MX25V_BLOCK_SIZE   0x10000  /**< 64K block size */
+#  define MX25V_SECTOR_SIZE  0x1000   /**< 4K sector size */
+#  define MX25V_PAGE_SIZE    0x0100   /**< 256 byte page size */
+
+#  define MX25V_BLOCK_NUM    (MX25V_FLASH_SIZE / MX25V_BLOCK_SIZE)
+#  define MX25V_SECTOR_NUM   (MX25V_FLASH_SIZE / MX25V_SECTOR_SIZE)
+#  define MX25V_PAGE_NUM     (MX25V_FLASH_SIZE / MX25V_PAGE_SIZE)
+/* @} */
+#else
+#  error This Serial Flash is not supported by the driver.
+#endif
+
+/**
+ * \name Bit Mask Definition for Status Register
+ * @{
+ */
+/** The Write in Progress (WIP) bit */
+#define MX25V_STATUS_WIP    (0x01 << 0)
+/** The Write Enable Latch (WEL) bit */
+#define MX25V_STATUS_WEL    (0x01 << 1)
+/** The Block Protect BP0 bit */
+#define MX25V_STATUS_BP0    (0x01 << 2)
+/** The Block Protect BP1 bit */
+#define MX25V_STATUS_BP1    (0x01 << 3)
+/** The Block Protect BP2 bit */
+#define MX25V_STATUS_BP2    (0x01 << 4)
+/** The Status Register Write Disable (SRWD) bit */
+#define MX25V_STATUS_SRWD   (0x01 << 7)
+/* @} */
+
+ /**
+ * \name Protect Level for Status register
+ * @{
+ */
+/** The protect level 0 */
+#define MX25V_STATUS_PROTECT_LEVEL_0    (0x00 << 2)
+/** The protect level 1 */
+#define MX25V_STATUS_PROTECT_LEVEL_1    (0x01 << 2)
+/** The protect level 2 */
+#define MX25V_STATUS_PROTECT_LEVEL_2    (0x02 << 2)
+/** The protect level 3 */
+#define MX25V_STATUS_PROTECT_LEVEL_3    (0x03 << 2)
+/** The protect level 4 */
+#define MX25V_STATUS_PROTECT_LEVEL_4    (0x04 << 2)
+/** The protect level 5 */
+#define MX25V_STATUS_PROTECT_LEVEL_5    (0x05 << 2)
+/** The protect level 6 */
+#define MX25V_STATUS_PROTECT_LEVEL_6    (0x06 << 2)
+/** The protect level 7 */
+#define MX25V_STATUS_PROTECT_LEVEL_7    (0x07 << 2)
+/** The protect level mask */
+#define MX25V_STATUS_PROTECT_LEVEL_MASK (0x07 << 2)
+/* @} */
+
+/** SPI interface configuration for Serial Flash. */
+struct mx25v_spi_config {
+	/** SPI transfer mode: Mode 0 and Mode 3 are supported */
+	enum spi_transfer_mode spi_transfer_mode;
+	/** SPI baudrate of serial clock */
+	uint32_t spi_baudrate;
+};
+
+/** Serial Flash identification. */
+struct mx25v_id {
+	/** Manufacturer ID */
+	uint8_t manufacturer_id;
+	/** Memory type */
+	uint8_t memory_type;
+	/** Density ID */
+	uint8_t memroy_density;
+	/** Electronic ID */
+	uint8_t electronic_id;
+	/** Device ID */
+	uint8_t device_id;
+};
+
+/**
+ * \name Initialization
+ * @{
+ */
+/**
+ * \brief Get default SPI interface configuration.
+ *
+ * This function initializes the SPI configuration struct with default settings
+ * that should work with Serial Flash devices.
+ *
+ * The default configuration is as follows:
+ *  \li Transfer mode 0
+ *  \li Baudrate 100000
+ *
+ * \param[out] config Address of config struct to initialize
+ */
+static inline void mx25v_spi_get_config_defaults(
+		struct mx25v_spi_config *const config)
+{
+	config->spi_transfer_mode = SPI_TRANSFER_MODE_0;
+	config->spi_baudrate = 100000;
+}
+
+enum status_code mx25v_init(struct mx25v_spi_config *const config);
+/* @} */
+
+/**
+ * \name Read Device ID
+ * @{
+ */
+enum status_code mx25v_read_id(struct mx25v_id *id);
+/* @} */
+
+/**
+ * \name Read/Write Status Register
+ * @{
+ */
+enum status_code mx25v_read_status(uint8_t *value);
+enum status_code mx25v_write_status(uint8_t value);
+/* @} */
+
+/**
+ * \name Read/Write Data
+ * @{
+ */
+enum status_code mx25v_read_buffer(uint32_t address,
+		void *data, uint32_t length);
+enum status_code mx25v_write_buffer(uint32_t address,
+		const void *data, uint32_t length);
+/* @} */
+
+/**
+ * \name Erase Sector/Block/Chip
+ * @{
+ */
+enum status_code mx25v_erase_sector(uint32_t address);
+enum status_code mx25v_erase_block(uint32_t address);
+enum status_code mx25v_erase_chip(void);
+/* @} */
+
+/**
+ * \name Enter/Exit Deep Power Down
+ * @{
+ */
+enum status_code mx25v_enter_deep_powerdown(void);
+enum status_code mx25v_exit_deep_powerdown(void);
+/* @} */
+
+/**
+ * \name WP Pin and HOLD Pin Control
+ * @{
+ */
+void mx25v_set_wp_pin(void);
+void mx25v_clr_wp_pin(void);
+void mx25v_set_hold_pin(void);
+void mx25v_clr_hold_pin(void);
+/* @} */
+
+#ifdef __cplusplus
+}
+#endif
+/** @} */
+
+/**
+ * \page asfdoc_common2_mx25v_exqsg Quick Start Guide for MX25V Driver
+ *
+ * This is the quick start guide for the \ref asfdoc_common2_mx25v_group, with
+ * step-by-step instructions on how to configure and use the driver for
+ * a specific use case. The code examples can be copied into the main
+ * application loop or any other function that will need to control the
+ * MX25V module.
+ *
+ * \section asfdoc_common2_mx25v_qsg_use_cases Use Cases
+ * - \ref asfdoc_common2_mx25v_qsg_basic
+ *
+ * \section asfdoc_common2_mx25v_qsg_basic Basic Usage of MX25V Driver
+ *
+ * This use case will demonstrate:
+ * * How to initialize the MX25V module with SPI interface
+ * * Read device ID
+ * * Basic erase, read, and write functions
+ *
+ * \section asfdoc_common2_mx25v_qsg_basic_setup Setup Steps
+ *
+ * \subsection asfdoc_common2_mx25v_qsg_basic_prereq Prerequisites
+ *
+ * There are no special setup requirements for this use-case.
+ *
+ * \subsection asfdoc_common2_mx25v_qsg_basic_setup_code Setup Code
+ *
+ * Add this to the main application source file, outside of any functions:
+ * \code
+	#define TEST_ADDR    0
+
+	struct mx25v_id mx25v_id;
+	uint8_t mx25v_rd_buf[MX25V_PAGE_SIZE];
+	uint8_t mx25v_wr_buf[MX25V_PAGE_SIZE];
+ * \endcode
+ *
+ * Add setup code to your main application C-file (typically the start of \c main()):
+ * \code
+	struct mx25v_spi_config spi_config;
+	enum status_code status;
+
+	system_init();
+
+	mx25v_spi_get_config_defaults(&spi_config);
+	status = mx25v_init(&spi_config);
+ * \endcode
+ *
+ * \subsection asfdoc_common2_mx25v_qsg_basic_capture_setup_workflow Workflow
+ *
+ * -# Exit from deep power down mode
+ *  \code status = mx25v_exit_deep_powerdown(); \endcode
+ * -# Read Device ID
+ *  \code
+	status = mx25v_read_id(&mx25v_id);
+ *  \endcode
+ * -# Read a number of data from a specific address
+ *  \code
+	status = mx25v_read_buffer(TEST_ADDR, mx25v_rd_buf, MX25V_PAGE_SIZE);
+ *  \endcode
+ * -# Erase sector
+ *  \code
+	status = mx25v_erase_sector(TEST_ADDR);
+ *  \endcode
+ *
+ *  More erase functions:
+ *  \code
+	status = mx25v_erase_block(TEST_ADDR);
+	status = mx25v_erase_chip();
+ *  \endcode
+ * -# Write a number of data to a specific address
+ *  \code
+	for (i = 0 ; i < MX25V_PAGE_SIZE; i++) {
+		mx25v_wr_buf[i] = i;
+	}
+
+	status = mx25v_write_buffer(TEST_ADDR, mx25v_wr_buf, MX25V_PAGE_SIZE);
+ *  \endcode
+ * -# Enter deep power down mode
+ *  \code status = mx25v_enter_deep_powerdown(); \endcode
+ * -# Enter infinite loop
+ *  \code
+	while (1) {
+	};
+ *  \endcode
+ */
+
+#endif /* MX25V_H_INCLUDED */
diff --git a/common2/services/delay/delay.h b/common2/services/delay/delay.h
new file mode 100644
index 00000000..9326e2b3
--- /dev/null
+++ b/common2/services/delay/delay.h
@@ -0,0 +1,101 @@
+/**
+ * \file
+ *
+ * \brief Common Delay Service
+ *
+ * Copyright (c) 2013-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef DELAY_H_INCLUDED
+#define DELAY_H_INCLUDED
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @defgroup group_common_services_delay Busy-Wait Delay Routines
+ *
+ * This module provides simple loop-based delay routines for those
+ * applications requiring a brief wait during execution. Common for
+ * API ver. 2.
+ *
+ * @{
+ */
+
+#ifdef SYSTICK_MODE
+#include "sam0/systick_counter.h"
+#endif
+#ifdef CYCLE_MODE
+#include "sam0/cycle_counter.h"
+#endif
+
+void delay_init(void);
+
+/**
+ * \def delay_s
+ * \brief Delay in at least specified number of seconds.
+ * \param delay Delay in seconds
+ */
+#define delay_s(delay)          ((delay) ? cpu_delay_s(delay) : cpu_delay_us(1))
+
+/**
+ * \def delay_ms
+ * \brief Delay in at least specified number of milliseconds.
+ * \param delay Delay in milliseconds
+ */
+#define delay_ms(delay)         ((delay) ? cpu_delay_ms(delay) : cpu_delay_us(1))
+
+/**
+ * \def delay_us
+ * \brief Delay in at least specified number of microseconds.
+ * \param delay Delay in microseconds
+ */
+#define delay_us(delay)         ((delay) ? cpu_delay_us(delay) : cpu_delay_us(1))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+ * @}
+ */
+
+#endif /* DELAY_H_INCLUDED */
diff --git a/common2/services/delay/doxygen/common2.services.delay_cycle/doxyfile.doxygen b/common2/services/delay/doxygen/common2.services.delay_cycle/doxyfile.doxygen
new file mode 100644
index 00000000..b5a096e2
--- /dev/null
+++ b/common2/services/delay/doxygen/common2.services.delay_cycle/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Delay routines"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../sam0/cycle_counter.c ../../delay.h ../../sam0/cycle_counter.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../.. ../../sam0
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 CYCLE_MODE
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/doxygen/common2.services.delay_cycle/doxygen_module_mainpage.h b/common2/services/delay/doxygen/common2.services.delay_cycle/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/delay/doxygen/common2.services.delay_cycle/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/delay/doxygen/common2.services.delay_systick/doxyfile.doxygen b/common2/services/delay/doxygen/common2.services.delay_systick/doxyfile.doxygen
new file mode 100644
index 00000000..030f03f2
--- /dev/null
+++ b/common2/services/delay/doxygen/common2.services.delay_systick/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "Delay routines"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../sam0/systick_counter.c ../../delay.h ../../sam0/systick_counter.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../.. ../../sam0
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/doxygen/common2.services.delay_systick/doxygen_module_mainpage.h b/common2/services/delay/doxygen/common2.services.delay_systick/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/delay/doxygen/common2.services.delay_systick/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/delay/example/delay_example.c b/common2/services/delay/example/delay_example.c
new file mode 100644
index 00000000..adbfa1c0
--- /dev/null
+++ b/common2/services/delay/example/delay_example.c
@@ -0,0 +1,81 @@
+/**
+ * \file
+ *
+ * \mainpage
+ *
+ * \section title Delay service example
+ *
+ * \section file File(s)
+ * - \ref delay_example.c
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <asf.h>
+
+int main(void)
+{
+	system_init();
+	delay_init();
+
+	struct port_config pin;
+	port_get_config_defaults(&pin);
+	pin.direction = PORT_PIN_DIR_OUTPUT;
+
+	port_pin_set_config(LED0_PIN, &pin);
+	port_pin_set_output_level(LED0_PIN, LED0_INACTIVE);
+
+	while (true) {
+		for (int i = 0; i < 5; i++) {
+			port_pin_toggle_output_level(LED0_PIN);
+			delay_s(1);
+		}
+
+		for (int i = 0; i < 50; i++) {
+			port_pin_toggle_output_level(LED0_PIN);
+			delay_ms(100);
+		}
+
+		for (int i = 0; i < 5000; i++) {
+			port_pin_toggle_output_level(LED0_PIN);
+			delay_cycles(100);
+		}
+	}
+}
diff --git a/common2/services/delay/example/samc21_xplained_pro/conf_board.h b/common2/services/delay/example/samc21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..a63495b1
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM C21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+ /**
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/samc21_xplained_pro/conf_clocks.h b/common2/services/delay/example/samc21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..832fa299
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/conf_clocks.h
@@ -0,0 +1,187 @@
+/**
+ * \file
+ *
+ * \brief SAM C21 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+ /**
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC48M configuration - Internal 48MHz oscillator */
+#  define CONF_CLOCK_OSC48M_FREQ_DIV              SYSTEM_OSC48M_DIV_12
+#  define CONF_CLOCK_OSC48M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC48M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_PRE    SYSTEM_CLOCK_XOSC_FAILURE_DETECTOR_PRESCALER_1
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_EVENT_OUTPUT_ENABLE  false
+#  define CONF_CLOCK_XOSC_FAILURE_DETECTOR_ENABLE  false
+#  define CONF_CLOCK_XOSC_FAILURE_SWITCH_BACK_ENABLE  false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_PRE    SYSTEM_CLOCK_XOSC32K_FAILURE_DETECTOR_PRESCALER_1
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_EVENT_OUTPUT_ENABLE  false
+#  define CONF_CLOCK_XOSC32K_FAILURE_DETECTOR_ENABLE  false
+#  define CONF_CLOCK_XOSC32K_FAILURE_SWITCH_BACK_ENABLE  false
+
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32767
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK 32K reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_32K_GENERATOR GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC48M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/samc21_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/samc21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..2574de75
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM C21 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_samc20_c21/clock.c ../../../../../../sam0/drivers/system/clock/clock_samc20_c21/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/samc21/source/system_samc21.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/samc21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_samc20_c21/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_samc20_c21/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samc20_c21/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21e15a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21e16a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21e17a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21e18a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21g15a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21g16a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21g17a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21g18a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21j15a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21j16a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21j17a.h ../../../../../../sam0/utils/cmsis/samc21/include/samc21j18a.h ../../../../../../sam0/utils/cmsis/samc21/include/component/ac.h ../../../../../../sam0/utils/cmsis/samc21/include/component/adc.h ../../../../../../sam0/utils/cmsis/samc21/include/component/can.h ../../../../../../sam0/utils/cmsis/samc21/include/component/ccl.h ../../../../../../sam0/utils/cmsis/samc21/include/component/dac.h ../../../../../../sam0/utils/cmsis/samc21/include/component/divas.h ../../../../../../sam0/utils/cmsis/samc21/include/component/dmac.h ../../../../../../sam0/utils/cmsis/samc21/include/component/dsu.h ../../../../../../sam0/utils/cmsis/samc21/include/component/eic.h ../../../../../../sam0/utils/cmsis/samc21/include/component/evsys.h ../../../../../../sam0/utils/cmsis/samc21/include/component/freqm.h ../../../../../../sam0/utils/cmsis/samc21/include/component/gclk.h ../../../../../../sam0/utils/cmsis/samc21/include/component/hmatrixb.h ../../../../../../sam0/utils/cmsis/samc21/include/component/mclk.h ../../../../../../sam0/utils/cmsis/samc21/include/component/mtb.h ../../../../../../sam0/utils/cmsis/samc21/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/samc21/include/component/osc32kctrl.h ../../../../../../sam0/utils/cmsis/samc21/include/component/oscctrl.h ../../../../../../sam0/utils/cmsis/samc21/include/component/pac.h ../../../../../../sam0/utils/cmsis/samc21/include/component/pm.h ../../../../../../sam0/utils/cmsis/samc21/include/component/port.h ../../../../../../sam0/utils/cmsis/samc21/include/component/rstc.h ../../../../../../sam0/utils/cmsis/samc21/include/component/rtc.h ../../../../../../sam0/utils/cmsis/samc21/include/component/sdadc.h ../../../../../../sam0/utils/cmsis/samc21/include/component/sercom.h ../../../../../../sam0/utils/cmsis/samc21/include/component/supc.h ../../../../../../sam0/utils/cmsis/samc21/include/component/tal.h ../../../../../../sam0/utils/cmsis/samc21/include/component/tc.h ../../../../../../sam0/utils/cmsis/samc21/include/component/tcc.h ../../../../../../sam0/utils/cmsis/samc21/include/component/tsens.h ../../../../../../sam0/utils/cmsis/samc21/include/component/wdt.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/ac.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/adc0.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/adc1.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/can0.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/can1.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/ccl.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/dac.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/divas.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/eic.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/freqm.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/hmatrixhs.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/mclk.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/osc32kctrl.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/oscctrl.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/pac.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/pm.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/port.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/rstc.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/sdadc.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/supc.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tal.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tc0.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tc1.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tc2.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tc3.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tc4.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tcc1.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tcc2.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/tsens.h ../../../../../../sam0/utils/cmsis/samc21/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21e15a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21e16a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21e17a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21e18a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21g15a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21g16a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21g17a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21g18a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21j15a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21j16a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21j17a.h ../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21j18a.h ../../../../../../sam0/utils/cmsis/samc21/source/system_samc21.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_c/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_c/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/samc21_xplained_pro/samc21_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_samc20_c21 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samc20_c21 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/samc21/include ../../../../../../sam0/utils/cmsis/samc21/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_c ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_c ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/samc21_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAMC21_XPLAINED_PRO __SAMC21J18A__ __SAMC21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/samc21_xplained_pro/gcc/Makefile b/common2/services/delay/example/samc21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/samc21_xplained_pro/gcc/asf.h b/common2/services/delay/example/samc21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2b84f710
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMC20/C21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMC21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM C20/C21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM C20/C21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samc21_xplained_pro/gcc/config.mk b/common2/services/delay/example/samc21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..4414e254
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samc21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samc21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_samc20_c21/clock.c \
+       sam0/drivers/system/clock/clock_samc20_c21/gclk.c  \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samc21/source/gcc/startup_samc21.c \
+       sam0/utils/cmsis/samc21/source/system_samc21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/samc21_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samc21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samc20_c21         \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samc20_c21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_c              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_c              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samc21/include                    \
+       sam0/utils/cmsis/samc21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/samc21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samc21/gcc/samc21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samc21/gcc/samc21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samc21_xplained_pro/debug_scripts/gcc/samc21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samc21_xplained_pro/debug_scripts/gcc/samc21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMC21_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAMC21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/samc21_xplained_pro/iar/asf.h b/common2/services/delay/example/samc21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..2b84f710
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMC20/C21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMC21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM C20/C21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM C20/C21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samc21_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samc21_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/samc21_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samc21_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..6064cb0a
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samc21_xplained_pro/debug_scripts/iar/samc21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMC21\ATSAMC21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMC21\samc21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samc21_xplained_pro/debug_scripts/iar/samc21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMC21\ATSAMC21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/samc21_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samc21_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..457a6d53
--- /dev/null
+++ b/common2/services/delay/example/samc21_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2486 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMC21J18A	Atmel ATSAMC21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAMC21_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMC21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samc20_c21</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_c</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samc20_c21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_c</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samc21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAMC21_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMC21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samc20_c21</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_c</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samc20_c21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_c</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samc21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samc21/iar/samc21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMC21J18A	Atmel ATSAMC21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAMC21_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMC21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samc20_c21</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_c</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samc20_c21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_c</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samc21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAMC21_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMC21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samc20_c21</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_c</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samc20_c21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_c</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samc21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samc21/iar/samc21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samc20_c21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samc20_c21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samc20_c21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samc20_c21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samc20_c21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samc20_c21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samc20_c21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_c</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_c/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_c</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_c/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samc21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samc21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samc21_xplained_pro/samc21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samc21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/source/system_samc21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/source/iar/startup_samc21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/source/system_samc21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/can.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/divas.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/sdadc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/tsens.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/component/adc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/can0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/hmatrixhs.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tsens.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/adc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/sdadc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/divas.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/can1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/adc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/instance/dmac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21j16a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/pio/samc21j17a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samc21/include/samc21g15a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>samc21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/samd11_xplained_pro/conf_board.h b/common2/services/delay/example/samd11_xplained_pro/conf_board.h
new file mode 100644
index 00000000..41c619a1
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/samd11_xplained_pro/conf_clocks.h b/common2/services/delay/example/samd11_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..7ab09702
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/conf_clocks.h
@@ -0,0 +1,177 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/samd11_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/samd11_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..c09169de
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM D11 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock.c ../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/samd11_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/samd11/include/samd11.h ../../../../../../sam0/utils/cmsis/samd11/include/samd11c14a.h ../../../../../../sam0/utils/cmsis/samd11/include/samd11d14am.h ../../../../../../sam0/utils/cmsis/samd11/include/samd11d14as.h ../../../../../../sam0/utils/cmsis/samd11/include/samd11d14au.h ../../../../../../sam0/utils/cmsis/samd11/include/component/ac.h ../../../../../../sam0/utils/cmsis/samd11/include/component/adc.h ../../../../../../sam0/utils/cmsis/samd11/include/component/dac.h ../../../../../../sam0/utils/cmsis/samd11/include/component/dmac.h ../../../../../../sam0/utils/cmsis/samd11/include/component/dsu.h ../../../../../../sam0/utils/cmsis/samd11/include/component/eic.h ../../../../../../sam0/utils/cmsis/samd11/include/component/evsys.h ../../../../../../sam0/utils/cmsis/samd11/include/component/gclk.h ../../../../../../sam0/utils/cmsis/samd11/include/component/hmatrixb.h ../../../../../../sam0/utils/cmsis/samd11/include/component/mtb.h ../../../../../../sam0/utils/cmsis/samd11/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/samd11/include/component/pac.h ../../../../../../sam0/utils/cmsis/samd11/include/component/pm.h ../../../../../../sam0/utils/cmsis/samd11/include/component/port.h ../../../../../../sam0/utils/cmsis/samd11/include/component/rtc.h ../../../../../../sam0/utils/cmsis/samd11/include/component/sercom.h ../../../../../../sam0/utils/cmsis/samd11/include/component/sysctrl.h ../../../../../../sam0/utils/cmsis/samd11/include/component/tc.h ../../../../../../sam0/utils/cmsis/samd11/include/component/tcc.h ../../../../../../sam0/utils/cmsis/samd11/include/component/usb.h ../../../../../../sam0/utils/cmsis/samd11/include/component/wdt.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/ac.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/adc.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/dac.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/eic.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/pac0.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/pac1.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/pac2.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/pm.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/port.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/sbmatrix.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/sysctrl.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/tc1.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/tc2.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/usb.h ../../../../../../sam0/utils/cmsis/samd11/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11c14a.h ../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14am.h ../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14as.h ../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14au.h ../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/samd11_xplained_pro/samd11_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/samd11/include ../../../../../../sam0/utils/cmsis/samd11/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/samd11_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAMD11_XPLAINED_PRO __SAMD11D14AM__ __SAMD11D14AM__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/samd11_xplained_pro/gcc/Makefile b/common2/services/delay/example/samd11_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/samd11_xplained_pro/gcc/asf.h b/common2/services/delay/example/samd11_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..19701c6a
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD11

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samd11_xplained_pro/gcc/config.mk b/common2/services/delay/example/samd11_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..1b3802ed
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd11d14am
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samd11_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_samd09_d10_d11/clock.c \
+       sam0/drivers/system/clock/clock_samd09_d10_d11/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd11/source/gcc/startup_samd11.c \
+       sam0/utils/cmsis/samd11/source/system_samd11.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/samd11_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd11_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd09_d10_d11     \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd10_d11 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd11/include                    \
+       sam0/utils/cmsis/samd11/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/samd11_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd11/gcc/samd11d14am_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd11/gcc/samd11d14am_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd11_xplained_pro/debug_scripts/gcc/samd11_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd11_xplained_pro/debug_scripts/gcc/samd11_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD11_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD11D14AM__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/samd11_xplained_pro/iar/asf.h b/common2/services/delay/example/samd11_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..19701c6a
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD11

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samd11_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samd11_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/samd11_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samd11_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..bd8fe1c3
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd11_xplained_pro/debug_scripts/iar/samd11_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD11\ATSAMD11D14AM.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD11\samd11d14am-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd11_xplained_pro/debug_scripts/iar/samd11_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD11\ATSAMD11D14AM.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/samd11_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samd11_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..a49f4ea6
--- /dev/null
+++ b/common2/services/delay/example/samd11_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2354 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD11D14AM	Atmel ATSAMD11D14AM</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+					<state>__SAMD11D14AM__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+					<state>__SAMD11D14AM__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd11/iar/samd11d14am_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD11D14AM	Atmel ATSAMD11D14AM</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+					<state>__SAMD11D14AM__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+					<state>__SAMD11D14AM__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd11/iar/samd11d14am_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd09_d10_d11</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd10_d11</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd11</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source/iar/startup_samd11.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/tcc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11d14am.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14as.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14am.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11c14a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11d14as.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11c14a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11d14au.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd11_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro/samd11_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>samd11_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/samd20_xplained_pro/conf_board.h b/common2/services/delay/example/samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..a1d6bfe3
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/samd20_xplained_pro/conf_clocks.h b/common2/services/delay/example/samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..47326488
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,172 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/samd20_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/samd20_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..91ff8bb2
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM D20 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c ../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/samd20_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h ../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h ../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h ../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h ../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h ../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h ../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h ../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h ../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h ../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h ../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h ../../../../../../sam0/utils/cmsis/samd20/include/component/port.h ../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h ../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h ../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h ../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h ../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h ../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h ../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h ../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_samd20 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/samd20/include ../../../../../../sam0/utils/cmsis/samd20/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/samd20_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAMD20_XPLAINED_PRO __SAMD20J18__ __SAMD20J18__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/samd20_xplained_pro/gcc/Makefile b/common2/services/delay/example/samd20_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/samd20_xplained_pro/gcc/asf.h b/common2/services/delay/example/samd20_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2a8de59e
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samd20_xplained_pro/gcc/config.mk b/common2/services/delay/example/samd20_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..62343594
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/samd20_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/samd20_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/samd20_xplained_pro/iar/asf.h b/common2/services/delay/example/samd20_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..2a8de59e
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samd20_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..720c5d74
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..d8154b9f
--- /dev/null
+++ b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2483 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMD20J18__</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMD20J18__</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMD20J18__</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMD20J18__</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd20</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd20_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>samd20_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/samd21_xplained_pro/conf_board.h b/common2/services/delay/example/samd21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..52087745
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/samd21_xplained_pro/conf_clocks.h b/common2/services/delay/example/samd21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..b08397e0
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/conf_clocks.h
@@ -0,0 +1,197 @@
+/**

+ * \file

+ *

+ * \brief SAM D21 Clock configuration

+ *

+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.

+ *

+ * \asf_license_start

+ *

+ * \page License

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright notice,

+ *    this list of conditions and the following disclaimer.

+ *

+ * 2. Redistributions in binary form must reproduce the above copyright notice,

+ *    this list of conditions and the following disclaimer in the documentation

+ *    and/or other materials provided with the distribution.

+ *

+ * 3. The name of Atmel may not be used to endorse or promote products derived

+ *    from this software without specific prior written permission.

+ *

+ * 4. This software may only be redistributed and used in connection with an

+ *    Atmel microcontroller product.

+ *

+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED

+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR

+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ * \asf_license_stop

+ *

+ */

+/*

+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>

+ */

+#include <clock.h>

+

+#ifndef CONF_CLOCKS_H_INCLUDED

+#  define CONF_CLOCKS_H_INCLUDED

+

+/* System clock bus configuration */

+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false

+#  define CONF_CLOCK_FLASH_WAIT_STATES            0

+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+

+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */

+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1

+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true

+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false

+

+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */

+#  define CONF_CLOCK_XOSC_ENABLE                  false

+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL

+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL

+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768

+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true

+#  define CONF_CLOCK_XOSC_ON_DEMAND               true

+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false

+

+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */

+#  define CONF_CLOCK_XOSC32K_ENABLE               false

+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL

+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536

+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false

+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false

+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true

+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true

+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false

+

+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */

+#  define CONF_CLOCK_OSC32K_ENABLE                false

+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130

+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true

+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true

+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true

+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false

+

+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */

+#  define CONF_CLOCK_DFLL_ENABLE                  false

+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN

+#  define CONF_CLOCK_DFLL_ON_DEMAND               false

+

+/* DFLL open loop mode configuration */

+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)

+

+/* DFLL closed loop mode configuration */

+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1

+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6

+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true

+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true

+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true

+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true

+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)

+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)

+

+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */

+#  define CONF_CLOCK_DPLL_ENABLE                  false

+#  define CONF_CLOCK_DPLL_ON_DEMAND               true

+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false

+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false

+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false

+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false

+

+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT

+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K

+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT

+

+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768

+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1

+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000

+

+/* DPLL GCLK reference configuration */

+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1

+/* DPLL GCLK lock timer configuration */

+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1

+

+/* Set this to true to configure the GCLK when running clocks_init. If set to

+ * false, none of the GCLK generators will be configured in clocks_init(). */

+#  define CONF_CLOCK_CONFIGURE_GCLK               true

+

+/* Configure GCLK generator 0 (Main Clock) */

+#  define CONF_CLOCK_GCLK_0_ENABLE                true

+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_0_PRESCALER             1

+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 1 */

+#  define CONF_CLOCK_GCLK_1_ENABLE                false

+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_1_PRESCALER             1

+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 2 (RTC) */

+#  define CONF_CLOCK_GCLK_2_ENABLE                false

+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K

+#  define CONF_CLOCK_GCLK_2_PRESCALER             32

+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 3 */

+#  define CONF_CLOCK_GCLK_3_ENABLE                false

+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_3_PRESCALER             1

+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 4 */

+#  define CONF_CLOCK_GCLK_4_ENABLE                false

+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_4_PRESCALER             1

+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 5 */

+#  define CONF_CLOCK_GCLK_5_ENABLE                false

+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_5_PRESCALER             1

+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 6 */

+#  define CONF_CLOCK_GCLK_6_ENABLE                false

+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_6_PRESCALER             1

+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 7 */

+#  define CONF_CLOCK_GCLK_7_ENABLE                false

+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_7_PRESCALER             1

+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 8 */

+#  define CONF_CLOCK_GCLK_8_ENABLE                false

+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_8_PRESCALER             1

+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false

+

+#endif /* CONF_CLOCKS_H_INCLUDED */

diff --git a/common2/services/delay/example/samd21_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/samd21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..10d3382a
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM D21 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/samd21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h ../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h ../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h ../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h ../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h ../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h ../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h ../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h ../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h ../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h ../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h ../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h ../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h ../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h ../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h ../../../../../../sam0/utils/cmsis/samd21/include/component/port.h ../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h ../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h ../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h ../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h ../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h ../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h ../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h ../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h ../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h ../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h ../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/samd21/include ../../../../../../sam0/utils/cmsis/samd21/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/samd21_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAMD21_XPLAINED_PRO __SAMD21J18A__ __SAMD21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/samd21_xplained_pro/gcc/Makefile b/common2/services/delay/example/samd21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/samd21_xplained_pro/gcc/asf.h b/common2/services/delay/example/samd21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2b8a03c7
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samd21_xplained_pro/gcc/config.mk b/common2/services/delay/example/samd21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..a1903db9
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/samd21_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/samd21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/samd21_xplained_pro/iar/asf.h b/common2/services/delay/example/samd21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..2b8a03c7
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samd21_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samd21_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/samd21_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samd21_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..805e4868
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/samd21_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samd21_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..e8f88b9f
--- /dev/null
+++ b/common2/services/delay/example/samd21_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2522 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>__SAMD21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>__SAMD21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>__SAMD21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>__SAMD21J18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>samd21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/samda1_xplained_pro/conf_board.h b/common2/services/delay/example/samda1_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5369139f
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM DA1 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/samda1_xplained_pro/conf_clocks.h b/common2/services/delay/example/samda1_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..10d40455
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/conf_clocks.h
@@ -0,0 +1,197 @@
+/**
+ * \file
+ *
+ * \brief SAM DA1 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/samda1_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/samda1_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..240a6a11
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM DA1 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/samda1/source/system_samda1.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/samda1_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samda/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1e14a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1e14b.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1e15a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1e15b.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1e16a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1e16b.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1g14a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1g14b.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1g15a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1g15b.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1g16a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1g16b.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1j14a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1j14b.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1j15a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1j15b.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1j16a.h ../../../../../../sam0/utils/cmsis/samda1/include/samda1j16b.h ../../../../../../sam0/utils/cmsis/samda1/include/component/ac.h ../../../../../../sam0/utils/cmsis/samda1/include/component/adc.h ../../../../../../sam0/utils/cmsis/samda1/include/component/dac.h ../../../../../../sam0/utils/cmsis/samda1/include/component/dmac.h ../../../../../../sam0/utils/cmsis/samda1/include/component/dsu.h ../../../../../../sam0/utils/cmsis/samda1/include/component/eic.h ../../../../../../sam0/utils/cmsis/samda1/include/component/evsys.h ../../../../../../sam0/utils/cmsis/samda1/include/component/gclk.h ../../../../../../sam0/utils/cmsis/samda1/include/component/hmatrixb.h ../../../../../../sam0/utils/cmsis/samda1/include/component/i2s.h ../../../../../../sam0/utils/cmsis/samda1/include/component/mtb.h ../../../../../../sam0/utils/cmsis/samda1/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/samda1/include/component/pac.h ../../../../../../sam0/utils/cmsis/samda1/include/component/pm.h ../../../../../../sam0/utils/cmsis/samda1/include/component/port.h ../../../../../../sam0/utils/cmsis/samda1/include/component/rtc.h ../../../../../../sam0/utils/cmsis/samda1/include/component/sercom.h ../../../../../../sam0/utils/cmsis/samda1/include/component/sysctrl.h ../../../../../../sam0/utils/cmsis/samda1/include/component/tc.h ../../../../../../sam0/utils/cmsis/samda1/include/component/tcc.h ../../../../../../sam0/utils/cmsis/samda1/include/component/usb.h ../../../../../../sam0/utils/cmsis/samda1/include/component/wdt.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/ac.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/adc.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/dac.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/eic.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/i2s.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/pac0.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/pac1.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/pac2.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/pm.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/port.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/sbmatrix.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/sysctrl.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/tc3.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/tc4.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/tc5.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/tc6.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/tc7.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/tcc1.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/tcc2.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/usb.h ../../../../../../sam0/utils/cmsis/samda1/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e14a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e14b.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e15a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e15b.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e16a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e16b.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g14a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g14b.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g15a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g15b.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g16a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g16b.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j14a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j14b.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j15a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j15b.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j16a.h ../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j16b.h ../../../../../../sam0/utils/cmsis/samda1/source/system_samda1.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/samda1_xplained_pro/samda1_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samda ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/samda1/include ../../../../../../sam0/utils/cmsis/samda1/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/samda1_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAMDA1_XPLAINED_PRO __SAMDA1J16A__ __SAMDA1J16A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/samda1_xplained_pro/gcc/Makefile b/common2/services/delay/example/samda1_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/samda1_xplained_pro/gcc/asf.h b/common2/services/delay/example/samda1_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2b8a03c7
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samda1_xplained_pro/gcc/config.mk b/common2/services/delay/example/samda1_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..6f432764
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samda1j16a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samda1_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samda1/source/gcc/startup_samda1.c \
+       sam0/utils/cmsis/samda1/source/system_samda1.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/samda1_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samda1_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samda \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samda1/include                    \
+       sam0/utils/cmsis/samda1/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/samda1_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samda1/gcc/samda1j16a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samda1/gcc/samda1j16a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samda1_xplained_pro/debug_scripts/gcc/samda1_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samda1_xplained_pro/debug_scripts/gcc/samda1_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMDA1_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAMDA1J16A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/samda1_xplained_pro/iar/asf.h b/common2/services/delay/example/samda1_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..2b8a03c7
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samda1_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samda1_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/samda1_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samda1_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..0bc3f2d6
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samda1_xplained_pro/debug_scripts/iar/samda1_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMDA1\ATSAMDA1J16A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMDA1\samda1j16a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samda1_xplained_pro/debug_scripts/iar/samda1_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMDA1\ATSAMDA1J16A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/samda1_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samda1_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..052603b2
--- /dev/null
+++ b/common2/services/delay/example/samda1_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2468 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMDA1J16A	Atmel ATSAMDA1J16A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMDA1J16A__</state>
+					<state>BOARD=SAMDA1_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samda1_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samda</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/source</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMDA1J16A__</state>
+					<state>BOARD=SAMDA1_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samda1_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samda</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/source</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samda1/iar/samda1j16a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMDA1J16A	Atmel ATSAMDA1J16A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMDA1J16A__</state>
+					<state>BOARD=SAMDA1_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samda1_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samda</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/source</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMDA1J16A__</state>
+					<state>BOARD=SAMDA1_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samda1_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samda</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/source</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samda1/iar/samda1j16a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>samda1_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samda</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samda/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samda1</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/source/iar/startup_samda1.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/source/system_samda1.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/source/system_samda1.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/instance/sysctrl.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g14a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1j14a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/pio/samda1e14a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1g15b.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/component/i2s.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1j14a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1g14a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samda1/include/samda1e14a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samda1_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samda1_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samda1_xplained_pro/samda1_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/conf_board.h b/common2/services/delay/example/samha1g16a_xplained_pro/conf_board.h
new file mode 100644
index 00000000..edff7e22
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM HA1G16A Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/conf_clocks.h b/common2/services/delay/example/samha1g16a_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..32d1ee38
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/conf_clocks.h
@@ -0,0 +1,196 @@
+/**
+ * \file
+ *
+ * \brief SAM HA1G16A Clock configuration
+ *
+ * Copyright (C) 2015-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              512
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         1465 /* (48000000 / 32768) */
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/samha1g16a_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..63ba955e
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM HA1G16A Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/samha1/source/system_samha1.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/samha1g16a_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samha/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1e14a.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1e14ab.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1e15a.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1e15ab.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1e16a.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1e16ab.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1g14a.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1g14ab.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1g15a.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1g15ab.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1g16a.h ../../../../../../sam0/utils/cmsis/samha1/include/samha1g16ab.h ../../../../../../sam0/utils/cmsis/samha1/include/component/ac.h ../../../../../../sam0/utils/cmsis/samha1/include/component/adc.h ../../../../../../sam0/utils/cmsis/samha1/include/component/dac.h ../../../../../../sam0/utils/cmsis/samha1/include/component/dmac.h ../../../../../../sam0/utils/cmsis/samha1/include/component/dsu.h ../../../../../../sam0/utils/cmsis/samha1/include/component/eic.h ../../../../../../sam0/utils/cmsis/samha1/include/component/evsys.h ../../../../../../sam0/utils/cmsis/samha1/include/component/gclk.h ../../../../../../sam0/utils/cmsis/samha1/include/component/hmatrixb.h ../../../../../../sam0/utils/cmsis/samha1/include/component/linctrl.h ../../../../../../sam0/utils/cmsis/samha1/include/component/mtb.h ../../../../../../sam0/utils/cmsis/samha1/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/samha1/include/component/pac.h ../../../../../../sam0/utils/cmsis/samha1/include/component/pm.h ../../../../../../sam0/utils/cmsis/samha1/include/component/port.h ../../../../../../sam0/utils/cmsis/samha1/include/component/rtc.h ../../../../../../sam0/utils/cmsis/samha1/include/component/sercom.h ../../../../../../sam0/utils/cmsis/samha1/include/component/sysctrl.h ../../../../../../sam0/utils/cmsis/samha1/include/component/tc.h ../../../../../../sam0/utils/cmsis/samha1/include/component/tcc.h ../../../../../../sam0/utils/cmsis/samha1/include/component/wdt.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/ac.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/adc.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/dac.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/eic.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/linctrl.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/pac0.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/pac1.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/pac2.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/pm.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/port.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/sbmatrix.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/sysctrl.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/tc3.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/tc4.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/tc5.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/tc6.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/tc7.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/tcc1.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/tcc2.h ../../../../../../sam0/utils/cmsis/samha1/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e14a.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e14ab.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e15a.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e15ab.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e16a.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e16ab.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g14a.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g14ab.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g15a.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g15ab.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g16a.h ../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g16ab.h ../../../../../../sam0/utils/cmsis/samha1/source/system_samha1.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/samha1g16a_xplained_pro/samha1g16a_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samha ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/samha1/include ../../../../../../sam0/utils/cmsis/samha1/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/samha1g16a_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAMHA1G16A_XPLAINED_PRO __SAMHA1G16A__ __SAMHA1G16A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/gcc/Makefile b/common2/services/delay/example/samha1g16a_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/gcc/asf.h b/common2/services/delay/example/samha1g16a_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2b8a03c7
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/gcc/config.mk b/common2/services/delay/example/samha1g16a_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..b10625d6
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samha1g16a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samha1g16a_xplained_pro/board_init.c   \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samha1/source/gcc/startup_samha1.c \
+       sam0/utils/cmsis/samha1/source/system_samha1.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/samha1g16a_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samha1g16a_xplained_pro                \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samha \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samha1/include                    \
+       sam0/utils/cmsis/samha1/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/samha1g16a_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samha1/gcc/samha1g16a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samha1/gcc/samha1g16a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samha1g16a_xplained_pro/debug_scripts/gcc/samha1g16a_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samha1g16a_xplained_pro/debug_scripts/gcc/samha1g16a_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMHA1G16A_XPLAINED_PRO                   \
+       -D SYSTICK_MODE                                    \
+       -D __SAMHA1G16A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/iar/asf.h b/common2/services/delay/example/samha1g16a_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..2b8a03c7
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..62e8099b
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samha1g16a_xplained_pro/debug_scripts/iar/samha1g16a_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\ATSAMHA1G16A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\samha1g16a\samha1g16a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samha1g16a_xplained_pro/debug_scripts/iar/samha1g16a_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\ATSAMHA1G16A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..ea129118
--- /dev/null
+++ b/common2/services/delay/example/samha1g16a_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2426 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMHA1G16A	Atmel ATSAMHA1G16A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMHA1G16A__</state>
+					<state>BOARD=SAMHA1G16A_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samha</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samha1g16a_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMHA1G16A__</state>
+					<state>BOARD=SAMHA1G16A_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samha</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samha1g16a_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samha1/iar/samha1g16a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMHA1G16A	Atmel ATSAMHA1G16A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMHA1G16A__</state>
+					<state>BOARD=SAMHA1G16A_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samha</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samha1g16a_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAMHA1G16A__</state>
+					<state>BOARD=SAMHA1G16A_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samha</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samha1g16a_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samha1/iar/samha1g16a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samha1</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/source/system_samha1.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/source/iar/startup_samha1.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/source/system_samha1.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/linctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/component/sercom.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/linctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/instance/pm.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e14ab.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e14a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e15ab.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g14ab.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g16ab.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g15ab.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1g14a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/pio/samha1e16ab.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1e14a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1g14ab.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1e16ab.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1e14ab.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1g15ab.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1g16ab.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1e15ab.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1g14a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samha1/include/samha1e15a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samha</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samha/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samha1g16a_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samha1g16a_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samha1g16a_xplained_pro/samha1g16a_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>samha1g16a_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/saml21_xplained_pro/conf_board.h b/common2/services/delay/example/saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/saml21_xplained_pro/conf_clocks.h b/common2/services/delay/example/saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..df421904
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/saml21_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/saml21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..06df059a
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM L21 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/saml21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/saml21/include/saml21.h ../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h ../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h ../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h ../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h ../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h ../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h ../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h ../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h ../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h ../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h ../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h ../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h ../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h ../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h ../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h ../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/port.h ../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h ../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h ../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h ../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h ../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h ../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h ../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h ../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h ../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h ../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/saml21/include ../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/saml21_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAML21_XPLAINED_PRO __SAML21J18A__ __SAML21J18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/saml21_xplained_pro/gcc/Makefile b/common2/services/delay/example/saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/saml21_xplained_pro/gcc/asf.h b/common2/services/delay/example/saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2bb962db
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/saml21_xplained_pro/gcc/config.mk b/common2/services/delay/example/saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..60716bae
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/saml21_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include                    \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAML21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/saml21_xplained_pro/iar/asf.h b/common2/services/delay/example/saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..2bb962db
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/saml21_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/saml21_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/saml21_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/saml21_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..8c294687
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/saml21_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/saml21_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..1a7efd15
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2414 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAML21J18A__</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAML21J18A__</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAML21J18A__</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>__SAML21J18A__</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>saml21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/conf_board.h b/common2/services/delay/example/saml21_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/conf_clocks.h b/common2/services/delay/example/saml21_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..2f1fda00
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,201 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/doxygen/doxyfile.doxygen b/common2/services/delay/example/saml21_xplained_pro_b/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..ba3258b2
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM L21 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c ../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h ../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h ../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h ../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h ../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_saml21 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/saml21/include_b ../../../../../../sam0/utils/cmsis/saml21/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/saml21_xplained_pro_b ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAML21_XPLAINED_PRO __SAML21J18B__ __SAML21J18B__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/gcc/Makefile b/common2/services/delay/example/saml21_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/gcc/asf.h b/common2/services/delay/example/saml21_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..2bb962db
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/gcc/config.mk b/common2/services/delay/example/saml21_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..4b7d9e62
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18b
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml21_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/saml21_xplained_pro_b \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include_b                  \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/saml21_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAML21J18B__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/iar/asf.h b/common2/services/delay/example/saml21_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..2bb962db
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example.eww b/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example_flash.ewd b/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..0b552d05
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18b-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example_flash.ewp b/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..2e5d4340
--- /dev/null
+++ b/common2/services/delay/example/saml21_xplained_pro_b/iar/delay_example_flash.ewp
@@ -0,0 +1,2456 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>__SAML21J18B__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>__SAML21J18B__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>__SAML21J18B__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+					<state>__SAML21J18B__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>saml21_xplained_pro_b</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include_b</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/saml22_xplained_pro/conf_board.h b/common2/services/delay/example/saml22_xplained_pro/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/saml22_xplained_pro/conf_clocks.h b/common2/services/delay/example/saml22_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..1b9e4e66
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/conf_clocks.h
@@ -0,0 +1,170 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/saml22_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/saml22_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..f26a624a
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM L22 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/saml22_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/saml22_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAML22_XPLAINED_PRO __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/saml22_xplained_pro/gcc/Makefile b/common2/services/delay/example/saml22_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/saml22_xplained_pro/gcc/asf.h b/common2/services/delay/example/saml22_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..09148e7e
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/saml22_xplained_pro/gcc/config.mk b/common2/services/delay/example/saml22_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..7e2fdd23
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml22_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/saml22_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/saml22_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/saml22_xplained_pro/iar/asf.h b/common2/services/delay/example/saml22_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..09148e7e
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/saml22_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/saml22_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/saml22_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/saml22_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..222fe2ce
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/saml22_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/saml22_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..93e454f1
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2441 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>saml22_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+					</group>
+				</group>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/conf_board.h b/common2/services/delay/example/saml22_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/conf_clocks.h b/common2/services/delay/example/saml22_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..1b9e4e66
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,170 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/doxygen/doxyfile.doxygen b/common2/services/delay/example/saml22_xplained_pro_b/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..7a1f8a87
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM L22 Xplained Pro B Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c ../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h ../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h ../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h ../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h ../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h ../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h ../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h ../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h ../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h ../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h ../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h ../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h ../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h ../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h ../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h ../../../../../../sam0/utils/cmsis/saml22/include/component/port.h ../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h ../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h ../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h ../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h ../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h ../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h ../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h ../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h ../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h ../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_saml22 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/saml22/include ../../../../../../sam0/utils/cmsis/saml22/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/saml22_xplained_pro_b ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAML22_XPLAINED_PRO_B __SAML22N18A__ __SAML22N18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/gcc/Makefile b/common2/services/delay/example/saml22_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/gcc/asf.h b/common2/services/delay/example/saml22_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..09148e7e
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/gcc/config.mk b/common2/services/delay/example/saml22_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..4306d41c
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/saml22_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/saml22_xplained_pro_b \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/saml22_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO_B                     \
+       -D SYSTICK_MODE                                    \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/iar/asf.h b/common2/services/delay/example/saml22_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..09148e7e
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example.eww b/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example_flash.ewd b/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..5f2ec590
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example_flash.ewp b/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..c7b2cef4
--- /dev/null
+++ b/common2/services/delay/example/saml22_xplained_pro_b/iar/delay_example_flash.ewp
@@ -0,0 +1,2441 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>saml22_xplained_pro_b</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/samr21_xplained_pro/conf_board.h b/common2/services/delay/example/samr21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..814b959e
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/samr21_xplained_pro/conf_clocks.h b/common2/services/delay/example/samr21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..8b9c7b5b
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/samr21_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/samr21_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..b57a4fd6
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM R21 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/samr21_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/samr21/include/samr21.h ../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h ../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h ../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h ../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h ../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h ../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h ../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h ../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h ../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h ../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h ../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h ../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h ../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h ../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h ../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h ../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h ../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h ../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h ../../../../../../sam0/utils/cmsis/samr21/include/component/port.h ../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h ../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h ../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h ../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h ../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h ../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h ../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h ../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h ../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h ../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h ../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h ../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h ../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h ../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h ../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h ../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/samr21/include ../../../../../../sam0/utils/cmsis/samr21/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_d_r_h ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/samr21_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAMR21_XPLAINED_PRO __SAMR21G18A__ __SAMR21G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/samr21_xplained_pro/gcc/Makefile b/common2/services/delay/example/samr21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/samr21_xplained_pro/gcc/asf.h b/common2/services/delay/example/samr21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2b8a03c7
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samr21_xplained_pro/gcc/config.mk b/common2/services/delay/example/samr21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..37ee1813
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr21g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samr21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr21/source/gcc/startup_samr21.c \
+       sam0/utils/cmsis/samr21/source/system_samr21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/samr21_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr21/include                    \
+       sam0/utils/cmsis/samr21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/samr21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR21_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAMR21G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/samr21_xplained_pro/iar/asf.h b/common2/services/delay/example/samr21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..2b8a03c7
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samr21_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samr21_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/samr21_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samr21_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..8b8a4976
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR21\samr21g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/samr21_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samr21_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..90c810d7
--- /dev/null
+++ b/common2/services/delay/example/samr21_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2390 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/iar/startup_samr21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>samr21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/example/samr30_xplained_pro/conf_board.h b/common2/services/delay/example/samr30_xplained_pro/conf_board.h
new file mode 100644
index 00000000..29176c86
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/delay/example/samr30_xplained_pro/conf_clocks.h b/common2/services/delay/example/samr30_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..2fa7493a
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/delay/example/samr30_xplained_pro/doxygen/doxyfile.doxygen b/common2/services/delay/example/samr30_xplained_pro/doxygen/doxyfile.doxygen
new file mode 100644
index 00000000..dc424704
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/doxygen/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "SAM R30 Xplained Pro Delay Service Example"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ../../delay_example.c ../../../sam0/systick_counter.c ../../../../../../sam0/drivers/system/system.c ../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c ../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c ../../../../../../sam0/drivers/system/interrupt/system_interrupt.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c ../../../../../../sam0/drivers/system/pinmux/pinmux.c ../../../../../../sam0/drivers/port/port.c ../../../../../../sam0/boards/samr30_xplained_pro/board_init.c ../conf_board.h ../conf_clocks.h ../../../delay.h ../../../sam0/systick_counter.h ../../../../../../sam0/drivers/system/system.h ../../../../../../sam0/drivers/system/clock/clock.h ../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h ../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h ../../../../../../sam0/drivers/system/clock/gclk.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt.h ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h ../../../../../../sam0/utils/compiler.h ../../../../../../sam0/utils/header_files/io.h ../../../../../../sam0/utils/status_codes.h ../../../../../../sam0/utils/preprocessor/mrecursion.h ../../../../../../sam0/utils/preprocessor/mrepeat.h ../../../../../../sam0/utils/preprocessor/preprocessor.h ../../../../../../sam0/utils/preprocessor/stringz.h ../../../../../../sam0/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam0/utils/cmsis/samr30/include/samr30.h ../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h ../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h ../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h ../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h ../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h ../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h ../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h ../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h ../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h ../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h ../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h ../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h ../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h ../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h ../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h ../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h ../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h ../../../../../../sam0/utils/cmsis/samr30/include/component/port.h ../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h ../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h ../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h ../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h ../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h ../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h ../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h ../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h ../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h ../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h ../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h ../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h ../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h ../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h ../../../../../../sam0/drivers/system/pinmux/pinmux.h ../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h ../../../../../../sam0/drivers/system/power/power_sam_l/power.h ../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h ../../../../../../sam0/drivers/port/port.h ../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h ../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h ../../../../../../common/boards/board.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ ../../../../../../sam0/drivers/system/pinmux/quick_start ../../../../../../sam0/drivers/port/quick_start
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = .. ../../.. ../../../sam0 ../../../../../../sam0/drivers/system ../../../../../../sam0/drivers/system/clock ../../../../../../sam0/drivers/system/clock/clock_samr30 ../../../../../../sam0/drivers/system/interrupt ../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30 ../../../../../../sam0/utils ../../../../../../sam0/utils/header_files ../../../../../../sam0/utils/preprocessor ../../../../../../common/utils ../../../../../../sam0/utils/cmsis/samr30/include ../../../../../../sam0/utils/cmsis/samr30/source ../../../../../../sam0/drivers/system/pinmux ../../../../../../sam0/drivers/system/power ../../../../../../sam0/drivers/system/power/power_sam_l ../../../../../../sam0/drivers/system/reset ../../../../../../sam0/drivers/system/reset/reset_sam_l ../../../../../../sam0/drivers/port ../../../../../../sam0/boards ../../../../../../sam0/boards/samr30_xplained_pro ../../../../../../common/boards
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 SYSTICK_MODE ARM_MATH_CM0PLUS=true BOARD=SAMR30_XPLAINED_PRO __SAMR30G18A__ __SAMR30G18A__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/delay/example/samr30_xplained_pro/gcc/Makefile b/common2/services/delay/example/samr30_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/delay/example/samr30_xplained_pro/gcc/asf.h b/common2/services/delay/example/samr30_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..f679a9b4
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/gcc/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samr30_xplained_pro/gcc/config.mk b/common2/services/delay/example/samr30_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..9e0a5a44
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/gcc/config.mk
@@ -0,0 +1,157 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr30g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = delay_example_flash.elf
+TARGET_SRAM = delay_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/services/delay/example/delay_example.c     \
+       common2/services/delay/sam0/systick_counter.c      \
+       sam0/boards/samr30_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/system/clock/clock_samr30/clock.c     \
+       sam0/drivers/system/clock/clock_samr30/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr30/source/gcc/startup_samr30.c \
+       sam0/utils/cmsis/samr30/source/system_samr30.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/services/delay                             \
+       common2/services/delay/example/samr30_xplained_pro \
+       common2/services/delay/sam0                        \
+       sam0/boards                                        \
+       sam0/boards/samr30_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samr30             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr30 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr30/include                    \
+       sam0/utils/cmsis/samr30/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/delay/example/samr30_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR30_XPLAINED_PRO                       \
+       -D SYSTICK_MODE                                    \
+       -D __SAMR30G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/delay/example/samr30_xplained_pro/iar/asf.h b/common2/services/delay/example/samr30_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..f679a9b4
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/iar/asf.h
@@ -0,0 +1,93 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/delay/example/samr30_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samr30_xplained_pro/iar/delay_example.eww
new file mode 100644
index 00000000..2de78514
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/iar/delay_example.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\delay_example_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/delay/example/samr30_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samr30_xplained_pro/iar/delay_example_flash.ewd
new file mode 100644
index 00000000..5527dd8f
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/iar/delay_example_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR30\samr30g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/delay/example/samr30_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samr30_xplained_pro/iar/delay_example_flash.ewp
new file mode 100644
index 00000000..6c4539fd
--- /dev/null
+++ b/common2/services/delay/example/samr30_xplained_pro/iar/delay_example_flash.ewp
@@ -0,0 +1,2384 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>delay_example_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>delay_example_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr30</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/iar/startup_samr30.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr30_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>services</name>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>example</name>
+					<file>
+						<name>$PROJ_DIR$/../../delay_example.c</name>
+					</file>
+					<group>
+						<name>samr30_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/delay/sam0/cycle_counter.c b/common2/services/delay/sam0/cycle_counter.c
new file mode 100644
index 00000000..c14090fe
--- /dev/null
+++ b/common2/services/delay/sam0/cycle_counter.c
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief ARM functions for busy-wait delay loops
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "delay.h"
+
+/**
+ * \brief Initialize the delay driver.
+ *
+ * Not used in cycle mode.
+ */
+void delay_init(void)
+{
+}
+
+// Delay loop is put to SRAM so that FWS will not affect delay time
+OPTIMIZE_HIGH
+RAMFUNC
+void portable_delay_cycles(unsigned long n)
+{
+	UNUSED(n);
+
+	__asm (
+		"loop: DMB	\n"
+#ifdef __ICCARM__
+		"SUBS r0, r0, #1 \n"
+#else
+		"SUB r0, r0, #1 \n"
+#endif
+		"CMP r0, #0  \n"
+		"BNE loop         "
+	);
+}
diff --git a/common2/services/delay/sam0/cycle_counter.h b/common2/services/delay/sam0/cycle_counter.h
new file mode 100644
index 00000000..3a52bc57
--- /dev/null
+++ b/common2/services/delay/sam0/cycle_counter.h
@@ -0,0 +1,123 @@
+/**
+ * \file
+ *
+ * \brief ARM functions for busy-wait delay loops
+ *
+ * Copyright (c) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CYCLE_COUNTER_H_INCLUDED
+#define CYCLE_COUNTER_H_INCLUDED
+
+#include <compiler.h>
+#include <clock.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @def F_CPU
+ * @brief MCU Clock Frequency (Hertz)
+ */
+#ifndef F_CPU
+#       define F_CPU system_gclk_gen_get_hz(0)
+#endif
+
+/**
+ * @name Convenience functions for busy-wait delay loops
+ *
+ * @def delay_cycles
+ * @brief Delay program execution for a specified number of CPU cycles.
+ * @param n number of CPU cycles to wait
+ *
+ * @def cpu_delay_ms
+ * @brief Delay program execution for a specified number of milliseconds.
+ * @param delay number of milliseconds to wait
+ * @param f_cpu CPU frequency in Hertz
+ *
+ * @def cpu_delay_us
+ * @brief Delay program execution for a specified number of microseconds.
+ * @param delay number of microseconds to wait
+ * @param f_cpu CPU frequency in Hertz
+ *
+ * @def cpu_ms_2_cy
+ * @brief Convert milli-seconds into CPU cycles.
+ * @param ms number of milliseconds
+ * @param f_cpu CPU frequency in Hertz
+ * @return the converted number of CPU cycles
+ *
+ * @def cpu_us_2_cy
+ * @brief Convert micro-seconds into CPU cycles.
+ * @param ms number of microseconds
+ * @param f_cpu CPU frequency in Hertz
+ * @return the converted number of CPU cycles
+ *
+ * @{
+ */
+
+/**
+ * \brief Delay loop to delay n number of cycles
+ *
+ * \note The function runs in internal RAM so that flash wait states
+ *       will not affect the delay time.
+ *
+ * \param n Number of cycles
+ */
+void portable_delay_cycles(unsigned long n);
+
+#define cpu_ms_2_cy(ms, f_cpu)  \
+	(((uint64_t)(ms) * (f_cpu) + (uint64_t)(7e3-1ul)) / (uint64_t)7e3)
+#define cpu_us_2_cy(us, f_cpu)  \
+	(((uint64_t)(us) * (f_cpu) + (uint64_t)(7e6-1ul)) / (uint64_t)7e6)
+
+#define delay_cycles               portable_delay_cycles
+
+#define cpu_delay_s(delay) delay_cycles(cpu_ms_2_cy(1000 * delay, F_CPU))
+#define cpu_delay_ms(delay) delay_cycles(cpu_ms_2_cy(delay, F_CPU))
+#define cpu_delay_us(delay) delay_cycles(cpu_us_2_cy(delay, F_CPU))
+//! @}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYCLE_COUNTER_H_INCLUDED */
diff --git a/common2/services/delay/sam0/systick_counter.c b/common2/services/delay/sam0/systick_counter.c
new file mode 100644
index 00000000..5a007cdb
--- /dev/null
+++ b/common2/services/delay/sam0/systick_counter.c
@@ -0,0 +1,96 @@
+/**
+ * \file
+ *
+ * \brief ARM functions for busy-wait delay loops
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "delay.h"
+
+/**
+ * Value used to calculate ms delay. Default to be used with a 8MHz clock;
+ */
+static uint32_t cycles_per_ms = 8000000UL / 1000;
+static uint32_t cycles_per_us = 8000000UL / 1000000;
+
+/**
+ * \brief Initialize the delay driver.
+ *
+ * This must be called during start up to initialize the delay routine with
+ * the current used main clock. It must run any time the main CPU clock is changed.
+ */
+void delay_init(void)
+{
+	cycles_per_ms = system_gclk_gen_get_hz(0);
+	cycles_per_ms /= 1000;
+	cycles_per_us = cycles_per_ms / 1000;
+
+	SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk;
+}
+
+/**
+ * \brief Delay loop to delay at least n number of microseconds
+ *
+ * \param n  Number of microseconds to wait
+ */
+void delay_cycles_us(
+		uint32_t n)
+{
+	while (n--) {
+		/* Devide up to blocks of 10u */
+		delay_cycles(cycles_per_us);
+	}
+}
+
+/**
+ * \brief Delay loop to delay at least n number of milliseconds
+ *
+ * \param n  Number of milliseconds to wait
+ */
+void delay_cycles_ms(
+		uint32_t n)
+{
+	while (n--) {
+		/* Devide up to blocks of 1ms */
+		delay_cycles(cycles_per_ms);
+	}
+}
diff --git a/common2/services/delay/sam0/systick_counter.h b/common2/services/delay/sam0/systick_counter.h
new file mode 100644
index 00000000..06885e63
--- /dev/null
+++ b/common2/services/delay/sam0/systick_counter.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief ARM functions for busy-wait delay loops
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CYCLE_COUNTER_H_INCLUDED
+#define CYCLE_COUNTER_H_INCLUDED
+
+#include <compiler.h>
+#include <clock.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \name Convenience functions for busy-wait delay loops
+ *
+ * @{
+ */
+
+/**
+ * \brief Delay loop to delay n number of cycles
+ * Delay program execution for at least the specified number of CPU cycles.
+ *
+ * \param n  Number of cycles to delay
+ */
+static inline void delay_cycles(
+		const uint32_t n)
+{
+	if (n > 0) {
+		SysTick->LOAD = n;
+		SysTick->VAL = 0;
+
+		while (!(SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk)) {
+		};
+	}
+}
+
+void delay_cycles_us(uint32_t n);
+
+void delay_cycles_ms(uint32_t n);
+
+/**
+ * \brief Delay program execution for at least the specified number of microseconds.
+ *
+ * \param delay  number of microseconds to wait
+ */
+#define cpu_delay_us(delay)      delay_cycles_us(delay)
+
+/**
+ * \brief Delay program execution for at least the specified number of milliseconds.
+ *
+ * \param delay  number of milliseconds to wait
+ */
+#define cpu_delay_ms(delay)      delay_cycles_ms(delay)
+
+/**
+ * \brief Delay program execution for at least the specified number of seconds.
+ *
+ * \param delay  number of seconds to wait
+ */
+#define cpu_delay_s(delay)       delay_cycles_ms(1000 * delay)
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYCLE_COUNTER_H_INCLUDED */
diff --git a/common2/services/gfx_mono/docsrc/gfx_mono_overview.png b/common2/services/gfx_mono/docsrc/gfx_mono_overview.png
new file mode 100644
index 00000000..1e85b6b9
--- /dev/null
+++ b/common2/services/gfx_mono/docsrc/gfx_mono_overview.png
diff --git a/common2/services/gfx_mono/docsrc/gfx_mono_overview.svg b/common2/services/gfx_mono/docsrc/gfx_mono_overview.svg
new file mode 100644
index 00000000..a9485d61
--- /dev/null
+++ b/common2/services/gfx_mono/docsrc/gfx_mono_overview.svg
@@ -0,0 +1,492 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd">
+<!-- Generated by Microsoft Visio 11.0, SVG Export, v1.0 gfx_overview.svg Page-1 -->
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:v="http://schemas.microsoft.com/visio/2003/SVGExtensions/" width="8.26772in"
+		height="11.6929in" viewBox="0 0 595.276 841.89" xml:space="preserve" color-interpolation-filters="sRGB" class="st15">
+	<v:documentProperties v:langID="1033" v:viewMarkup="false"/>
+
+	<style type="text/css">
+	<![CDATA[
+		.st1 {visibility:visible}
+		.st2 {fill:#4979c0;fill-opacity:0.2;stroke:#4979c0;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:0.2;stroke-width:2.16}
+		.st3 {fill:url(#grad36-6);stroke:#000000;stroke-linecap:round;stroke-linejoin:round;stroke-width:2.16}
+		.st4 {fill:url(#grad36-12);stroke:#000000;stroke-linecap:round;stroke-linejoin:round;stroke-width:2.16}
+		.st5 {fill:#eff1e7;stroke:#000000;stroke-linecap:round;stroke-linejoin:round;stroke-width:2.16}
+		.st6 {fill:none;stroke:none;stroke-linecap:round;stroke-linejoin:round;stroke-width:0.72}
+		.st7 {fill:#000000;font-family:Arial;font-size:1.00001em}
+		.st8 {fill:url(#grad36-37);stroke:#000000;stroke-linecap:round;stroke-linejoin:round;stroke-width:2.16}
+		.st9 {font-size:1em}
+		.st10 {fill:url(#grad36-48);stroke:#000000;stroke-linecap:round;stroke-linejoin:round;stroke-width:2.16}
+		.st11 {fill:#000000;font-family:Arial;font-size:1.16666em}
+		.st12 {fill:url(#grad36-125);stroke:#000000;stroke-linecap:round;stroke-linejoin:round;stroke-width:2.16}
+		.st13 {marker-end:url(#mrkr4-135);stroke:#4677bf;stroke-linecap:round;stroke-linejoin:round;stroke-width:1.2}
+		.st14 {fill:#4677bf;fill-opacity:1;stroke:#4677bf;stroke-opacity:1;stroke-width:0.32258064516129}
+		.st15 {fill:none;fill-rule:evenodd;font-size:12;overflow:visible;stroke-linecap:square;stroke-miterlimit:3}
+	]]>
+	</style>
+
+	<defs id="Patterns_And_Gradients">
+		<radialGradient id="grad36-6" v:fillPattern="36" v:foreground="#e8eef7" v:background="#d0dcee" cx="0" cy="0" r="1">
+			<stop offset="0" style="stop-color:#e8eef7;stop-opacity:1"/>
+			<stop offset="1" style="stop-color:#d0dcee;stop-opacity:1"/>
+		</radialGradient>
+		<radialGradient id="grad36-12" v:fillPattern="36" v:foreground="#e8eef7" v:background="#ccffff" cx="0" cy="0" r="1">
+			<stop offset="0" style="stop-color:#e8eef7;stop-opacity:1"/>
+			<stop offset="1" style="stop-color:#ccffff;stop-opacity:1"/>
+		</radialGradient>
+		<radialGradient id="grad36-37" v:fillPattern="36" v:foreground="#e8eef7" v:background="#99cc00" cx="0" cy="0" r="1">
+			<stop offset="0" style="stop-color:#e8eef7;stop-opacity:1"/>
+			<stop offset="1" style="stop-color:#99cc00;stop-opacity:1"/>
+		</radialGradient>
+		<radialGradient id="grad36-48" v:fillPattern="36" v:foreground="#e8eef7" v:background="#00ccff" cx="0" cy="0" r="1">
+			<stop offset="0" style="stop-color:#e8eef7;stop-opacity:1"/>
+			<stop offset="1" style="stop-color:#00ccff;stop-opacity:1"/>
+		</radialGradient>
+		<radialGradient id="grad36-125" v:fillPattern="36" v:foreground="#e8eef7" v:background="#b0c5e3" cx="0" cy="0" r="1">
+			<stop offset="0" style="stop-color:#e8eef7;stop-opacity:1"/>
+			<stop offset="1" style="stop-color:#b0c5e3;stop-opacity:1"/>
+		</radialGradient>
+	</defs>
+	<defs id="Markers">
+		<g id="lend4">
+			<path d="M 2 1 L 0 0 L 2 -1 L 2 1 " style="stroke:none"/>
+		</g>
+		<marker id="mrkr4-135" class="st14" v:arrowType="4" v:arrowSize="2" v:setback="6.2" refX="-6.2" orient="auto"
+				markerUnits="strokeWidth">
+			<use xlink:href="#lend4" transform="scale(-3.1,-3.1) "/>
+		</marker>
+	</defs>
+	<g v:mID="4" v:index="1" v:groupContext="foregroundPage">
+		<title>Page-1</title>
+		<v:pageProperties v:drawingScale="0.0393701" v:pageScale="0.0393701" v:drawingUnits="24" v:shadowOffsetX="4.25197"
+				v:shadowOffsetY="-4.25197"/>
+		<v:layer v:name="Flowchart" v:index="0"/>
+		<v:layer v:name="Connector" v:index="1"/>
+		<g id="shape26-1" v:mID="26" v:groupContext="shape" v:layerMember="0" transform="translate(49.6063,-737.008)">
+			<title>Process.26</title>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<g id="shadow26-2" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="756.85" width="411.024" height="85.0394" class="st2"/>
+			</g>
+			<rect x="0" y="756.85" width="411.024" height="85.0394" class="st3"/>
+		</g>
+		<g id="shape16-7" v:mID="16" v:groupContext="shape" v:layerMember="0" transform="translate(35.4331,-164.409)">
+			<title>Process</title>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<g id="shadow16-8" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="297.638" width="439.37" height="544.252" class="st2"/>
+			</g>
+			<rect x="0" y="297.638" width="439.37" height="544.252" class="st4"/>
+		</g>
+		<g id="shape13-13" v:mID="13" v:groupContext="shape" v:layerMember="0" transform="translate(47.5984,-559.843)">
+			<title>Process.13</title>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<g id="shadow13-14" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="728.504" width="411.024" height="113.386" class="st2"/>
+			</g>
+			<rect x="0" y="728.504" width="411.024" height="113.386" class="st5"/>
+		</g>
+		<g id="shape5-17" v:mID="5" v:groupContext="shape" v:layerMember="0" transform="translate(47.5984,-432.283)">
+			<title>Process.5</title>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<g id="shadow5-18" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="728.504" width="411.024" height="113.386" class="st2"/>
+			</g>
+			<rect x="0" y="728.504" width="411.024" height="113.386" class="st5"/>
+		</g>
+		<g id="shape4-21" v:mID="4" v:groupContext="shape" v:layerMember="0" transform="translate(47.5984,-304.724)">
+			<title>Process.4</title>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<g id="shadow4-22" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="728.504" width="411.024" height="113.386" class="st2"/>
+			</g>
+			<rect x="0" y="728.504" width="411.024" height="113.386" class="st5"/>
+		</g>
+		<g id="shape3-25" v:mID="3" v:groupContext="shape" v:layerMember="0" transform="translate(49.6063,-177.165)">
+			<title>Process.3</title>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<g id="shadow3-26" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="728.504" width="411.024" height="113.386" class="st2"/>
+			</g>
+			<rect x="0" y="728.504" width="411.024" height="113.386" class="st5"/>
+		</g>
+		<g id="shape6-29" v:mID="6" v:groupContext="shape" transform="translate(58.1102,-207.638)">
+			<title>Sheet.6</title>
+			<desc>Output layer</desc>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="38.2677" cy="813.543" width="76.54" height="56.6929"/>
+			<rect x="0" y="785.197" width="76.5354" height="56.6929" class="st6"/>
+			<text x="5.59" y="817.14" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Output layer</text>		</g>
+		<g id="shape7-32" v:mID="7" v:groupContext="shape" v:layerMember="0" transform="translate(253.11,-215.433)">
+			<title>Process.6</title>
+			<desc>Display drivers</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="77.9528" cy="823.465" width="155.91" height="36.8504"/>
+			<g id="shadow7-33" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="805.039" width="155.906" height="36.8504" class="st2"/>
+			</g>
+			<rect x="0" y="805.039" width="155.906" height="36.8504" class="st8"/>
+			<text x="38.61" y="827.06" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Display drivers</text>		</g>
+		<g id="shape8-39" v:mID="8" v:groupContext="shape" transform="translate(43.937,-333.071)">
+			<title>Sheet.8</title>
+			<desc>Rendering layer</desc>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="38.2677" cy="813.543" width="76.54" height="56.6929"/>
+			<rect x="0" y="785.197" width="76.5354" height="56.6929" class="st6"/>
+			<text x="10.59" y="809.94" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Rendering <tspan
+						x="25.27" dy="1.2em" class="st9">layer</tspan></text>		</g>
+		<g id="shape9-43" v:mID="9" v:groupContext="shape" v:layerMember="0" transform="translate(277.205,-371.339)">
+			<title>Process.9</title>
+			<desc>Font support</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="53.8583" cy="823.465" width="107.72" height="36.8504"/>
+			<g id="shadow9-44" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="805.039" width="107.717" height="36.8504" class="st2"/>
+			</g>
+			<rect x="0" y="805.039" width="107.717" height="36.8504" class="st10"/>
+			<text x="20.16" y="827.06" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Font support</text>		</g>
+		<g id="shape10-50" v:mID="10" v:groupContext="shape" v:layerMember="0" transform="translate(253.11,-324.567)">
+			<title>Process.11</title>
+			<desc>Graphics primitives support</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="77.9528" cy="823.465" width="155.91" height="36.8504"/>
+			<g id="shadow10-51" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="805.039" width="155.906" height="36.8504" class="st2"/>
+			</g>
+			<rect x="0" y="805.039" width="155.906" height="36.8504" class="st8"/>
+			<text x="5.26" y="827.06" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Graphics primitives support</text>		</g>
+		<g id="shape11-56" v:mID="11" v:groupContext="shape" transform="translate(56.6929,-460.63)">
+			<title>Sheet.11</title>
+			<desc>Window layer</desc>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="38.2677" cy="813.543" width="76.54" height="56.6929"/>
+			<rect x="0" y="785.197" width="76.5354" height="56.6929" class="st6"/>
+			<text x="2.26" y="817.14" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Window layer</text>		</g>
+		<g id="shape12-59" v:mID="12" v:groupContext="shape" v:layerMember="0" transform="translate(255.118,-470.551)">
+			<title>Process.7</title>
+			<desc>Window manager</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="77.9528" cy="823.465" width="155.91" height="36.8504"/>
+			<g id="shadow12-60" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="805.039" width="155.906" height="36.8504" class="st2"/>
+			</g>
+			<rect x="0" y="805.039" width="155.906" height="36.8504" class="st10"/>
+			<text x="31.26" y="827.06" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Window manager</text>		</g>
+		<g id="shape14-65" v:mID="14" v:groupContext="shape" v:layerMember="0" transform="translate(201.26,-574.724)">
+			<title>Process.13</title>
+			<desc>Buttons</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="35.4331" cy="823.11" width="70.87" height="37.5591"/>
+			<g id="shadow14-66" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st2"/>
+			</g>
+			<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st10"/>
+			<text x="15.08" y="826.71" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Buttons</text>		</g>
+		<g id="shape15-71" v:mID="15" v:groupContext="shape" transform="translate(53.8583,-588.189)">
+			<title>Sheet.15</title>
+			<desc>Widget layer</desc>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="38.2677" cy="813.543" width="76.54" height="56.6929"/>
+			<rect x="0" y="785.197" width="76.5354" height="56.6929" class="st6"/>
+			<text x="4.93" y="817.14" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Widget layer</text>		</g>
+		<g id="shape17-74" v:mID="17" v:groupContext="shape" v:layerMember="0" transform="translate(201.26,-624.685)">
+			<title>Process.16</title>
+			<desc>Check box</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="35.4331" cy="823.11" width="70.87" height="37.5591"/>
+			<g id="shadow17-75" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st2"/>
+			</g>
+			<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st10"/>
+			<text x="7.08" y="826.71" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Check box</text>		</g>
+		<g id="shape19-80" v:mID="19" v:groupContext="shape" transform="translate(37.7165,-687.402)">
+			<title>Sheet.19</title>
+			<desc>Graphics system</desc>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="62.6378" cy="835.89" width="125.28" height="12"/>
+			<rect x="0" y="829.89" width="125.276" height="12" class="st6"/>
+			<text x="10.53" y="840.09" class="st11" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Graphics system</text>		</g>
+		<g id="shape1-83" v:mID="1" v:groupContext="shape" v:layerMember="0" transform="translate(286.299,-625.748)">
+			<title>Process.1</title>
+			<desc>Frames</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="35.4331" cy="823.11" width="70.87" height="37.5591"/>
+			<g id="shadow1-84" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st2"/>
+			</g>
+			<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st10"/>
+			<text x="15.09" y="826.71" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Frames</text>		</g>
+		<g id="shape2-89" v:mID="2" v:groupContext="shape" v:layerMember="0" transform="translate(287.717,-574.016)">
+			<title>Process.2</title>
+			<desc>Radio button</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="35.4331" cy="823.11" width="70.87" height="37.5591"/>
+			<g id="shadow2-90" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st2"/>
+			</g>
+			<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st10"/>
+			<text x="19.75" y="819.51" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Radio <tspan
+						x="18.74" dy="1.2em" class="st9">button</tspan></text>		</g>
+		<g id="shape18-96" v:mID="18" v:groupContext="shape" v:layerMember="0" transform="translate(488.976,-659.055)">
+			<title>Process.18</title>
+			<desc>Optional</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="35.4331" cy="820.63" width="70.87" height="42.5197"/>
+			<g id="shadow18-97" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="799.37" width="70.8661" height="42.5197" class="st2"/>
+			</g>
+			<rect x="0" y="799.37" width="70.8661" height="42.5197" class="st10"/>
+			<text x="9.35" y="824.83" class="st11" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Optional</text>		</g>
+		<g id="shape20-102" v:mID="20" v:groupContext="shape" v:layerMember="0" transform="translate(488.976,-604.134)">
+			<title>Process.20</title>
+			<desc>Required</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="35.4331" cy="820.63" width="70.87" height="42.5197"/>
+			<g id="shadow20-103" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="799.37" width="70.8661" height="42.5197" class="st2"/>
+			</g>
+			<rect x="0" y="799.37" width="70.8661" height="42.5197" class="st8"/>
+			<text x="7.02" y="824.83" class="st11" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Required</text>		</g>
+		<g id="shape21-108" v:mID="21" v:groupContext="shape" v:layerMember="0" transform="translate(369.921,-625.394)">
+			<title>Process.21</title>
+			<desc>Text</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="35.4331" cy="823.11" width="70.87" height="37.5591"/>
+			<g id="shadow21-109" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st2"/>
+			</g>
+			<rect x="0" y="804.331" width="70.8661" height="37.5591" class="st10"/>
+			<text x="23.76" y="826.71" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Text</text>		</g>
+		<g id="shape22-114" v:mID="22" v:groupContext="shape" v:layerMember="0" transform="translate(201.969,-760.217)">
+			<title>Process.22</title>
+			<desc>Custom widgets</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="53.1496" cy="822.579" width="106.3" height="38.622"/>
+			<g id="shadow22-115" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="803.268" width="106.299" height="38.622" class="st2"/>
+			</g>
+			<rect x="0" y="803.268" width="106.299" height="38.622" class="st10"/>
+			<text x="10.47" y="826.18" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Custom widgets</text>		</g>
+		<g id="shape23-120" v:mID="23" v:groupContext="shape" v:layerMember="0" transform="translate(49.6063,-42.5197)">
+			<title>Process.23</title>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<g id="shadow23-121" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="742.677" width="411.024" height="99.2126" class="st2"/>
+			</g>
+			<rect x="0" y="742.677" width="411.024" height="99.2126" class="st12"/>
+		</g>
+		<g id="shape24-126" v:mID="24" v:groupContext="shape" transform="translate(70.8661,-63.7795)">
+			<title>Sheet.24</title>
+			<desc>Hardware layer</desc>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="38.2677" cy="813.543" width="76.54" height="56.6929"/>
+			<rect x="0" y="785.197" width="76.5354" height="56.6929" class="st6"/>
+			<text x="12.27" y="809.94" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Hardware <tspan
+						x="25.27" dy="1.2em" class="st9">layer</tspan></text>		</g>
+		<g id="shape25-130" v:mID="25" v:groupContext="shape" v:layerMember="1" transform="translate(248.031,-141.732)">
+			<title>Dynamic connector</title>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<path d="M7.09 841.89 L7.09 826.65" class="st13"/>
+		</g>
+		<g id="shape27-136" v:mID="27" v:groupContext="shape" transform="translate(60.9449,-751.181)">
+			<title>Sheet.27</title>
+			<desc>Application</desc>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="38.2677" cy="813.543" width="76.54" height="56.6929"/>
+			<rect x="0" y="785.197" width="76.5354" height="56.6929" class="st6"/>
+			<text x="8.92" y="817.14" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Application</text>		</g>
+		<g id="shape28-139" v:mID="28" v:groupContext="shape" v:layerMember="0" transform="translate(177.165,-73.7008)">
+			<title>Process.28</title>
+			<desc>Display interface drivers</desc>
+			<v:custProps>
+				<v:cp v:nameU="Cost" v:lbl="Cost" v:type="7" v:format="@" v:langID="1033"/>
+				<v:cp v:nameU="Duration" v:lbl="Duration" v:type="2" v:langID="1033"/>
+				<v:cp v:nameU="Resources" v:lbl="Resources" v:langID="1033"/>
+			</v:custProps>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<v:textBlock v:margins="rect(2,2,2,2)" v:tabSpace="42.5197"/>
+			<v:textRect cx="77.9528" cy="823.465" width="155.91" height="36.8504"/>
+			<g id="shadow28-140" v:groupContext="shadow" v:shadowOffsetX="4.25197" v:shadowOffsetY="-4.25197"
+					transform="matrix(1,0,0,1,4.25197,4.25197)" class="st1">
+				<rect x="0" y="805.039" width="155.906" height="36.8504" class="st2"/>
+			</g>
+			<rect x="0" y="805.039" width="155.906" height="36.8504" class="st8"/>
+			<text x="13.93" y="827.06" class="st7" v:langID="1044"><v:paragraph v:horizAlign="1"/><v:tabList/>Display interface drivers</text>		</g>
+		<g id="shape29-145" v:mID="29" v:groupContext="shape" v:layerMember="1" transform="translate(248.031,-708.661)">
+			<title>Dynamic connector.29</title>
+			<v:userDefs>
+				<v:ud v:nameU="visVersion" v:val="VT0(11):26"/>
+			</v:userDefs>
+			<path d="M7.09 841.89 L7.09 820.98" class="st13"/>
+		</g>
+	</g>
+</svg>
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_null/doxyfile.doxygen b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_null/doxyfile.doxygen
new file mode 100644
index 00000000..3c03d912
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_null/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "GFX Monochrome - NULL display driver"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../gfx_mono_null.c ../../gfx_mono_null.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_null/doxygen_module_mainpage.h b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_null/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_null/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_ug_2832hsweg04/doxyfile.doxygen b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_ug_2832hsweg04/doxyfile.doxygen
new file mode 100644
index 00000000..36e46c7f
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_ug_2832hsweg04/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "GFX Monochrome - UG-2832HSWEG04 OLED panel support"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../gfx_mono_ug_2832hsweg04.c ../../gfx_mono_ug_2832hsweg04.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 GFX_MONO_UG_2832HSWEG04=1
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_ug_2832hsweg04/doxygen_module_mainpage.h b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_ug_2832hsweg04/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.display_ug_2832hsweg04/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.font/doxyfile.doxygen b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.font/doxyfile.doxygen
new file mode 100644
index 00000000..1d3ad7ec
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.font/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "GFX Monochrome - System Font"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../gfx_mono_text.c ../../sysfont.c ../../gfx_mono_text.h ../../sysfont.h ../../module_config/conf_sysfont.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = ../../docsrc
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.font/doxygen_module_mainpage.h b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.font/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.font/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.framebuffer/doxyfile.doxygen b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.framebuffer/doxyfile.doxygen
new file mode 100644
index 00000000..7932baf6
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.framebuffer/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "GFX Monochrome - Framebuffer Device"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../gfx_mono_framebuffer.c ../../gfx_mono.h ../../gfx_mono_framebuffer.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.framebuffer/doxygen_module_mainpage.h b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.framebuffer/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.framebuffer/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.generic/doxyfile.doxygen b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.generic/doxyfile.doxygen
new file mode 100644
index 00000000..7f0f2a63
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.generic/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "GFX Monochrome - Graphical Primitives (pixel, line, square, circle)"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../gfx_mono_generic.c ../../gfx_mono_generic.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.generic/doxygen_module_mainpage.h b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.generic/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.generic/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.menu/doxyfile.doxygen b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.menu/doxyfile.doxygen
new file mode 100644
index 00000000..8e954201
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.menu/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "GFX Monochrome - Menu System"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../gfx_mono_menu.c ../../gfx_mono_menu.h ../../module_config/conf_menu.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.menu/doxygen_module_mainpage.h b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.menu/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.menu/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.spinctrl/doxyfile.doxygen b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.spinctrl/doxyfile.doxygen
new file mode 100644
index 00000000..72aaaa79
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.spinctrl/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "GFX Monochrome - Spinner/Spin control widget"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../gfx_mono_spinctrl.c ../../gfx_mono_spinctrl.h ../../module_config/conf_spinctrl.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.spinctrl/doxygen_module_mainpage.h b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.spinctrl/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono.spinctrl/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono/doxyfile.doxygen b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono/doxyfile.doxygen
new file mode 100644
index 00000000..f5a63a71
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono/doxyfile.doxygen
@@ -0,0 +1,1645 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "GFX Monochrome - Monochrome Graphic Library"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = .
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                += asf_license_start=" "
+ALIASES                += asf_license_stop=" "
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = YES
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "[WARNING]$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = doxygen_module_mainpage.h ../../gfx_mono.h
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.h \
+                         *.s \
+                         *.S
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           = ./ 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = RTF
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = YES
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           = ../..
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = gif
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/common2/services/gfx_mono/doxygen/common2.services.gfx_mono/doxygen_module_mainpage.h b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono/doxygen_module_mainpage.h
new file mode 100644
index 00000000..26566747
--- /dev/null
+++ b/common2/services/gfx_mono/doxygen/common2.services.gfx_mono/doxygen_module_mainpage.h
@@ -0,0 +1,58 @@
+
+/**
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ * \mainpage
+ *
+ * \section intro Introduction
+ *  This documentation has been automatically generated, and documents the source
+ *  code found in the Atmel Software Framework (ASF). <p>
+ *  Use the above menu to navigate in the documentation, or use the links below: <br>
+ *  <ul>
+ *  <li> <a href="globals_func.html">Functions</a>
+ *  <li> <a href="annotated.html">Data structures</a>
+ *  <li> <a href="globals_type.html">Defines</a>
+ *  </ul>
+ *
+ *  \section main_licence License
+ *  <ul>
+ *  <li>\ref License
+ *  </ul>
+ * \section contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ *
+ */
diff --git a/common2/services/gfx_mono/example_spinctrl/example_spinctrl.c b/common2/services/gfx_mono/example_spinctrl/example_spinctrl.c
new file mode 100644
index 00000000..ebd5cbc8
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/example_spinctrl.c
@@ -0,0 +1,158 @@
+/**
+ * \file
+ *
+ * \brief Example application for GFX Monochrome spinner widget
+ *
+ * Copyright (c) 2011-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <asf.h>
+#include <stdio.h>
+#include <conf_spinctrl.h>
+#include <conf_sysfont.h>
+
+/**
+ * \page asfdoc_common2_gfx_mono_spinner_example GFX Mono Spinner Example
+ *
+ * \section asfdoc_common2_spinctrl_example_intro Introduction
+ * This simple example shows how to set up a collection of spinners and display
+ * them on the screen.
+ *
+ * \section asfdoc_common2_spinctrl_example_files Main files:
+ * - \ref example_spinctrl.c : the example itself.
+ * - \ref conf_ssd1306.h
+ * - \ref conf_board.h
+ * - \ref conf_clocks.h
+ * - \ref conf_sysfont.h
+ * - \ref conf_spinctrl.h
+ *
+ * \section asfdoc_common2_spinctrl_example_deviceinfo Device Info
+ * All SAM devices can be used.
+ * This example has been tested with the following setup:
+ * - SAM D20 Xplained Pro
+ * - SAM D21 Xplained Pro
+ * - SAM R21 Xplained Pro
+ * - SAM L21 Xplained Pro
+ * - SAM L22 Xplained Pro
+ * - SAM R30 Xplained Pro
+ *
+ * \section asfdoc_common2_spinctrl_example_description Description of the example application
+ * This example application will initialize string spinner and two integer
+ * spinners, set up a spin collection with the spinners and display them on
+ * the screen.
+ *
+ * \section asfdoc_common2_spinctrl_example_dependencies Dependencies
+ * Relevant module dependencies for this application are:
+ * - \ref asfdoc_common2_gfx_mono
+ * - \ref asfdoc_common2_gfx_mono_font
+ * - \ref asfdoc_common2_gfx_mono_spinctrl
+ *
+ * \section asfdoc_common2_spinctrl_example_compinfo Compilation Info
+ * This software was written for the GNU GCC and IAR.
+ * Other compilers may or may not work.
+ *
+ * \section asfdoc_common2_spinctrl_example_contactinfo Contact Information
+ * For further information, visit
+ * <A href="http://www.atmel.com/">Atmel</A>.\n
+ */
+
+PROGMEM_DECLARE(char, spinnertitle[]) = "Strings:";
+PROGMEM_DECLARE(char, spinnertitle2[]) = "Numbers:";
+PROGMEM_DECLARE(char, spinnertitle3[]) = "Numbers2:";
+PROGMEM_DECLARE(char, spinner_choice1[]) = "String";
+PROGMEM_DECLARE(char, spinner_choice2[]) = "String 2";
+PROGMEM_DECLARE(char, spinner_choice3[]) = "String 3";
+PROGMEM_DECLARE(char, spinner_choice4[]) = "String 4";
+
+PROGMEM_STRING_T spinner_choicestrings[] = {
+	spinner_choice1,
+	spinner_choice2,
+	spinner_choice3,
+	spinner_choice4,
+};
+
+
+/**
+ * \brief Main entry of example application
+ */
+int main(void)
+{
+	struct gfx_mono_spinctrl spinner1;
+	struct gfx_mono_spinctrl spinner2;
+	struct gfx_mono_spinctrl spinner3;
+	struct gfx_mono_spinctrl_spincollection spinners;
+
+	/**
+	 * Starts off by initializing the system clock before configuring the
+	 * board and the monochrome graphical system.
+	 */
+	system_init();
+	gfx_mono_init();
+
+	int16_t tmp[3];
+
+	// Initialize spinners
+	gfx_mono_spinctrl_init(&spinner1, SPINTYPE_STRING, spinnertitle,
+			spinner_choicestrings, 0, 3, 0);
+	gfx_mono_spinctrl_init(&spinner2, SPINTYPE_INTEGER,
+			spinnertitle2, NULL, -60, -41, 0);
+	gfx_mono_spinctrl_init(&spinner3, SPINTYPE_INTEGER,
+			spinnertitle3, NULL, 19999, 20200, 0);
+
+	// Initialize spincollection
+	gfx_mono_spinctrl_spincollection_init(&spinners);
+
+	// Add spinners to spincollection
+	gfx_mono_spinctrl_spincollection_add_spinner(&spinner1, &spinners);
+	gfx_mono_spinctrl_spincollection_add_spinner(&spinner2, &spinners);
+	gfx_mono_spinctrl_spincollection_add_spinner(&spinner3, &spinners);
+
+	// Show spincollection on screen
+	gfx_mono_spinctrl_spincollection_show(&spinners);
+
+	// Spincollection is now ready to process input from user
+
+	while(1) {
+		gfx_mono_spinctrl_spincollection_process_key(&spinners, GFX_MONO_SPINCTRL_KEYCODE_DOWN, tmp);
+		delay_s(1);
+		gfx_mono_spinctrl_spincollection_process_key(&spinners, GFX_MONO_SPINCTRL_KEYCODE_ENTER, tmp);
+		delay_s(1);
+	}
+}
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..55b58086
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_board.h
@@ -0,0 +1,49 @@
+/**
+ * \file
+ *
+ * \brief XMEGA-C3 Xplained board configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..47326488
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,172 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..9def00ab
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 SPI configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_spinctrl.h b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_spinctrl.h
new file mode 100644
index 00000000..2090b6a1
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..c2e70e53
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D20 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..05daa73b
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..b7e02dc2
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..fc021f16
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_spinctrl_flash.elf
+TARGET_SRAM = example_spinctrl_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_spinctrl/example_spinctrl.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_spinctrl.c      \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_spinctrl         \
+       common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..b7e02dc2
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl.eww b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl.eww
new file mode 100644
index 00000000..f37ccc97
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_spinctrl_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl_flash.ewd b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl_flash.ewd
new file mode 100644
index 00000000..720c5d74
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl_flash.ewp b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl_flash.ewp
new file mode 100644
index 00000000..3cfd4a03
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd20_xplained_pro/iar/example_spinctrl_flash.ewp
@@ -0,0 +1,2643 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<group>
+					<name>example_spinctrl</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_spinctrl.c</name>
+					</file>
+					<group>
+						<name>samd20_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spinctrl.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd20_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd20</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..ad644c05
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..2a59aa71
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_clocks.h
@@ -0,0 +1,197 @@
+/**

+ * \file

+ *

+ * \brief SAM D21 Clock configuration

+ *

+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.

+ *

+ * \asf_license_start

+ *

+ * \page License

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright notice,

+ *    this list of conditions and the following disclaimer.

+ *

+ * 2. Redistributions in binary form must reproduce the above copyright notice,

+ *    this list of conditions and the following disclaimer in the documentation

+ *    and/or other materials provided with the distribution.

+ *

+ * 3. The name of Atmel may not be used to endorse or promote products derived

+ *    from this software without specific prior written permission.

+ *

+ * 4. This software may only be redistributed and used in connection with an

+ *    Atmel microcontroller product.

+ *

+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED

+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR

+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ * \asf_license_stop

+ *

+ */

+/*

+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>

+ */

+#include <clock.h>

+

+#ifndef CONF_CLOCKS_H_INCLUDED

+#  define CONF_CLOCKS_H_INCLUDED

+

+/* System clock bus configuration */

+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false

+#  define CONF_CLOCK_FLASH_WAIT_STATES            0

+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+

+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */

+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1

+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true

+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false

+

+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */

+#  define CONF_CLOCK_XOSC_ENABLE                  false

+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL

+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL

+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768

+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true

+#  define CONF_CLOCK_XOSC_ON_DEMAND               true

+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false

+

+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */

+#  define CONF_CLOCK_XOSC32K_ENABLE               false

+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL

+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536

+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false

+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false

+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true

+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true

+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false

+

+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */

+#  define CONF_CLOCK_OSC32K_ENABLE                false

+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130

+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true

+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true

+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true

+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false

+

+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */

+#  define CONF_CLOCK_DFLL_ENABLE                  false

+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN

+#  define CONF_CLOCK_DFLL_ON_DEMAND               false

+

+/* DFLL open loop mode configuration */

+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)

+

+/* DFLL closed loop mode configuration */

+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1

+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6

+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true

+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true

+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true

+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true

+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)

+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)

+

+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */

+#  define CONF_CLOCK_DPLL_ENABLE                  false

+#  define CONF_CLOCK_DPLL_ON_DEMAND               true

+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false

+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false

+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false

+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false

+

+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT

+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K

+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT

+

+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768

+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1

+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000

+

+/* DPLL GCLK reference configuration */

+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1

+/* DPLL GCLK lock timer configuration */

+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1

+

+/* Set this to true to configure the GCLK when running clocks_init. If set to

+ * false, none of the GCLK generators will be configured in clocks_init(). */

+#  define CONF_CLOCK_CONFIGURE_GCLK               true

+

+/* Configure GCLK generator 0 (Main Clock) */

+#  define CONF_CLOCK_GCLK_0_ENABLE                true

+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_0_PRESCALER             1

+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 1 */

+#  define CONF_CLOCK_GCLK_1_ENABLE                false

+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_1_PRESCALER             1

+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 2 (RTC) */

+#  define CONF_CLOCK_GCLK_2_ENABLE                false

+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K

+#  define CONF_CLOCK_GCLK_2_PRESCALER             32

+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 3 */

+#  define CONF_CLOCK_GCLK_3_ENABLE                true

+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_3_PRESCALER             16

+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 4 */

+#  define CONF_CLOCK_GCLK_4_ENABLE                false

+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_4_PRESCALER             1

+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 5 */

+#  define CONF_CLOCK_GCLK_5_ENABLE                false

+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_5_PRESCALER             1

+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 6 */

+#  define CONF_CLOCK_GCLK_6_ENABLE                false

+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_6_PRESCALER             1

+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 7 */

+#  define CONF_CLOCK_GCLK_7_ENABLE                false

+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_7_PRESCALER             1

+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 8 */

+#  define CONF_CLOCK_GCLK_8_ENABLE                false

+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_8_PRESCALER             1

+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false

+

+#endif /* CONF_CLOCKS_H_INCLUDED */

diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_spinctrl.h b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_spinctrl.h
new file mode 100644
index 00000000..783d8f6d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..028279c9
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..05daa73b
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..58de2a13
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..fa51170f
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_spinctrl_flash.elf
+TARGET_SRAM = example_spinctrl_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_spinctrl/example_spinctrl.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_spinctrl.c      \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_spinctrl         \
+       common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..58de2a13
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl.eww b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl.eww
new file mode 100644
index 00000000..f37ccc97
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_spinctrl_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl_flash.ewd b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl_flash.ewd
new file mode 100644
index 00000000..805e4868
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl_flash.ewp b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl_flash.ewp
new file mode 100644
index 00000000..8d355b86
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samd21_xplained_pro/iar/example_spinctrl_flash.ewp
@@ -0,0 +1,2682 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<group>
+					<name>example_spinctrl</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_spinctrl.c</name>
+					</file>
+					<group>
+						<name>samd21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spinctrl.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..df421904
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_spinctrl.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_spinctrl.h
new file mode 100644
index 00000000..783d8f6d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..028279c9
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..05daa73b
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..63933744
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..b3a7f53d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_spinctrl_flash.elf
+TARGET_SRAM = example_spinctrl_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_spinctrl/example_spinctrl.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_spinctrl.c      \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/saml21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_spinctrl         \
+       common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include                    \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..63933744
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl.eww b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl.eww
new file mode 100644
index 00000000..f37ccc97
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_spinctrl_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl_flash.ewd b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl_flash.ewd
new file mode 100644
index 00000000..8c294687
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl_flash.ewp b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl_flash.ewp
new file mode 100644
index 00000000..4c6e0f55
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro/iar/example_spinctrl_flash.ewp
@@ -0,0 +1,2574 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<group>
+					<name>example_spinctrl</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_spinctrl.c</name>
+					</file>
+					<group>
+						<name>saml21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spinctrl.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_board.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_clocks.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..2f1fda00
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,201 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_spi.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_spinctrl.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_spinctrl.h
new file mode 100644
index 00000000..783d8f6d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_ssd1306.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_ssd1306.h
new file mode 100644
index 00000000..028279c9
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_sysfont.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_sysfont.h
new file mode 100644
index 00000000..05daa73b
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/Makefile b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/asf.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..63933744
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/config.mk b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..d006c175
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18b
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_spinctrl_flash.elf
+TARGET_SRAM = example_spinctrl_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_spinctrl/example_spinctrl.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_spinctrl.c      \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/saml21_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_spinctrl         \
+       common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include_b                  \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML21J18B__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/asf.h b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..63933744
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl.eww b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl.eww
new file mode 100644
index 00000000..f37ccc97
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_spinctrl_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl_flash.ewd b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl_flash.ewd
new file mode 100644
index 00000000..0b552d05
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18b-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl_flash.ewp b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl_flash.ewp
new file mode 100644
index 00000000..037a2772
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml21_xplained_pro_b/iar/example_spinctrl_flash.ewp
@@ -0,0 +1,2616 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<group>
+					<name>example_spinctrl</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_spinctrl.c</name>
+					</file>
+					<group>
+						<name>saml21_xplained_pro_b</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spinctrl.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include_b</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_spinctrl.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_spinctrl.h
new file mode 100644
index 00000000..fbdca96d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..f61388e1
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..05daa73b
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..52232f09
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..ecb980ec
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_spinctrl_flash.elf
+TARGET_SRAM = example_spinctrl_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_spinctrl/example_spinctrl.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_spinctrl.c      \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/saml22_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_spinctrl         \
+       common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO                       \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..52232f09
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl.eww b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl.eww
new file mode 100644
index 00000000..f37ccc97
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_spinctrl_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl_flash.ewd b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl_flash.ewd
new file mode 100644
index 00000000..222fe2ce
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl_flash.ewp b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl_flash.ewp
new file mode 100644
index 00000000..ead1add2
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro/iar/example_spinctrl_flash.ewp
@@ -0,0 +1,2601 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<group>
+					<name>example_spinctrl</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_spinctrl.c</name>
+					</file>
+					<group>
+						<name>saml22_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spinctrl.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_board.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_clocks.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_spi.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_spinctrl.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_spinctrl.h
new file mode 100644
index 00000000..fbdca96d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_ssd1306.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_ssd1306.h
new file mode 100644
index 00000000..f61388e1
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_sysfont.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_sysfont.h
new file mode 100644
index 00000000..846cd78a
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/Makefile b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/asf.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..52232f09
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/config.mk b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..c47f6ecf
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_spinctrl_flash.elf
+TARGET_SRAM = example_spinctrl_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_spinctrl/example_spinctrl.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_spinctrl.c      \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/saml22_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_spinctrl         \
+       common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO_B                     \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/asf.h b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..52232f09
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl.eww b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl.eww
new file mode 100644
index 00000000..f37ccc97
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_spinctrl_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl_flash.ewd b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl_flash.ewd
new file mode 100644
index 00000000..5f2ec590
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl_flash.ewp b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl_flash.ewp
new file mode 100644
index 00000000..0a2cefe6
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/saml22_xplained_pro_b/iar/example_spinctrl_flash.ewp
@@ -0,0 +1,2601 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<group>
+					<name>example_spinctrl</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_spinctrl.c</name>
+					</file>
+					<group>
+						<name>saml22_xplained_pro_b</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spinctrl.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..814b959e
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..d7bb7875
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                true
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             16
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..b4187ac5
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_spinctrl.h b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_spinctrl.h
new file mode 100644
index 00000000..783d8f6d
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..d58c8f4a
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM R21 Xplained Pro
+#  define SSD1306_SPI                 EXT1_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT1_PIN_5
+#  define SSD1306_RES_PIN             EXT1_PIN_10
+#  define SSD1306_CS_PIN              EXT1_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..05daa73b
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..58de2a13
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..33def699
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr21g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_spinctrl_flash.elf
+TARGET_SRAM = example_spinctrl_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_spinctrl/example_spinctrl.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_spinctrl.c      \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samr21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr21/source/gcc/startup_samr21.c \
+       sam0/utils/cmsis/samr21/source/system_samr21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_spinctrl         \
+       common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samr21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr21/include                    \
+       sam0/utils/cmsis/samr21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR21_XPLAINED_PRO                       \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMR21G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..58de2a13
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl.eww b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl.eww
new file mode 100644
index 00000000..f37ccc97
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_spinctrl_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl_flash.ewd b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl_flash.ewd
new file mode 100644
index 00000000..8b8a4976
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR21\samr21g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl_flash.ewp b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl_flash.ewp
new file mode 100644
index 00000000..26a78c21
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr21_xplained_pro/iar/example_spinctrl_flash.ewp
@@ -0,0 +1,2550 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<group>
+					<name>example_spinctrl</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_spinctrl.c</name>
+					</file>
+					<group>
+						<name>samr21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spinctrl.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/iar/startup_samr21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_board.h
new file mode 100644
index 00000000..29176c86
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..2fa7493a
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..f44cac37
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 SPI configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_spinctrl.h b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_spinctrl.h
new file mode 100644
index 00000000..122c7176
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..41b12471
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..4cbfcaf3
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..3baebcda
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..a27dc1b0
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr30g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_spinctrl_flash.elf
+TARGET_SRAM = example_spinctrl_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_spinctrl/example_spinctrl.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_spinctrl.c      \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samr30_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samr30/clock.c     \
+       sam0/drivers/system/clock/clock_samr30/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr30/source/gcc/startup_samr30.c \
+       sam0/utils/cmsis/samr30/source/system_samr30.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_spinctrl         \
+       common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samr30_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samr30             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr30 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr30/include                    \
+       sam0/utils/cmsis/samr30/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR30_XPLAINED_PRO                       \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMR30G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..3baebcda
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/asf.h
@@ -0,0 +1,113 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - Spinner/Spin control widget

+#include <gfx_mono_spinctrl.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl.eww b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl.eww
new file mode 100644
index 00000000..f37ccc97
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_spinctrl_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl_flash.ewd b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl_flash.ewd
new file mode 100644
index 00000000..5527dd8f
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR30\samr30g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl_flash.ewp b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl_flash.ewp
new file mode 100644
index 00000000..fa2bb5ad
--- /dev/null
+++ b/common2/services/gfx_mono/example_spinctrl/samr30_xplained_pro/iar/example_spinctrl_flash.ewp
@@ -0,0 +1,2544 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_spinctrl_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_spinctrl_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<group>
+					<name>example_spinctrl</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_spinctrl.c</name>
+					</file>
+					<group>
+						<name>samr30_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spinctrl.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_spinctrl.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr30</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/iar/startup_samr30.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr30_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/example_sysfont.c b/common2/services/gfx_mono/example_sysfont/example_sysfont.c
new file mode 100644
index 00000000..a3abc6ce
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/example_sysfont.c
@@ -0,0 +1,136 @@
+/**
+ * \file
+ *
+ * \brief Example application for GFX Monochrome System Font (sysfont)
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <asf.h>
+/**
+ * \page asfdoc_common2_gfx_mono_sysfont_example GFX Mono Font Example
+ *
+ * \section asfdoc_common2_sysfont_example_intro Introduction
+ * This is an example application for the \ref asfdoc_common2_gfx_mono_font. It will print a
+ * string, with line break, on the screen and scroll it.
+ *
+ * \section files Main Files
+ * - \ref example_sysfont.c
+ * - \ref conf_board.h
+ * - \ref conf_clocks.h
+ * - \ref conf_ssd1306.h
+ * - \ref conf_sysfont.h
+ *
+ * \section asfdoc_common2_sysfont_example_device_info Device Info
+ * This example has been tested with the following setup:
+ * - SAM D20 Xplained Pro
+ * - SAM D21 Xplained Pro
+ * - SAM R21 Xplained Pro
+ * - SAM D11 Xplained Pro
+ * - SAM L21 Xplained Pro
+ * - SAM L22 Xplained Pro
+ *
+ * \section asfdoc_common2_sysfont_example_description Description of the example application
+ * The example application will upon power up display several text strings on the
+ * display; "PASSION...".
+ *
+ * \section asfdoc_common2_sysfont_example_dependencies Dependencies
+ * Relevant module dependencies for this application are:
+ * - \ref asfdoc_common2_gfx_mono_font
+ *
+ * \section asfdoc_common2_sysfont_example_compinfo Compilation info
+ * This software was written for the GNU GCC and IAR. Other compilers
+ * may or may not work.
+ *
+ * \section asfdoc_common2_sysfont_example_contactinfo Contact Information
+ * For further information, visit <a href="http://www.atmel.com/">Atmel</a>.\n
+ */
+
+#define LINES 8
+
+char string[LINES][24] = {
+	{"          PASSION   \r\n"},
+	{"    INTEGRITY       \r\n"},
+	{"        TEAMWORK    \r\n"},
+	{"   ACHIEVEMENT      \r\n"},
+	{" ACCOUNTABILITY     \r\n"},
+	{"                    \r\n"},
+	{"                    \r\n"},
+	{"                    \r\n"},
+};
+
+/**
+ * \brief Main entry of example application
+ */
+int main(void)
+{
+	/**
+	 * Starts off by initializing the system clock before configuring the
+	 * board and the monochrome graphical system.
+	 */
+	system_init();
+	gfx_mono_init();
+
+	uint8_t start_line_address = 0;
+	uint8_t scroll = 0;
+	uint32_t line = 0;
+
+	/**
+	 * After initialization the example will write the Star Wars opening scrolling text.
+	 * Use the system font sysfont. Afterwards the text will be scrolled forever.
+	 */
+
+	while (true) {
+		if (++start_line_address%8 == 0) {
+			scroll = 1;
+			gfx_mono_draw_string(string[line%LINES],0, ((line)%8)*8, &sysfont);
+			line++;
+		} else if (start_line_address % 7 != 0) {
+			delay_ms(100);
+		}
+
+		if ( scroll != 0 ) {
+			ssd1306_set_display_start_line_address(start_line_address-8);
+		} else {
+			gfx_mono_draw_string(string[line%LINES],0, ((line)%8)*8, &sysfont);
+			line++;
+		}
+	}
+}
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_board.h
new file mode 100644
index 00000000..41c619a1
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..7ab09702
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_clocks.h
@@ -0,0 +1,177 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..3fa424f7
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D11 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..f2d19627
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D11 Xplained Pro
+#  define SSD1306_SPI                 EXT1_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT1_PIN_5
+#  define SSD1306_RES_PIN             EXT1_PIN_10
+#  define SSD1306_CS_PIN              EXT1_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     EXT1_SPI_SERCOM_PINMUX_PAD1
+#  define SSD1306_SPI_PINMUX_PAD2     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..53bf1e4a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..39cb821c
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD11

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..4739fe7c
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd11d14am
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samd11_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd09_d10_d11/clock.c \
+       sam0/drivers/system/clock/clock_samd09_d10_d11/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd11/source/gcc/startup_samd11.c \
+       sam0/utils/cmsis/samd11/source/system_samd11.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/samd11_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samd11_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd09_d10_d11     \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd10_d11 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd11/include                    \
+       sam0/utils/cmsis/samd11/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd11/gcc/samd11d14am_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd11/gcc/samd11d14am_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd11_xplained_pro/debug_scripts/gcc/samd11_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd11_xplained_pro/debug_scripts/gcc/samd11_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD11_XPLAINED_PRO                       \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD11D14AM__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..39cb821c
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD11

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont.eww
new file mode 100644
index 00000000..2cd7c219
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont.eww
@@ -0,0 +1,6 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..bd8fe1c3
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd11_xplained_pro/debug_scripts/iar/samd11_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD11\ATSAMD11D14AM.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD11\samd11d14am-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd11_xplained_pro/debug_scripts/iar/samd11_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD11\ATSAMD11D14AM.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..0360fe86
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd11_xplained_pro/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2509 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD11D14AM	Atmel ATSAMD11D14AM</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD11D14AM__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD11D14AM__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd11/iar/samd11d14am_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD11D14AM	Atmel ATSAMD11D14AM</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD11D14AM__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD11D14AM__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAMD11_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd11/iar/samd11d14am_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samd11_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd11</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source/iar/startup_samd11.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/source/system_samd11.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/component/gclk.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/instance/rtc.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11d14am.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14as.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11d14am.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/pio/samd11c14a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11d14as.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11c14a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd11/include/samd11d14au.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd09_d10_d11</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd09_d10_d11/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd10_d11</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd10_d11/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd11_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd11_xplained_pro/samd11_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_board.h
new file mode 100644
index 00000000..55b58086
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_board.h
@@ -0,0 +1,49 @@
+/**
+ * \file
+ *
+ * \brief XMEGA-C3 Xplained board configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..47326488
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_clocks.h
@@ -0,0 +1,172 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 Clock configuration
+ *
+ * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..9def00ab
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D20 SPI configuration
+ *
+ * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..c2e70e53
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D20 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..53bf1e4a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..dbdf0207
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..669c9484
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd20j18
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samd20_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd20/clock.c     \
+       sam0/drivers/system/clock/clock_samd20/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd20/source/gcc/startup_samd20.c \
+       sam0/utils/cmsis/samd20/source/system_samd20.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/samd20_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samd20_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd20             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd20 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd20/include                    \
+       sam0/utils/cmsis/samd20/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd20/gcc/samd20j18_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd20/gcc/samd20j18_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd20_xplained_pro/debug_scripts/gcc/samd20_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD20_XPLAINED_PRO                       \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD20J18__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..dbdf0207
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD20

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont.eww
new file mode 100644
index 00000000..011d8580
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont.eww
@@ -0,0 +1,9 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+	<project>
+		<path>$WS_DIR$\example_sysfont_sram.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..720c5d74
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..64707c7e
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2638 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samd20_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd20_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd20</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_sram.ewd b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_sram.ewd
new file mode 100644
index 00000000..0013e4fa
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_sram.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_sram.ewp b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_sram.ewp
new file mode 100644
index 00000000..61821d40
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd20_xplained_pro/iar/example_sysfont_sram.ewp
@@ -0,0 +1,2638 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD20J18	Atmel ATSAMD20J18</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD20_XPLAINED_PRO</state>
+					<state>__SAMD20J18__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samd20_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd20_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd20</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd20</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..ad644c05
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..875c8c40
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+

+/**

+ * \file

+ *

+ * \brief SAM D21 Clock configuration

+ *

+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.

+ *

+ * \asf_license_start

+ *

+ * \page License

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright notice,

+ *    this list of conditions and the following disclaimer.

+ *

+ * 2. Redistributions in binary form must reproduce the above copyright notice,

+ *    this list of conditions and the following disclaimer in the documentation

+ *    and/or other materials provided with the distribution.

+ *

+ * 3. The name of Atmel may not be used to endorse or promote products derived

+ *    from this software without specific prior written permission.

+ *

+ * 4. This software may only be redistributed and used in connection with an

+ *    Atmel microcontroller product.

+ *

+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED

+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR

+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ * \asf_license_stop

+ *

+ */

+/*

+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>

+ */

+#include <clock.h>

+

+#ifndef CONF_CLOCKS_H_INCLUDED

+#  define CONF_CLOCKS_H_INCLUDED

+

+/* System clock bus configuration */

+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false

+#  define CONF_CLOCK_FLASH_WAIT_STATES            0

+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1

+

+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */

+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1

+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true

+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false

+

+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */

+#  define CONF_CLOCK_XOSC_ENABLE                  false

+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL

+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL

+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768

+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true

+#  define CONF_CLOCK_XOSC_ON_DEMAND               true

+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false

+

+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */

+#  define CONF_CLOCK_XOSC32K_ENABLE               false

+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL

+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536

+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false

+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false

+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true

+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true

+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false

+

+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */

+#  define CONF_CLOCK_OSC32K_ENABLE                false

+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130

+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true

+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true

+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true

+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false

+

+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */

+#  define CONF_CLOCK_DFLL_ENABLE                  false

+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN

+#  define CONF_CLOCK_DFLL_ON_DEMAND               false

+

+/* DFLL open loop mode configuration */

+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)

+

+/* DFLL closed loop mode configuration */

+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1

+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6

+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true

+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true

+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true

+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true

+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)

+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)

+

+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */

+#  define CONF_CLOCK_DPLL_ENABLE                  false

+#  define CONF_CLOCK_DPLL_ON_DEMAND               true

+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false

+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false

+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false

+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false

+

+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT

+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K

+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT

+

+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768

+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1

+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000

+

+/* DPLL GCLK reference configuration */

+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1

+/* DPLL GCLK lock timer configuration */

+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1

+

+/* Set this to true to configure the GCLK when running clocks_init. If set to

+ * false, none of the GCLK generators will be configured in clocks_init(). */

+#  define CONF_CLOCK_CONFIGURE_GCLK               true

+

+/* Configure GCLK generator 0 (Main Clock) */

+#  define CONF_CLOCK_GCLK_0_ENABLE                true

+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_0_PRESCALER             1

+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 1 */

+#  define CONF_CLOCK_GCLK_1_ENABLE                false

+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_1_PRESCALER             1

+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 2 (RTC) */

+#  define CONF_CLOCK_GCLK_2_ENABLE                false

+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K

+#  define CONF_CLOCK_GCLK_2_PRESCALER             32

+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 3 */

+#  define CONF_CLOCK_GCLK_3_ENABLE                true

+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_3_PRESCALER             16

+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 4 */

+#  define CONF_CLOCK_GCLK_4_ENABLE                false

+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_4_PRESCALER             1

+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 5 */

+#  define CONF_CLOCK_GCLK_5_ENABLE                false

+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_5_PRESCALER             1

+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 6 */

+#  define CONF_CLOCK_GCLK_6_ENABLE                false

+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_6_PRESCALER             1

+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 7 */

+#  define CONF_CLOCK_GCLK_7_ENABLE                false

+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_7_PRESCALER             1

+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false

+

+/* Configure GCLK generator 8 */

+#  define CONF_CLOCK_GCLK_8_ENABLE                false

+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false

+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M

+#  define CONF_CLOCK_GCLK_8_PRESCALER             1

+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false

+

+#endif /* CONF_CLOCKS_H_INCLUDED */

diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..2d9b8813
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..028279c9
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM D21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..53bf1e4a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..80e8a480
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..84f937fc
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samd21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samd21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
+       sam0/utils/cmsis/samd21/source/system_samd21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/samd21_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samd21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samd21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samd21/include                    \
+       sam0/utils/cmsis/samd21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samd21/gcc/samd21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samd21_xplained_pro/debug_scripts/gcc/samd21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMD21_XPLAINED_PRO                       \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMD21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..80e8a480
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont.eww
new file mode 100644
index 00000000..011d8580
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont.eww
@@ -0,0 +1,9 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+	<project>
+		<path>$WS_DIR$\example_sysfont_sram.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..805e4868
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..93fc082b
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2677 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samd21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_sram.ewd b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_sram.ewd
new file mode 100644
index 00000000..a0a6925e
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_sram.ewd
@@ -0,0 +1,2339 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD21\samd21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samd21_xplained_pro/debug_scripts/iar/samd21_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMD21\ATSAMD21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CMSISDAP_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CMSISDAPInterfaceRadio</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_sram.ewp b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_sram.ewp
new file mode 100644
index 00000000..87b2d538
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samd21_xplained_pro/iar/example_sysfont_sram.ewp
@@ -0,0 +1,2677 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMD21J18A	Atmel ATSAMD21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMD21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAMD21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd21/iar/samd21j18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samd21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samd21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samd21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/iar/startup_samd21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/source/system_samd21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18au.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15bu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g15a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21e16l.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/pio/samd21j16b.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/tcc_lighting.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/component/sysctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15l.h</name>
+						</file>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc6.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc7.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/ac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/i2s.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/instance/dmac.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g18au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e15l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g17au.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16bu.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16l.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd21/include/samd21j15b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samd21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samd21_xplained_pro/samd21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..df421904
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..3edb111d
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..53bf1e4a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..2eaf96e1
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..e88c6de2
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/saml21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/saml21_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include                    \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML21J18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..2eaf96e1
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont.eww
new file mode 100644
index 00000000..011d8580
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont.eww
@@ -0,0 +1,9 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+	<project>
+		<path>$WS_DIR$\example_sysfont_sram.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..8c294687
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..e249d99d
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2569 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>saml21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_sram.ewd b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_sram.ewd
new file mode 100644
index 00000000..8dddb0ef
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_sram.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro/debug_scripts/iar/saml21_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_sram.ewp b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_sram.ewp
new file mode 100644
index 00000000..6ea18f8c
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro/iar/example_sysfont_sram.ewp
@@ -0,0 +1,2569 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18A	Atmel ATSAML21J18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18A__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>saml21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tcc_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/component/ac.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/rtc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/supc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/mclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc1_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc2_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/pac_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc1_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/rstc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/pm_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc3_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc0_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tcc2_200.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/eic_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/gclk_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/adc_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/nvmctrl_301.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc0_100.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/instance/tc4_100.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/pio/saml21e18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include/saml21j18a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_board.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..5bc0a39e
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..2f1fda00
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,201 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_spi.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..ad688e5d
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_ssd1306.h
new file mode 100644
index 00000000..3edb111d
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_sysfont.h
new file mode 100644
index 00000000..53bf1e4a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..2eaf96e1
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..fb1d5b0e
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml21j18b
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/saml21_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml21/clock.c     \
+       sam0/drivers/system/clock/clock_saml21/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml21/source/gcc/startup_saml21.c \
+       sam0/utils/cmsis/saml21/source/system_saml21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b \
+       sam0/boards                                        \
+       sam0/boards/saml21_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml21             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml21/include_b                  \
+       sam0/utils/cmsis/saml21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml21/gcc/saml21j18b_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml21_xplained_pro_b/debug_scripts/gcc/saml21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML21_XPLAINED_PRO                       \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML21J18B__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/asf.h b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..2eaf96e1
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML21

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML21

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont.eww
new file mode 100644
index 00000000..011d8580
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont.eww
@@ -0,0 +1,9 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+	<project>
+		<path>$WS_DIR$\example_sysfont_sram.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..0b552d05
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18b-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..6e63df73
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2611 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>saml21_xplained_pro_b</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include_b</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_sram.ewd b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_sram.ewd
new file mode 100644
index 00000000..b8e1a0d0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_sram.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML21\saml21j18b-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml21_xplained_pro_b/debug_scripts/iar/saml21_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML21\ATSAML21J18B.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_sram.ewp b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_sram.ewp
new file mode 100644
index 00000000..ad45cd56
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml21_xplained_pro_b/iar/example_sysfont_sram.ewp
@@ -0,0 +1,2611 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML21J18B	Atmel ATSAML21J18B</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>__SAML21J18B__</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+					<state>BOARD=SAML21_XPLAINED_PRO</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml21/iar/saml21j18b_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>saml21_xplained_pro_b</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>system</name>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml21/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml21_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml21_xplained_pro_b/saml21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml21</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/iar/startup_saml21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/source/system_saml21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include_b</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e17b.h</name>
+						</file>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/component/adc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/opamp.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/instance/osc32kctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g18b.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g17b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e15b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21g16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21e18b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j16b.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/pio/saml21j17b.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e15b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e18b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21e16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g16b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21g17b.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml21/include_b/saml21j17b.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_board.h
new file mode 100644
index 00000000..7ee3a3be
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..d48f41bc
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..da3286fe
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L22 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..69aaeacb
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..bd031eae
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..f87536cd
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/saml22_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/saml22_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO                       \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..bd031eae
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont.eww
new file mode 100644
index 00000000..011d8580
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont.eww
@@ -0,0 +1,9 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+	<project>
+		<path>$WS_DIR$\example_sysfont_sram.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..222fe2ce
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..1bc9cde3
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2596 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>saml22_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_sram.ewd b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_sram.ewd
new file mode 100644
index 00000000..6e490a18
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_sram.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro/debug_scripts/iar/saml22_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_sram.ewp b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_sram.ewp
new file mode 100644
index 00000000..24b646a8
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro/iar/example_sysfont_sram.ewp
@@ -0,0 +1,2596 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>BOARD=SAML22_XPLAINED_PRO</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>saml22_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro/saml22_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_board.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_board.h
new file mode 100644
index 00000000..6c22936a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Xplained Pro B board configuration.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_clocks.h
new file mode 100644
index 00000000..fb1141ee
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_clocks.h
@@ -0,0 +1,171 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 Clock configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DETECT    false
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_DIV       SYSTEM_CFD_DIV_128
+#  define CONF_CLOCK_XOSC_CLOCK_FAILURE_EVENT_OUT false
+
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DETECT false
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_DIV    SYSTEM_CFD_DIV_1
+#  define CONF_CLOCK_XOSC32K_CLOCK_FAILURE_EVENT_OUT false
+
+/* SYSTEM_CLOCK_SOURCE_OSCULP32K configuration - Internal Ultra Low Power 32KHz oscillator */
+#  define CONF_CLOCK_OSCULP32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSCULP32K_ENABLE_32KHZ_OUTPUT   true
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_spi.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_spi.h
new file mode 100644
index 00000000..106dfeab
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM L22 SPI configuration
+ *
+ * Copyright (C) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_ssd1306.h
new file mode 100644
index 00000000..9219b43e
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L22 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_sysfont.h
new file mode 100644
index 00000000..69aaeacb
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/asf.h
new file mode 100644
index 00000000..bd031eae
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/config.mk
new file mode 100644
index 00000000..2b99539e
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = saml22n18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/saml22_xplained_pro_b/board_init.c     \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_saml22/clock.c     \
+       sam0/drivers/system/clock/clock_saml22/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/saml22/source/gcc/startup_saml22.c \
+       sam0/utils/cmsis/saml22/source/system_saml22.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b \
+       sam0/boards                                        \
+       sam0/boards/saml22_xplained_pro_b                  \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_saml22             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_saml22 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/saml22/include                    \
+       sam0/utils/cmsis/saml22/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/saml22/gcc/saml22n18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/saml22_xplained_pro_b/debug_scripts/gcc/saml22_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAML22_XPLAINED_PRO_B                     \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAML22N18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/asf.h b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/asf.h
new file mode 100644
index 00000000..bd031eae
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAML22

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAML22

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont.eww
new file mode 100644
index 00000000..011d8580
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont.eww
@@ -0,0 +1,9 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+	<project>
+		<path>$WS_DIR$\example_sysfont_sram.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..5f2ec590
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..97ecdff1
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2596 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>saml22_xplained_pro_b</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_sram.ewd b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_sram.ewd
new file mode 100644
index 00000000..c2fba21c
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_sram.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAML22\saml22n18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/saml22_xplained_pro_b/debug_scripts/iar/saml22_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAML22\ATSAML22N18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_sram.ewp b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_sram.ewp
new file mode 100644
index 00000000..2967be9c
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/saml22_xplained_pro_b/iar/example_sysfont_sram.ewp
@@ -0,0 +1,2596 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAML22N18A	Atmel ATSAML22N18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>BOARD=SAML22_XPLAINED_PRO_B</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>__SAML22N18A__</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/saml22/iar/saml22n18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>saml22_xplained_pro_b</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_saml22/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_saml22</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_saml22/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>saml22</name>
+					<group>
+						<name>source</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.c</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/iar/startup_saml22.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/source/system_saml22.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22j18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/pio/saml22n16a.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/instance/sercom4.h</name>
+							</file>
+						</group>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/aes.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/freqm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/slcd.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/trng.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/component/dsu.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22j16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22n16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/saml22/include/saml22g16a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>saml22_xplained_pro_b</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/saml22_xplained_pro_b/saml22_xplained_pro_b.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_board.h
new file mode 100644
index 00000000..814b959e
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..d7bb7875
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_clocks.h
@@ -0,0 +1,198 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         6
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                true
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             16
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..b4187ac5
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R21 SPI configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..d58c8f4a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM R21 Xplained Pro
+#  define SSD1306_SPI                 EXT1_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT1_PIN_5
+#  define SSD1306_RES_PIN             EXT1_PIN_10
+#  define SSD1306_CS_PIN              EXT1_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT1_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT1_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT1_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT1_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..53bf1e4a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..80e8a480
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..00e19ac5
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr21g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samr21_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr21/source/gcc/startup_samr21.c \
+       sam0/utils/cmsis/samr21/source/system_samr21.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/samr21_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samr21_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samd21_r21_da_ha1  \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr21 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_d_r_h          \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_d_r_h          \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr21/include                    \
+       sam0/utils/cmsis/samr21/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr21/gcc/samr21g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr21_xplained_pro/debug_scripts/gcc/samr21_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR21_XPLAINED_PRO                       \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMR21G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..80e8a480
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMD21/R21/DA/HA

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont.eww
new file mode 100644
index 00000000..011d8580
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont.eww
@@ -0,0 +1,9 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+	<project>
+		<path>$WS_DIR$\example_sysfont_sram.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..8b8a4976
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR21\samr21g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..c3720e57
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2545 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samr21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/iar/startup_samr21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_sram.ewd b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_sram.ewd
new file mode 100644
index 00000000..d64f85b6
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_sram.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR21\samr21g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr21_xplained_pro/debug_scripts/iar/samr21_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR21\ATSAMR21G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>ARMSIM_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_sram.ewp b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_sram.ewp
new file mode 100644
index 00000000..0017fdac
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr21_xplained_pro/iar/example_sysfont_sram.ewp
@@ -0,0 +1,2545 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR21G18A	Atmel ATSAMR21G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>BOARD=SAMR21_XPLAINED_PRO</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>__SAMR21G18A__</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr21/iar/samr21g18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samr21_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr21</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr21/system_interrupt_features.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samd21_r21_da_ha1</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_feature.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd21_r21_da_ha1/clock_config_check.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_d_r_h</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr21_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr21_xplained_pro/samr21_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr21</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/iar/startup_samr21.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/source/system_samr21.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/hmatrixb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/component/tcc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sbmatrix.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/sysctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tc3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/pac1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/instance/rfctrl.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e18a.h</name>
+						</file>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e16a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e19a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g17a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21g18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/pio/samr21e17a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g17a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21e19a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21g16a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr21/include/samr21.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_board.h b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_board.h
new file mode 100644
index 00000000..29176c86
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_board.h
@@ -0,0 +1,50 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Xplained Pro board configuration.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+#endif /* CONF_BOARD_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_clocks.h b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_clocks.h
new file mode 100644
index 00000000..2fa7493a
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_clocks.h
@@ -0,0 +1,200 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 Clock configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            0
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_LOW_POWER_DIVIDER            SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_BACKUP_DIVIDER               SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC16M configuration - Internal 16MHz oscillator */
+#  define CONF_CLOCK_OSC16M_FREQ_SEL              SYSTEM_OSC16M_4M 
+#  define CONF_CLOCK_OSC16M_ON_DEMAND             true
+#  define CONF_CLOCK_OSC16M_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               false
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            true
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       false
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  false
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
+#  define CONF_CLOCK_DFLL_ON_DEMAND               false
+#  define CONF_CLOCK_DFLL_RUN_IN_STANDBY          false
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+#  define CONF_CLOCK_DPLL_PRESCALER               SYSTEM_CLOCK_SOURCE_DPLL_DIV_1
+
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                false
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 2  */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_2_PRESCALER             1
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                false
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC16M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+#endif /* CONF_CLOCKS_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_spi.h b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_spi.h
new file mode 100644
index 00000000..f44cac37
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_spi.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief SAM R30 SPI configuration
+ *
+ * Copyright (C) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#  define CONF_SPI_H_INCLUDED
+
+#  define CONF_SPI_MASTER_ENABLE     true
+#  define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
+
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_ssd1306.h b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_ssd1306.h
new file mode 100644
index 00000000..eee7454b
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_ssd1306.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief SSD1306 display controller driver configuration file.
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SSD1306_H_INCLUDED
+#define CONF_SSD1306_H_INCLUDED
+
+#include <board.h>
+
+// Interface configuration for SAM L21 Xplained Pro
+#  define SSD1306_SPI                 EXT3_SPI_MODULE
+#  define CONFIG_SSD1306_FRAMEBUFFER
+
+#  define SSD1306_DC_PIN              EXT3_PIN_5
+#  define SSD1306_RES_PIN             EXT3_PIN_10
+#  define SSD1306_CS_PIN              EXT3_PIN_15
+
+#  define SSD1306_SPI_PINMUX_SETTING  EXT3_SPI_SERCOM_MUX_SETTING
+#  define SSD1306_SPI_PINMUX_PAD0     EXT3_SPI_SERCOM_PINMUX_PAD0
+#  define SSD1306_SPI_PINMUX_PAD1     PINMUX_UNUSED
+#  define SSD1306_SPI_PINMUX_PAD2     EXT3_SPI_SERCOM_PINMUX_PAD2
+#  define SSD1306_SPI_PINMUX_PAD3     EXT3_SPI_SERCOM_PINMUX_PAD3
+
+// Minimum clock period is 50ns@3.3V -> max frequency is 20MHz
+#define SSD1306_CLOCK_SPEED           1000000UL
+#define SSD1306_DISPLAY_CONTRAST_MAX  40
+#define SSD1306_DISPLAY_CONTRAST_MIN  30
+
+#endif /* CONF_SSD1306_H_INCLUDED */
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_sysfont.h b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_sysfont.h
new file mode 100644
index 00000000..72b27a50
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/Makefile b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..d2c78be0
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/asf.h b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..24b9cfef
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/config.mk b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..b87eb302
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc/config.mk
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0plus
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samr30g18a
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = example_sysfont_flash.elf
+TARGET_SRAM = example_sysfont_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/display/ssd1306/ssd1306.c       \
+       common2/services/delay/sam0/systick_counter.c      \
+       common2/services/gfx_mono/example_sysfont/example_sysfont.c \
+       common2/services/gfx_mono/gfx_mono_framebuffer.c   \
+       common2/services/gfx_mono/gfx_mono_generic.c       \
+       common2/services/gfx_mono/gfx_mono_text.c          \
+       common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c \
+       common2/services/gfx_mono/sysfont.c                \
+       sam0/boards/samr30_xplained_pro/board_init.c       \
+       sam0/drivers/port/port.c                           \
+       sam0/drivers/sercom/sercom.c                       \
+       sam0/drivers/sercom/sercom_interrupt.c             \
+       sam0/drivers/sercom/spi/spi.c                      \
+       sam0/drivers/sercom/spi/spi_interrupt.c            \
+       sam0/drivers/system/clock/clock_samr30/clock.c     \
+       sam0/drivers/system/clock/clock_samr30/gclk.c      \
+       sam0/drivers/system/interrupt/system_interrupt.c   \
+       sam0/drivers/system/pinmux/pinmux.c                \
+       sam0/drivers/system/system.c                       \
+       sam0/utils/cmsis/samr30/source/gcc/startup_samr30.c \
+       sam0/utils/cmsis/samr30/source/system_samr30.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/display/ssd1306                 \
+       common2/services/delay                             \
+       common2/services/delay/sam0                        \
+       common2/services/gfx_mono                          \
+       common2/services/gfx_mono/example_sysfont          \
+       common2/services/gfx_mono/example_sysfont/samr30_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samr30_xplained_pro                    \
+       sam0/drivers/port                                  \
+       sam0/drivers/sercom                                \
+       sam0/drivers/sercom/spi                            \
+       sam0/drivers/system                                \
+       sam0/drivers/system/clock                          \
+       sam0/drivers/system/clock/clock_samr30             \
+       sam0/drivers/system/interrupt                      \
+       sam0/drivers/system/interrupt/system_interrupt_samr30 \
+       sam0/drivers/system/pinmux                         \
+       sam0/drivers/system/power                          \
+       sam0/drivers/system/power/power_sam_l              \
+       sam0/drivers/system/reset                          \
+       sam0/drivers/system/reset/reset_sam_l              \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samr30/include                    \
+       sam0/utils/cmsis/samr30/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_flash.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samr30/gcc/samr30g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_flash.gdb
+DEBUG_SCRIPT_SRAM  = sam0/boards/samr30_xplained_pro/debug_scripts/gcc/samr30_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMR30_XPLAINED_PRO                       \
+       -D GFX_MONO_LCD_HEIGHT=64                          \
+       -D GFX_MONO_UG_2832HSWEG04=1                       \
+       -D SPI_CALLBACK_MODE=true                          \
+       -D SYSTICK_MODE                                    \
+       -D __SAMR30G18A__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/asf.h b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/asf.h
new file mode 100644
index 00000000..24b9cfef
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/asf.h
@@ -0,0 +1,110 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: Delay routines

+#include <delay.h>

+

+// From module: GFX Monochrome - Monochrome Graphic Library

+#include <gfx_mono.h>

+

+// From module: GFX Monochrome - System Font

+#include <sysfont.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: PORT - GPIO Pin Control

+#include <port.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SERCOM Callback API

+#include <sercom.h>

+#include <sercom_interrupt.h>

+

+// From module: SERCOM SPI - Serial Peripheral Interface (Callback APIs)

+#include <spi.h>

+#include <spi_interrupt.h>

+

+// From module: SSD1306 OLED controller

+#include <ssd1306.h>

+

+// From module: SYSTEM - Clock Management for SAMR30

+#include <clock.h>

+#include <gclk.h>

+

+// From module: SYSTEM - Core System Driver

+#include <system.h>

+

+// From module: SYSTEM - I/O Pin Multiplexer

+#include <pinmux.h>

+

+// From module: SYSTEM - Interrupt Driver For SAMR30

+#include <system_interrupt.h>

+

+// From module: SYSTEM - Power Management for SAM L21

+#include <power.h>

+

+// From module: SYSTEM - Reset Management for SAM L21

+#include <reset.h>

+
+#endif // ASF_H
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont.eww b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont.eww
new file mode 100644
index 00000000..011d8580
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont.eww
@@ -0,0 +1,9 @@
+<workspace>
+	<batchBuild></batchBuild>
+	<project>
+		<path>$WS_DIR$\example_sysfont_flash.ewp</path>
+	</project>
+	<project>
+		<path>$WS_DIR$\example_sysfont_sram.ewp</path>
+	</project>
+</workspace>
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_flash.ewd b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_flash.ewd
new file mode 100644
index 00000000..5527dd8f
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_flash.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR30\samr30g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_flash.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_flash.ewp b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_flash.ewp
new file mode 100644
index 00000000..4b2cb819
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_flash.ewp
@@ -0,0 +1,2539 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_flash.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_flash.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_flash.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samr30_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr30</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/iar/startup_samr30.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr30_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_sram.ewd b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_sram.ewd
new file mode 100644
index 00000000..160dc101
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_sram.ewd
@@ -0,0 +1,2313 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMR30\samr30g18a-flash.board</state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>C-SPY</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>23</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCVariant</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacFile</name>
+					<state>$PROJ_DIR$\../../../../../../sam0/boards/samr30_xplained_pro/debug_scripts/iar/samr30_xplained_pro_sram.mac</state>
+				</option>
+				<option>
+					<name>MemOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MemFile</name>
+					<state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\SAMR30\ATSAMR30G18A.ddf</state>
+				</option>
+				<option>
+					<name>RunToEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RunToName</name>
+					<state>main</state>
+				</option>
+				<option>
+					<name>CExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCDDFArgumentProducer</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadSuppressDownload</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDownloadVerifyAll</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCProductVersion</name>
+					<state>6.40.4.54214</state>
+				</option>
+				<option>
+					<name>OCDynDriverList</name>
+					<state>CMSISDAP_ID</state>
+				</option>
+				<option>
+					<name>OCLastSavedByProductVersion</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCDownloadAttachToProgram</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>UseFlashLoader</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CLowLevel</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacFile2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CDevice</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>FlashLoadersV3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesSuppressCheck3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesPath3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OverrideDefFlashBoard</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesOffset1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesOffset3</name>
+					<state></state>
+				</option>
+				<option>
+					<name>OCImagesUse1</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCImagesUse3</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDeviceConfigMacroFile</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ARMSIM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCSimDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCSimEnablePSP</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspOverrideConfig</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCSimPspConfigFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ANGEL_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCAngelHeartbeat</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommunication</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CAngelCommBaud</name>
+					<version>0</version>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CAngelCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ANGELTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoAngelLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AngelLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>GDBSERVER_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARROM_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRomLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CRomCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRomCommBaud</name>
+					<version>0</version>
+					<state>7</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IJET_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCIarProbeConfigFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetResetList</name>
+					<version>0</version>
+					<state>33</state>
+				</option>
+				<option>
+					<name>IjetHWResetDuration</name>
+					<state>300</state>
+				</option>
+				<option>
+					<name>IjetHWResetDelay</name>
+					<state>200</state>
+				</option>
+				<option>
+					<name>IjetPowerFromProbe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IjetPowerRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>IjetInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTargetEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetJtagSpeedList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetProtocolRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetSwoPin</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>IjetSwoPrescalerList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetRestoreBreakpointsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IjetUpdateBreakpointsEdit</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>RDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>RDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchCHKERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CatchDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>JLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>14</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>JLinkSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCJLinkDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCJLinkHWResetDelay</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JLinkInitialSpeed</name>
+					<state>32</state>
+				</option>
+				<option>
+					<name>CCDoJlinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCScanChainNonARMDevices</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkIRLength</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkCommRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>CCJLinkSpeedRadioV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCUSBDevice</name>
+					<version>1</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkResetList</name>
+					<version>6</version>
+					<state>5</state>
+				</option>
+				<option>
+					<name>CCJLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCORERESET</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchMMERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchNOCPERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchCHRERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchSTATERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchBUSERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchINTERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchHARDERR</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCatchDummy</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkScriptFile</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCJLinkUsbSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCTcpIpAlt</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJLinkTcpIpSerialNo</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCJLinkTraceSourceDummy</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>LMIFTDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>LmiftdiSpeed</name>
+					<state>500</state>
+				</option>
+				<option>
+					<name>CCLmiftdiDoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiftdiLogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCLmiFtdiInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>MACRAIGOR_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>3</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>jtag</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuSpeed</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TCPIP</name>
+					<state>aaa.bbb.ccc.ddd</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>DoEmuMultiTarget</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>EmuMultiTarget</name>
+					<state>0@ARM7TDMI</state>
+				</option>
+				<option>
+					<name>EmuHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CEmuCommBaud</name>
+					<version>0</version>
+					<state>4</state>
+				</option>
+				<option>
+					<name>CEmuCommPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>jtago</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>UnusedAddr</name>
+					<state>0x00800000</state>
+				</option>
+				<option>
+					<name>CCMacraigorHWResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCJTagBreakpointRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagDoUpdateBreakpoints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJTagUpdateBreakpoints</name>
+					<state>_call_main</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMacraigorInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>PEMICRO_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCPEMicroAttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroInterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroResetDelay</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCPEMicroJtagSpeed</name>
+					<state>#UNINITIALIZED#</state>
+				</option>
+				<option>
+					<name>CCJPEMicroShowSettings</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>DoLogfile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>LogFile</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCPEMicroUSBDevice</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPEMicroSerialPort</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCJPEMicroTCPIPAutoScanNetwork</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCPEMicroTCPIP</name>
+					<state>10.0.0.1</state>
+				</option>
+				<option>
+					<name>CCPEMicroCommCmdLineProducer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDI_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDIDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>RDIJTAGJET_ID</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CRDILogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CRDILogFileEdit</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>CCRDIHWReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchReset</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchUndef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchSWI</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchData</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchPrefetch</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchIRQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCRDICatchFIQ</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>JTAGjetConfigure</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>STLINK_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>2</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceRadio</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkInterfaceCmdLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSTLinkResetList</name>
+					<version>1</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCpuClockEdit</name>
+					<state>72.0</state>
+				</option>
+				<option>
+					<name>CCSwoClockAuto</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSwoClockEdit</name>
+					<state>2000</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>THIRDPARTY_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CThirdPartyDriverDll</name>
+					<state>###Uninitialized###</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CThirdPartyLogFileEditB</name>
+					<state>$PROJ_DIR$\cspycomm.log</state>
+				</option>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>XDS100_ID</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OCDriverInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OCXDS100AttachSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>TIPackageOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>TIPackage</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCXds100InterfaceList</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>BoardFile</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<debuggerPlugins>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+				<loadFlag>0</loadFlag>
+			</plugin>
+			<plugin>
+				<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+				<loadFlag>1</loadFlag>
+			</plugin>
+		</debuggerPlugins>
+	</configuration>
+</project>
diff --git a/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_sram.ewp b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_sram.ewp
new file mode 100644
index 00000000..6aab1144
--- /dev/null
+++ b/common2/services/gfx_mono/example_sysfont/samr30_xplained_pro/iar/example_sysfont_sram.ewp
@@ -0,0 +1,2539 @@
+<project>
+	<fileVersion>2</fileVersion>
+	<configuration>
+		<name>Debug</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>1</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Debug\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Debug\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Debug\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.40.1.53794</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>35</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>2</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>1</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state>__iar_program_start</state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>1</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<configuration>
+		<name>Release</name>
+		<toolchain>
+			<name>ARM</name>
+		</toolchain>
+		<debug>0</debug>
+		<settings>
+			<name>General</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<version>21</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>ExePath</name>
+					<state>Release\Exe</state>
+				</option>
+				<option>
+					<name>ObjPath</name>
+					<state>Release\Obj</state>
+				</option>
+				<option>
+					<name>ListPath</name>
+					<state>Release\List</state>
+				</option>
+				<option>
+					<name>Variant</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianMode</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>Input variant</name>
+					<version>3</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Input description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>Output variant</name>
+					<version>2</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Output description</name>
+					<state>Full formatting.</state>
+				</option>
+				<option>
+					<name>GOutputBinary</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FPU</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGCoreOrChip</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelect</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>GRuntimeLibSelectSlave</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>RTDescription</name>
+					<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+				</option>
+				<option>
+					<name>OGProductVersion</name>
+					<state>5.10.0.159</state>
+				</option>
+				<option>
+					<name>OGLastSavedByProductVersion</name>
+					<state>6.30.1.53141</state>
+				</option>
+				<option>
+					<name>GeneralEnableMisra</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraVerbose</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGChipSelectEditMenu</name>
+					<state>ATSAMR30G18A	Atmel ATSAMR30G18A</state>
+				</option>
+				<option>
+					<name>GenLowLevelInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GEndianModeBE</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGBufferedTerminalOutput</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GenStdoutInterface</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>GeneralMisraVer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GeneralMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>RTConfigPath2</name>
+					<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+				</option>
+				<option>
+					<name>GFPUCoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>GBECoreSlave</name>
+					<version>20</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OGUseCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OGUseCmsisDspLib</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>ICCARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>28</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>CCOptimizationNoSizeConstraints</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>CCPreprocFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocComments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPreprocLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMnemonics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListCMessages</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCListAssSource</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagSuppress</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagRemark</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagWarning</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCDiagError</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCAllowList</name>
+					<version>0</version>
+					<state>1111111</state>
+				</option>
+				<option>
+					<name>CCDebugInfo</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IEndianMode</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IExtraOptionsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IExtraOptions</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CCLangConformance</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCSignedPlainChar</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCRequirePrototypes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCDiagWarnAreErr</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCompilerRuntimeInfo</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>CCLibConfigHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>PreInclude</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CompilerMisraOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCIncludePath2</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>CCStdIncCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCCodeSection</name>
+					<state>.text</state>
+				</option>
+				<option>
+					<name>IInterwork2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IProcessorMode2</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevel</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CCOptStrategy</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CCOptLevelSlave</name>
+					<state>3</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules98</name>
+					<version>0</version>
+					<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+				</option>
+				<option>
+					<name>CompilerMisraRules04</name>
+					<version>0</version>
+					<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+				</option>
+				<option>
+					<name>CCPosIndRopi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndRwpi</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CCPosIndNoDynInit</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccLang</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccAllowVLA</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCppDialect</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccExceptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccRTTI</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccStaticDestr</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccCppInlineSemantics</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IccCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IccFloatSemantics</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>AARM</name>
+			<archiveVersion>2</archiveVersion>
+			<data>
+				<version>8</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>AObjPrefix</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AEndian</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>ACaseSensitivity</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacroChars</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnWhat</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AWarnOne</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange1</name>
+					<state></state>
+				</option>
+				<option>
+					<name>AWarnRange2</name>
+					<state></state>
+				</option>
+				<option>
+					<name>ADebug</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AltRegisterNames</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ADefines</name>
+					<state>__SAMR30G18A__</state>
+					<state>SYSTICK_MODE</state>
+					<state>GFX_MONO_UG_2832HSWEG04=1</state>
+					<state>GFX_MONO_LCD_HEIGHT=64</state>
+					<state>ARM_MATH_CM0PLUS=true</state>
+					<state>BOARD=SAMR30_XPLAINED_PRO</state>
+					<state>SPI_CALLBACK_MODE=true</state>
+				</option>
+				<option>
+					<name>AList</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AListHeader</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AListing</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>Includes</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacDefs</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MacExps</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>MacExec</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OnlyAssed</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>MultiLine</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLengthCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>PageLength</name>
+					<state>80</state>
+				</option>
+				<option>
+					<name>TabSpacing</name>
+					<state>8</state>
+				</option>
+				<option>
+					<name>AXRef</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDefines</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefInternal</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AXRefDual</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AFpuProcessor</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>AOutputFile</name>
+					<state>$FILE_BNAME$.o</state>
+				</option>
+				<option>
+					<name>AMultibyteSupport</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsCheck</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>ALimitErrorsEdit</name>
+					<state>100</state>
+				</option>
+				<option>
+					<name>AIgnoreStdInclude</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AUserIncludes</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source</state>
+					<state>$PROJ_DIR$/../../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state>
+					<state>$PROJ_DIR$/../../../../delay</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/sercom</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards</state>
+					<state>$PROJ_DIR$/../../../../../components/display/ssd1306</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state>
+					<state>$PROJ_DIR$/../../../../../../common/utils</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l</state>
+					<state>$PROJ_DIR$/..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30</state>
+					<state>$PROJ_DIR$/../..</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include</state>
+					<state>$PROJ_DIR$/../../../../delay/sam0</state>
+					<state>$PROJ_DIR$/../../../../../../common/boards</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state>
+					<state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state>
+					<state>$PROJ_DIR$/.</state>
+				</option>
+				<option>
+					<name>AExtraOptionsCheckV2</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>AExtraOptionsV2</name>
+					<state></state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>OBJCOPY</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>1</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>OOCOutputFormat</name>
+					<version>2</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OCOutputOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>OOCOutputFile</name>
+					<state>example_sysfont_sram.bin</state>
+				</option>
+				<option>
+					<name>OOCCommandLineProducer</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>OOCObjCopyEnable</name>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>CUSTOM</name>
+			<archiveVersion>3</archiveVersion>
+			<data>
+				<extensions></extensions>
+				<cmdline></cmdline>
+			</data>
+		</settings>
+		<settings>
+			<name>BICOMP</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+		<settings>
+			<name>BUILDACTION</name>
+			<archiveVersion>1</archiveVersion>
+			<data>
+				<prebuild></prebuild>
+				<postbuild></postbuild>
+			</data>
+		</settings>
+		<settings>
+			<name>ILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>15</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IlinkOutputFile</name>
+					<state>example_sysfont_sram.out</state>
+				</option>
+				<option>
+					<name>IlinkLibIOConfig</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>XLinkMisraHandler</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkInputFileSlave</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkDebugInfoEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkKeepSymbols</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySymbol</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinarySegment</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkRawBinaryAlign</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkConfigDefines</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkMapFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogFile</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogInitialization</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogModule</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogSection</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogVeneer</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIcfFile</name>
+					<state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samr30/iar/samr30g18a_sram.icf</state>
+				</option>
+				<option>
+					<name>IlinkIcfFileSlave</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkEnableRemarks</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkSuppressDiags</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsRem</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsWarn</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkTreatAsErr</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkWarningsAreErrors</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkUseExtraOptions</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkExtraOptions</name>
+				</option>
+				<option>
+					<name>IlinkLowLevelInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAutoLibEnable</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkAdditionalLibs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkOverrideProgramEntryLabel</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabelSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkProgramEntryLabel</name>
+					<state></state>
+				</option>
+				<option>
+					<name>DoFill</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>FillerByte</name>
+					<state>0xFF</state>
+				</option>
+				<option>
+					<name>FillerStart</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>FillerEnd</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>CrcSize</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcAlign</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcPoly</name>
+					<state>0x11021</state>
+				</option>
+				<option>
+					<name>CrcCompl</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcBitOrder</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+				<option>
+					<name>CrcInitialValue</name>
+					<state>0x0</state>
+				</option>
+				<option>
+					<name>DoCrc</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkBE8Slave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkBufferedTerminalOutput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkStdoutInterfaceSlave</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcFullSize</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkIElfToolPostProcess</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogAutoLibSelect</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogRedirSymbols</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkLogUnusedFragments</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcReverseByteOrder</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCrcUseAsInput</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptInline</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsAllow</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptExceptionsForce</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkCmsis</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptMergeDuplSections</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkOptUseVfe</name>
+					<state>1</state>
+				</option>
+				<option>
+					<name>IlinkOptForceVfe</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackAnalysisEnable</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IlinkStackControlFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IlinkStackCallGraphFile</name>
+					<state></state>
+				</option>
+				<option>
+					<name>CrcAlgorithm</name>
+					<version>0</version>
+					<state>1</state>
+				</option>
+				<option>
+					<name>CrcUnitSize</name>
+					<version>0</version>
+					<state>0</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>IARCHIVE</name>
+			<archiveVersion>0</archiveVersion>
+			<data>
+				<version>0</version>
+				<wantNonLocal>1</wantNonLocal>
+				<debug>0</debug>
+				<option>
+					<name>IarchiveInputs</name>
+					<state></state>
+				</option>
+				<option>
+					<name>IarchiveOverride</name>
+					<state>0</state>
+				</option>
+				<option>
+					<name>IarchiveOutput</name>
+					<state>###Unitialized###</state>
+				</option>
+			</data>
+		</settings>
+		<settings>
+			<name>BILINK</name>
+			<archiveVersion>0</archiveVersion>
+			<data></data>
+		</settings>
+	</configuration>
+	<group>
+		<name>common2</name>
+		<group>
+			<name>components</name>
+			<group>
+				<name>display</name>
+				<group>
+					<name>ssd1306</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../components/display/ssd1306/ssd1306.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+		<group>
+			<name>services</name>
+			<group>
+				<name>gfx_mono</name>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.c</name>
+				</file>
+				<group>
+					<name>example_sysfont</name>
+					<file>
+						<name>$PROJ_DIR$/../../example_sysfont.c</name>
+					</file>
+					<group>
+						<name>samr30_xplained_pro</name>
+						<file>
+							<name>$PROJ_DIR$/../conf_board.h</name>
+						</file>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/asf.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../conf_ssd1306.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_spi.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_clocks.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../conf_sysfont.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_text.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../sysfont.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_generic.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_framebuffer.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../gfx_mono_ug_2832hsweg04.h</name>
+				</file>
+			</group>
+			<group>
+				<name>delay</name>
+				<group>
+					<name>sam0</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../delay/sam0/systick_counter.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../delay/delay.h</name>
+				</file>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>sam0</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>cmsis</name>
+				<group>
+					<name>samr30</name>
+					<group>
+						<name>source</name>
+						<group>
+							<name>iar</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/iar/startup_samr30.c</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/source/system_samr30.h</name>
+						</file>
+					</group>
+					<group>
+						<name>include</name>
+						<group>
+							<name>component</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tcc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/sercom.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/supc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/component/nvmctrl.h</name>
+							</file>
+						</group>
+						<group>
+							<name>instance</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/dsu.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/nvmctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rstc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom4.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rtc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/mtb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/mclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/ccl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/port.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tal.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/dmac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/gclk.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/eic.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom3.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/pm.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/ac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc0.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom2.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/adc.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/usb.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/tcc1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/osc32kctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom1.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/rfctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/wdt.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/evsys.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/oscctrl.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/pac.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/sercom5.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/instance/supc.h</name>
+							</file>
+						</group>
+						<group>
+							<name>pio</name>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30e18a.h</name>
+							</file>
+							<file>
+								<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/pio/samr30g18a.h</name>
+							</file>
+						</group>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30e18a.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samr30/include/samr30g18a.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>preprocessor</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name>
+			</file>
+			<group>
+				<name>header_files</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<group>
+				<name>samr30_xplained_pro</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro/board_init.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/boards/samr30_xplained_pro/samr30_xplained_pro.h</name>
+				</file>
+			</group>
+		</group>
+		<group>
+			<name>drivers</name>
+			<group>
+				<name>sercom</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.c</name>
+				</file>
+				<group>
+					<name>spi</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.c</name>
+					</file>
+					<group>
+						<name>quick_start_slave</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave/qs_spi_slave_basic.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_dma</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_dma/qs_spi_dma_use.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi_interrupt.h</name>
+					</file>
+					<group>
+						<name>quick_start_slave_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_slave_callback/qs_spi_slave_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master_callback</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master_callback/qs_spi_master_callback.h</name>
+						</file>
+					</group>
+					<group>
+						<name>quick_start_master</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/quick_start_master/qs_spi_master_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/spi/spi.h</name>
+					</file>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_pinout.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom.h</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/sercom/sercom_interrupt.h</name>
+				</file>
+			</group>
+			<group>
+				<name>system</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name>
+				</file>
+				<group>
+					<name>pinmux</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name>
+					</file>
+					<group>
+						<name>quick_start</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name>
+					</file>
+				</group>
+				<group>
+					<name>clock</name>
+					<group>
+						<name>clock_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/gclk.c</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock_config_check.h</name>
+						</file>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samr30/clock_feature.h</name>
+						</file>
+					</group>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name>
+					</file>
+				</group>
+				<group>
+					<name>interrupt</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name>
+					</file>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name>
+					</file>
+					<group>
+						<name>system_interrupt_samr30</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samr30/system_interrupt_features.h</name>
+						</file>
+					</group>
+				</group>
+				<group>
+					<name>power</name>
+					<group>
+						<name>power_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_l/power.h</name>
+						</file>
+					</group>
+				</group>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name>
+				</file>
+				<group>
+					<name>reset</name>
+					<group>
+						<name>reset_sam_l</name>
+						<file>
+							<name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_l/reset.h</name>
+						</file>
+					</group>
+				</group>
+			</group>
+			<group>
+				<name>port</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name>
+				</file>
+				<group>
+					<name>quick_start</name>
+					<file>
+						<name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name>
+					</file>
+				</group>
+			</group>
+		</group>
+	</group>
+	<group>
+		<name>common</name>
+		<group>
+			<name>utils</name>
+			<group>
+				<name>interrupt</name>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name>
+				</file>
+				<file>
+					<name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name>
+				</file>
+			</group>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name>
+			</file>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name>
+			</file>
+		</group>
+		<group>
+			<name>boards</name>
+			<file>
+				<name>$PROJ_DIR$/../../../../../../common/boards/board.h</name>
+			</file>
+		</group>
+	</group>
+</project>
diff --git a/common2/services/gfx_mono/gfx_mono.h b/common2/services/gfx_mono/gfx_mono.h
new file mode 100644
index 00000000..6b04da6e
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono.h
@@ -0,0 +1,330 @@
+/**
+ * \file
+ *
+ * \brief Monochrome graphic library API header file
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef GFX_MONO_H
+#define GFX_MONO_H
+
+#include <stdint.h>
+
+#include "compiler.h"
+
+#ifndef PROGMEM_DECLARE
+#  define PROGMEM_DECLARE(type, name) const type name
+#  define PROGMEM_T const
+#  define PROGMEM_PTR_T const *
+#  define PROGMEM_READ_BYTE(x) *(x)
+#  define PROGMEM_STRING_T const char*
+#endif
+
+/**
+ * \defgroup asfdoc_common2_gfx_mono Monochrome graphical display system
+ *
+ * See \ref asfdoc_common2_gfx_mono_quickstart.
+ *
+ * This library provides an interface to drawing graphics on monochrome
+ * graphical displays
+ *
+ * The graphics drivers consists of the following:
+ * - Display driver interface (gfx_mono.h)
+ * - General graphics drawing primitives (gfx_mono_generic.h)
+ * - Display specific implementation (ex. gfx_mono_ug_2832hsweg04.h)
+ *
+ * The generic drawing primitives is a library of functions for drawing
+ * graphics primitives such as lines, rectangles and circles. It uses other
+ * functions implemented by the display driver for drawing the primitives. The
+ * implementation of these functions can optionally be used by a display
+ * driver, but if the hardware of the display allows faster handling of any of
+ * the primitives, the display driver can implement it directly.
+ *
+ * The display specific drivers provides an interface to the graphical display.
+ * It implements the low level communication with the display hardware, putting
+ * pixels on the display and drawing primitives such as lines, circles and
+ * rectangles. Depending on the display driver implementation, drawing the
+ * graphics primitives might be handled by the generic graphics drawing
+ * primitives rather than the display driver itself.
+ *
+ * \section asfdoc_common2_gfx_mono_examples Examples
+ * The following examples are available for the driver:
+ * - \ref asfdoc_common2_gfx_mono_quickstart
+ * - \ref asfdoc_common2_gfx_mono_sysfont_example
+ * - \ref asfdoc_common2_gfx_mono_spinner_example
+ *
+ * \section asfdoc_common2_gfx_mono_api_overview API Overview
+ *
+ * \note The functions in the library are not interrupt safe.
+ * @{
+ */
+
+typedef uint8_t gfx_mono_color_t;
+typedef uint8_t gfx_coord_t;
+
+/** Pixel operations */
+enum gfx_mono_color {
+	/** Pixel is cleared */
+	GFX_PIXEL_CLR = 0,
+	/** Pixel is set on screen (OR) */
+	GFX_PIXEL_SET = 1,
+	/** Pixel is XORed */
+	GFX_PIXEL_XOR = 2,
+};
+
+/** Bitmap types */
+enum gfx_mono_bitmap_type {
+	/** Bitmap stored in SRAM */
+	GFX_MONO_BITMAP_RAM,
+	/** Bitmap stored in progmem */
+	GFX_MONO_BITMAP_PROGMEM
+};
+
+/* Cannot be moved to top, as they use the bitmap and color enums. */
+#ifdef USE_SDL
+# include "gfx_mono_sdl.h"
+#elif defined(GFX_MONO_C12832_A1Z)
+# include "gfx_mono_c12832_a1z.h"
+#elif defined(GFX_MONO_UG_2832HSWEG04)
+# include "gfx_mono_ug_2832hsweg04.h"
+#else
+/* NULL driver by default */
+# include "gfx_mono_null.h"
+#endif
+#include "gfx_mono_generic.h"
+
+/** \name Circle Sector Definitions */
+/** @{ */
+
+/** Bitmask for drawing circle octant 0. */
+#define GFX_OCTANT0     (1 << 0)
+/** Bitmask for drawing circle octant 1. */
+#define GFX_OCTANT1     (1 << 1)
+/** Bitmask for drawing circle octant 2. */
+#define GFX_OCTANT2     (1 << 2)
+/** Bitmask for drawing circle octant 3. */
+#define GFX_OCTANT3     (1 << 3)
+/** Bitmask for drawing circle octant 4. */
+#define GFX_OCTANT4     (1 << 4)
+/** Bitmask for drawing circle octant 5. */
+#define GFX_OCTANT5     (1 << 5)
+/** Bitmask for drawing circle octant 6. */
+#define GFX_OCTANT6     (1 << 6)
+/** Bitmask for drawing circle octant 7. */
+#define GFX_OCTANT7     (1 << 7)
+
+/** Bitmask for drawing circle quadrant 0. */
+#define GFX_QUADRANT0   (GFX_OCTANT0 | GFX_OCTANT1)
+/** Bitmask for drawing circle quadrant 1. */
+#define GFX_QUADRANT1   (GFX_OCTANT2 | GFX_OCTANT3)
+/** Bitmask for drawing circle quadrant 2. */
+#define GFX_QUADRANT2   (GFX_OCTANT4 | GFX_OCTANT5)
+/** Bitmask for drawing circle quadrant 3. */
+#define GFX_QUADRANT3   (GFX_OCTANT6 | GFX_OCTANT7)
+
+/** Bitmask for drawing left half of circle. */
+#define GFX_LEFTHALF    (GFX_QUADRANT3 | GFX_QUADRANT0)
+/** Bitmask for drawing top half of circle. */
+#define GFX_TOPHALF     (GFX_QUADRANT0 | GFX_QUADRANT1)
+/** Bitmask for drawing right half of circle. */
+#define GFX_RIGHTHALF   (GFX_QUADRANT1 | GFX_QUADRANT2)
+/** Bitmask for drawing bottom half of circle. */
+#define GFX_BOTTOMHALF  (GFX_QUADRANT2 | GFX_QUADRANT3)
+
+/** Bitmask for drawing whole circle. */
+#define GFX_WHOLE       0xFF
+
+/** @} */
+
+/** \name Graphic Drawing Primitives */
+/** @{ */
+
+/**
+ * \def gfx_mono_draw_horizontal_line(x, y, length, color)
+ * \brief Draw a horizontal line, one pixel wide.
+ *
+ * \param[in]  x          X coordinate of leftmost pixel.
+ * \param[in]  y          Y coordinate of the line.
+ * \param[in]  length     Length of the line in pixels.
+ * \param[in]  color      Pixel operation of the line.
+ */
+
+/**
+ * \def gfx_mono_draw_vertical_line(x, y, length, color)
+ * \brief Draw a vertical line, one pixel wide.
+ *
+ * \param[in]  x          X coordinate of the line.
+ * \param[in]  y          Y coordinate of the topmost pixel.
+ * \param[in]  length     Length of the line in pixels.
+ * \param[in]  color      Pixel operation of the line.
+ */
+
+/**
+ * \def gfx_mono_draw_line(x1, y1, x2, y2, color)
+ * \brief Draw a line between two arbitrary points.
+ *
+ * \param[in]  x1          Start X coordinate.
+ * \param[in]  y1          Start Y coordinate.
+ * \param[in]  x2          End X coordinate.
+ * \param[in]  y2          End Y coordinate.
+ * \param[in]  color       Pixel operation of the line.
+ */
+
+/**
+ * \def gfx_mono_draw_rect(x, y, width, height, color)
+ * \brief Draw an outline of a rectangle.
+ *
+ * \param[in]  x           X coordinate of the left side.
+ * \param[in]  y           Y coordinate of the top side.
+ * \param[in]  width       Width of the rectangle.
+ * \param[in]  height      Height of the rectangle.
+ * \param[in]  color       Pixel operation of the line.
+ */
+
+/**
+ * \def gfx_mono_draw_filled_rect(x, y, width, height, color)
+ * \brief Draw a filled rectangle.
+ *
+ * \param[in]  x           X coordinate of the left side.
+ * \param[in]  y           Y coordinate of the top side.
+ * \param[in]  width       Width of the rectangle.
+ * \param[in]  height      Height of the rectangle.
+ * \param[in]  color       Pixel operation of the line
+ */
+
+/**
+ * \def gfx_mono_draw_circle(x, y, radius, color, octant_mask)
+ * \brief Draw an outline of a circle or arc.
+ *
+ * The radius is the distance from the center to the circumference,
+ * which means that the total width or height of a circle will be
+ * (radius*2+1).
+ *
+ * The octant_mask parameter is a bitmask that decides which octants of
+ * the circle to draw. Use the GFX_OCTANTn, GFX_QUADRANTn, GFX_xHALF and
+ * GFX_WHOLE constants and OR them together if required. Radius equal to
+ * zero gives a single pixel.
+ *
+ * \param[in]  x           X coordinate of center.
+ * \param[in]  y           Y coordinate of center.
+ * \param[in]  radius      Circle radius in pixels.
+ * \param[in]  color       Pixel operation.
+ * \param[in]  octant_mask Bitmask indicating which octants to draw.
+ */
+
+/**
+ * \def gfx_mono_draw_filled_circle(x, y, radius, color, quadrant_mask)
+ * \brief Draw a filled circle or sector.
+ *
+ * The radius is the distance from the center to the circumference,
+ * which means that the total width or height of a circle will be
+ * (radius*2+1).
+ *
+ * The quadrant_mask parameter is a bitmask that decides which quadrants
+ * of the circle to draw. Use the GFX_QUADRANTn, GFX_xHALF and
+ * GFX_WHOLE constants and OR them together if required. Radius equal to
+ * zero gives a single pixel.
+ *
+ * \note This function only supports quadrants while gfx_draw_circle()
+ *       supports octants. This is to improve performance on drawing
+ *       filled circles.
+ *
+ * \param[in]  x           X coordinate of center.
+ * \param[in]  y           Y coordinate of center.
+ * \param[in]  radius      Circle radius in pixels.
+ * \param[in]  color       Pixel operation.
+ * \param[in]  quadrant_mask Bitmask indicating which quadrants to draw.
+ */
+
+/** @} */
+
+/** @} */
+
+/**
+ * \page asfdoc_common2_gfx_mono_quickstart Quick Start Guide for the mono graphics service
+ *
+ * This is the quick start guide for the \ref asfdoc_common2_gfx_mono "Monochrome Graphics service",
+ * with step-by-step instructions on how to configure and use it for a specific
+ * use case.
+ *
+ * \section asfdoc_common2_gfx_mono_quickstart_basic Basic usage of the graphics service
+ * This use case will demonstrate initializing the mono graphics service and
+ * then draw a black line on the screen from coordinates X=10, Y=10 to X=20,
+ * Y=20.
+ *
+ * \section asfdoc_common2_gfx_mono_basic_usage Usage steps
+ * \subsection asfdoc_common2_gfx_mono_basic_usage_code Example code
+ * Add to, e.g., the main function in the application C-file:
+ * \code
+	system_init();
+	gfx_mono_init();
+	gfx_mono_draw_line(10, 10, 20, 20, GFX_PIXEL_SET);
+\endcode
+ *
+ * \subsection gfx_mono_basic_usage_workflow Workflow
+ * -# Initialize system:
+ *  - \code system_init(); \endcode
+ * -# Initialize monochrome graphics service
+ *  - \code gfx_mono_init(); \endcode
+ *  - \note This will call the init function for the low level display
+ *          controller driver and intialize the screen to a cleared background.
+ * -# Draw a line from 10,10 to 20,20:
+ * -  \code gfx_mono_draw_line(10, 10, 20, 20, GFX_PIXEL_SET); \endcode
+ * -  \note This uses GFX_PIXEL_SET to set the display pixels on the line;
+ *          other options can be found in \ref gfx_mono_color.
+ */
+
+/**
+ * \page asfdoc_common2_gfx_mono_exqsg Examples for GFX Mono Library
+ *
+ * This is a list of the available Quick Start guides (QSGs) and example applications
+ * for \ref asfdoc_common2_gfx_mono. QSGs are simple examples with step-by-step instructions
+ * to configure and use this driver in a selection of use cases. Note that QSGs can be compiled as
+ * a standalone application or be added to the user application.
+ *  - \subpage asfdoc_common2_gfx_mono_quickstart
+ *  - \subpage asfdoc_common2_gfx_mono_font_quickstart
+ *  - \subpage asfdoc_common2_gfx_mono_sysfont_example
+ *  - \subpage asfdoc_common2_gfx_mono_spinner_example
+ *
+ */
+
+
+#endif /* GFX_MONO_H */
diff --git a/common2/services/gfx_mono/gfx_mono_c12832_a1z.c b/common2/services/gfx_mono/gfx_mono_c12832_a1z.c
new file mode 100644
index 00000000..29633572
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_c12832_a1z.c
@@ -0,0 +1,369 @@
+/**
+ * \file
+ *
+ * \brief Haven Display C12832 A1Z display glue code for display controller
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include "gfx_mono_c12832_a1z.h"
+
+/* If we are using a serial interface without readback, use framebuffer */
+#ifdef ST7565R_SERIAL_INTERFACE
+# define CONFIG_ST7565R_FRAMEBUFFER
+#endif
+
+#ifdef CONFIG_ST7565R_FRAMEBUFFER
+static uint8_t framebuffer[GFX_MONO_LCD_FRAMEBUFFER_SIZE];
+#endif
+
+/**
+ * \brief Initialize ST7565R controller and LCD display.
+ * It will also write the graphic controller RAM to all zeroes.
+ *
+ * \note This function will clear the contents of the display.
+ */
+void gfx_mono_st7565r_init(void)
+{
+	uint8_t page;
+	uint8_t column;
+
+#ifdef CONFIG_ST7565R_FRAMEBUFFER
+	gfx_mono_set_framebuffer(framebuffer);
+#endif
+
+	/* Initialize the low-level display controller. */
+	st7565r_init();
+
+	/* Set display to output data from line 0 */
+	st7565r_set_display_start_line_address(0);
+
+	/* Clear the contents of the display.
+	 * If using a framebuffer (SPI interface) it will both clear the
+	 * controller memory and the framebuffer.
+	 */
+	for (page = 0; page < GFX_MONO_LCD_PAGES; page++) {
+		for (column = 0; column < GFX_MONO_LCD_WIDTH; column++) {
+			gfx_mono_put_byte(page, column, 0x00);
+		}
+	}
+}
+
+/**
+ * \brief Put framebuffer to LCD controller
+ *
+ * This function will output the complete framebuffer from RAM to the
+ * LCD controller.
+ *
+ * \note This is done automatically if using the graphic primitives. Only
+ * needed if you are manipulating the framebuffer directly in your code.
+ */
+void gfx_mono_st7565r_put_framebuffer(void)
+{
+	uint8_t page;
+
+	for (page = 0; page < GFX_MONO_LCD_PAGES; page++) {
+		st7565r_set_page_address(page);
+		st7565r_set_column_address(0);
+		gfx_mono_st7565r_put_page(framebuffer
+				+ (page * GFX_MONO_LCD_WIDTH), page, 0,
+				GFX_MONO_LCD_WIDTH);
+	}
+}
+
+/**
+ * \brief Draw pixel to screen
+ *
+ * \param[in] x         X coordinate of the pixel
+ * \param[in] y         Y coordinate of the pixel
+ * \param[in] color     Pixel operation
+ *
+ * The following will set the pixel at x=10,y=10:
+ * \code
+	gfx_mono_st7565r_draw_pixel(10, 10, GFX_PIXEL_SET);
+\endcode
+ * The following example will clear the pixel at x=10,y=10:
+ * \code
+	gfx_mono_st7565r_draw_pixel(10, 10, GFX_PIXEL_CLR);
+\endcode
+ * And the following will toggle the pixel at x=10,y=10:
+ * \code
+	gfx_mono_st7565r_draw_pixel(10, 10, GFX_PIXEL_XOR);
+\endcode
+ */
+void gfx_mono_st7565r_draw_pixel(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t color)
+{
+	uint8_t page;
+	uint8_t pixel_mask;
+	uint8_t pixel_value;
+
+	/* Discard pixels drawn outside the screen */
+	if ((x > GFX_MONO_LCD_WIDTH - 1) || (y > GFX_MONO_LCD_HEIGHT - 1)) {
+		return;
+	}
+
+	page = y / GFX_MONO_LCD_PIXELS_PER_BYTE;
+	pixel_mask = (1 << (y - (page * 8)));
+
+	/*
+	 * Read the page containing the pixel in interest, then perform the
+	 * requested action on this pixel before writing the page back to the
+	 * display.
+	 */
+	pixel_value = gfx_mono_get_byte(page, x);
+
+	switch (color) {
+	case GFX_PIXEL_SET:
+		pixel_value |= pixel_mask;
+		break;
+
+	case GFX_PIXEL_CLR:
+		pixel_value &= ~pixel_mask;
+		break;
+
+	case GFX_PIXEL_XOR:
+		pixel_value ^= pixel_mask;
+		break;
+
+	default:
+		break;
+	}
+
+	gfx_mono_put_byte(page, x, pixel_value);
+}
+
+/**
+ * \brief Get the pixel value at x,y
+ *
+ * \param[in] x      X coordinate of pixel
+ * \param[in] y      Y coordinate of pixel
+ * \return Non zero value if pixel is set.
+ *
+ * The following example will read the pixel value from x=10,y=10:
+ * \code
+	pixelval = gfx_mono_st7565r_get_pixel(10,10);
+\endcode
+ */
+uint8_t gfx_mono_st7565r_get_pixel(gfx_coord_t x, gfx_coord_t y)
+{
+	uint8_t page;
+	uint8_t pixel_mask;
+
+	if ((x > GFX_MONO_LCD_WIDTH - 1) || (y > GFX_MONO_LCD_HEIGHT - 1)) {
+		return 0;
+	}
+
+	page = y / GFX_MONO_LCD_PIXELS_PER_BYTE;
+	pixel_mask = (1 << (y - (page * 8)));
+
+	return gfx_mono_get_byte(page, x) & pixel_mask;
+}
+
+/**
+ * \brief Put a page from RAM to display controller.
+ *
+ * If the controller is accessed by the SPI interface, we can not read
+ * back data from the LCD controller RAM. Because of this all data that is
+ * written to the LCD controller in this mode is also written to a framebuffer 
+ * in MCU RAM.
+ *
+ * \param[in] data Pointer to data to be written
+ * \param[in] page Page address
+ * \param[in] column Offset into page (x coordinate)
+ * \param[in] width Number of bytes to be written.
+ *
+ * The following example will write 32 bytes from data_buf to the page 0,
+ * column 10. This will place data_buf in the rectangle x1=10,y1=0,x2=42,y2=8
+ * (10 pixels from the upper left corner of the screen):
+ * \code
+	gfx_mono_st7565r_put_page(data_buf, 0, 10, 32);
+\endcode
+ */
+void gfx_mono_st7565r_put_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t column, gfx_coord_t width)
+{
+#ifdef CONFIG_ST7565R_FRAMEBUFFER
+	gfx_mono_framebuffer_put_page(data, page, column, width);
+#endif
+	st7565r_set_page_address(page);
+	st7565r_set_column_address(column);
+
+	do {
+		st7565r_write_data(*data++);
+	} while (--width);
+}
+
+/**
+ * \brief Read a page from the LCD controller
+ *
+ * If the LCD controller is accessed by the SPI interface we cannot read
+ * data directly from the controller. In that case we will read the data from
+ * the local framebuffer instead.
+ *
+ * \param[in] data   Pointer where to store the read data
+ * \param[in] page   Page address
+ * \param[in] column Offset into page (x coordinate)
+ * \param[in] width  Number of bytes to be read
+ *
+ * The following example will read back the first 128 bytes (first page) from
+ * the display memory:
+ * \code
+	gfx_mono_st7565r_get_page(read_buffer, 0, 0, 128);
+\endcode
+ */
+void gfx_mono_st7565r_get_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t column, gfx_coord_t width)
+{
+#ifdef CONFIG_ST7565R_FRAMEBUFFER
+	gfx_mono_framebuffer_get_page(data, page, column, width);
+#else
+	st7565r_set_page_address(page);
+	st7565r_set_column_address(column);
+
+	do {
+		*data++ = st7565r_read_data();
+	} while (--width);
+#endif
+}
+
+/**
+ * \brief Put a byte to the display controller RAM
+ *
+ * If the LCD controller is accessed by the SPI interface we will also put the
+ * data to the local framebuffer.
+ *
+ * \param[in] page Page address
+ * \param[in] column Page offset (x coordinate)
+ * \param[in] data Data to be written
+ *
+ * This example will put the value 0xFF to the first byte in the display memory
+ * setting a 8 pixel high column of pixels in the upper left corner of the
+ * display.
+ * \code
+	gfx_mono_st7565r_put_byte(0, 0, 0xFF);
+\endcode
+ */
+void gfx_mono_st7565r_put_byte(gfx_coord_t page, gfx_coord_t column,
+		uint8_t data)
+{
+#ifdef CONFIG_ST7565R_FRAMEBUFFER
+	gfx_mono_framebuffer_put_byte(page, column, data);
+#endif
+
+	st7565r_set_page_address(page);
+	st7565r_set_column_address(column);
+
+	st7565r_write_data(data);
+}
+
+/**
+ * \brief Get a byte from the display controller RAM
+ *
+ * If the LCD controller is accessed by the SPI interface we cannot read the
+ * data. In this case return the data from the local framebuffer instead.
+ *
+ * \param page Page address
+ * \param column Page offset (x coordinate)
+ * \return data from LCD controller or framebuffer.
+ *
+ * The following code will read the first byte from the display memory or the
+ * local framebuffer if direct read is not possible. The data represents the
+ * pixels from x = 0 and y = 0 to y = 7.
+ * \code
+	data = gfx_mono_st7565r_get_byte(0, 0);
+\endcode
+ */
+uint8_t gfx_mono_st7565r_get_byte(gfx_coord_t page, gfx_coord_t column)
+{
+#ifdef CONFIG_ST7565R_FRAMEBUFFER
+	return gfx_mono_framebuffer_get_byte(page, column);
+
+#else
+	st7565r_set_page_address(page);
+	st7565r_set_column_address(column);
+
+	return st7565r_read_data();
+
+#endif
+}
+
+/**
+ * \brief Read/Modify/Write a byte on the display controller
+ *
+ * This function will read the byte from the display controller (or the
+ * framebuffer if we cannot read directly from the controller) and
+ * do a mask operation on the byte according to the pixel operation selected
+ * by the color argument and the pixel mask provided.
+ *
+ * \param[in] page Page address
+ * \param[in] column Page offset (x coordinate)
+ * \param[in] pixel_mask Mask for pixel operation
+ * \param[in] color Pixel operation
+ *
+ * A small example that will XOR the first byte of display memory with 0xAA
+ * \code
+	gfx_mono_st7565r_mask_byte(0,0,0xAA,GFX_PIXEL_XOR);
+\endcode
+ */
+void gfx_mono_st7565r_mask_byte(gfx_coord_t page, gfx_coord_t column,
+		gfx_mono_color_t pixel_mask, gfx_mono_color_t color)
+{
+	gfx_mono_color_t temp = gfx_mono_get_byte(page, column);
+
+	switch (color) {
+	case GFX_PIXEL_SET:
+		temp |= pixel_mask;
+		break;
+
+	case GFX_PIXEL_CLR:
+		temp &= ~pixel_mask;
+		break;
+
+	case GFX_PIXEL_XOR:
+		temp ^= pixel_mask;
+		break;
+
+	default:
+		break;
+	}
+
+	gfx_mono_put_byte(page, column, temp);
+}
diff --git a/common2/services/gfx_mono/gfx_mono_c12832_a1z.h b/common2/services/gfx_mono/gfx_mono_c12832_a1z.h
new file mode 100644
index 00000000..9aa99c02
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_c12832_a1z.h
@@ -0,0 +1,168 @@
+/**
+ * \file
+ *
+ * \brief Haven Display C12832 A1Z display glue code for display controller
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef GFX_MONO_C12832_A1Z_H
+#define GFX_MONO_C12832_A1Z_H
+#include "compiler.h"
+#include "st7565r.h"
+
+#include "gfx_mono.h"
+#include "gfx_mono_framebuffer.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_C12832_A1Z_group C12832_A1Z graphic library abstraction
+ *
+ * This module is an abstraction layer between the graphic library and the
+ * C12832_A1Z monochrome LCD display connected to a ST7565R LCD controller.
+ *
+ * As the controller does not provide any hardware accelerated graphic, all the
+ * graphic primitives are provided by the \ref asfdoc_common2_gfx_mono_generic_group service.
+ *
+ * \note Do not call the gfx_mono_st7565r_ functions directly. use the gfx_mono
+ * names that are defined in this header and documented in \ref asfdoc_common2_gfx_mono .
+ * Ie. gfx_mono_draw_pixel() should be used, not gfx_mono_st7565r_draw_pixel()
+ * @{
+ */
+
+#define GFX_MONO_LCD_WIDTH              128
+#ifndef GFX_MONO_LCD_HEIGHT
+#	define GFX_MONO_LCD_HEIGHT             32
+#endif
+#define GFX_MONO_LCD_PIXELS_PER_BYTE    8
+#define GFX_MONO_LCD_PAGES              (GFX_MONO_LCD_HEIGHT / \
+	GFX_MONO_LCD_PIXELS_PER_BYTE)
+#define GFX_MONO_LCD_FRAMEBUFFER_SIZE   ((GFX_MONO_LCD_WIDTH * \
+	GFX_MONO_LCD_HEIGHT) / GFX_MONO_LCD_PIXELS_PER_BYTE)
+
+#define gfx_mono_draw_horizontal_line(x, y, length, color) \
+	gfx_mono_generic_draw_horizontal_line(x, y, length, color)
+
+#define gfx_mono_draw_vertical_line(x, y, length, color) \
+	gfx_mono_generic_draw_vertical_line(x, y, length, color)
+
+#define gfx_mono_draw_line(x1, y1, x2, y2, color) \
+	gfx_mono_generic_draw_line(x1, y1, x2, y2, color)
+
+#define gfx_mono_draw_rect(x, y, width, height, color) \
+	gfx_mono_generic_draw_rect(x, y, width, height, color)
+
+#define gfx_mono_draw_filled_rect(x, y, width, height, color) \
+	gfx_mono_generic_draw_filled_rect(x, y, width, height, \
+		color)
+
+#define gfx_mono_draw_circle(x, y, radius, color, octant_mask) \
+	gfx_mono_generic_draw_circle(x, y, radius, color, \
+		octant_mask)
+
+#define gfx_mono_draw_filled_circle(x, y, radius, color, quadrant_mask)	\
+	gfx_mono_generic_draw_filled_circle(x, y, radius, \
+		color, quadrant_mask)
+
+#define gfx_mono_put_bitmap(bitmap, x, y) \
+	gfx_mono_generic_put_bitmap(bitmap, x, y)
+
+#define gfx_mono_draw_pixel(x, y, color) \
+	gfx_mono_st7565r_draw_pixel(x, y, color)
+
+#define gfx_mono_get_pixel(x, y) \
+	gfx_mono_st7565r_get_pixel(x, y)
+
+#define gfx_mono_init()	\
+	gfx_mono_st7565r_init()
+
+#define gfx_mono_put_page(data, page, column, width) \
+	gfx_mono_st7565r_put_page(data, page, column, width)
+
+#define gfx_mono_get_page(data, page, column, width) \
+	gfx_mono_st7565r_get_page(data, page, column, width)
+
+#define gfx_mono_put_byte(page, column, data) \
+	gfx_mono_st7565r_put_byte(page, column, data)
+
+#define gfx_mono_get_byte(page, column)	\
+	gfx_mono_st7565r_get_byte(page, column)
+
+#define gfx_mono_mask_byte(page, column, pixel_mask, color) \
+	gfx_mono_st7565r_mask_byte(page, column, pixel_mask, color)
+
+#define gfx_mono_put_framebuffer() \
+	gfx_mono_st7565r_put_framebuffer()
+
+void gfx_mono_st7565r_put_framebuffer(void);
+
+void gfx_mono_st7565r_put_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t page_offset, gfx_coord_t width);
+
+void gfx_mono_st7565r_get_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t page_offset, gfx_coord_t width);
+
+void gfx_mono_st7565r_init(void);
+
+void gfx_mono_st7565r_draw_pixel(gfx_coord_t x, gfx_coord_t y,
+		gfx_mono_color_t color);
+
+uint8_t gfx_mono_st7565r_get_pixel(gfx_coord_t x, gfx_coord_t y);
+
+void gfx_mono_st7565r_put_byte(gfx_coord_t page, gfx_coord_t column,
+		uint8_t data);
+
+uint8_t gfx_mono_st7565r_get_byte(gfx_coord_t page, gfx_coord_t column);
+
+void gfx_mono_st7565r_mask_byte(gfx_coord_t page, gfx_coord_t column,
+		gfx_mono_color_t pixel_mask, gfx_mono_color_t color);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_C12832_A1Z_H */
diff --git a/common2/services/gfx_mono/gfx_mono_framebuffer.c b/common2/services/gfx_mono/gfx_mono_framebuffer.c
new file mode 100644
index 00000000..8e44bf8e
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_framebuffer.c
@@ -0,0 +1,266 @@
+/**
+ * \file
+ *
+ * \brief Local framebuffer
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "gfx_mono_framebuffer.h"
+
+/* Pointer to the framebuffer; updated by the gfx_mono_set_framebuffer function */
+static uint8_t *fbpointer;
+
+/**
+ * \brief Set the LCD framebuffer.
+ *
+ * \param[in] framebuffer A pointer to an allocated area of RAM that can hold the
+ * framebuffer.
+ *
+ * A small example:
+ * \code
+	uint8_t framebuffer[FRAMEBUFFER_SIZE];
+	gfx_mono_set_framebuffer(framebuffer);
+\endcode
+ */
+void gfx_mono_set_framebuffer(uint8_t *framebuffer)
+{
+	fbpointer = framebuffer;
+}
+
+/**
+ * \brief Put a page from RAM to the framebuffer
+ *
+ * \param[in] data Pointer to data to be written
+ * \param[in] page Page address
+ * \param[in] column Offset into page (x coordinate)
+ * \param[in] width Number of bytes to be written.
+ *
+ * The following example will write 32 bytes from data_buf to the page 0,
+ * column 10 (byte 10 to 42 in the framebuffer).
+ * \code
+	gfx_mono_framebuffer_put_page(data_buf, 0, 10, 32);
+\endcode
+ */
+void gfx_mono_framebuffer_put_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t column, gfx_coord_t width)
+{
+	gfx_mono_color_t *data_pt = data;
+	gfx_coord_t *framebuffer_pt = fbpointer +
+			((page * GFX_MONO_LCD_WIDTH) + column);
+
+	do {
+		*framebuffer_pt++ = *data_pt++;
+	} while (--width > 0);
+}
+
+/**
+ * \brief Read a page from the framebuffer
+ *
+ * \param[in] data   Pointer where to store the read data
+ * \param[in] page   Page address
+ * \param[in] column Offset into page (x coordinate)
+ * \param[in] width  Number of bytes to be read
+ *
+ * The following example will read back the first 128 bytes (first page) from
+ * the framebuffer:
+ * \code
+	gfx_mono_framebuffer_get_page(read_buffer, 0, 0, 128);
+\endcode
+ */
+void gfx_mono_framebuffer_get_page(gfx_mono_color_t *data, gfx_coord_t page, \
+		gfx_coord_t column, gfx_coord_t width)
+{
+	gfx_coord_t *framebuffer_pt = fbpointer +
+			((page * GFX_MONO_LCD_WIDTH) + column);
+	do {
+		*data++ = *framebuffer_pt++;
+	} while (--width > 0);
+}
+
+/**
+ * \brief Draw pixel to framebuffer
+ *
+ * \param[in] x         X coordinate of the pixel
+ * \param[in] y         Y coordinate of the pixel
+ * \param[in] color     Pixel operation
+ *
+ */
+void gfx_mono_framebuffer_draw_pixel(gfx_coord_t x, gfx_coord_t y,
+		gfx_mono_color_t color)
+{
+	uint8_t page;
+	uint8_t pixel_mask;
+	uint8_t pixel_value;
+
+	/* Discard pixels drawn outside the screen */
+	if ((x > GFX_MONO_LCD_WIDTH - 1) || (y > GFX_MONO_LCD_HEIGHT - 1)) {
+		return;
+	}
+
+	page = y / GFX_MONO_LCD_PIXELS_PER_BYTE;
+	pixel_mask = (1 << (y - (page * 8)));
+
+	/*
+	 * Read the page containing the pixel in interest, then perform the
+	 * requested action on this pixel before writing the page back to the
+	 * display.
+	 */
+	pixel_value = gfx_mono_framebuffer_get_byte(page, x);
+
+	switch (color) {
+	case GFX_PIXEL_SET:
+		pixel_value |= pixel_mask;
+		break;
+
+	case GFX_PIXEL_CLR:
+		pixel_value &= ~pixel_mask;
+		break;
+
+	case GFX_PIXEL_XOR:
+		pixel_value ^= pixel_mask;
+		break;
+
+	default:
+		break;
+	}
+
+	gfx_mono_framebuffer_put_byte(page, x, pixel_value);
+}
+
+/**
+ * \brief Get the pixel value at x,y in framebuffer
+ *
+ * \param[in] x      X coordinate of pixel
+ * \param[in] y      Y coordinate of pixel
+ * \return Non zero value if pixel is set.
+ *
+ */
+uint8_t gfx_mono_framebuffer_get_pixel(gfx_coord_t x, gfx_coord_t y)
+{
+	uint8_t page;
+	uint8_t pixel_mask;
+
+	if ((x > GFX_MONO_LCD_WIDTH - 1) || (y > GFX_MONO_LCD_HEIGHT - 1)) {
+		return 0;
+	}
+
+	page = y / GFX_MONO_LCD_PIXELS_PER_BYTE;
+	pixel_mask = (1 << (y - (page * 8)));
+
+	return gfx_mono_framebuffer_get_byte(page, x) & pixel_mask;
+}
+
+/**
+ * \brief Put a byte to the framebuffer
+ *
+ * \param[in] page   Page address
+ * \param[in] column Page offset (x coordinate)
+ * \param[in] data   Data to be written
+ *
+ * This example will put the value 0xFF to the first byte in the framebuffer
+ * \code
+	gfx_mono_framebuffer_put_byte(0, 0, 0xFF);
+\endcode
+ */
+void gfx_mono_framebuffer_put_byte(gfx_coord_t page, gfx_coord_t column,
+		uint8_t data)
+{
+	*(fbpointer + (page * GFX_MONO_LCD_WIDTH) + column) = data;
+}
+
+/**
+ * \brief Get a byte from the framebuffer
+ *
+ * \param[in] page   Page address
+ * \param[in] column Page offset (x coordinate)
+ * \return       data from LCD controller or framebuffer.
+ *
+ * The following code will read the first byte of the framebuffer
+ * \code
+	data = gfx_mono_framebuffer_get_byte(0, 0);
+\endcode
+ */
+uint8_t gfx_mono_framebuffer_get_byte(gfx_coord_t page, gfx_coord_t column)
+{
+	return *(fbpointer + (page * GFX_MONO_LCD_WIDTH) + column);
+}
+
+/**
+ * \brief Read/Modify/Write a byte in the framebuffer
+ *
+ * This function will read the byte from the framebuffer and
+ * do a mask operation on the byte according to the pixel operation selected
+ * by the color argument and the pixel mask provided.
+ *
+ * \param[in] page       Page address
+ * \param[in] column     Page offset (x coordinate)
+ * \param[in] pixel_mask Mask for pixel operation
+ * \param[in] color      Pixel operation
+ *
+ * A small example that will XOR the first byte of the framebuffer with 0xAA
+ * \code
+	gfx_mono_framebuffer_mask_byte(0,0,0xAA,GFX_PIXEL_XOR);
+\endcode
+ */
+void gfx_mono_framebuffer_mask_byte(gfx_coord_t page, gfx_coord_t column,
+		gfx_mono_color_t pixel_mask, gfx_mono_color_t color)
+{
+	gfx_mono_color_t temp;
+
+	temp = gfx_mono_get_byte(page, column);
+
+	switch (color) {
+	case GFX_PIXEL_SET:
+		temp |= pixel_mask;
+		break;
+
+	case GFX_PIXEL_CLR:
+		temp &= ~pixel_mask;
+		break;
+
+	case GFX_PIXEL_XOR:
+		temp ^= pixel_mask;
+		break;
+	}
+
+	gfx_mono_put_byte(page, column, temp);
+}
diff --git a/common2/services/gfx_mono/gfx_mono_framebuffer.h b/common2/services/gfx_mono/gfx_mono_framebuffer.h
new file mode 100644
index 00000000..a7b15436
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_framebuffer.h
@@ -0,0 +1,96 @@
+/**
+ * \file
+ *
+ * \brief Monochrome graphic library framebuffer device
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef GFX_MONO_FRAMEBUFFER
+#define GFX_MONO_FRAMEBUFFER
+
+#include "gfx_mono.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_framebuffer_group Framebuffer
+ *
+ * This module provides read/write from and to a framebuffer in RAM. This is
+ * needed when using a controller that does not provide a way to read back data
+ * from the LCD controller memory. In this case we need to buffer the data in
+ * a local framebuffer to allow manipulation on pixel level. It is generally
+ * not recommended to access the framebuffer directly; this is handled by the
+ * graphic driver when needed.
+ *
+ * @{
+ */
+
+void gfx_mono_set_framebuffer(uint8_t *framebuffer);
+
+void gfx_mono_framebuffer_put_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t page_offset, gfx_coord_t width);
+
+void gfx_mono_framebuffer_get_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t page_offset, gfx_coord_t width);
+
+void gfx_mono_framebuffer_draw_pixel(gfx_coord_t x, gfx_coord_t y,
+		gfx_mono_color_t color);
+
+uint8_t gfx_mono_framebuffer_get_pixel(gfx_coord_t x, gfx_coord_t y);
+
+void gfx_mono_framebuffer_put_byte(gfx_coord_t page, gfx_coord_t column,
+		uint8_t data);
+
+uint8_t gfx_mono_framebuffer_get_byte(gfx_coord_t page, gfx_coord_t column);
+
+void gfx_mono_framebuffer_mask_byte(gfx_coord_t page, gfx_coord_t column,
+		gfx_mono_color_t pixel_mask, gfx_mono_color_t color);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_FRAMEBUFFER */
diff --git a/common2/services/gfx_mono/gfx_mono_generic.c b/common2/services/gfx_mono/gfx_mono_generic.c
new file mode 100644
index 00000000..42e18bae
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_generic.c
@@ -0,0 +1,506 @@
+/**
+ * \file
+ *
+ * \brief Generic monochrome LCD graphic primitives
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono_generic_group
+ * @{
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include "gfx_mono_generic.h"
+
+/**
+ * \brief Draw a horizontal line, one pixel wide (generic implementation)
+ *
+ * \note This function does a very simple bounds checking that does not
+ * check if the line is placed outside the screen. If you supply an
+ * x- or y-coordinate outside the display the behaviour is undefined,
+ * and you risk overwriting portions of internal SRAM.
+ *
+ * \param[in]  x          X coordinate of leftmost pixel.
+ * \param[in]  y          Y coordinate of the line.
+ * \param[in]  length     Length of the line in pixels.
+ * \param[in]  color      Pixel operation of the line.
+ */
+void gfx_mono_generic_draw_horizontal_line(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t length, enum gfx_mono_color color)
+{
+	uint8_t page;
+	uint8_t pixelmask;
+	uint8_t temp;
+
+	/* Clip line length if too long */
+	if (x + length > GFX_MONO_LCD_WIDTH) {
+		length = GFX_MONO_LCD_WIDTH - x;
+	}
+
+	page = y / 8;
+	pixelmask = (1 << (y - (page * 8)));
+
+	if (length == 0) {
+		/* Nothing to do. Move along. */
+		return;
+	}
+
+	switch (color) {
+	case GFX_PIXEL_SET:
+		while (length-- > 0) {
+			temp = gfx_mono_get_byte(page, x + length);
+			temp |= pixelmask;
+			gfx_mono_put_byte(page, x + length, temp);
+		}
+		break;
+
+	case GFX_PIXEL_CLR:
+		while (length-- > 0) {
+			temp = gfx_mono_get_byte(page, x + length);
+			temp &= ~pixelmask;
+			gfx_mono_put_byte(page, x + length, temp);
+		}
+		break;
+
+	case GFX_PIXEL_XOR:
+		while (length-- > 0) {
+			temp = gfx_mono_get_byte(page, x + length);
+			temp ^= pixelmask;
+			gfx_mono_put_byte(page, x + length, temp);
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+/**
+ * \brief Draw a vertical line, one pixel wide (generic implementation)
+ *
+ * \note This function does a very simple bounds checking that does not
+ * check if the line is placed outside the screen. If you supply an
+ * x- or y-coordinate outside the display the behaviour is undefined,
+ * and you risk overwriting portions of internal SRAM.
+ *
+ * \param[in]  x          X coordinate of the line.
+ * \param[in]  y          Y coordinate of the topmost pixel.
+ * \param[in]  length     Length of the line in pixels.
+ * \param[in]  color      Pixel operation of the line.
+ */
+void gfx_mono_generic_draw_vertical_line(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t length, enum gfx_mono_color color)
+{
+	if (length == 0) {
+		return;
+	}
+
+	gfx_coord_t y2 = y + length - 1;
+
+	if (y == y2) {
+		gfx_mono_draw_pixel(x, y, color);
+		return;
+	}
+
+	if (y2 >= GFX_MONO_LCD_HEIGHT - 1) {
+		y2 = GFX_MONO_LCD_HEIGHT - 1;
+	}
+
+	gfx_coord_t y1page = y / 8;
+	gfx_coord_t y2page = y2 / 8;
+
+	uint8_t y1bitpos = y & 0x07;
+	uint8_t y2bitpos = y2 & 0x07;
+
+	uint8_t y1pixelmask = 0xFF << y1bitpos;
+	uint8_t y2pixelmask = 0xFF >> (7 - y2bitpos);
+
+	/* The pixels are on the same page; combine masks */
+	if (y1page == y2page) {
+		uint8_t pixelmask = y1pixelmask & y2pixelmask;
+		gfx_mono_mask_byte(y1page, x, pixelmask, color);
+	} else {
+		gfx_mono_mask_byte(y1page, x, y1pixelmask, color);
+
+		while (++y1page < y2page) {
+			gfx_mono_mask_byte(y1page, x, 0xFF, color);
+		}
+
+		gfx_mono_mask_byte(y2page, x, y2pixelmask, color);
+	}
+}
+
+/**
+ * \brief Draw a line between two arbitrary points (generic implementation).
+ *
+ * \param[in]  x1          Start X coordinate.
+ * \param[in]  y1          Start Y coordinate.
+ * \param[in]  x2          End X coordinate.
+ * \param[in]  y2          End Y coordinate.
+ * \param[in]  color       Pixel operation of the line.
+ */
+void gfx_mono_generic_draw_line(gfx_coord_t x1, gfx_coord_t y1,
+		gfx_coord_t x2, gfx_coord_t y2,
+		enum gfx_mono_color color)
+{
+	uint8_t i;
+	uint8_t x;
+	uint8_t y;
+	int8_t xinc;
+	int8_t yinc;
+	int8_t dx;
+	int8_t dy;
+	int8_t e;
+
+	/* swap x1,y1  with x2,y2 */
+	if (x1 > x2) {
+		dx = x1;
+		x1 = x2;
+		x2 = dx;
+		dy = y1;
+		y1 = y2;
+		y2 = dy;
+	}
+
+	dx = x2 - x1;
+	dy = y2 - y1;
+
+	x = x1;
+	y = y1;
+
+	if (dx < 0) {
+		xinc = -1;
+		dx = -dx;
+	} else {
+		xinc = 1;
+	}
+
+	if (dy < 0) {
+		yinc = -1;
+		dy = -dy;
+	} else {
+		yinc = 1;
+	}
+
+	if (dx > dy) {
+		e = dy - dx;
+		for (i = 0; i <= dx; i++) {
+			gfx_mono_draw_pixel(x, y, color);
+			if (e >= 0) {
+				e -= dx;
+				y += yinc;
+			}
+
+			e += dy;
+			x += xinc;
+		}
+	} else {
+		e = dx - dy;
+		for (i = 0; i <= dy; i++) {
+			gfx_mono_draw_pixel(x, y, color);
+			if (e >= 0) {
+				e -= dy;
+				x += xinc;
+			}
+
+			e += dx;
+			y += yinc;
+		}
+	}
+}
+
+/**
+ * \brief Draw an outline of a rectangle (generic implementation).
+ *
+ * \param[in]  x           X coordinate of the left side.
+ * \param[in]  y           Y coordinate of the top side.
+ * \param[in]  width       Width of the rectangle.
+ * \param[in]  height      Height of the rectangle.
+ * \param[in] color       Pixel operation of the line.
+ */
+void gfx_mono_generic_draw_rect(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t width, gfx_coord_t height,
+		enum gfx_mono_color color)
+{
+	gfx_mono_draw_horizontal_line(x, y, width, color);
+	gfx_mono_draw_horizontal_line(x, y + height - 1, width, color);
+
+	gfx_mono_draw_vertical_line(x, y, height, color);
+	gfx_mono_draw_vertical_line(x + width - 1, y, height, color);
+}
+
+/**
+ * \brief Draw a filled rectangle (generic implementation).
+ *
+ * \param[in]  x           X coordinate of the left side.
+ * \param[in]  y           Y coordinate of the top side.
+ * \param[in]  width       Width of the rectangle.
+ * \param[in]  height      Height of the rectangle.
+ * \param[in]  color       Pixel operation of the line
+ */
+void gfx_mono_generic_draw_filled_rect(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t width, gfx_coord_t height,
+		enum gfx_mono_color color)
+{
+	if (height == 0) {
+		/* Nothing to do. Move along. */
+		return;
+	}
+
+	while (height-- > 0) {
+		gfx_mono_draw_horizontal_line(x, y + height, width, color);
+	}
+}
+
+/**
+ * \brief Draw an outline of a circle or arc (generic implementation).
+ *
+ * The radius is the distance from the center to the circumference,
+ * which means that the total width or height of a circle will be
+ * (radius*2+1).
+ *
+ * The octant_mask parameter is a bitmask that decides which octants of
+ * the circle to draw. Use the GFX_OCTANTn, GFX_QUADRANTn, GFX_xHALF and
+ * GFX_WHOLE constants and OR them together if required. Radius equal to
+ * zero gives a single pixel.
+ *
+ * \param[in]  x           X coordinate of center.
+ * \param[in]  y           Y coordinate of center.
+ * \param[in]  radius      Circle radius in pixels.
+ * \param[in]  color       Pixel operation.
+ * \param[in]  octant_mask Bitmask indicating which octants to draw.
+ */
+void gfx_mono_generic_draw_circle(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t radius, enum gfx_mono_color color,
+		uint8_t octant_mask)
+{
+	gfx_coord_t offset_x;
+	gfx_coord_t offset_y;
+	int16_t error;
+
+	/* Draw only a pixel if radius is zero. */
+	if (radius == 0) {
+		gfx_mono_draw_pixel(x, y, color);
+		return;
+	}
+
+	/* Set up start iterators. */
+	offset_x = 0;
+	offset_y = radius;
+	error = 3 - 2 * radius;
+
+	/* Iterate offsetX from 0 to radius. */
+	while (offset_x <= offset_y) {
+		/* Draw one pixel for each octant enabled in octant_mask. */
+		if (octant_mask & GFX_OCTANT0) {
+			gfx_mono_draw_pixel(x + offset_y, y - offset_x, color);
+		}
+
+		if (octant_mask & GFX_OCTANT1) {
+			gfx_mono_draw_pixel(x + offset_x, y - offset_y, color);
+		}
+
+		if (octant_mask & GFX_OCTANT2) {
+			gfx_mono_draw_pixel(x - offset_x, y - offset_y, color);
+		}
+
+		if (octant_mask & GFX_OCTANT3) {
+			gfx_mono_draw_pixel(x - offset_y, y - offset_x, color);
+		}
+
+		if (octant_mask & GFX_OCTANT4) {
+			gfx_mono_draw_pixel(x - offset_y, y + offset_x, color);
+		}
+
+		if (octant_mask & GFX_OCTANT5) {
+			gfx_mono_draw_pixel(x - offset_x, y + offset_y, color);
+		}
+
+		if (octant_mask & GFX_OCTANT6) {
+			gfx_mono_draw_pixel(x + offset_x, y + offset_y, color);
+		}
+
+		if (octant_mask & GFX_OCTANT7) {
+			gfx_mono_draw_pixel(x + offset_y, y + offset_x, color);
+		}
+
+		/* Update error value and step offset_y when required. */
+		if (error < 0) {
+			error += ((offset_x << 2) + 6);
+		} else {
+			error += (((offset_x - offset_y) << 2) + 10);
+			--offset_y;
+		}
+
+		/* Next X. */
+		++offset_x;
+	}
+}
+
+/**
+ * \brief Draw a filled circle or sector (generic implementation).
+ *
+ * The radius is the distance from the center to the circumference,
+ * which means that the total width or height of a circle will be
+ * (radius*2+1).
+ *
+ * The quadrant_mask parameter is a bitmask that decides which quadrants
+ * of the circle to draw. Use the GFX_QUADRANTn, GFX_xHALF and
+ * GFX_WHOLE constants and OR them together if required. Radius equal to
+ * zero gives a single pixel.
+ *
+ * \note This function only supports quadrants while gfx_draw_circle()
+ *       supports octants. This is to improve performance on drawing
+ *       filled circles.
+ *
+ * \param[in]  x           X coordinate of center.
+ * \param[in]  y           Y coordinate of center.
+ * \param[in]  radius      Circle radius in pixels.
+ * \param[in]  color       Pixel operation.
+ * \param[in]  quadrant_mask Bitmask indicating which quadrants to draw.
+ */
+void gfx_mono_generic_draw_filled_circle(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t radius, enum gfx_mono_color color,
+		uint8_t quadrant_mask)
+{
+	gfx_coord_t offset_x;
+	gfx_coord_t offset_y;
+	int16_t error;
+
+	/* Draw only a pixel if radius is zero. */
+	if (radius == 0) {
+		gfx_mono_draw_pixel(x, y, color);
+		return;
+	}
+
+	/* Set up start iterators. */
+	offset_x = 0;
+	offset_y = radius;
+	error = 3 - 2 * radius;
+
+	/* Iterate offset_x from 0 to radius. */
+	while (offset_x <= offset_y) {
+		/* Draw vertical lines tracking each quadrant. */
+		if (quadrant_mask & GFX_QUADRANT0) {
+			gfx_mono_draw_vertical_line(x + offset_y,
+					y - offset_x, offset_x + 1, color);
+			gfx_mono_draw_vertical_line(x + offset_x,
+					y - offset_y, offset_y + 1, color);
+		}
+
+		if (quadrant_mask & GFX_QUADRANT1) {
+			gfx_mono_draw_vertical_line(x - offset_y,
+					y - offset_x, offset_x + 1, color);
+			gfx_mono_draw_vertical_line(x - offset_x,
+					y - offset_y, offset_y + 1, color);
+		}
+
+		if (quadrant_mask & GFX_QUADRANT2) {
+			gfx_mono_draw_vertical_line(x - offset_y,
+					y, offset_x + 1, color);
+			gfx_mono_draw_vertical_line(x - offset_x,
+					y, offset_y + 1, color);
+		}
+
+		if (quadrant_mask & GFX_QUADRANT3) {
+			gfx_mono_draw_vertical_line(x + offset_y,
+					y, offset_x + 1, color);
+			gfx_mono_draw_vertical_line(x + offset_x,
+					y, offset_y + 1, color);
+		}
+
+		/* Update error value and step offset_y when required. */
+		if (error < 0) {
+			error += ((offset_x << 2) + 6);
+		} else {
+			error += (((offset_x - offset_y) << 2) + 10);
+			--offset_y;
+		}
+
+		/* Next X. */
+		++offset_x;
+	}
+}
+
+/**
+ * \brief Put bitmap from FLASH or RAM to display
+ *
+ * This function will output bitmap data from FLASH or RAM.
+ * The bitmap y-coordinate will be aligned with display pages, rounded down.
+ * Ie: placing a bitmap at x=10, y=5 will put the bitmap at x = 10,y = 0 and
+ * placing a bitmap at x = 10, y = 10 will put the bitmap at x = 10, y = 8
+ *
+ */
+void gfx_mono_generic_put_bitmap(struct gfx_mono_bitmap *bitmap, gfx_coord_t x,
+		gfx_coord_t y)
+{
+	gfx_coord_t num_pages = bitmap->height / 8;
+	gfx_coord_t page = y / 8;
+	gfx_coord_t column;
+	gfx_coord_t i;
+	gfx_mono_color_t temp;
+
+	switch (bitmap->type) {
+	case GFX_MONO_BITMAP_PROGMEM:
+		for (i = 0; i < num_pages; i++) {
+			for (column = 0; column < bitmap->width; column++) {
+				temp = PROGMEM_READ_BYTE(bitmap->data.progmem
+						+ (i * bitmap->width)
+						+ column);
+				gfx_mono_put_byte(i + page, column + x, temp);
+			}
+		}
+		break;
+
+	case GFX_MONO_BITMAP_RAM:
+		for (i = 0; i < num_pages; i++) {
+			gfx_mono_put_page(bitmap->data.pixmap
+					+ (i * bitmap->width), page + i, x,
+					bitmap->width);
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+/** @} */
diff --git a/common2/services/gfx_mono/gfx_mono_generic.h b/common2/services/gfx_mono/gfx_mono_generic.h
new file mode 100644
index 00000000..10ae0b4b
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_generic.h
@@ -0,0 +1,131 @@
+/**
+ * \file
+ *
+ * \brief Generic monochrome LCD graphic primitives
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef GFX_MONO_GENERIC
+#define GFX_MONO_GENERIC
+#include "gfx_mono.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_generic_group Generic monochrome graphic primitives
+ *
+ * This is a service providing generic implementations of graphic primitives
+ * - Horizontal line
+ * - Vertical line
+ * - Line
+ * - Circle (filled/not filled)
+ * - Rectangle (filled/not filled)
+ *
+ * it also provides functionality to draw a bitmap to the graphic memory.
+ *
+ * These functions are made available if the graphic hardware being used do
+ * not implement the functionality in hardware. This is true in most cases.
+ *
+ * This service is included as a requirement for a
+ * hardware specific component that uses these functions, and provides a
+ * asfdoc_common2_draw_pixel function.
+ *
+ * @{
+ */
+
+/**
+ * \brief Storage structure for bitmap pixel data and metadata
+ */
+struct gfx_mono_bitmap {
+	/** Width of bitmap */
+	gfx_coord_t width;
+	/** Height of bitmap */
+	gfx_coord_t height;
+	/** Bitmap type */
+	enum gfx_mono_bitmap_type type;
+	union {
+		/** Pointer to pixels for bitmap stored in RAM */
+		gfx_mono_color_t *pixmap;
+		/** Pointer to pixels for bitmap stored in progmem */
+		gfx_mono_color_t PROGMEM_T *progmem;
+	}
+	data;
+};
+
+void gfx_mono_generic_draw_horizontal_line(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t length, enum gfx_mono_color color);
+
+void gfx_mono_generic_draw_vertical_line(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t length, enum gfx_mono_color color);
+
+void gfx_mono_generic_draw_line(gfx_coord_t x1, gfx_coord_t y1,
+		gfx_coord_t x2, gfx_coord_t y2,
+		enum gfx_mono_color color);
+
+void gfx_mono_generic_draw_rect(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t width, gfx_coord_t height,
+		enum gfx_mono_color color);
+
+void gfx_mono_generic_draw_filled_rect(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t width, gfx_coord_t height,
+		enum gfx_mono_color color);
+
+void gfx_mono_generic_draw_circle(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t radius, enum gfx_mono_color color,
+		uint8_t octant_mask);
+
+void gfx_mono_generic_draw_filled_circle(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t radius, enum gfx_mono_color color,
+		uint8_t quadrant_mask);
+
+void gfx_mono_generic_put_bitmap(struct gfx_mono_bitmap *bitmap, gfx_coord_t x,
+		gfx_coord_t y);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_GENERIC */
diff --git a/common2/services/gfx_mono/gfx_mono_menu.c b/common2/services/gfx_mono/gfx_mono_menu.c
new file mode 100644
index 00000000..4d66b7a7
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_menu.c
@@ -0,0 +1,187 @@
+/**
+ * \file
+ *
+ * \brief Simple menu system
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "sysfont.h"
+#include <conf_menu.h>
+
+#include "gfx_mono_menu.h"
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono_menu
+ * @{
+ */
+
+PROGMEM_DECLARE(gfx_mono_color_t, arrow_right_data[]) = {
+	GFX_MONO_MENU_INDICATOR_BITMAP
+};
+
+struct gfx_mono_bitmap menu_bitmap_indicator = {
+	.height = GFX_MONO_MENU_INDICATOR_HEIGHT,
+	.width = GFX_MONO_MENU_INDICATOR_WIDTH,
+	.type = GFX_MONO_BITMAP_PROGMEM,
+	.data.progmem = arrow_right_data
+};
+
+/**
+ * \brief Draw menu strings and an icon by the current selection.
+ *
+ * \param[in] menu     a menu struct with menu settings
+ * \param[in] redraw   clear screen before drawing menu
+ */
+static void menu_draw(struct gfx_mono_menu *menu, bool redraw)
+{
+	static bool redraw_state;
+	uint8_t i;
+	uint8_t line = 1;
+	uint8_t menu_page = menu->current_selection /
+			GFX_MONO_MENU_ELEMENTS_PER_SCREEN;
+
+	if (menu->current_page != menu_page || redraw == true) {
+		/* clear screen if we have changed the page or menu and prepare
+		 * redraw */
+		gfx_mono_draw_filled_rect(0, SYSFONT_LINESPACING,
+				GFX_MONO_LCD_WIDTH,
+				GFX_MONO_LCD_HEIGHT - SYSFONT_LINESPACING,
+				GFX_PIXEL_CLR);
+		redraw_state = true;
+	}
+
+	menu->current_page = menu_page;
+
+	/* Clear old indicator icon */
+	gfx_mono_draw_filled_rect(0, SYSFONT_LINESPACING,
+			GFX_MONO_MENU_INDICATOR_WIDTH, GFX_MONO_LCD_HEIGHT -
+			SYSFONT_LINESPACING, GFX_PIXEL_CLR);
+
+	/* Put indicator icon on current selection */
+	gfx_mono_put_bitmap(&menu_bitmap_indicator, 0,
+			SYSFONT_LINESPACING * ((menu->current_selection %
+			GFX_MONO_MENU_ELEMENTS_PER_SCREEN) + 1));
+
+	/* Print visible options if page or menu has changed */
+	if (redraw_state == true) {
+		for (i = menu_page * GFX_MONO_MENU_ELEMENTS_PER_SCREEN;
+				i < menu_page *
+				GFX_MONO_MENU_ELEMENTS_PER_SCREEN +
+				GFX_MONO_MENU_ELEMENTS_PER_SCREEN &&
+				i < menu->num_elements; i++) {
+			gfx_mono_draw_progmem_string(
+					(char PROGMEM_PTR_T)menu->strings[i],
+					GFX_MONO_MENU_INDICATOR_WIDTH + 1,
+					line * SYSFONT_LINESPACING, &sysfont);
+			line++;
+		}
+		redraw_state = false;
+	}
+}
+
+/**
+ * *\brief Initialize the menu handling. Clear screen and draw menu.
+ *
+ * \param[in] menu  menu struct with menu options
+ *
+ */
+void gfx_mono_menu_init(struct gfx_mono_menu *menu)
+{
+	/* Clear screen */
+	gfx_mono_draw_filled_rect(0, 0,
+			GFX_MONO_LCD_WIDTH, GFX_MONO_LCD_HEIGHT, GFX_PIXEL_CLR);
+
+	/* Draw the menu title on the top of the screen */
+	gfx_mono_draw_progmem_string((char PROGMEM_PTR_T)menu->title,
+			0, 0, &sysfont);
+
+	/* Draw menu options below */
+	menu_draw(menu, true);
+}
+
+/**
+ * \brief Update menu depending on input.
+ *
+ * \param[in] menu  menu struct with menu options
+ * \param[in] keycode  keycode to process
+ *
+ * \retval selected menu option or status code
+ */
+uint8_t gfx_mono_menu_process_key(struct gfx_mono_menu *menu, uint8_t keycode)
+{
+	switch (keycode) {
+	case GFX_MONO_MENU_KEYCODE_DOWN:
+		if (menu->current_selection == menu->num_elements - 1) {
+			menu->current_selection = 0;
+		} else {
+			menu->current_selection++;
+		}
+
+		/* Update menu on display */
+		menu_draw(menu, false);
+		/* Nothing selected yet */
+		return GFX_MONO_MENU_EVENT_IDLE;
+
+	case GFX_MONO_MENU_KEYCODE_UP:
+		if (menu->current_selection) {
+			menu->current_selection--;
+		} else {
+			menu->current_selection = menu->num_elements - 1;
+		}
+
+		/* Update menu on display */
+		menu_draw(menu, false);
+		/* Nothing selected yet */
+		return GFX_MONO_MENU_EVENT_IDLE;
+
+	case GFX_MONO_MENU_KEYCODE_ENTER:
+		/* Got what we want. Return selection. */
+		return menu->current_selection;
+
+	case GFX_MONO_MENU_KEYCODE_BACK:
+		/* User pressed "back" key, inform user */
+		return GFX_MONO_MENU_EVENT_EXIT;
+
+	default:
+		/* Unknown key event */
+		return GFX_MONO_MENU_EVENT_IDLE;
+	}
+}
diff --git a/common2/services/gfx_mono/gfx_mono_menu.h b/common2/services/gfx_mono/gfx_mono_menu.h
new file mode 100644
index 00000000..6b88051d
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_menu.h
@@ -0,0 +1,136 @@
+/**
+ * \file
+ *
+ * \brief Simple menu system
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef GFX_MONO_MENU_H
+#define GFX_MONO_MENU_H
+
+#include "compiler.h"
+#include "conf_menu.h"
+#include "gfx_mono.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_menu Menu system for monochrome graphical displays
+ *
+ * This module provides a simple menu system for monochrome graphical
+ * displays.
+ *
+ * Typical flow of an application using the menu system:
+ *
+ * 1) Define menu structure.\n
+ * 2) Call asfdoc_common2_gfx_mono_menu_init.\n
+ * 3) Get user input.\n
+ * 4) Update menu with user input using function \ref
+ *    gfx_mono_menu_process_key.\n
+ * 5) Interpret \ref gfx_mono_menu_process_key return value.\n
+ * 6) Go to 3.\n
+ *
+ * The menu is declared using the \ref gfx_mono_menu struct.
+ *
+ * To start the menu system, call the \ref gfx_mono_menu_init function.
+ * This function will clear the display and draw the menu.
+ *
+ * Before the menu can be updated, you need input from the user. Methods for
+ * getting input is not part of the menu module.
+ *
+ * As soon as input is received, inform the menu system using the
+ * \ref gfx_mono_menu_process_key function.
+ * This function will then return a status code and act depending on the given
+ * keycode:
+ *
+ * MENU_KEYCODE_DOWN : Change selection to next menu item (or first if at
+ * bottom).
+ * Returns MENU_EVENT_IDLE.
+ *
+ * MENU_KEYCODE_UP : Change selection to previous menu item (or last if at top).
+ * Returns MENU_EVENT_IDLE.
+ *
+ * MENU_KEYCODE_ENTER : Nothing changes in menu. Returns the line selected.
+ *
+ * MENU_KEYCODE_BACK : Nothing changes in menu. Returns MENU_EVENT_EXIT.
+ *
+ * The value of the keycodes used are defined in conf_menu.h. These value can
+ * be changed if needed.
+ *
+ * The graphical indicator used to indicate menu selection is defined in
+ * conf_menu.h. This indicator can be changed if needed.
+ * @{
+ */
+
+/** \name Menu events definitions */
+/** @{ */
+/** Idle. Nothing to report. */
+#define GFX_MONO_MENU_EVENT_IDLE    0xFF
+/** Exit. User has pressed the back button. */
+#define GFX_MONO_MENU_EVENT_EXIT    0xFE
+/** @} */
+
+/** Maximum number of menu elements on display */
+#define GFX_MONO_MENU_ELEMENTS_PER_SCREEN ((GFX_MONO_LCD_HEIGHT / \
+	SYSFONT_LINESPACING) - 1)
+
+/** Menu struct */
+struct gfx_mono_menu {
+	PROGMEM_STRING_T title;
+	PROGMEM_STRING_T *strings;
+	uint8_t num_elements;
+	uint8_t current_selection;
+	uint8_t current_page;
+};
+
+void gfx_mono_menu_init(struct gfx_mono_menu *menu);
+uint8_t gfx_mono_menu_process_key(struct gfx_mono_menu *menu, uint8_t keycode);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_MENU_H */
diff --git a/common2/services/gfx_mono/gfx_mono_null.c b/common2/services/gfx_mono/gfx_mono_null.c
new file mode 100644
index 00000000..bf291a4e
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_null.c
@@ -0,0 +1,64 @@
+/**
+ * \file
+ *
+ * \brief Monochrome graphic library NULL display device with framebuffer
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include "gfx_mono_null.h"
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono_null
+ * @{
+ */
+
+/* Memory for the framebuffer */
+static uint8_t framebuffer[GFX_MONO_LCD_FRAMEBUFFER_SIZE];
+
+/**
+ * \brief Initialize NULL driver.
+ */
+void gfx_mono_null_init(void)
+{
+	gfx_mono_set_framebuffer(framebuffer);
+}
+
+/** @} */
diff --git a/common2/services/gfx_mono/gfx_mono_null.h b/common2/services/gfx_mono/gfx_mono_null.h
new file mode 100644
index 00000000..e799f252
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_null.h
@@ -0,0 +1,138 @@
+/**
+ * \file
+ *
+ * \brief Monochrome graphic library NULL display device with framebuffer
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef GFX_MONO_NULL_H
+#define GFX_MONO_NULL_H
+
+#include "gfx_mono.h"
+#include "gfx_mono_framebuffer.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_null NULL display device
+ *
+ * This module provides empty read/write functions to a null device
+ * (framebuffer in RAM), removing the need for an actual display or
+ * controller during testing, and enabling the use of most XMEGA boards.
+ *
+ * @{
+ */
+
+#define GFX_MONO_LCD_WIDTH              128
+#define GFX_MONO_LCD_HEIGHT             32
+#define GFX_MONO_LCD_PIXELS_PER_BYTE    8
+#define GFX_MONO_LCD_PAGES              (GFX_MONO_LCD_HEIGHT / \
+	GFX_MONO_LCD_PIXELS_PER_BYTE)
+#define GFX_MONO_LCD_FRAMEBUFFER_SIZE   ((GFX_MONO_LCD_WIDTH * \
+	GFX_MONO_LCD_HEIGHT) / GFX_MONO_LCD_PIXELS_PER_BYTE)
+
+#define gfx_mono_draw_horizontal_line(x, y, length, color) \
+	gfx_mono_generic_draw_horizontal_line(x, y, length, color)
+
+#define gfx_mono_draw_vertical_line(x, y, length, color) \
+	gfx_mono_generic_draw_vertical_line(x, y, length, color)
+
+#define gfx_mono_draw_line(x1, y1, x2, y2, color) \
+	gfx_mono_generic_draw_line(x1, y1, x2, y2, color)
+
+#define gfx_mono_draw_rect(x, y, width, height, color) \
+	gfx_mono_generic_draw_rect(x, y, width, height, color)
+
+#define gfx_mono_draw_filled_rect(x, y, width, height, color) \
+	gfx_mono_generic_draw_filled_rect(x, y, width, height, \
+		color)
+
+#define gfx_mono_draw_circle(x, y, radius, color, octant_mask) \
+	gfx_mono_generic_draw_circle(x, y, radius, color, \
+		octant_mask)
+
+#define gfx_mono_draw_filled_circle(x, y, radius, color, quadrant_mask)	\
+	gfx_mono_generic_draw_filled_circle(x, y, radius, \
+		color, quadrant_mask)
+
+#define gfx_mono_put_bitmap(bitmap, x, y) \
+	gfx_mono_generic_put_bitmap(bitmap, x, y)
+
+#define gfx_mono_draw_pixel(x, y, color) \
+	gfx_mono_framebuffer_draw_pixel(x, y, color)
+
+#define gfx_mono_get_pixel(x, y) \
+	gfx_mono_framebuffer_get_pixel(x, y)
+
+#define gfx_mono_init()	\
+	gfx_mono_null_init()
+
+#define gfx_mono_put_page(data, page, column, width) \
+	gfx_mono_framebuffer_put_page(data, page, column, width)
+
+#define gfx_mono_get_page(data, page, column, width) \
+	gfx_mono_framebuffer_get_page(data, page, column, width)
+
+#define gfx_mono_put_byte(page, column, data) \
+	gfx_mono_framebuffer_put_byte(page, column, data)
+
+#define gfx_mono_get_byte(page, column)	\
+	gfx_mono_framebuffer_get_byte(page, column)
+
+#define gfx_mono_mask_byte(page, column, pixel_mask, color) \
+	gfx_mono_framebuffer_mask_byte(page, column, pixel_mask, color)
+
+#define gfx_mono_put_framebuffer() \
+	;
+
+void gfx_mono_null_init(void);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_NULL_H */
diff --git a/common2/services/gfx_mono/gfx_mono_screen_dump.h b/common2/services/gfx_mono/gfx_mono_screen_dump.h
new file mode 100644
index 00000000..87ed5840
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_screen_dump.h
@@ -0,0 +1,158 @@
+/**
+ * \file
+ *
+ * \brief Service for performing a screen dump to XPM image file
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef GFX_MONO_SCREEN_DUMP_H_INCLUDED
+#define GFX_MONO_SCREEN_DUMP_H_INCLUDED
+
+#include <serial.h>
+#include <gfx_mono.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_screen_dump XPM USART Screendump functions
+ *
+ * This service will add the possibility to dump the LCD screen to the USART
+ * using the XPM file format.
+ *
+ * Before using the screen dump function one should make sure that one has
+ * performed initialization of this service by calling
+ * \ref gfx_mono_screen_dump_init() to set up which USART to use. One should
+ * also make sure that one has initialized the gfx mono driver
+ * \ref gfx_mono_init() which will produce the screen buffer that is dumped
+ * trough the USART.
+ *
+ * \section asfdoc_common2_screen_dump_dependencies Dependencies
+ * This driver depends on the following modules:
+ * - asfdoc_samd20_sercom_spi_group
+ * @{
+ */
+
+/** TODO: This define should be fetched from the GFX display header file. */
+#define LCD_PAGE_HEIGHT 8
+#define GFX_MONO_LCD_PAGE_COUNT GFX_MONO_LCD_HEIGHT / LCD_PAGE_HEIGHT
+
+/* Define used for stringifying number defines */
+#define str(s) # s
+
+#define _XPM_HEADER(w, h) "/* XPM */\r\n" \
+	"static char * asf_screen_dump[] = {\r\n" \
+	"\"" str(w) " " str(h) " 2 1\",\r\n" \
+	"\"   c #FFFFFF\",\r\n"	\
+	"\".  c #000000\",\r\n"
+
+#define XPM_HEADER _XPM_HEADER(GFX_MONO_LCD_WIDTH, GFX_MONO_LCD_HEIGHT)
+
+#if UC3
+typedef avr32_usart_t dump_usart_t;
+#elif XMEGA
+typedef USART_t dump_usart_t;
+#endif
+
+/** storage for the usart to use when dumping data */
+dump_usart_t *dump_usart;
+
+static const uint8_t xpm_header[] = XPM_HEADER;
+
+/**
+ * \brief Init the framebuffer dump function
+ *
+ * \param[in] usart   pointer to the USART to use for dumping the image
+ * \param[in] options pointer to the USART options, see documentation
+ *
+ */
+static inline void gfx_mono_screen_dump_init(dump_usart_t *usart,
+		const usart_serial_options_t *options)
+{
+	dump_usart = usart;
+	usart_serial_init(usart, options);
+}
+
+/**
+ * \brief Function for dumping a LCD framebuffer
+ *
+ * This function will dump a framebuffer to a UART in XPM file format.
+ */
+static inline void gfx_mono_screen_dump(void)
+{
+	uint8_t page_buffer[GFX_MONO_LCD_WIDTH];
+	/* wait to receive a character on UART before sending */
+	uint8_t dummy;
+	usart_serial_getchar(dump_usart, &dummy);
+
+	/* write the XPM header */
+	usart_serial_write_packet(dump_usart, xpm_header,
+			(sizeof(xpm_header) - 1));
+
+	for (uint8_t page = 0; page < GFX_MONO_LCD_PAGE_COUNT; ++page) {
+		gfx_mono_get_page(page_buffer, page, 0, GFX_MONO_LCD_WIDTH);
+		for (uint8_t row = 0; row < LCD_PAGE_HEIGHT; ++row) {
+			usart_putchar(dump_usart, '"');
+			for (uint16_t column = 0; column < GFX_MONO_LCD_WIDTH;
+					++column) {
+				if ((page_buffer[column] & (0x01 << row)) !=
+						0x00) {
+					usart_putchar(dump_usart, '.');
+				} else {
+					usart_putchar(dump_usart, ' ');
+				}
+			}
+			usart_serial_write_packet(dump_usart,
+					(uint8_t *)"\",\r\n", 4);
+		}
+	}
+	usart_serial_write_packet(dump_usart, (uint8_t *)"};\r\n", 4);
+}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_SCREEN_DUMP_H_INCLUDED */
diff --git a/common2/services/gfx_mono/gfx_mono_spinctrl.c b/common2/services/gfx_mono/gfx_mono_spinctrl.c
new file mode 100644
index 00000000..5978f5c5
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_spinctrl.c
@@ -0,0 +1,697 @@
+/**
+ * \file
+ *
+ * \brief Spin control widget
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#include "sysfont.h"
+#include "stdio.h"
+#include "gfx_mono.h"
+#include "gfx_mono_spinctrl.h"
+
+PROGMEM_DECLARE(gfx_mono_color_t, spin_indicator_data[]) = {
+	GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP
+};
+
+PROGMEM_DECLARE(gfx_mono_color_t, indicator_data[]) = {
+	GFX_MONO_SPINCTRL_INDICATOR_BITMAP
+};
+
+struct gfx_mono_bitmap gfx_mono_spinctrl_bitmap_spin_indicator = {
+	.height = GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT,
+	.width = GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH,
+	.type = GFX_MONO_BITMAP_PROGMEM,
+	.data.progmem = spin_indicator_data
+};
+
+struct gfx_mono_bitmap gfx_mono_spinctrl_bitmap_indicator = {
+	.height = GFX_MONO_SPINCTRL_INDICATOR_HEIGHT,
+	.width = GFX_MONO_SPINCTRL_INDICATOR_WIDTH,
+	.type = GFX_MONO_BITMAP_PROGMEM,
+	.data.progmem = indicator_data
+};
+
+/**
+ * \brief Draw or delete indicator arrow in front of spinner
+ *
+ * \param[in] *spinner initialized gfx_mono_spinctrl struct
+ * \param[in] draw     true on draw, false on delete
+ */
+static void gfx_mono_spinctrl_draw_indicator(struct gfx_mono_spinctrl *spinner,
+		bool draw)
+{
+	if (draw) {
+		gfx_mono_put_bitmap(&gfx_mono_spinctrl_bitmap_indicator, 0,
+				spinner->y);
+	} else {
+		gfx_mono_draw_filled_rect(0, spinner->y,
+				GFX_MONO_SPINCTRL_INDICATOR_WIDTH,
+				GFX_MONO_SPINCTRL_INDICATOR_HEIGHT,
+				GFX_PIXEL_CLR);
+	}
+}
+
+/**
+ * \brief Draw or delete indicator in front of spinner data
+ *
+ * \param[in] spinner  pointer to initialized gfx_mono_spinctrl struct
+ * \param[in] draw     true on draw, false on delete
+ */
+static void gfx_mono_spinctrl_draw_spin_indicator(struct gfx_mono_spinctrl
+		*spinner, bool draw)
+{
+	if (draw) {
+		gfx_mono_put_bitmap(&gfx_mono_spinctrl_bitmap_spin_indicator,
+				GFX_MONO_LCD_WIDTH - GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH,
+				spinner->y);
+	} else {
+		gfx_mono_draw_filled_rect(GFX_MONO_LCD_WIDTH -
+				GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH,
+				spinner->y,
+				GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH,
+				GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT,
+				GFX_PIXEL_CLR);
+	}
+}
+
+/**
+ * \brief Draw OK button at bottom of screen
+ *
+ * This function draws an OK button at the bottom of the screen. It will
+ * also draw an indicator arrow in front of the button if the indicator bool
+ * is true. If the draw bool is false, the OK button will be deleted, and if
+ * the indicator bool is false, the indicator will be deleted.
+ *
+ * \param[in] draw       true on draw, false on delete
+ * \param[in] indicator  true on draw indicator, false on delete
+ */
+static void gfx_mono_spinctrl_draw_button(bool draw, bool indicator)
+{
+	uint8_t width;
+	uint8_t height;
+	uint8_t offset;
+	char string_buf[22];
+
+	/* Clear bottom line */
+	gfx_mono_draw_filled_rect(0,
+			(SYSFONT_HEIGHT + 1) *
+			GFX_MONO_SPINCTRL_MAX_ELEMENTS_IN_SPINCOLLECTION,
+			GFX_MONO_LCD_WIDTH, SYSFONT_HEIGHT, GFX_PIXEL_CLR);
+
+	snprintf(string_buf, sizeof(string_buf), "OK");
+	gfx_mono_get_string_bounding_box(string_buf, &sysfont, &width, &height);
+	offset = (GFX_MONO_LCD_WIDTH - width) / 2;
+
+	if (draw) {
+		/* Draw OK button in the middle of the last line */
+		gfx_mono_draw_string(string_buf, offset,
+				(SYSFONT_HEIGHT + 1) *
+				GFX_MONO_SPINCTRL_MAX_ELEMENTS_IN_SPINCOLLECTION,
+				&sysfont);
+		if (indicator) {
+			/* Draw indicator arrow in front of button */
+			gfx_mono_put_bitmap(&gfx_mono_spinctrl_bitmap_indicator,
+					offset - GFX_MONO_SPINCTRL_INDICATOR_WIDTH,
+					(SYSFONT_HEIGHT + 1) *
+					GFX_MONO_SPINCTRL_MAX_ELEMENTS_IN_SPINCOLLECTION);
+		} else {
+			/* Delete indicator */
+			gfx_mono_draw_filled_rect(offset -
+					GFX_MONO_SPINCTRL_INDICATOR_WIDTH,
+					(SYSFONT_HEIGHT + 1) *
+					GFX_MONO_SPINCTRL_MAX_ELEMENTS_IN_SPINCOLLECTION,
+					GFX_MONO_SPINCTRL_INDICATOR_WIDTH,
+					GFX_MONO_SPINCTRL_INDICATOR_HEIGHT,
+					GFX_PIXEL_CLR);
+		}
+	} else {
+		/* Delete OK button */
+		gfx_mono_draw_filled_rect(
+				offset - GFX_MONO_SPINCTRL_INDICATOR_WIDTH,
+				(SYSFONT_HEIGHT + 1) *
+				GFX_MONO_SPINCTRL_MAX_ELEMENTS_IN_SPINCOLLECTION, 20,
+				SYSFONT_HEIGHT, GFX_PIXEL_CLR);
+	}
+}
+
+/**
+ * \brief Draw spinner at its position.
+ *
+ * This function draws a spinner at its position.
+ * The title of the spinner is only drawn if the redraw option is set.
+ * If the spinner is in focus, arrows will be drawn next to the spinner value
+ * to indicate that it is spinnable.
+ *
+ * \param[in] spinner  pointer to initialized gfx_mono_spinctrl struct
+ * \param[in] redraw   true if title of spinner should be drawn
+ */
+void gfx_mono_spinctrl_draw(struct gfx_mono_spinctrl *spinner, bool redraw)
+{
+	char string_buf[GFX_MONO_SPINCTRL_INT_SPINNER_WIDTH];
+	uint8_t index;
+	uint8_t offset;
+
+	if (redraw) {
+		/* Clear line */
+		gfx_mono_draw_filled_rect(0, spinner->y, GFX_MONO_LCD_WIDTH,
+				SYSFONT_HEIGHT, GFX_PIXEL_CLR);
+		/* Draw title */
+		gfx_mono_draw_progmem_string((char PROGMEM_PTR_T)spinner->title,
+				GFX_MONO_SPINCTRL_INDICATOR_WIDTH + 1,
+				spinner->y, &sysfont);
+	}
+
+	if (spinner->in_focus) {
+		gfx_mono_spinctrl_draw_spin_indicator(spinner, true);
+	} else {
+		gfx_mono_spinctrl_draw_spin_indicator(spinner, false);
+	}
+
+	if (spinner->datatype == SPINTYPE_INTEGER) {
+		offset = GFX_MONO_LCD_WIDTH -
+				(SYSFONT_WIDTH *
+				GFX_MONO_SPINCTRL_INT_SPINNER_WIDTH);
+		snprintf(string_buf, sizeof(string_buf), "%d",
+				spinner->integer_data);
+		/* Delete previous spinner data */
+		gfx_mono_draw_filled_rect(offset, spinner->y,
+				GFX_MONO_LCD_WIDTH - offset -
+				GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH,
+				SYSFONT_HEIGHT,
+				GFX_PIXEL_CLR);
+		/* Draw integer data */
+		gfx_mono_draw_string(string_buf, offset, spinner->y, &sysfont);
+	} else if (spinner->datatype == SPINTYPE_STRING) {
+		index = spinner->strings.index;
+		offset = GFX_MONO_LCD_WIDTH -
+				(SYSFONT_WIDTH *
+				GFX_MONO_SPINCTRL_STRING_SPINNER_WIDTH);
+
+		/* Delete previous spinner data */
+		gfx_mono_draw_filled_rect(offset, spinner->y,
+				GFX_MONO_LCD_WIDTH - offset -
+				GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH,
+				SYSFONT_HEIGHT,
+				GFX_PIXEL_CLR);
+
+		/* Draw string data */
+		gfx_mono_draw_progmem_string(
+				(char PROGMEM_PTR_T)spinner->strings.data[index], offset,
+				spinner->y, &sysfont);
+	}
+}
+
+/**
+ * \brief Initialize a spinner.
+ *
+ * This function initializes a spinner to either
+ * \ref gfx_mono_spinctrl_type_t "SPINTYPE_STRING" spinner that spins through
+ * the strings in a \ref PROGMEM_STRING_T or a
+ * \ref gfx_mono_spinctrl_type_t "SPINTYPE_INTEGER" spinner that spins through
+ * integers.
+ * If the spinner type is SPINTYPE_INTEGER, it will spin from lower_limit to
+ * upper_limit.
+ * If the spinner type is SPINTYPE_STRING, a pointer to a PROGMEM_STRING_T must
+ * be provided, and the spinner will spin through the strings starting at
+ * index lower_limit ending at index upper_limit.
+ * The y parameter specifies where to place the spinner on the screen, but is
+ * overwritten if the spinner is put in a spincollection.
+ *
+ * \param[out] spinner      pointer to initialized gfx_mono_spinctrl struct
+ * \param[in] datatype     typer of spinner, integer or string
+ * \param[in] title        title of spinner
+ * \param[in] data         pointer to progmem string array if datatype is string.
+ *                     NULL if datatype is integer.
+ * \param[in] lower_limit  lower limit and start value of spinner's data
+ * \param[in] upper_limit  upper limit of spinner's data
+ * \param[in] y            y position of spinner
+ */
+void gfx_mono_spinctrl_init(struct gfx_mono_spinctrl *spinner,
+		gfx_mono_spinctrl_type_t datatype, PROGMEM_STRING_T title,
+		PROGMEM_STRING_T *data, int16_t lower_limit,
+		int16_t upper_limit,
+		gfx_coord_t y)
+{
+	/* Initialization of spinner parameters */
+	spinner->title = title;
+	spinner->datatype = datatype;
+	spinner->lower_limit = lower_limit;
+	spinner->upper_limit = upper_limit;
+	spinner->y = y;
+	spinner->in_focus = false;
+	spinner->last_saved_value = spinner->lower_limit;
+
+	if (datatype == SPINTYPE_STRING) {
+		spinner->strings.data = data;
+		spinner->strings.index = lower_limit;
+	} else {
+		spinner->integer_data = lower_limit;
+	}
+}
+
+/**
+ * \brief Initialize a spincollection.
+ *
+ * This function initializes a spincollection to which spinners can be added.
+ *
+ * \param[out] collection pointer to gfx_mono_spinctrl_spincollection to Initialize
+ */
+void gfx_mono_spinctrl_spincollection_init(struct
+		gfx_mono_spinctrl_spincollection *collection)
+{
+	collection->active_spinner = false;
+	collection->current_selection = 0;
+	collection->number_of_spinners = 0;
+	collection->init = true;
+}
+
+/**
+ * \brief Add spinner to spincollection
+ *
+ * This function adds an initialized spinner to a spincollection and positions
+ * it below any other spinners in the spincollection on the screen. The
+ * spinners in the spincollection are linked together and number of spinners is
+ * updated.
+ * It is not possible to add more spinners than
+ * \ref GFX_MONO_SPINCTRL_MAX_ELEMENTS_IN_SPINCOLLECTION "maximum number of
+ * spinners in a spincollection".
+ *
+ * \param[in] spinner   pointer to initialized gfx_mono_spinctrl struct to add
+ *                      to collection
+ * \param[in] spinners  pointer to initialized gfx_mono_spinctrl_spincollection
+ *                      struct
+ *
+ */
+void gfx_mono_spinctrl_spincollection_add_spinner(struct
+		gfx_mono_spinctrl *spinner,
+		struct gfx_mono_spinctrl_spincollection *spinners)
+{
+	uint8_t i;
+	struct gfx_mono_spinctrl *lastspinner;
+
+	/* Do not add more spinner elements than maximum number of spinners */
+	if (spinners->number_of_spinners >=
+			GFX_MONO_SPINCTRL_MAX_ELEMENTS_IN_SPINCOLLECTION) {
+		return;
+	}
+
+	/* Place new spinner below previous spinners on screen */
+	spinner->y = (SYSFONT_HEIGHT + 1) * spinners->number_of_spinners;
+
+	/* Add pointer to the spinner in spincollection if empty */
+	if (spinners->number_of_spinners == 0) {
+		spinners->collection = spinner;
+	} else {
+		lastspinner = spinners->collection;
+		for (i = 1; i < spinners->number_of_spinners; i++) {
+			lastspinner = lastspinner->next;
+		}
+		/* Link the new spinner to the current last spinner in the
+		 * collection */
+		lastspinner->next = spinner;
+		/* Link the current last spinner as previous spinner for new
+		 * spinner */
+		spinner->prev = lastspinner;
+	}
+
+	/* Set added spinner as last spinner in collection */
+	spinners->collection_last = spinner;
+	/* Update number of spinners in collection */
+	spinners->number_of_spinners++;
+}
+
+/**
+ * \brief Show spincollection
+ *
+ * This function draws all the spinners in a spincollection to the screen,
+ * together with an OK button at the bottom. It also draws an indicator arrow
+ * in front of the top spinner.
+ *
+ * \param[in] spinners pointer to initialized spincollection to display
+ */
+void gfx_mono_spinctrl_spincollection_show(struct
+		gfx_mono_spinctrl_spincollection *spinners)
+{
+	uint8_t i;
+	struct gfx_mono_spinctrl *iterator;
+
+	/* Clear screen */
+	gfx_mono_draw_filled_rect(0, 0, GFX_MONO_LCD_WIDTH, GFX_MONO_LCD_HEIGHT,
+			GFX_PIXEL_CLR);
+
+	/* Make sure there are spinners in the collection */
+	if (spinners->number_of_spinners == 0) {
+		return;
+	}
+
+	/* Draw spinners on screen */
+	iterator = spinners->collection;
+	for (i = 0; i < spinners->number_of_spinners; i++) {
+		gfx_mono_spinctrl_draw(iterator, true);
+		iterator = iterator->next;
+	}
+	/* Draw OK button at bottom of screen */
+	gfx_mono_spinctrl_draw_button(true, false);
+	/* Draw indicator arrow in front of first spinner */
+	gfx_mono_spinctrl_draw_indicator(spinners->collection, true);
+}
+
+/**
+ * \brief Step up spinner data
+ *
+ * This function steps up the data, making sure it does not go
+ * beyond the upper limit. Wraps around if it does.
+ *
+ * \param[in] spinner pointer to initialized spinner.
+ */
+static void gfx_mono_spinctrl_step_up(struct gfx_mono_spinctrl *spinner)
+{
+	/* Check if spinner type is integer or string, increment integer data or
+	 * move to next string index.
+	 */
+	if (spinner->datatype == SPINTYPE_INTEGER) {
+		if (spinner->integer_data < spinner->upper_limit) {
+			spinner->integer_data++;
+		} else {
+			spinner->integer_data = spinner->lower_limit;
+		}
+	} else if (spinner->datatype == SPINTYPE_STRING) {
+		if (spinner->strings.index < spinner->upper_limit) {
+			spinner->strings.index++;
+		} else {
+			(spinner->strings.index) = spinner->lower_limit;
+		}
+	}
+}
+
+/**
+ * \brief Step down spinner data
+ *
+ * * This function steps down the data, making sure it does not go
+ * below the lower limit. Wraps around if it does.
+ *
+ * \param[in] spinner pointer to initialized spinner.
+ */
+static void gfx_mono_spinctrl_step_down(struct gfx_mono_spinctrl *spinner)
+{
+	/* Check if spinner type is integer or string, increment integer data,
+	 * move to next string index.
+	 */
+	if (spinner->datatype == SPINTYPE_INTEGER) {
+		if (spinner->integer_data > spinner->lower_limit) {
+			spinner->integer_data--;
+		} else {
+			spinner->integer_data = spinner->upper_limit;
+		}
+	} else if (spinner->datatype == SPINTYPE_STRING) {
+		if (spinner->strings.index > (spinner->lower_limit)) {
+			spinner->strings.index--;
+		} else {
+			spinner->strings.index = spinner->upper_limit;
+		}
+	}
+}
+
+/**
+ * \brief Update single spinner depending on input.
+ *
+ * \param[in] spinner pointer to initialized spinner.
+ * \param[in] keycode  keycode to process
+ *
+ * \retval selected            selected spinner value
+ * \retval GFX_MONO_SPINCTRL_EVENT_IDLE spinner spinning
+ * \retval GFX_MONO_SPINCTRL_EVENT_BACK spinner deselected
+ */
+int16_t gfx_mono_spinctrl_process_key(struct gfx_mono_spinctrl *spinner,
+		uint8_t keycode)
+{
+	switch (keycode) {
+	case GFX_MONO_SPINCTRL_KEYCODE_DOWN:
+		if (spinner->in_focus) {
+			gfx_mono_spinctrl_step_down(spinner);
+			/* Update spinner on display */
+			gfx_mono_spinctrl_draw(spinner, false);
+		}
+
+		/* Nothing selected yet */
+		return GFX_MONO_SPINCTRL_EVENT_IDLE;
+
+	case GFX_MONO_SPINCTRL_KEYCODE_UP:
+		if (spinner->in_focus) {
+			gfx_mono_spinctrl_step_up(spinner);
+			/* Update spinner on display */
+			gfx_mono_spinctrl_draw(spinner, false);
+		}
+
+		/* Nothing selected yet */
+		return GFX_MONO_SPINCTRL_EVENT_IDLE;
+
+	case GFX_MONO_SPINCTRL_KEYCODE_ENTER:
+		if (spinner->in_focus) {
+			if (spinner->datatype == SPINTYPE_INTEGER) {
+				spinner->in_focus = false;
+				gfx_mono_spinctrl_draw(spinner, false);
+				/* Store saved value in case of aborting spinner
+				 * later */
+				spinner->last_saved_value
+					= spinner->integer_data;
+				/* Got what we want. Return selection. */
+				return spinner->integer_data;
+			} else if (spinner->datatype == SPINTYPE_STRING) {
+				spinner->in_focus = false;
+				gfx_mono_spinctrl_draw(spinner, false);
+				/* Store saved value in case of aborting spinner
+				 * later */
+				spinner->last_saved_value
+					= spinner->strings.index;
+				/* Got what we want. Return selection. */
+				return spinner->strings.index;
+			}
+		} else {
+			/* Spinner selected */
+			spinner->in_focus = true;
+			gfx_mono_spinctrl_draw(spinner, false);
+			return GFX_MONO_SPINCTRL_EVENT_IDLE;
+		}
+
+	case GFX_MONO_SPINCTRL_KEYCODE_BACK:
+		/* User pressed "back" key, */
+		spinner->in_focus = false;
+		/* Spinner choice aborted, show last saved value instead */
+		if (spinner->datatype == SPINTYPE_INTEGER) {
+			spinner->integer_data = spinner->last_saved_value;
+		} else if (spinner->datatype == SPINTYPE_STRING) {
+			spinner->strings.index = spinner->last_saved_value;
+		}
+
+		gfx_mono_spinctrl_draw(spinner, false);
+		return GFX_MONO_SPINCTRL_EVENT_BACK;
+
+	default:
+		/* Unknown key event */
+		return GFX_MONO_SPINCTRL_EVENT_IDLE;
+	}
+}
+
+/**
+ * \brief Update spincollection on screen depending on input
+ *
+ * This function returns \ref GFX_MONO_SPINCTRL_EVENT_FINISH if user has
+ * pressed the OK button. The spinner choices can then be extracted from the
+ * results array. If a spinner is of type SPINTYPE_STRING, the index of the
+ * progmem string will be stored in the results array, else the selected
+ * integer value will be stored.
+ * The choice from the first spinner added to the spincollection will be stored
+ * at index 0 in the results array, the second at index 1 and so on.
+ * If user has pressed the back button, \ref GFX_MONO_SPINCTRL_EVENT_BACK is
+ * returned, signalling that the application should be cancelled.
+ *
+ * \param[in] spinners       pointer to initialized
+ *                       gfx_mono_spinctrl_spincollection
+ * \param[in] keycode        keycode to process
+ * \param[in] results        array to store results from the spinners, must be of
+ *                       same length as number of spinners
+ *
+ * \retval GFX_MONO_SPINCTRL_EVENT_FINISH  user pressed ok button
+ * \retval GFX_MONO_SPINCTRL_EVENT_BACK    user cancelled
+ * \retval GFX_MONO_SPINCTRL_EVENT_IDLE    user is navigating in spincollection
+ */
+int16_t gfx_mono_spinctrl_spincollection_process_key(struct
+		gfx_mono_spinctrl_spincollection *spinners, uint8_t keycode,
+		int16_t results[])
+{
+	uint8_t i;
+	struct gfx_mono_spinctrl *iterator;
+
+	/* Make sure there are spinners in the collection, if not, cancel */
+	if (spinners->number_of_spinners == 0) {
+		return GFX_MONO_SPINCTRL_EVENT_BACK;
+	}
+
+	/* Store initial values in results array first time function is run */
+	if (spinners->init) {
+		iterator = spinners->collection;
+		for (i = 0; i < spinners->number_of_spinners; i++) {
+			if (iterator->datatype == SPINTYPE_INTEGER) {
+				results[i] = iterator->integer_data;
+			} else {
+				results[i] = iterator->strings.index;
+			}
+
+			iterator = iterator->next;
+		}
+		spinners->init = false;
+	}
+
+	/* Find current spinner selection */
+	iterator = spinners->collection;
+	if (spinners->current_selection != GFX_MONO_SPINCTRL_BUTTON) {
+		for (i = 0; i < spinners->current_selection; i++) {
+			iterator = iterator->next;
+		}
+	}
+
+	if (spinners->active_spinner) {
+		/* Process chosen spinner */
+		spinners->selection = gfx_mono_spinctrl_process_key(iterator,
+				keycode);
+		if (spinners->selection == GFX_MONO_SPINCTRL_EVENT_BACK) {
+			/* User has exited spinner without saving the result */
+			spinners->active_spinner = false;
+		} else if (spinners->selection !=
+				GFX_MONO_SPINCTRL_EVENT_IDLE) {
+			/* Value selected, store in array */
+			results[spinners->current_selection]
+				= spinners->selection;
+			/* Step out of spinner and into spincollection */
+			spinners->active_spinner = false;
+		}
+
+		return GFX_MONO_SPINCTRL_EVENT_IDLE;
+	} else {
+		switch (keycode) {
+		case GFX_MONO_SPINCTRL_KEYCODE_DOWN:
+			if (spinners->current_selection ==
+					GFX_MONO_SPINCTRL_BUTTON) {
+				spinners->current_selection = 0;
+				/* Delete indicator arrow in front of button */
+				gfx_mono_spinctrl_draw_button(true, false);
+				/* Draw indicator arrow in front of first
+				 * spinner */
+				gfx_mono_spinctrl_draw_indicator(iterator,
+						true);
+			} else if (spinners->current_selection <
+					spinners->number_of_spinners - 1) {
+				/* Delete indicator arrow */
+				gfx_mono_spinctrl_draw_indicator(iterator,
+						false);
+				spinners->current_selection++;
+				/* Draw indicator arrow in front of new spinner */
+				gfx_mono_spinctrl_draw_indicator(iterator->next,
+						true);
+			} else {
+				/* Delete indicator arrow */
+				gfx_mono_spinctrl_draw_indicator(iterator,
+						false);
+				spinners->current_selection
+					= GFX_MONO_SPINCTRL_BUTTON;
+				/* Draw indicator arrow in front of button */
+				gfx_mono_spinctrl_draw_button(true, true);
+			}
+
+			return GFX_MONO_SPINCTRL_EVENT_IDLE;
+
+		case GFX_MONO_SPINCTRL_KEYCODE_UP:
+			if (spinners->current_selection ==
+					GFX_MONO_SPINCTRL_BUTTON) {
+				/* Delete indicator arrow in front of button */
+				gfx_mono_spinctrl_draw_button(true, false);
+				spinners->current_selection
+					= spinners->number_of_spinners - 1;
+				/* Draw indicator arrow in front of new spinner */
+				gfx_mono_spinctrl_draw_indicator(
+						spinners->collection_last,
+						true);
+			} else if (spinners->current_selection > 0) {
+				/* Delete indicator arrow */
+				gfx_mono_spinctrl_draw_indicator(iterator,
+						false);
+				spinners->current_selection--;
+				/* Draw indicator arrow in front of new spinner */
+				gfx_mono_spinctrl_draw_indicator(iterator->prev,
+						true);
+			} else {
+				/* Delete indicator arrow */
+				gfx_mono_spinctrl_draw_indicator(iterator,
+						false);
+				spinners->current_selection
+					= GFX_MONO_SPINCTRL_BUTTON;
+				/* Draw indicator arrow in front of button */
+				gfx_mono_spinctrl_draw_button(true, true);
+			}
+
+			return GFX_MONO_SPINCTRL_EVENT_IDLE;
+
+		case GFX_MONO_SPINCTRL_KEYCODE_ENTER:
+			if (spinners->current_selection ==
+					GFX_MONO_SPINCTRL_BUTTON) {
+				/* Finished with all selections, return */
+				return GFX_MONO_SPINCTRL_EVENT_FINISH;
+			} else {
+				/* Spinner selected, send next keycode directly
+				 * to spinner */
+				gfx_mono_spinctrl_process_key(iterator,
+						keycode);
+				spinners->active_spinner = true;
+				return GFX_MONO_SPINCTRL_EVENT_IDLE;
+			}
+
+		case GFX_MONO_SPINCTRL_KEYCODE_BACK:
+			/* User pressed "back" key, */
+			return GFX_MONO_SPINCTRL_EVENT_BACK;
+
+		default:
+			/* Unknown key event */
+			return GFX_MONO_SPINCTRL_EVENT_IDLE;
+		}
+	}
+}
diff --git a/common2/services/gfx_mono/gfx_mono_spinctrl.h b/common2/services/gfx_mono/gfx_mono_spinctrl.h
new file mode 100644
index 00000000..96822233
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_spinctrl.h
@@ -0,0 +1,251 @@
+/**
+ * \file
+ *
+ * \brief Spin control widget
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef GFX_MONO_SPINCTRL_H
+#define GFX_MONO_SPINCTRL_H
+
+#include "gfx_mono.h"
+#include "conf_spinctrl.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_spinctrl Spinner widget for monochrome graphical displays
+ *
+ * This module provides a spinner widget system for monochrome graphical
+ * displays.
+ *
+ * There is support for having one single spinner on the screen, or a
+ * collection of spinners.
+ *
+ * Typical flow of an application using the spincollection system:
+ *
+ * 1) Define spinners.\n
+ * 2) Initialize each spinners with \ref gfx_mono_spinctrl_init.\n
+ * 3) Define a spincollection struct and initialize it with
+ * \ref gfx_mono_spinctrl_spincollection_init.\n
+ * 4) Add spinners to spincollection with
+ * \ref gfx_mono_spinctrl_spincollection_add_spinner.\n
+ * 5) Draw spincollection to screen with
+ * \ref gfx_mono_spinctrl_spincollection_show.\n
+ * 6) Define a result array to store the spinner choices.\n
+ * 7) Update spinners and result array with user input using function
+ * \ref gfx_mono_spinctrl_spincollection_process_key.\n
+ * 8) Interpret \ref gfx_mono_spinctrl_spincollection_process_key return
+ * value.\n
+ * 9) Go to 7.\n
+ *
+ * Typical flow of an application using a single spinner:
+ *
+ * 1) Define spinner.\n
+ * 2) Initialize the spinners with \ref gfx_mono_spinctrl_init with preferred y
+ * position on screen.\n
+ * 3) Draw spinner to screen with \ref gfx_mono_spinctrl_draw.\n
+ * 4) Update spinner with user input using function
+ * \ref gfx_mono_spinctrl_process_key.\n
+ * 5) Interpret \ref gfx_mono_spinctrl_process_key return value.\n
+ * 6) Go to 4.\n
+ *
+ * Before the spinners can be updated, you need input from the user. Methods
+ * for getting input is not part of the spinner widget.
+ *
+ * \note The spinners will be linked together when added to a spincollection,
+ * and can therefore not be used in two spincollections at the same time.
+ *
+ * As soon as input is received, inform the spincollection system or the single
+ * spinner using the \ref gfx_mono_spinctrl_spincollection_process_key function
+ * or the \ref gfx_mono_spinctrl_process_key function.
+ * These functions will then return a status code and act depending on the
+ * given keycode:
+ *
+ * GFX_MONO_SPINCTRL_KEYCODE_DOWN : Change selection to next spinner value or
+ * to next spinner or OK button in a spincollection.
+ *
+ * GFX_MONO_SPINCTRL_KEYCODE_UP : Change selection to previous spinner value
+ * or to previous spinner or OK button in a spincollection.
+ *
+ * GFX_MONO_SPINCTRL_KEYCODE_ENTER : Select spinner value or select spinner or
+ * OK button in a spincollection.
+ *
+ * GFX_MONO_SPINCTRL_KEYCODE_BACK : Deselect spinner or cancel spincollection
+ * application.
+ *
+ * The value of the keycodes used are defined in conf_spinctrl.h. These values
+ * can be changed if needed.
+ *
+ * The graphical indicators used to indicate spinner selections are defined in
+ * conf_spinctrl.h. These indicators can be changed if needed.
+ * @{
+ */
+
+/** Spinner idle event */
+#define GFX_MONO_SPINCTRL_EVENT_IDLE                0xFF
+/** Spinner back button pressed event */
+#define GFX_MONO_SPINCTRL_EVENT_BACK                0xFE
+/** Spinner ok button pressed event */
+#define GFX_MONO_SPINCTRL_EVENT_FINISH              0xFD
+
+/** OK button */
+#define GFX_MONO_SPINCTRL_BUTTON        0xFF
+
+/** Maximum number of spinner elements on display */
+#define GFX_MONO_SPINCTRL_ELEMENTS_PER_SCREEN \
+	((GFX_MONO_LCD_HEIGHT / SYSFONT_LINESPACING) - 1)
+
+/**
+ * Maximum numbers of spinner elements in a spincollection - limited to
+ * one screen.
+ */
+#define GFX_MONO_SPINCTRL_MAX_ELEMENTS_IN_SPINCOLLECTION \
+	GFX_MONO_SPINCTRL_ELEMENTS_PER_SCREEN
+
+/** Width of string spinner choices */
+#define GFX_MONO_SPINCTRL_STRING_SPINNER_WIDTH 9
+/** Width of integer spinner choices */
+#define GFX_MONO_SPINCTRL_INT_SPINNER_WIDTH    9
+
+/** Enum to specify what kind of data spinner should spin */
+typedef enum gfx_mono_spinctrl_type_enum {
+	SPINTYPE_STRING,
+	SPINTYPE_INTEGER
+} gfx_mono_spinctrl_type_t;
+
+/** String struct */
+struct gfx_mono_spinctrl_string {
+	/** Pointer to progmem strings to spin through
+	 * \note Each string must be shorter than
+	 * \ref  GFX_MONO_SPINCTRL_STRING_SPINNER_WIDTH characters.
+	 * If not, printing it to the screen will corrupt the spinner
+	 * appearance.
+	 */
+	PROGMEM_STRING_T *data;
+	/** Index in string array */
+	uint8_t index;
+};
+
+/** Spin control struct */
+struct gfx_mono_spinctrl {
+	/** Spinner title */
+	PROGMEM_STRING_T title;
+	/** Type of data to spin */
+	gfx_mono_spinctrl_type_t datatype;
+	/** Spinner data, depends on spinner datatype. */
+	union {
+		/** Spinner strings and index */
+		struct gfx_mono_spinctrl_string strings;
+		/** Spinner integer data */
+		int16_t integer_data;
+	};
+	/** Variable to store the last selected spinner value */
+	uint16_t last_saved_value;
+
+	/**
+	 * Lower limit for spinning, must be positive and fit in uin8_t for
+	 * spinner type SPINTYPE_STRING
+	 */
+	int16_t lower_limit;
+
+	/**
+	 * Upper limit for spinning, must be positive and fit in uin8_t for
+	 * spinner type SPINTYPE_STRING
+	 */
+	int16_t upper_limit;
+	/** Y coordinate for placement of spinner on screen */
+	gfx_coord_t y;
+	/** Boolean to tell if spinner is in focus or not */
+	bool in_focus;
+	/** Pointer to next spinner in a spincollection */
+	struct gfx_mono_spinctrl *next;
+	/** Pointer to previous spinner in a spincollection */
+	struct gfx_mono_spinctrl *prev;
+};
+
+/** Collection of spinners struct */
+struct gfx_mono_spinctrl_spincollection {
+	/** Pointer to the first spinner in the collection */
+	struct gfx_mono_spinctrl *collection;
+	/** Pointer to the last spinner in the collection */
+	struct gfx_mono_spinctrl *collection_last;
+	/** Number of spinners in collection */
+	uint8_t number_of_spinners;
+	/** Current spinner/button */
+	uint8_t current_selection;
+	/** Return value from selected spinner */
+	uint16_t selection;
+	/** Boolean to tell if input should be sent directly to a spinner */
+	bool active_spinner;
+	/** Boolean to initialize results array when starting key processing */
+	bool init;
+};
+
+void gfx_mono_spinctrl_init(struct gfx_mono_spinctrl *spinner,
+		gfx_mono_spinctrl_type_t datatype, PROGMEM_STRING_T title,
+		PROGMEM_STRING_T *data, int16_t lower_limit,
+		int16_t upper_limit,
+		gfx_coord_t y);
+void gfx_mono_spinctrl_draw(struct gfx_mono_spinctrl *spinner, bool redraw);
+void gfx_mono_spinctrl_spincollection_init(struct
+		gfx_mono_spinctrl_spincollection *collection);
+void gfx_mono_spinctrl_spincollection_add_spinner(struct gfx_mono_spinctrl
+		*spinner, struct gfx_mono_spinctrl_spincollection *spinners);
+void gfx_mono_spinctrl_spincollection_show(struct
+		gfx_mono_spinctrl_spincollection *spinners);
+int16_t gfx_mono_spinctrl_process_key(struct gfx_mono_spinctrl *spinner,
+		uint8_t keycode);
+
+int16_t gfx_mono_spinctrl_spincollection_process_key(struct
+gfx_mono_spinctrl_spincollection *spinners, uint8_t keycode,
+int16_t results[]);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_SPINCTRL_H */
diff --git a/common2/services/gfx_mono/gfx_mono_text.c b/common2/services/gfx_mono/gfx_mono_text.c
new file mode 100644
index 00000000..2fa02379
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_text.c
@@ -0,0 +1,425 @@
+/**
+ * \file
+ *
+ * \brief Font and text drawing routines
+ *
+ * Copyright (c) 2010-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include "stddef.h"
+#include "assert.h"
+
+#include "gfx_mono.h"
+#include "gfx_mono_text.h"
+#include <asf.h>
+
+#ifndef CONFIG_FONT_PIXELS_PER_BYTE
+# define CONFIG_FONT_PIXELS_PER_BYTE    8
+#endif
+
+#define EXTMEM_BUF_SIZE                 20
+
+#if defined(CONFIG_HUGEMEM) || defined(__DOXYGEN__)
+
+/**
+ * \internal
+ * \brief Helper function that draws a character from a font in hugemem
+ *        to the display
+ *
+ * This function will first calculate the start offset in the font character
+ * data before iterating over the specific character data.
+ *
+ * Only pixels in the character that should be enabled are done so, the caller
+ * is required to prepare the drawing area before printing a character to it.
+ * This is done by the gfx_mono_draw_string() and
+ * gfx_mono_draw_progmem_string() functions.
+ *
+ * \param[in] ch       Character to be drawn
+ * \param[in] x        X coordinate on screen.
+ * \param[in] y        Y coordinate on screen.
+ * \param[in] font     Font to draw character in
+ */
+static void gfx_mono_draw_char_hugemem(const char ch, const gfx_coord_t x,
+		const gfx_coord_t y, const struct font *font)
+{
+	uint8_t i;
+	uint8_t char_row_size;
+	uint8_t glyph_size;
+	uint16_t glyph_data_offset;
+	uint8_t char_buff[EXTMEM_BUF_SIZE];
+	uint8_t buffer_pos;
+	uint8_t rows_left;
+
+	/* Sanity check on parameters, assert if font is NULL. */
+	Assert(font != NULL);
+
+	gfx_coord_t inc_x = x;
+	gfx_coord_t inc_y = y;
+
+	char_row_size = font->width / CONFIG_FONT_PIXELS_PER_BYTE;
+	if (font->width % CONFIG_FONT_PIXELS_PER_BYTE) {
+		char_row_size++;
+	}
+
+	glyph_size = char_row_size * font->height;
+	glyph_data_offset = glyph_size * ((uint8_t)ch - font->first_char);
+	buffer_pos = EXTMEM_BUF_SIZE;
+	rows_left = font->height;
+
+	do {
+		static uint8_t glyph_byte = 0;
+		uint8_t pixelsToDraw = font->width;
+
+		for (i = 0; i < pixelsToDraw; i++) {
+			if (i % CONFIG_FONT_PIXELS_PER_BYTE == 0) {
+				/* Read another byte from hugemem */
+				if (buffer_pos >= EXTMEM_BUF_SIZE) {
+					hugemem_ptr_t source
+						= font->data.hugemem;
+					source = (hugemem_ptr_t)
+							((uint32_t)source +
+							glyph_data_offset);
+
+					hugemem_read_block(char_buff, source,
+							EXTMEM_BUF_SIZE);
+
+					glyph_data_offset += EXTMEM_BUF_SIZE;
+					buffer_pos = 0;
+				}
+
+				glyph_byte = char_buff[buffer_pos];
+				buffer_pos++;
+			}
+
+			/* Draw bit of glyph to screen */
+			if ((glyph_byte & 0x80)) {
+				gfx_mono_draw_pixel(inc_x, inc_y,
+						GFX_PIXEL_SET);
+			}
+
+			inc_x += 1;
+			glyph_byte <<= 1;
+		}
+
+		inc_y += 1;
+		inc_x = x;
+	} while (--rows_left > 0);
+}
+
+#endif
+
+/**
+ * \internal
+ * \brief Helper function that draws a character from a font in progmem
+ *        to the display
+ *
+ * This function will first calculate the start offset in the font character
+ * data before iterating over the specific character data.
+ *
+ * Only pixels in the character that should be enabled are done so, the caller
+ * is required to prepare the drawing area before printing a character to it.
+ * This is done by the gfx_mono_draw_string() and
+ * gfx_mono_draw_progmem_string() functions.
+ *
+ * \param[in] ch       Character to be drawn
+ * \param[in] x        X coordinate on screen.
+ * \param[in] y        Y coordinate on screen.
+ * \param[in] font     Font to draw character in
+ */
+static void gfx_mono_draw_char_progmem(const char ch, const gfx_coord_t x,
+		const gfx_coord_t y, const struct font *font)
+{
+	uint8_t PROGMEM_PTR_T glyph_data;
+	uint16_t glyph_data_offset;
+	uint8_t char_row_size;
+	uint8_t rows_left;
+	uint8_t i;
+
+	/* Sanity check on parameters, assert if font is NULL. */
+	Assert(font != NULL);
+
+	gfx_coord_t inc_x = x;
+	gfx_coord_t inc_y = y;
+
+	char_row_size = font->width / CONFIG_FONT_PIXELS_PER_BYTE;
+	if (font->width % CONFIG_FONT_PIXELS_PER_BYTE) {
+		char_row_size++;
+	}
+
+	glyph_data_offset = char_row_size * font->height *
+			((uint8_t)ch - font->first_char);
+	glyph_data = font->data.progmem + glyph_data_offset;
+	rows_left = font->height;
+
+	do {
+		uint8_t glyph_byte = 0;
+		uint8_t pixelsToDraw = font->width;
+
+		for (i = 0; i < pixelsToDraw; i++) {
+			if (i % CONFIG_FONT_PIXELS_PER_BYTE == 0) {
+				glyph_byte = PROGMEM_READ_BYTE(glyph_data);
+				glyph_data++;
+			}
+
+			if ((glyph_byte & 0x80)) {
+				gfx_mono_draw_pixel(inc_x, inc_y,
+						GFX_PIXEL_SET);
+			}
+
+			inc_x += 1;
+			glyph_byte <<= 1;
+		}
+
+		inc_y += 1;
+		inc_x = x;
+		rows_left--;
+	} while (rows_left > 0);
+}
+
+/**
+ * \brief Draws a character to the display
+ *
+ * \param[in] c        Character to be drawn
+ * \param[in] x        X coordinate on screen.
+ * \param[in] y        Y coordinate on screen.
+ * \param[in] font     Font to draw character in
+ */
+void gfx_mono_draw_char(const char c, const gfx_coord_t x, const gfx_coord_t y,
+		const struct font *font)
+{
+	gfx_mono_draw_filled_rect(x, y, font->width, font->height,
+			GFX_PIXEL_CLR);
+
+	switch (font->type) {
+	case FONT_LOC_PROGMEM:
+		gfx_mono_draw_char_progmem(c, x, y, font);
+		break;
+
+#ifdef CONFIG_HUGEMEM
+	case FONT_LOC_HUGEMEM:
+		gfx_mono_draw_char_hugemem(c, x, y, font);
+		break;
+
+#endif
+	default:
+		/* Unsupported mode, call assert */
+		Assert(false);
+		break;
+	}
+}
+
+/**
+ * \brief Draws a string to the display
+ *
+ * This function will draw a string located in memory to the display.
+ *
+ * \param[in] str       Pointer to string
+ * \param[in] x         X coordinate on screen.
+ * \param[in] y         Y coordinate on screen.
+ * \param[in] font      Font to draw string in
+ */
+void gfx_mono_draw_string(const char *str, gfx_coord_t x, gfx_coord_t y,
+		const struct font *font)
+{
+	/* Save X in order to know where to return to on CR. */
+	const gfx_coord_t start_of_string_position_x = x;
+
+	/* Sanity check on parameters, assert if str or font is NULL. */
+	Assert(str != NULL);
+	Assert(font != NULL);
+
+	/* Draw characters until trailing null byte */
+	do {
+		/* Handle '\n' as newline, draw normal characters. */
+		if (*str == '\n') {
+			x = start_of_string_position_x;
+			y += font->height + 1;
+		} else if (*str == '\r') {
+			/* Skip '\r' characters. */
+		} else {
+			gfx_mono_draw_char(*str, x, y, font);
+			x += font->width;
+		}
+	} while (*(++str));
+}
+
+/**
+ * \brief Draws a string located in program memory to the display
+ *
+ * This function will draw a string located in program memory to the display,
+ * this differs from gfx_mono_draw_string() by using constant string data from
+ * the program memory instead of string data in RAM.
+ *
+ * Using program memory for constant strings will reduce the applications need
+ * for RAM, and thus lower the overall size footprint.
+ *
+ * \param[in] str       Pointer to string located in program memory
+ * \param[in] x         X coordinate on screen.
+ * \param[in] y         Y coordinate on screen.
+ * \param[in] font      Font to draw string in
+ */
+void gfx_mono_draw_progmem_string(char PROGMEM_PTR_T str, gfx_coord_t x,
+		gfx_coord_t y, const struct font *font)
+{
+	char temp_char;
+
+	/* Sanity check on parameters, assert if str or font is NULL. */
+	Assert(str != NULL);
+	Assert(font != NULL);
+
+	/* Save X in order to know where to return to on CR. */
+	const gfx_coord_t start_of_string_position_x = x;
+
+	/* Draw characters until trailing null byte */
+	temp_char = PROGMEM_READ_BYTE((uint8_t PROGMEM_PTR_T)str);
+
+	while (temp_char) {
+		/* Handle '\n' as newline, draw normal characters. */
+		if (temp_char == '\n') {
+			x = start_of_string_position_x;
+			y += font->height + 1;
+		} else if (temp_char == '\r') {
+			/* Skip '\r' characters. */
+		} else {
+			gfx_mono_draw_char(temp_char, x, y, font);
+			x += font->width;
+		}
+
+		temp_char = PROGMEM_READ_BYTE((uint8_t PROGMEM_PTR_T)(++str));
+	}
+}
+
+/**
+ * \brief Computes the bounding box of a string
+ *
+ * \note If string is empty the returned width will be 1 pixel and the height
+ * equal to the font height.
+ *
+ * \param[in] str      String to calculate bounding box for
+ * \param[in] font     Font used
+ * \param[in] width    Pointer to width result
+ * \param[in] height   Pointer to height result
+ */
+void gfx_mono_get_string_bounding_box(const char *str, const struct font *font,
+		gfx_coord_t *width, gfx_coord_t *height)
+{
+	gfx_coord_t font_width = font->width;
+	gfx_coord_t font_height = font->height;
+
+	gfx_coord_t max_width = 1;
+	gfx_coord_t max_height = font_height;
+	gfx_coord_t x = 0;
+
+	/* Sanity check on parameters, assert if str or font is NULL. */
+	Assert(str != NULL);
+	Assert(font != NULL);
+
+	/* Handle each character until trailing null byte */
+	do {
+		/* Handle '\n' as newline, draw normal characters. */
+		if (*str == '\n') {
+			x = 0;
+			max_height += font_height;
+		} else if (*str == '\r') {
+			/* Skip '\r' characters. */
+		} else {
+			x += font_width;
+			if (x > max_width) {
+				max_width = x;
+			}
+		}
+	} while (*(++str));
+
+	/* Return values through references */
+	*width = max_width;
+	*height = max_height;
+}
+
+/**
+ * \brief Computes the bounding box of a string located in program memory
+ *
+ * \note If string is empty the returned width will be 1 pixel and the height
+ * equal to the font height.
+ *
+ * \param[in] str      String in program memory to calculate bounding box for
+ * \param[in] font     Font used
+ * \param[in] width    Pointer to width result
+ * \param[in] height   Pointer to height result
+ */
+void gfx_mono_get_progmem_string_bounding_box(char PROGMEM_PTR_T str,
+		const struct font *font, gfx_coord_t *width,
+		gfx_coord_t *height)
+{
+	gfx_coord_t font_width = font->width;
+	gfx_coord_t font_height = font->height;
+
+	char temp_char;
+	gfx_coord_t max_width = 1;
+	gfx_coord_t max_height = font_height;
+	gfx_coord_t x = 0;
+
+	/* Sanity check on parameters, assert if str or font is NULL. */
+	Assert(str != NULL);
+	Assert(font != NULL);
+
+	/* Handle each character until trailing null byte */
+	temp_char = PROGMEM_READ_BYTE((uint8_t PROGMEM_PTR_T)str);
+
+	while (temp_char) {
+		/* Handle '\n' as newline, draw normal characters. */
+		if (temp_char == '\n') {
+			x = 0;
+			max_height += font_height;
+		} else if (*str == '\r') {
+			/* Skip '\r' characters. */
+		} else {
+			x += font_width;
+			if (x > max_width) {
+				max_width = x;
+			}
+		}
+
+		temp_char = PROGMEM_READ_BYTE((uint8_t PROGMEM_PTR_T)(++str));
+	}
+
+	/* Return values through references */
+	*width = max_width;
+	*height = max_height;
+}
diff --git a/common2/services/gfx_mono/gfx_mono_text.h b/common2/services/gfx_mono/gfx_mono_text.h
new file mode 100644
index 00000000..9884397a
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_text.h
@@ -0,0 +1,177 @@
+/**
+ * \file
+ *
+ * \brief Monochrome graphic library API header file
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef GFX_MONO_TEXT_H_INCLUDED
+#define GFX_MONO_TEXT_H_INCLUDED
+
+#include <stdint.h>
+
+#include "compiler.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_font GFX Mono Font Library
+ * This modules provides functionality for outputting a monochrome font
+ * to a display.
+ *
+ * \section asfdoc_common2_gfx_mono_font_api_overview API Overview
+ * @{
+ */
+
+/**
+ * \brief Valid storage locations for font data
+ *
+ * Add support for fonts in regular ram
+ */
+enum font_data_type {
+	/** Font data stored in program/flash memory. */
+	FONT_LOC_PROGMEM,
+};
+
+/** Storage structure for font meta data. */
+struct font {
+	/** Type of storage used for binary font data. See \ref font_data_type. */
+	enum font_data_type type;
+	union {
+		/**
+		 * Pointer to where the binary font data is stored. This
+		 * variable is accessed either through hugemem or progmem
+		 * depending on the value of \a type.
+		 */
+#ifdef CONFIG_HAVE_HUGEMEM
+		hugemem_ptr_t hugemem;
+#endif
+		uint8_t PROGMEM_PTR_T progmem;
+	} data;
+	/** Width of one font character, in pixels. */
+	uint8_t width;
+	/** Height of one font character, in pixels. */
+	uint8_t height;
+	/** ASCII value of first character in font set. */
+	uint8_t first_char;
+	/** ASCII value of last character in the set. */
+	uint8_t last_char;
+};
+
+/** \name Strings and characters located in RAM */
+/** @{ */
+void gfx_mono_draw_char(const char c, const gfx_coord_t x, const gfx_coord_t y,
+		const struct font *font);
+
+void gfx_mono_draw_string(const char *str, const gfx_coord_t x,
+		const gfx_coord_t y, const struct font *font);
+
+void gfx_mono_get_string_bounding_box(char const *str, const struct font *font,
+		gfx_coord_t *width, gfx_coord_t *height);
+
+/** @} */
+
+/** \name Strings located in flash */
+/** @{ */
+void gfx_mono_draw_progmem_string(char PROGMEM_PTR_T str, gfx_coord_t x,
+		gfx_coord_t y, const struct font *font);
+
+void gfx_mono_get_progmem_string_bounding_box(char PROGMEM_PTR_T str,
+		const struct font *font, gfx_coord_t *width,
+		gfx_coord_t *height);
+
+/** @} */
+
+/** @} */
+
+/**
+ * \page asfdoc_common2_gfx_mono_font_quickstart Quick Start Guide for the mono font service
+ *
+ * This is the quick start guide for the \ref asfdoc_common2_gfx_mono_font
+ * with step-by-step instructions on how to configure and use it for a specific
+ * use case.
+ *
+ * \section asfdoc_common2_gfx_mono_font_quickstart_basic Basic usage of the graphics service
+ * This use case will demonstrate initializing the mono graphics service and
+ * then draw a "Hello world!" sting on the display.
+ *
+ * \section asfdoc_common2_gfx_mono_font_quickstart_depend Dependencies
+ * In order to use this quick start, the following dependencies are needed:
+ * - \ref asfdoc_samd20_system_group
+ * - \ref asfdoc_common2_gfx_mono_font
+ * - \ref conf_sysfont.h Containing the actual font.
+ *
+ * \section asfdoc_common2_gfx_mono_font_basic_usage Usage steps
+ * \subsection gfx_mono_font_basic_usage_code Example code
+ * Add to, e.g., the main function in the application C-file:
+ * \code
+	     system_init();
+
+	     gfx_mono_init();
+
+	     gfx_mono_draw_string("Hello world!",0, 0, &sysfont);
+
+	     while (1) {
+
+	     }
+\endcode
+ *
+ * \subsection asfdoc_common2_gfx_mono_font_basic_usage_workflow Workflow
+ * -# Initialize system:
+ *  - \code system_init(); \endcode
+ * -# Initialize monochrome graphics service
+ *  - \code gfx_mono_init(); \endcode
+ *  - \note This will call the init function for the low level display
+ *          controller driver and intialize the screen to a cleared background.
+ * -# Draw a string on the screen starting at pixel (0,0)
+ * -  \code gfx_mono_draw_string("Hello world!",0, 0, &sysfont); \endcode
+ * -  \note This uses \ref conf_sysfont.h where sysfont is defines to give the font
+ * to be used on the screen.
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_TEXT_H_INCLUDED */
diff --git a/common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c b/common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c
new file mode 100644
index 00000000..bf049033
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.c
@@ -0,0 +1,372 @@
+/**
+ * \file
+ *
+ * \brief Haven Display UG 2832HSWEG04 display glue code for display controller
+ *
+ * Copyright (c) 2013-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include "gfx_mono_ug_2832hsweg04.h"
+
+/* If we are using a serial interface without readback, use framebuffer */
+
+#ifdef CONFIG_SSD1306_FRAMEBUFFER
+static uint8_t framebuffer[GFX_MONO_LCD_FRAMEBUFFER_SIZE];
+#endif
+
+/**
+ * \brief Initialize SSD1306 controller and LCD display.
+ * It will also write the graphic controller RAM to all zeroes.
+ *
+ * \note This function will clear the contents of the display.
+ */
+void gfx_mono_ssd1306_init(void)
+{
+	uint8_t page;
+	uint8_t column;
+
+#ifdef CONFIG_SSD1306_FRAMEBUFFER
+	gfx_mono_set_framebuffer(framebuffer);
+#endif
+
+	/* Initialize the low-level display controller. */
+	ssd1306_init();
+
+	/* Set display to output data from line 0 */
+	ssd1306_set_display_start_line_address(0);
+
+	/* Clear the contents of the display.
+	 * If using a framebuffer (SPI interface) it will both clear the
+	 * controller memory and the framebuffer.
+	 */
+	for (page = 0; page < GFX_MONO_LCD_PAGES; page++) {
+		for (column = 0; column < GFX_MONO_LCD_WIDTH; column++) {
+			gfx_mono_ssd1306_put_byte(page, column, 0x00, true);
+		}
+	}
+}
+
+#ifdef CONFIG_SSD1306_FRAMEBUFFER
+/**
+ * \brief Put framebuffer to LCD controller
+ *
+ * This function will output the complete framebuffer from RAM to the
+ * LCD controller.
+ *
+ * \note This is done automatically if using the graphic primitives. Only
+ * needed if you are manipulating the framebuffer directly in your code.
+ */
+void gfx_mono_ssd1306_put_framebuffer(void)
+{
+	uint8_t page;
+
+	for (page = 0; page < GFX_MONO_LCD_PAGES; page++) {
+		ssd1306_set_page_address(page);
+		ssd1306_set_column_address(0);
+		gfx_mono_ssd1306_put_page(framebuffer
+				+ (page * GFX_MONO_LCD_WIDTH), page, 0,
+				GFX_MONO_LCD_WIDTH);
+	}
+}
+#endif
+
+/**
+ * \brief Draw pixel to screen
+ *
+ * \param[in] x         X coordinate of the pixel
+ * \param[in] y         Y coordinate of the pixel
+ * \param[in] color     Pixel operation
+ *
+ * The following will set the pixel at x=10,y=10:
+ * \code
+	gfx_mono_ssd1306_draw_pixel(10, 10, GFX_PIXEL_SET);
+\endcode
+ * The following example will clear the pixel at x=10,y=10:
+ * \code
+	gfx_mono_ssd1306_draw_pixel(10, 10, GFX_PIXEL_CLR);
+\endcode
+ * And the following will toggle the pixel at x=10,y=10:
+ * \code
+	gfx_mono_ssd1306_draw_pixel(10, 10, GFX_PIXEL_XOR);
+\endcode
+ */
+void gfx_mono_ssd1306_draw_pixel(gfx_coord_t x, gfx_coord_t y,
+		gfx_coord_t color)
+{
+	uint8_t page;
+	uint8_t pixel_mask;
+	uint8_t pixel_value;
+
+	/* Discard pixels drawn outside the screen */
+	if ((x > GFX_MONO_LCD_WIDTH - 1) || (y > GFX_MONO_LCD_HEIGHT - 1)) {
+		return;
+	}
+
+	page = y / GFX_MONO_LCD_PIXELS_PER_BYTE;
+	pixel_mask = (1 << (y - (page * 8)));
+
+	/*
+	 * Read the page containing the pixel in interest, then perform the
+	 * requested action on this pixel before writing the page back to the
+	 * display.
+	 */
+	pixel_value = gfx_mono_get_byte(page, x);
+
+	switch (color) {
+	case GFX_PIXEL_SET:
+		pixel_value |= pixel_mask;
+		break;
+
+	case GFX_PIXEL_CLR:
+		pixel_value &= ~pixel_mask;
+		break;
+
+	case GFX_PIXEL_XOR:
+		pixel_value ^= pixel_mask;
+		break;
+
+	default:
+		break;
+	}
+
+	gfx_mono_put_byte(page, x, pixel_value);
+}
+
+/**
+ * \brief Get the pixel value at x,y
+ *
+ * \param[in] x      X coordinate of pixel
+ * \param[in] y      Y coordinate of pixel
+ * \return Non zero value if pixel is set.
+ *
+ * The following example will read the pixel value from x=10,y=10:
+ * \code
+	pixelval = gfx_mono_ssd1306_get_pixel(10,10);
+\endcode
+ */
+uint8_t gfx_mono_ssd1306_get_pixel(gfx_coord_t x, gfx_coord_t y)
+{
+	uint8_t page;
+	uint8_t pixel_mask;
+
+	if ((x > GFX_MONO_LCD_WIDTH - 1) || (y > GFX_MONO_LCD_HEIGHT - 1)) {
+		return 0;
+	}
+
+	page = y / GFX_MONO_LCD_PIXELS_PER_BYTE;
+	pixel_mask = (1 << (y - (page * 8)));
+
+	return gfx_mono_get_byte(page, x) & pixel_mask;
+}
+
+/**
+ * \brief Put a page from RAM to display controller.
+ *
+ * If the controller is accessed by the SPI interface, we can not read
+ * back data from the LCD controller RAM. Because of this all data that is
+ * written to the LCD controller in this mode is also written to a framebuffer
+ * in MCU RAM.
+ *
+ * \param[in] data Pointer to data to be written
+ * \param[in] page Page address
+ * \param[in] column Offset into page (x coordinate)
+ * \param[in] width Number of bytes to be written.
+ *
+ * The following example will write 32 bytes from data_buf to the page 0,
+ * column 10. This will place data_buf in the rectangle x1=10,y1=0,x2=42,y2=8
+ * (10 pixels from the upper left corner of the screen):
+ * \code
+	gfx_mono_ssd1306_put_page(data_buf, 0, 10, 32);
+\endcode
+ */
+void gfx_mono_ssd1306_put_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t column, gfx_coord_t width)
+{
+#ifdef CONFIG_SSD1306_FRAMEBUFFER
+	gfx_mono_framebuffer_put_page(data, page, column, width);
+#endif
+	ssd1306_set_page_address(page);
+	ssd1306_set_column_address(column);
+
+	do {
+		ssd1306_write_data(*data++);
+	} while (--width);
+}
+
+/**
+ * \brief Read a page from the LCD controller
+ *
+ * If the LCD controller is accessed by the SPI interface we cannot read
+ * data directly from the controller. In that case we will read the data from
+ * the local framebuffer instead.
+ *
+ * \param[in] data   Pointer where to store the read data
+ * \param[in] page   Page address
+ * \param[in] column Offset into page (x coordinate)
+ * \param[in] width  Number of bytes to be read
+ *
+ * The following example will read back the first 128 bytes (first page) from
+ * the display memory:
+ * \code
+	gfx_mono_ssd1306_get_page(read_buffer, 0, 0, 128);
+\endcode
+ */
+void gfx_mono_ssd1306_get_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t column, gfx_coord_t width)
+{
+#ifdef CONFIG_SSD1306_FRAMEBUFFER
+	gfx_mono_framebuffer_get_page(data, page, column, width);
+#else
+	ssd1306_set_page_address(page);
+	ssd1306_set_column_address(column);
+
+	do {
+		*data++ = ssd1306_read_data();
+	} while (--width);
+#endif
+}
+
+/**
+ * \brief Put a byte to the display controller RAM
+ *
+ * If the LCD controller is accessed by the SPI interface we will also put the
+ * data to the local framebuffer.
+ *
+ * \param[in] page Page address
+ * \param[in] column Page offset (x coordinate)
+ * \param[in] data Data to be written
+ * \param[in] force Forces the write
+ *
+ * This example will put the value 0xFF to the first byte in the display memory
+ * setting a 8 pixel high column of pixels in the upper left corner of the
+ * display.
+ * \code
+	gfx_mono_ssd1306_put_byte(0, 0, 0xFF, false);
+\endcode
+  */
+ void gfx_mono_ssd1306_put_byte(gfx_coord_t page, gfx_coord_t column,
+		uint8_t data, bool force)
+{
+#ifdef CONFIG_SSD1306_FRAMEBUFFER
+	if (!force && data == gfx_mono_framebuffer_get_byte(page, column)) {
+		return;
+	}
+	gfx_mono_framebuffer_put_byte(page, column, data);
+#endif
+
+	ssd1306_set_page_address(page);
+	ssd1306_set_column_address(column);
+
+	ssd1306_write_data(data);
+}
+
+/**
+ * \brief Get a byte from the display controller RAM
+ *
+ * If the LCD controller is accessed by the SPI interface we cannot read the
+ * data. In this case return the data from the local framebuffer instead.
+ *
+ * \param[in] page Page address
+ * \param[in] column Page offset (x coordinate)
+ * \return data from LCD controller or framebuffer.
+ *
+ * The following code will read the first byte from the display memory or the
+ * local framebuffer if direct read is not possible. The data represents the
+ * pixels from x = 0 and y = 0 to y = 7.
+ * \code
+	data = gfx_mono_ssd1306_get_byte(0, 0);
+\endcode
+ */
+uint8_t gfx_mono_ssd1306_get_byte(gfx_coord_t page, gfx_coord_t column)
+{
+#ifdef CONFIG_SSD1306_FRAMEBUFFER
+	return gfx_mono_framebuffer_get_byte(page, column);
+
+#else
+	ssd1306_set_page_address(page);
+	ssd1306_set_column_address(column);
+
+	return ssd1306_read_data();
+
+#endif
+}
+
+/**
+ * \brief Read/Modify/Write a byte on the display controller
+ *
+ * This function will read the byte from the display controller (or the
+ * framebuffer if we cannot read directly from the controller) and
+ * do a mask operation on the byte according to the pixel operation selected
+ * by the color argument and the pixel mask provided.
+ *
+ * \param[in] page Page address
+ * \param[in] column Page offset (x coordinate)
+ * \param[in] pixel_mask Mask for pixel operation
+ * \param[in] color Pixel operation
+ *
+ * A small example that will XOR the first byte of display memory with 0xAA
+ * \code
+	gfx_mono_ssd1306_mask_byte(0,0,0xAA,GFX_PIXEL_XOR);
+\endcode
+ */
+void gfx_mono_ssd1306_mask_byte(gfx_coord_t page, gfx_coord_t column,
+		gfx_mono_color_t pixel_mask, gfx_mono_color_t color)
+{
+	gfx_mono_color_t temp = gfx_mono_get_byte(page, column);
+
+	switch (color) {
+	case GFX_PIXEL_SET:
+		temp |= pixel_mask;
+		break;
+
+	case GFX_PIXEL_CLR:
+		temp &= ~pixel_mask;
+		break;
+
+	case GFX_PIXEL_XOR:
+		temp ^= pixel_mask;
+		break;
+
+	default:
+		break;
+	}
+
+	gfx_mono_put_byte(page, column, temp);
+}
diff --git a/common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.h b/common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.h
new file mode 100644
index 00000000..5cb0ddd8
--- /dev/null
+++ b/common2/services/gfx_mono/gfx_mono_ug_2832hsweg04.h
@@ -0,0 +1,168 @@
+/**
+ * \file
+ *
+ * \brief Haven Display UG 2832HSWEG04 display glue code for display controller
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef GFX_MONO_2832HSWEG04_H
+#define GFX_MONO_2832HSWEG04_H
+#include "compiler.h"
+#include "ssd1306.h"
+
+#include "gfx_mono.h"
+#include "gfx_mono_framebuffer.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono
+ * \defgroup asfdoc_common2_gfx_mono_2832hsweg04_group 2832HSWEG04 graphic library abstraction
+ *
+ * This module is an abstraction layer between the graphic library and the
+ * 2832HSWEG04 monochrome LCD display connected to a SSD1306 LCD controller.
+ *
+ * As the controller does not provide any hardware accelerated graphic, all the
+ * graphic primitives are provided by the \ref asfdoc_common2_gfx_mono_generic_group service.
+ *
+ * \note Do not call the gfx_mono_ssd1306_ functions directly. use the gfx_mono
+ * names that are defined in this header and documented in \ref asfdoc_common2_gfx_mono .
+ * Ie. gfx_mono_draw_pixel() should be used, not gfx_mono_ssd1306_draw_pixel()
+ * @{
+ */
+
+#define GFX_MONO_LCD_WIDTH              128
+#ifndef GFX_MONO_LCD_HEIGHT
+#       define GFX_MONO_LCD_HEIGHT             32
+#endif
+#define GFX_MONO_LCD_PIXELS_PER_BYTE    8
+#define GFX_MONO_LCD_PAGES              (GFX_MONO_LCD_HEIGHT / \
+	GFX_MONO_LCD_PIXELS_PER_BYTE)
+#define GFX_MONO_LCD_FRAMEBUFFER_SIZE   ((GFX_MONO_LCD_WIDTH * \
+	GFX_MONO_LCD_HEIGHT) / GFX_MONO_LCD_PIXELS_PER_BYTE)
+
+#define gfx_mono_draw_horizontal_line(x, y, length, color) \
+	gfx_mono_generic_draw_horizontal_line(x, y, length, color)
+
+#define gfx_mono_draw_vertical_line(x, y, length, color) \
+	gfx_mono_generic_draw_vertical_line(x, y, length, color)
+
+#define gfx_mono_draw_line(x1, y1, x2, y2, color) \
+	gfx_mono_generic_draw_line(x1, y1, x2, y2, color)
+
+#define gfx_mono_draw_rect(x, y, width, height, color) \
+	gfx_mono_generic_draw_rect(x, y, width, height, color)
+
+#define gfx_mono_draw_filled_rect(x, y, width, height, color) \
+	gfx_mono_generic_draw_filled_rect(x, y, width, height, \
+		color)
+
+#define gfx_mono_draw_circle(x, y, radius, color, octant_mask) \
+	gfx_mono_generic_draw_circle(x, y, radius, color, \
+		octant_mask)
+
+#define gfx_mono_draw_filled_circle(x, y, radius, color, quadrant_mask)	\
+	gfx_mono_generic_draw_filled_circle(x, y, radius, \
+		color, quadrant_mask)
+
+#define gfx_mono_put_bitmap(bitmap, x, y) \
+	gfx_mono_generic_put_bitmap(bitmap, x, y)
+
+#define gfx_mono_draw_pixel(x, y, color) \
+	gfx_mono_ssd1306_draw_pixel(x, y, color)
+
+#define gfx_mono_get_pixel(x, y) \
+	gfx_mono_ssd1306_get_pixel(x, y)
+
+#define gfx_mono_init()	\
+	gfx_mono_ssd1306_init()
+
+#define gfx_mono_put_page(data, page, column, width) \
+	gfx_mono_ssd1306_put_page(data, page, column, width)
+
+#define gfx_mono_get_page(data, page, column, width) \
+	gfx_mono_ssd1306_get_page(data, page, column, width)
+
+#define gfx_mono_put_byte(page, column, data) \
+	gfx_mono_ssd1306_put_byte(page, column, data, false)
+
+#define gfx_mono_get_byte(page, column)	\
+	gfx_mono_ssd1306_get_byte(page, column)
+
+#define gfx_mono_mask_byte(page, column, pixel_mask, color) \
+	gfx_mono_ssd1306_mask_byte(page, column, pixel_mask, color)
+
+#define gfx_mono_put_framebuffer() \
+	gfx_mono_ssd1306_put_framebuffer()
+
+void gfx_mono_ssd1306_put_framebuffer(void);
+
+void gfx_mono_ssd1306_put_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t page_offset, gfx_coord_t width);
+
+void gfx_mono_ssd1306_get_page(gfx_mono_color_t *data, gfx_coord_t page,
+		gfx_coord_t page_offset, gfx_coord_t width);
+
+void gfx_mono_ssd1306_init(void);
+
+void gfx_mono_ssd1306_draw_pixel(gfx_coord_t x, gfx_coord_t y,
+		gfx_mono_color_t color);
+
+uint8_t gfx_mono_ssd1306_get_pixel(gfx_coord_t x, gfx_coord_t y);
+
+void gfx_mono_ssd1306_put_byte(gfx_coord_t page, gfx_coord_t column,
+		uint8_t data, bool force);
+
+uint8_t gfx_mono_ssd1306_get_byte(gfx_coord_t page, gfx_coord_t column);
+
+void gfx_mono_ssd1306_mask_byte(gfx_coord_t page, gfx_coord_t column,
+		gfx_mono_color_t pixel_mask, gfx_mono_color_t color);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GFX_MONO_2832HSWEG04_H */
diff --git a/common2/services/gfx_mono/module_config/conf_menu.h b/common2/services/gfx_mono/module_config/conf_menu.h
new file mode 100644
index 00000000..5a765a77
--- /dev/null
+++ b/common2/services/gfx_mono/module_config/conf_menu.h
@@ -0,0 +1,72 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for menu system
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_MENU_H_INCLUDED
+#define DEFAULT_MENU_H_INCLUDED
+
+//! \name Indicator icon definitions
+//@{
+//! Bitmap data, row by row, MSB is leftmost pixel, one byte per row.
+#define GFX_MONO_MENU_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height in pixels of indicator icon
+#define GFX_MONO_MENU_INDICATOR_HEIGHT 8
+//! Width in pixels of indicator icon
+#define GFX_MONO_MENU_INDICATOR_WIDTH  4
+//@}
+
+//! \name Keyboard codes
+//@{
+//! Down
+#define GFX_MONO_MENU_KEYCODE_DOWN  40
+//! Up
+#define GFX_MONO_MENU_KEYCODE_UP    38
+//! Back/exit
+#define GFX_MONO_MENU_KEYCODE_BACK  8
+//! Enter/select
+#define GFX_MONO_MENU_KEYCODE_ENTER 13
+//@}
+
+#endif /* DEFAULT_MENU_H_INCLUDED */
diff --git a/common2/services/gfx_mono/module_config/conf_spinctrl.h b/common2/services/gfx_mono/module_config/conf_spinctrl.h
new file mode 100644
index 00000000..2090b6a1
--- /dev/null
+++ b/common2/services/gfx_mono/module_config/conf_spinctrl.h
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for gfx_mono_spinctrl
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+#define DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED
+
+//! Spinner value indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_BITMAP 0x18, 0x3C, 0x7E, 0xFF
+//! Height of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_HEIGHT 8
+//! Width of spinner value indicator
+#define GFX_MONO_SPINCTRL_SPIN_INDICATOR_WIDTH  4
+
+//! Spinner indicator
+/* Bitmap data, row by row, MSB is leftmost pixel, one byte per row. */
+#define GFX_MONO_SPINCTRL_INDICATOR_BITMAP 0xFF, 0x7E, 0x3C, 0x18
+//! Height of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_HEIGHT 8
+//! Width of spinner indicator
+#define GFX_MONO_SPINCTRL_INDICATOR_WIDTH  4
+
+//! Keyboard code down
+#define GFX_MONO_SPINCTRL_KEYCODE_DOWN  40
+//! Keyboard code up
+#define GFX_MONO_SPINCTRL_KEYCODE_UP    38
+//! Keyboard code back
+#define GFX_MONO_SPINCTRL_KEYCODE_BACK  8
+//! Keyboard code enter
+#define GFX_MONO_SPINCTRL_KEYCODE_ENTER 13
+
+#endif /* DEFAULT_GFX_MONO_SPINCTRL_H_INCLUDED */
diff --git a/common2/services/gfx_mono/module_config/conf_sysfont.h b/common2/services/gfx_mono/module_config/conf_sysfont.h
new file mode 100644
index 00000000..05daa73b
--- /dev/null
+++ b/common2/services/gfx_mono/module_config/conf_sysfont.h
@@ -0,0 +1,1170 @@
+/**
+ * \file
+ *
+ * \brief Default configurations for sysfont
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef CONF_SYSFONT_H
+#define CONF_SYSFONT_H
+
+/**
+ * \weakgroup gfx_mono_sysfont
+ * @{
+ */
+
+#include <stdint.h>
+
+/* #define USE_FONT_BPMONO_10x16 */
+/* #define USE_FONT_BPMONO_10x14 */
+/* #define USE_FONT_MONO_MMM_10x12 */
+#define USE_FONT_BASIC_6x7
+
+#if defined(USE_FONT_BPMONO_10x16)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          16
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x16 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /*   */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ! */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* " */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x00, \
+		0x48, 0x00, 0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0xFC, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* # */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x3C, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x78, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* $ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, \
+		0xA4, 0x00, 0xA8, 0x00, 0x48, 0x00, 0x10, 0x00, 0x14, 0x00, \
+		0x2A, 0x00, 0x4A, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* % */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x8A, 0x00, \
+		0x8A, 0x00, 0x8C, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* & */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ' */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ( */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ) */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x10, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* * */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* + */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x00, 0x20, 0x00, \
+		0x00, 0x00, /* , */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* - */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* . */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* / */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 0 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 1 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 2 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x88, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 3 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0xFC, 0x00, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 4 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 5 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xB0, 0x00, 0xC8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 6 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 7 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 8 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* 9 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* : */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x60, 0x00, 0x60, 0x00, 0xC0, 0x00, 0x80, 0x00, \
+		0x00, 0x00, /* ; */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x04, 0x00, 0x18, 0x00, 0x60, 0x00, 0x80, 0x00, \
+		0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* < */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* = */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x40, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x02, 0x00, \
+		0x0C, 0x00, 0x30, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* > */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ? */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x3C, 0x00, 0x42, 0x00, 0xBA, 0x00, 0xAA, 0x00, 0xAA, 0x00, \
+		0xAA, 0x00, 0xBC, 0x00, 0x40, 0x00, 0x3C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* @ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, \
+		0x44, 0x00, 0x82, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* A */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* B */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x44, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* C */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* D */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* E */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x78, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* F */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x44, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x44, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* G */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* H */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* I */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* J */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* K */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* L */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xCC, 0x00, 0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* M */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x8C, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* N */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* O */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* P */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x30, 0x00, 0x20, 0x00, 0x1C, 0x00, \
+		0x00, 0x00, /* Q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x90, 0x00, \
+		0x88, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* R */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x04, 0x00, \
+		0x04, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* S */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* T */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* U */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* V */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x78, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* W */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x44, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* X */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* Z */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* [ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* \ */ \
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ] */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ^ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* _ */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* ` */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x04, 0x00, 0x04, 0x00, 0x7C, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* a */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x88, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* b */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* c */ \
+		0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, \
+		0x02, 0x00, 0x3E, 0x00, 0x42, 0x00, 0x82, 0x00, 0x82, 0x00, \
+		0x82, 0x00, 0x42, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* d */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x82, 0x00, 0x82, 0x00, 0xFE, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* e */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* f */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x8C, 0x00, 0x74, 0x00, 0x04, 0x00, 0x44, 0x00, \
+		0x38, 0x00, /* g */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* h */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* i */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0xE0, 0x00, /* j */ \
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xE0, 0x00, \
+		0x90, 0x00, 0x88, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* k */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* l */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xAC, 0x00, 0xD4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x94, 0x00, 0x94, 0x00, 0x94, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* m */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* n */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* o */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, /* p */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x04, 0x00, /* q */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xCC, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* r */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x04, 0x00, 0x04, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* s */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* t */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* u */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* v */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x84, 0x00, 0x84, 0x00, 0xB4, 0x00, 0xB4, 0x00, \
+		0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* w */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x44, 0x00, 0x28, 0x00, 0x28, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* x */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x82, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x28, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, /* y */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* z */ \
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* { */ \
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* | */ \
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, /* } */ \
+	};
+#elif defined(USE_FONT_BPMONO_10x14)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          14
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "BPmono" font (http://www.backpacker.gr) at size 10x14 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x6C, 0x00, 0x6C, 0x00, 0x6C, 0x00, \
+		0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, \
+		0x7C, 0x00, 0x28, 0x00, 0x28, 0x00, 0x7C, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x04, 0x00, 0x78, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xA4, 0x00, \
+		0xA8, 0x00, 0x50, 0x00, 0x28, 0x00, 0x54, 0x00, 0x94, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x90, 0x00, \
+		0x90, 0x00, 0x60, 0x00, 0x94, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x28, 0x00, 0x10, 0x00, 0x7C, 0x00, 0x10, 0x00, \
+		0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0xFE, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x10, 0x00, 0x30, 0x00, 0x20, 0x00, 0x00, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x8C, 0x00, 0x94, 0x00, 0xA4, 0x00, 0xC4, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x18, 0x00, \
+		0x28, 0x00, 0x48, 0x00, 0x88, 0x00, 0xFC, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x60, 0x00, 0x40, 0x00, 0x00, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, \
+		0x42, 0x00, 0x9A, 0x00, 0xAA, 0x00, 0xAA, 0x00, 0xBE, 0x00, \
+		0x80, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, \
+		0x28, 0x00, 0x44, 0x00, 0x7C, 0x00, 0x44, 0x00, 0x44, 0x00, \
+		0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x40, 0x00, \
+		0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x40, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x9C, 0x00, 0x84, 0x00, 0x44, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x88, 0x00, \
+		0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xCC, 0x00, \
+		0xCC, 0x00, 0xB4, 0x00, 0xB4, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0xC4, 0x00, \
+		0xC4, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0x94, 0x00, 0x94, 0x00, \
+		0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x18, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x60, 0x00, 0x18, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xA8, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x04, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0x40, 0x00, 0x40, 0x00, 0x70, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x28, 0x00, 0x44, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x08, 0x00, 0x08, 0x00, 0x78, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF8, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, 0x04, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x8C, 0x00, \
+		0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0xFC, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x78, 0x00, 0x00, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x88, 0x00, 0x90, 0x00, 0xA0, 0x00, 0xD0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA4, 0x00, 0xFC, 0x00, 0xA4, 0x00, 0xA4, 0x00, 0xA4, 0x00, \
+		0xA4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xB8, 0x00, 0xC4, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x7C, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x84, 0x00, \
+		0x7C, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x60, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x80, 0x00, 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, \
+		0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0xFC, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, \
+		0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x84, 0x00, 0x84, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x10, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x10, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_MONO_MMM_10x12)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           10
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          12
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		/* "MonoMMM" font (http://www.dafont.com/monommm-5.font) size 10x12 */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /*   */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ! */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x50, 0x00, \
+		0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* " */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0xF8, 0x00, \
+		0x50, 0x00, 0xF8, 0x00, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* # */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x70, 0x00, 0xA8, 0x00, \
+		0xA0, 0x00, 0x70, 0x00, 0x28, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* $ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC8, 0x00, 0xB0, 0x00, \
+		0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0x68, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* % */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x90, 0x00, \
+		0xA0, 0x00, 0x40, 0x00, 0xA8, 0x00, 0x90, 0x00, 0x68, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* & */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ' */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* ( */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* ) */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x70, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* * */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xF8, 0x00, 0x20, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* + */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* , */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* - */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* . */	\
+		0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x10, 0x00, 0x20, 0x00, 0x60, 0x00, 0x40, 0x00, \
+		0xC0, 0x00, 0x00, 0x00, /* / */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x98, 0x00, 0xA8, 0x00, 0xC8, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 0 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0xE0, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 1 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 2 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x30, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 3 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, \
+		0x50, 0x00, 0x90, 0x00, 0xF8, 0x00, 0x10, 0x00, 0x10, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 4 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 5 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 6 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 7 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 8 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x78, 0x00, 0x08, 0x00, 0x08, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* 9 */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* : */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, /* ; */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x10, 0x00, 0x08, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* < */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* = */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* > */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ? */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0xB8, 0x00, 0xA8, 0x00, 0xB8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* @ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* A */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* B */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* C */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* D */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* E */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* F */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x98, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* G */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* H */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* I */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x08, 0x00, 0x08, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* J */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x00, 0xB0, 0x00, \
+		0xE0, 0x00, 0xC0, 0x00, 0xE0, 0x00, 0xB0, 0x00, 0x98, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* K */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* L */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xD8, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* M */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0xC8, 0x00, \
+		0xC8, 0x00, 0xA8, 0x00, 0x98, 0x00, 0x98, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* N */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* O */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* P */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xA8, 0x00, 0x70, 0x00, \
+		0x08, 0x00, 0x00, 0x00, /* Q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* R */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, \
+		0x80, 0x00, 0x70, 0x00, 0x08, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* S */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* T */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* U */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* V */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x88, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* W */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x70, 0x00, 0x50, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* X */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x00, 0x50, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x08, 0x00, \
+		0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* Z */	\
+		0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x30, 0x00, 0x00, 0x00, /* [ */	\
+		0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x40, 0x00, 0x60, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x04, 0x00, 0x00, 0x00, /* \ */	\
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x60, 0x00, 0x00, 0x00, /* ] */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x50, 0x00, \
+		0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ^ */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0xFC, 0x00, /* _ */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* ` */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x08, 0x00, 0xF8, 0x00, 0x88, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* a */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* b */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x80, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* c */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* d */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0xF8, 0x00, 0x80, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* e */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x20, 0x00, \
+		0x70, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* f */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* g */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* h */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0x60, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* i */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, \
+		0xE0, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0xC0, 0x00, /* j */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x98, 0x00, 0xA0, 0x00, 0xE0, 0x00, 0x90, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* k */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* l */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* m */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* n */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x70, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x70, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* o */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF0, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x00, \
+		0x80, 0x00, 0x80, 0x00, /* p */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x78, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x08, 0x00, /* q */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x88, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* r */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x80, 0x00, 0xF8, 0x00, 0x08, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* s */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x78, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x18, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* t */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* u */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x50, 0x00, 0x50, 0x00, 0x50, 0x00, 0x20, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* v */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0xA8, 0x00, 0x50, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* w */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xD8, 0x00, 0x50, 0x00, 0x20, 0x00, 0x50, 0x00, 0xD8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* x */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0x78, 0x00, \
+		0x08, 0x00, 0x70, 0x00, /* y */	\
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+		0xF8, 0x00, 0x10, 0x00, 0x20, 0x00, 0x40, 0x00, 0xF8, 0x00, \
+		0x00, 0x00, 0x00, 0x00, /* z */	\
+		0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x10, 0x00, 0x00, 0x00, /* { */	\
+		0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x00, 0x00, /* | */	\
+		0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x20, 0x00, 0x10, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, \
+		0x40, 0x00, 0x00, 0x00, /* } */	\
+	};
+#elif defined(USE_FONT_BASIC_6x7)
+/** Width of each glyph, including spacer column. */
+#  define SYSFONT_WIDTH           6
+/** Height of each glyph, excluding spacer line. */
+#  define SYSFONT_HEIGHT          7
+/** Line height. */
+#  define SYSFONT_LINESPACING     8
+/** First character defined. */
+#  define SYSFONT_FIRSTCHAR       ((uint8_t)' ')
+/** Last character defined. */
+#  define SYSFONT_LASTCHAR        ((uint8_t)'}')
+
+/** Define variable containing the font */
+#  define SYSFONT_DEFINE_GLYPHS \
+        /* Glyph data, row by row, MSB is leftmost pixel, one byte per row. */ \
+	static PROGMEM_DECLARE(uint8_t, sysfont_glyphs[]) = { \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,          /* " " */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x20,          /* "!" */ \
+		0x50, 0x50, 0x50, 0x00, 0x00, 0x00, 0x00,          /* """ */ \
+		0x50, 0x50, 0xf8, 0x50, 0xf8, 0x50, 0x50,          /* "#" */ \
+		0x20, 0x78, 0xa0, 0x70, 0x28, 0xf0, 0x20,          /* "$" */ \
+		0xc0, 0xc8, 0x10, 0x20, 0x40, 0x98, 0x18,          /* "%" */ \
+		0x60, 0x90, 0xa0, 0x40, 0xa8, 0x90, 0x68,          /* "&" */ \
+		0x60, 0x20, 0x40, 0x00, 0x00, 0x00, 0x00,          /* "'" */ \
+		0x10, 0x20, 0x40, 0x40, 0x40, 0x20, 0x10,          /* "(" */ \
+		0x40, 0x20, 0x10, 0x10, 0x10, 0x20, 0x40,          /* ")" */ \
+		0x00, 0x50, 0x20, 0xf8, 0x20, 0x50, 0x00,          /* "*" */ \
+		0x00, 0x20, 0x20, 0xf8, 0x20, 0x20, 0x00,          /* "+" */ \
+		0x00, 0x00, 0x00, 0x00, 0x60, 0x20, 0x40,          /* "," */ \
+		0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00,          /* "-" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60,          /* "." */ \
+		0x00, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00,          /* "/" */ \
+		0x70, 0x88, 0x98, 0xa8, 0xc8, 0x88, 0x70,          /* "0" */ \
+		0x20, 0x60, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "1" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x40, 0xf8,          /* "2" */ \
+		0xf8, 0x10, 0x20, 0x10, 0x08, 0x88, 0x70,          /* "3" */ \
+		0x10, 0x30, 0x50, 0x90, 0xf8, 0x10, 0x10,          /* "4" */ \
+		0xf8, 0x80, 0xf0, 0x08, 0x08, 0x88, 0x70,          /* "5" */ \
+		0x30, 0x40, 0x80, 0xf0, 0x88, 0x88, 0x70,          /* "6" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x40, 0x40,          /* "7" */ \
+		0x70, 0x88, 0x88, 0x70, 0x88, 0x88, 0x70,          /* "8" */ \
+		0x70, 0x88, 0x88, 0x78, 0x08, 0x10, 0x60,          /* "9" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x60, 0x00,          /* ":" */ \
+		0x00, 0x60, 0x60, 0x00, 0x60, 0x20, 0x40,          /* ";" */ \
+		0x08, 0x10, 0x20, 0x40, 0x20, 0x10, 0x08,          /* "<" */ \
+		0x00, 0x00, 0xf8, 0x00, 0xf8, 0x00, 0x00,          /* "=" */ \
+		0x80, 0x40, 0x20, 0x10, 0x20, 0x40, 0x80,          /* ">" */ \
+		0x70, 0x88, 0x08, 0x10, 0x20, 0x00, 0x20,          /* "?" */ \
+		0x70, 0x88, 0x08, 0x68, 0xa8, 0xa8, 0x70,          /* "@" */ \
+		0x70, 0x88, 0x88, 0x88, 0xf8, 0x88, 0x88,          /* "A" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x88, 0x88, 0xf0,          /* "B" */ \
+		0x70, 0x88, 0x80, 0x80, 0x80, 0x88, 0x70,          /* "C" */ \
+		0xe0, 0x90, 0x88, 0x88, 0x88, 0x90, 0xe0,          /* "D" */ \
+		0xf8, 0x80, 0x80, 0xf0, 0x80, 0x80, 0xf8,          /* "E" */ \
+		0xf8, 0x80, 0x80, 0xe0, 0x80, 0x80, 0x80,          /* "F" */ \
+		0x70, 0x88, 0x80, 0x80, 0x98, 0x88, 0x70,          /* "G" */ \
+		0x88, 0x88, 0x88, 0xf8, 0x88, 0x88, 0x88,          /* "H" */ \
+		0x70, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "I" */ \
+		0x38, 0x10, 0x10, 0x10, 0x10, 0x90, 0x60,          /* "J" */ \
+		0x88, 0x90, 0xa0, 0xc0, 0xa0, 0x90, 0x88,          /* "K" */ \
+		0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8,          /* "L" */ \
+		0x88, 0xd8, 0xa8, 0x88, 0x88, 0x88, 0x88,          /* "M" */ \
+		0x88, 0x88, 0xc8, 0xa8, 0x98, 0x88, 0x88,          /* "N" */ \
+		0x70, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "O" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0x80, 0x80, 0x80,          /* "P" */ \
+		0x70, 0x88, 0x88, 0x88, 0xa8, 0x90, 0x68,          /* "Q" */ \
+		0xf0, 0x88, 0x88, 0xf0, 0xa0, 0x90, 0x88,          /* "R" */ \
+		0x78, 0x80, 0x80, 0x70, 0x08, 0x08, 0xf0,          /* "S" */ \
+		0xf8, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "T" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x70,          /* "U" */ \
+		0x88, 0x88, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "V" */ \
+		0x88, 0x88, 0x88, 0xa8, 0xa8, 0xd8, 0x88,          /* "W" */ \
+		0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0x88,          /* "X" */ \
+		0x88, 0x88, 0x50, 0x20, 0x20, 0x20, 0x20,          /* "Y" */ \
+		0xf8, 0x08, 0x10, 0x20, 0x40, 0x80, 0xf8,          /* "Z" */ \
+		0x38, 0x20, 0x20, 0x20, 0x20, 0x20, 0x38,          /* "[" */ \
+		0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x00,          /* "\" */ \
+		0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0,          /* "]" */ \
+		0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00,          /* "^" */ \
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,          /* "_" */ \
+		0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00,          /* "`" */ \
+		0x00, 0x00, 0x70, 0x08, 0x78, 0x88, 0x78,          /* "a" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0xf0,          /* "b" */ \
+		0x00, 0x00, 0x70, 0x80, 0x80, 0x88, 0x70,          /* "c" */ \
+		0x08, 0x08, 0x68, 0x98, 0x88, 0x88, 0x78,          /* "d" */ \
+		0x00, 0x00, 0x70, 0x88, 0xf8, 0x80, 0x70,          /* "e" */ \
+		0x30, 0x48, 0x40, 0xe0, 0x40, 0x40, 0x40,          /* "f" */ \
+		0x00, 0x00, 0x78, 0x88, 0x78, 0x08, 0x30,          /* "g" */ \
+		0x80, 0x80, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "h" */ \
+		0x20, 0x00, 0x60, 0x20, 0x20, 0x20, 0x70,          /* "i" */ \
+		0x10, 0x00, 0x30, 0x10, 0x10, 0x90, 0x60,          /* "j" */ \
+		0x40, 0x40, 0x48, 0x50, 0x60, 0x50, 0x48,          /* "k" */ \
+		0x60, 0x20, 0x20, 0x20, 0x20, 0x20, 0x70,          /* "l" */ \
+		0x00, 0x00, 0xd0, 0xa8, 0xa8, 0x88, 0x88,          /* "m" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x88, 0x88, 0x88,          /* "n" */ \
+		0x00, 0x00, 0x70, 0x88, 0x88, 0x88, 0x70,          /* "o" */ \
+		0x00, 0x00, 0xf0, 0x88, 0xf0, 0x80, 0x80,          /* "p" */ \
+		0x00, 0x00, 0x68, 0x98, 0x78, 0x08, 0x08,          /* "q" */ \
+		0x00, 0x00, 0xb0, 0xc8, 0x80, 0x80, 0x80,          /* "r" */ \
+		0x00, 0x00, 0x70, 0x80, 0x70, 0x08, 0xf0,          /* "s" */ \
+		0x40, 0x40, 0xe0, 0x40, 0x40, 0x48, 0x30,          /* "t" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x98, 0x68,          /* "u" */ \
+		0x00, 0x00, 0x88, 0x88, 0x88, 0x50, 0x20,          /* "v" */ \
+		0x00, 0x00, 0x88, 0x88, 0xa8, 0xa8, 0x50,          /* "w" */ \
+		0x00, 0x00, 0x88, 0x50, 0x20, 0x50, 0x88,          /* "x" */ \
+		0x00, 0x00, 0x88, 0x88, 0x78, 0x08, 0x70,          /* "y" */ \
+		0x00, 0x00, 0xf8, 0x10, 0x20, 0x40, 0xf8,          /* "z" */ \
+		0x10, 0x20, 0x20, 0x40, 0x20, 0x20, 0x10,          /* "{" */ \
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,          /* "|" */ \
+		0x40, 0x20, 0x20, 0x10, 0x20, 0x20, 0x40,          /* "}" */ \
+	};
+#endif
+
+/** @} */
+
+#endif /* CONF_SYSFONT_H */
diff --git a/common2/services/gfx_mono/sysfont.c b/common2/services/gfx_mono/sysfont.c
new file mode 100644
index 00000000..cd0d0275
--- /dev/null
+++ b/common2/services/gfx_mono/sysfont.c
@@ -0,0 +1,75 @@
+/**
+ * \file
+ *
+ * \brief Graphical font support
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <assert.h>
+
+#include "conf_sysfont.h"
+
+#include "gfx_mono.h"
+#include "sysfont.h"
+
+// Use macro from conf_sysfont.h to define font glyph data.
+SYSFONT_DEFINE_GLYPHS;
+
+/**
+ * \brief Initialize a basic system font
+ *
+ * This initializes a basic system font globally usable by the application.
+ */
+struct font sysfont = {
+	.type           = FONT_LOC_PROGMEM,
+	.width          = SYSFONT_WIDTH,
+	.height         = SYSFONT_HEIGHT,
+	.first_char     = SYSFONT_FIRSTCHAR,
+	.last_char      = SYSFONT_LASTCHAR,
+	.data           = {
+		.progmem        = sysfont_glyphs,
+	},
+};
+
+/** @} */
diff --git a/common2/services/gfx_mono/sysfont.h b/common2/services/gfx_mono/sysfont.h
new file mode 100644
index 00000000..837d7c30
--- /dev/null
+++ b/common2/services/gfx_mono/sysfont.h
@@ -0,0 +1,70 @@
+/**
+ * \file
+ *
+ * \brief Graphical System Font system
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef SYSFONT_H_INCLUDED
+#define SYSFONT_H_INCLUDED
+
+#include "conf_sysfont.h"
+#include "gfx_mono.h"
+#include "gfx_mono_text.h"
+
+/**
+ * \ingroup asfdoc_common2_gfx_mono_font
+ * \defgroup asfdoc_common2_gfx_mono_sysfont System font
+ *
+ * The system font objects are globally available for a graphical application.
+ * System fonts are by design read only, hence there are not any functions to
+ * change them during runtime. If the application needs additional fonts it
+ * should add additional font objects.
+ * \section asfdoc_common2_gfx_mono_sysfont_api_overview API Overview
+ * @{
+ */
+
+extern struct font sysfont;
+
+/** @} */
+
+#endif /* SYSFONT_H_INCLUDED */
diff --git a/common2/services/gfx_mono/tools/bitmap.py b/common2/services/gfx_mono/tools/bitmap.py
new file mode 100644
index 00000000..fcddb9ca
--- /dev/null
+++ b/common2/services/gfx_mono/tools/bitmap.py
@@ -0,0 +1,58 @@
+##
+# \file
+#
+# \brief Output a 2 color bitmap as an uint8_t array
+#
+# Copyright (C) 2011-2014 Atmel Corporation. All rights reserved.
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+# Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+from PIL import Image
+import sys
+
+im = Image.open(sys.argv[1]);
+new_im = im.load()
+
+width, height = im.size
+
+for y in range(0, height) :
+	for x in range(0, width) :
+		if 0 < new_im[x, y]:
+			new_im[x, y] = 1
+		sys.stdout.write(str(new_im[x, y]))
+	sys.stdout.write("\n")
+
+sys.stdout.write("\n uint8_t image_header[] = {\n")
+for y in range(0, height, 8) :
+	for x in range(0, width) :
+		first_byte = str(new_im[x, y + 7]) + str(new_im[x, y+6]) + str(new_im[x, y+5]) + str(new_im[x, y+4]) + str(new_im[x, y+3]) + str(new_im[x, y+2]) + str(new_im[x, y+1]) + str(new_im[x, y+0])
+		print "0x%x," % int(first_byte, 2),
+
+sys.stdout.write("};\n")
diff --git a/common2/services/gfx_mono/tools/dump_display_over_serial.py b/common2/services/gfx_mono/tools/dump_display_over_serial.py
new file mode 100644
index 00000000..5b532420
--- /dev/null
+++ b/common2/services/gfx_mono/tools/dump_display_over_serial.py
@@ -0,0 +1,133 @@
+##
+# \file
+#
+# \brief Convert display data on a serial line to a graphical representation
+#
+# Copyright (C) 2011-2014 Atmel Corporation. All rights reserved.
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+# Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+import sys
+import serial
+import os.path
+import argparse
+
+def scan_for_ports():
+	available_ports = []
+
+	for index in range(64):
+		try:
+			serial_port = serial.Serial(index)
+			available_ports.append((index, serial_port.portstr))
+			serial_port.close()
+		except serial.SerialException:
+			pass
+		except IndexError as Error:
+			pass
+
+	for port_number, port_name in available_ports:
+		print "%02d - %s" % (port_number, port_name)
+
+	return available_ports
+
+def dump_display_data(serial_port, baud_rate, output_file_name):
+	try:
+		output_file = open(output_file_name, 'w')
+		port        = serial.Serial(port = serial_port,
+				baudrate = baud_rate, timeout = 1)
+		port.close()
+		port.open()
+	except ValueError as e:
+		print "error: invalid serial port parameters. %s" % (str(e))
+		output_file.close()
+		return -1
+	except serial.SerialException as e:
+		print "error: could not open serial port. %s" % (str(e))
+		output_file.close()
+		return -1
+	except IOError as e:
+		print "error: could not open output file. %s" % (str(e))
+		return -1
+
+	print "Display on %s: %u,8,N,1" % (port.name, port.baudrate)
+	port.write("D")
+	line = port.readline()
+	display_data = ""
+	while(line[:2] != "};") :
+		display_data = display_data + line[:-1]
+		line = port.readline()
+	display_data = display_data + line
+	port.close()
+
+	print "Writing data to file %s" % (output_file_name)
+	output_file.write(display_data)
+
+	output_file.close()
+
+def main():
+	parser = argparse.ArgumentParser(description="This script will try to "
+			"open the given serial port, send a string to "
+			"instruct the target device to dump the contents of "
+			"the display to a serial link in XPM format. The "
+			"received file is then written to 'display.xpm', "
+			"unless a file is specified by the -o option.")
+	parser.add_argument("-p", "--port", dest="serial_port",
+			help="which serial port to open")
+	parser.add_argument("-b", "--baud", dest="baudrate", type=int,
+			help="baud rate to use for serial communication",
+			default=19200)
+	parser.add_argument("-o", "--output", dest="output_file",
+			help="write XPM image to FILE. Default is display.xpm.",
+			metavar="FILE", default="display.xpm")
+	parser.add_argument("-s", "--scan", action="store_true",
+			dest="scan_ports",
+			help="scan for available serial ports and exit",
+			default=False)
+
+	arguments = parser.parse_args()
+
+	if arguments.scan_ports:
+		scan_for_ports()
+		sys.exit()
+
+	if arguments.serial_port is None:
+		parser.print_usage()
+		sys.exit()
+
+	if os.path.exists(arguments.output_file):
+		print "Warning: output file '%s' already exists" % (arguments.output_file)
+		print "Do you want to write over file '%s'?" % (arguments.output_file)
+		answer = raw_input("[yes/NO] ")
+		if answer not in ("yes", "Yes", "YES"):
+			sys.exit()
+
+	dump_display_data(arguments.serial_port, arguments.baudrate, arguments.output_file)
+
+if __name__ == "__main__":
+	main()
diff --git a/common2/services/gfx_mono/tools/readme.txt b/common2/services/gfx_mono/tools/readme.txt
new file mode 100644
index 00000000..ebe2b166
--- /dev/null
+++ b/common2/services/gfx_mono/tools/readme.txt
@@ -0,0 +1,6 @@
+
+dump_display_over_serial.py
+	Convert display data on a serial line to a .XPM file
+
+bitmap.py
+	Convert an indexed 2 color bitmap to an uint8_t array